WRT54G and E.mail checking thru 3rd party applications

Hello,
Just a few days ago I was installing brand new WRT54G ver.6 at my friend's house. I made sure there is not interference with any other surrounding wireless networks and also properly secured router.
I ve tried connect 2 different computers. First one: HP laptop had no problems with it whatsoever but using my PDA (Dell Axim x51v) I was able to connect to network and browse internet but when I tried download E.mail using build-in e.Mail sofware it didn't work. I got message: connection has been lost and I should try to reconnect or check E.mail settings in my 3rd party software.
When I changed router back to "old" one (D-link 524)... no problems. So I assumed there must be some setup problem.
At my house I use WRT54GS ver.2 and it works like a charm.
Any idea how to go over it?
Maciej

I would compare settings and make sure you have matched them exactly the same as the working setup. Make screen prints of working setup and take them with you.

Similar Messages

Clusterware Pricing and/or Licensing Information for 3rd Party Applications

Hi,
Can anyone please direct me to Oracle Clusterware 11g pricing and/or licensing information in the scenario where the Clusterware solution is intended for use with a 3rd party application and not with Oracle Database?
Also, in the case where Clusterware is used with Oracle Database 11g Enterprise, does it require a separate license?
I appreciate if anyone can provide me with a link to this type of information.
Thanks in advance!
Best regards,
Johan

OK - So if there is no RAC installed and you all you need to do is provide Cold failover for an Oracle database instance then yes the Clusterware license is at no charge in this scenario.
briefly :
you install a Clusterware home - as if you were goin gto create a RAC database
then you install a database software home on each node.
then you create the instance.
there is a good paper here : http://otn.oracle.com/clusterware
See : Using Oracle Clusterware to Protect A Single Instance Oracle Database 11g (PDF) February 2008
If the software you are wanting to protect 'talks' to an Oracle database
You can either install on the RAC nodes - using the clusterware that is already there
OR
install Oracle clusterware onto 2 or 3 or more new nodes to build an new application cluster and then install your application.
Either way both meet the terms of the license doc.
Philip...

How to: Send out e-mails through a 3rd party mail host?

Hi,
We would like to send out e-mail campaign from our CRM system.
But we would not like to risc being blacklisted as spammer, so we would like to send out the e-mails using a 3rd party mail host provider.
Our sales department already use our CRM system for sending out their sales related e-mails.
They use our corporate exchange server for that.
So the scenario is:
I have created a smtp node in trx scot, and liked it to our domain *company.com
This node points to our corporate mail host. All our normal users use this domain.
All our campaign e-mails from CRM should be send using another mail host as described before.
According to note 455140, I don't see that I can create a new smtp node in scot.
And link this one to our new e-mail domain *company-news.com and the external mail host.
How do I send these e-mails to a specific mail host when the sender is a specific domain e.g. company-news.com?
My Exchange server guys say that they can't redirect specific mails send from our CRM system.
They can only redirect all mails that are send from our CRM system, but then all the e-mails from our sales reps are also send through a 3rd party mail host.
Does anyone have battled with this before, and how did you solve it?
best regards
Michael Wolff Knudsen

We bought a new Exchange server, version 2007 just for CRM. This Exchange version can tunnel the e-mail to our 3rd party vendor, and they can send out the e-mails so neither one of us gets spammed.

Trouble with e-mail & internet access 3rd party so...

hello,
for a while use the nokia 9300i, as i wanted to have easy access to email & internet. after we changed the domain from one server to another it was no longer possible to download e-mail messages, even though user name and everything stayed the same. proof: for my colleague with such a q-tek device everything still works
what happens is that if i try to retrieve e-mail the communicator makes connection with the account, by establishing network connection which works out ok. after that it displays the message
connecting to '([email protected])'
retrieving mesage header 1 of xx
and that is it. does someone has any clue how this could be resolved? i am considering buying an e90, but except for my doubts on that, it might just not work on that device either.
a second thing is that 3rd party applications such as navfun, nimbuzz and mini-opera fail to connect to internet. should this be enabled as allowed or trusted application or is it something else? my gprs connection works fine for using the webbrowser and using the phone as modem.
i would be thrilled if someone would have any idea...
thanks in advance
krukkic

So, what would you use if you had several computers your email came to?
IMAP for certain.
Lastly, will IMAP work on Verizon's Blackberry.
Not certain not having a BB, bit I+ suspect so.
although that might have something to do with some of the other problems I'm having with the email on the Mac.
Let's work on that angle.
Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.
If that doesn't do it and you can afford to redo all your Rules, try these & reboot...
/Users/YourUserName/Library/Mail/MessageRules.plist
/Users/YourUserName/Library/Mail/MessageRules.plist.backup

3rd party application and address book

Hi Guys
This happens on a regular basis
I use a 3rd party application called photo mechanic which is a n image browser from www.camerabits.com
It has a feature where you can email the images using the mail application of your choice(my choice is mail) using the addresses in your address book.
While sending multiple images often the whole process comes to a grinding halt as the address book is stripped of all it's contents, I back up the address book every time I add an address so it does not cause me to loose the information.
Just wandering if anyone might have an idea what is causing this, the reason I ask in this forum is that the 3rd party developer says it must be an issue with mail as he knows of no other issues.
I should add that I have no technical information as the error means a restart so nothing is recorded (that I am aware of)
The images are added as attachments of usually 300k to 500k in size one per email
Any help or ideas

Joe Chiarelli wrote:
Any suggestions for integrating iweb with static html pages created by 3rd party apps?
Joe ~ Since iWeb can't import HTML pages, one suggestion is to publish your current sites to the same iDisk space iWeb uses by following the instructions in this Apple doc:
MobileMe: How to publish a custom website
...This would put your sites in Web > Sites folder and the URL would be:
http://web.me.com/membername/foldername/
Then you could remove your sites occupying the "HomePage" area, i.e. the Sites folder on iDisk.

IPod Touch 2.0 Crashes 3rd Party Applications, Erases Music and Videos.

I don't know if this has been happening to some people. I hear it's mainly for FW 2.0.1, but I have 2.0 and I'm afraid to upgrade. Listen to this:
It's been over a little over a month since I upgraded my iPod to 2.0. I'm browsing through my apps from the AppStore. All of a sudden I open an application my iPod reboots, crashes. Not only that, but I had to wait at least 4min for the iPod to reboot. It *****.
After it finally reboot, I opened up a 3rd party application, it opens the main screen, and crashes, bringing me back to the SpringBoard.
This happens to all of my 3rd Party Apps.
BUT THAT'S NOT ALL: MY MUSIC AND VIDEOS HAVE BEEN ERASED.
When I plug the iPod into iTunes on my Mac, it thinks the iPod still has music and videos on it. It ***** having to restore every single day.
Please help me, anybody. I know this has been an issue for those with 2.0.1. Here are my questions:
-Should I be afraid to upgrade to 2.0.1?
-How can I stop the crashing of 3rd Party Apps, as well as the erase of music and videos?
-Can I do this, so I don't have to restore?
Any help would be appreciated,
Thank you in advance,
Xander2008

This is happening to a lot of people. Check out the discussions all the way back even prior to August.
No one seems to know the cause but there are many solutions offered to try. You will have to restore or do a full recovery depending on your situation. Again...lots of advice on how to do both in prior discussions.
Do not restore from a back up. Rather, set your ipod up as a new ipod and give it a new name. Begin by loading your music and videos etc. from your stored library on your pc. You'll find your itouch works like new.
Next before loading in any applications, review the app store pages selling each app and determine which ones have bugs and crashing issues they are working on or have corrected in their app updates. I've narrowed it down to possibly Advent, Aurora Feint or Converter in my case. We have over 90 free and purchased apps in our library but we have kept it to a bare minimum or 25-30 apps.
I've also read somewhere in these discussions that the larger mb apps could be at issue with the 2.0 and 2.0.1 updates and something to do with firmware updates? Sorry but I'm not real saavy with the technical side of it but i can tell you that between our two ipod touches we restored/recovered over 16 times from 8/04 to 8/10 because of crashes.
So far we've been lucky and have been up an running bug free for 3 days. Also, one app started acting strange after i tested it upon syncing so i connected back up to the pc and removed it...that's when i checked online and saw it too had crash issues they were working on.
They say you can have as many apps as you want on your itouch, so far i'm not testing that theory again...we're taking it slow and choose only what we really really want on our ipod...some say stay away from the gimmicky apps but we have a few on ours that are still working well, crazy lighter, iguide, itarot, campfire, magic8ball...so trust yourself and those that have provided info as well in previous discussions.
try to find the post from dbmandrake re workarounds for 2.0.1 app install crashes dated 8/9/08...it made sense and got me rolling again.

Opening and closing 3rd party applications ??

Does opening and closing 3rd party applications with the click of the home button actually close the application, or, does it continue running in the back ground ?
I noticed most of the 3rd party application don't have a close/exit option, and wonder if opening and closing several applications with the home button can cause the many crashes I have read from fellow iPhone owners ?

Clicking the Home button may close the application depending on the application itself. Some applications that use the network may close when going to the Home screen. To force quit any application, hold the Home button down for about 6 seconds until the Home screen comes up.

Upgrade to Windows 8.1 Pro Update 1 and it killed all my 3rd party drivers

Hoping someone can help - my PC upgraded Windows 8.1 Pro (fresh install a few months ago) with the 'Update 1 patch' which was made available a few days ago. It was done via Windows Update - I let it do its thing for about 15 minutes, restart etc.
Once the machine restarted, I noticed the following:
- no network connection
- no sound
- no working camera
I went to the device manager and see a stack of 3rd-party devices with exclamation marks, all stating code 28 (the drivers for this device are not installed). I go to each device and try to update the drivers - it looks like its going to work and then
gives the error "The system cannot find the file specified".
I do some googling and find the setupapi.dev.log. The log for every device with a problem reads like this:
>>> [Device Install (DiShowUpdateDevice) - HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001]
>>> Section start 2014/04/12 01:23:46.588
cmd: "C:\Windows\system32\mmc.exe" C:\Windows\system32\devmgmt.msc
dvi: {DIF_UPDATEDRIVER_UI} 01:23:46.608
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:46.647
dvi: Default installer: Exit
dvi: {DIF_UPDATEDRIVER_UI - exit(0xe000020e)} 01:23:46.686
ndv: {Update Driver Software Wizard for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
!!! ndv: Driver package import failed for device.
!!! ndv: Error 2: The system cannot find the file specified.
ndv: Installing NULL driver.
dvi: {Plug and Play Service: Device Install for HDAUDIO\FUNC_01&VEN_10EC&DEV_0900&SUBSYS_1043859D&REV_1000\4&83A6FBB&0&0001}
! ndv: Installing NULL driver!
dvi: {DIF_ALLOW_INSTALL} 01:23:48.883
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.883
dvi: Default installer: Exit
dvi: {DIF_ALLOW_INSTALL - exit(0xe000020e)} 01:23:48.884
dvi: {DIF_REGISTER_COINSTALLERS} 01:23:48.884
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: Default installer: Enter 01:23:48.885
dvi: Default installer: Exit
dvi: {DIF_REGISTER_COINSTALLERS - exit(0x00000000)} 01:23:48.885
dvi: {DIF_INSTALLDEVICE} 01:23:48.885
dvi: No class installer for 'Audio Device on High Definition Audio Bus'
dvi: No CoInstallers found
dvi: Default installer: Enter 01:23:48.886
! dvi: Installing NULL driver!
dvi: Install Null Driver: Removing device sub-tree. 01:23:48.887
dvi: Install Null Driver: Removing device sub-tree completed. 01:23:48.890
dvi: Install Null Driver: Restarting device. 01:23:48.892
dvi: Install Null Driver: Restarting device completed. 01:23:48.892
dvi: Install Device: Starting device. 01:23:48.892
dvi: Install Device: Starting device completed. 01:23:48.893
dvi: Default installer: Exit
dvi: {DIF_INSTALLDEVICE - exit(0x00000000)} 01:23:48.894
ump: {Plug and Play Service: Device Install exit(00000000)}
ndv: {Update Driver Software Wizard exit(00000002)}
<<< Section end 2014/04/12 01:23:50.286
<<< [Exit status: FAILURE(0x00000002)]
It seems like 'update 1' as crapped all over my driver store.
What can I do to fix this - I have tried a raft of things such as pnputil commands to add the driver INFs manually (they fail saying 'element not found'), but still I am stuck without sound, network and camera.
This will be the last time I let Microsoft update automatically install - it will now be 100% manual, and done after a few weeks to ensure there aren't bugs.

espero y te sirva este link :)
http://blogs.itpro.es/octaviordz/2014/04/05/actualizar-de-windows-8-1-2012r2-a-windows-8-1-ws2012r2-update-con-script-de-powershell/
Freelance-IT http://www.freelance-it.com.mx

SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching

Hi,
We're getting ready to tackle the phenomena known as Java patching, and I was wondering if I could get your personal preference; SCCM Software Updates (and SCUP) vs. Application Management for 3rd Party Application Patching?
I probably should give a little background on my environment; It's a university atmosphere, so unless it's policy, you have to ask nicely...can't tell people to do things they don't want to; multiple version of required versions of Java for what ever reason,
which need to be identified, grouped together, and then upgrade as much as possible without breaking their old applications.
I was thinking that Application Management probably made more sense where it is more robust, especially for removing multiple installs of Java on a single system, but Software Updates/SCUP looks like it was built for this type of patching, so I'm a bit confused
why SCCM would have two components which essentially did the same thing.
Your thoughts?
Thanks,
Bill

For Java version management specifically you can already achieve a lot by using the Application Model in CM12.
You can define supersedence between the different versions, just make sure to opt for uninstall of the older version when defining it.

Get message saying that info sent is unencrypted and can be read by 3rd party

I recently receive a message when I open up Firefox that the page is encrypted but info sent will be sent over an unencrypted connection and may be seen by 3rd party

I recently receive a message when I open up Firefox that the page is encrypted but info sent will be sent over an unencrypted connection and may be seen by 3rd party

RFC( SAP R/3) to XI to 3rd party Application

Hi All,
we have an 3rd party application to which we want to send some data from R/3. We are using XI as the middleware.The process has to be triggered from R/3 side. We are not using Idoc's here. We are planing to use the RFC through which the data transfer has to be done.
We are creating a BAPI with import, export and tables parameters.Basically the RFC is in SAP R/3 System.We need to send the data in the table to XI.
In this case how the RFC destination has to be created and how the RFC to be called in the R/3 system to export the Data to XI system.
Answers are highly appreciated.
Thanx and Regards,
Durga.

Hi,
<i>>>>In this case how the RFC destination has to be created</i>
Check this blog by Michal it shows you step by step
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
<i>>>>how the RFC to be called in the R/3 system to export the Data to XI system.</i>
Hope you are aware of normal way of calling function
CALL Function "FM Name"
Export
Tables
in this case the RFC should be called as follows
CALL Function "FM Name" destination <SM59 Destination>
Export
Tables
The above is for Sync call and if you want to make a Async call that is you are not expecting any reponse from the target then
CALL Function "FM Name" IN BACKGROUND TASK destination <SM59 Destination>
Export
Tables
Thanks,
Prakash

PCLinusOS + WINE but 3rd party applications freeze, help.

Loaded PCLinuxOS 4 times now with WINE in 3 different configs, 3rd party apps always freeze.
They do install but on loading they freeze, always. I've tried 6 different apps. & all freeze.
Admin is logged on & working.
2 HDD's, (HDD-1) NTFS and (HDD-2) Linux boot & swap
Any ideas?
LOL, I'm reading the receint LinuxOS is irritating MicroSoft. HOO-AHH!!!
I do hope Lunux will make more Apps to COMPLETLY replace Windows.
So far Linux is a bear to work with but I'm new to Linux, so go figure, BUT TRYING.
Thanks
fvm @ usa.com

Hi,
I have the same problem since yesterday and now after I have done something follow the instruction from this topic, it is working now!!!
Okay, Here is what I have done;
First:
I hard reset my Iphone; Steps stated as below,
1.) Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
2.) Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
3.) The iPhone should now shutdown automatically - (fade to black)
4.) Turn the iPhone back on by hitting the sleep/wake button.
5.) You should now see the Apple logo, your iPhone is restarting and thus booting up.
6.) You have completed a hard reset successfully.
Second:
I randomly updated one of my application (Hangman - It is a puzzle for word gussing)
The when I finish updating, I go randomly check one of my 3rd party applications, and it is working, and then I tried with others, all working as per normal.
Hope this would help.
P.S. It is indeed very frustrating to facing such an un-pleasant problem, hope apple side can come out with proper solutions in their next updates.

3rd party applications not working (ie: word & photoshop) Help!

Hey,
I have been using my macbook without problems for about 7 months now, but last week it started refusing to open 3rd party applications such as word, or photoshop. I tried every application that wasn't apple software and the only one that works now is ableton live. All the non-working applications are legal, i tried reloading the microsoft office software, and even though the reload was successful, the problem still exists when trying to open any of those applications.
Thanks for any help
Jared Hill

Hi Red and Welcome to Apple Discussions ...
Sometimes when apps won't open, it's because the hard disk is full. Here's how to check to see how much free space is available.
Launch Disk Utility from the Applications/Utilities folder. Select MacintoshHD in the panel on the left. Now, tell her to look at the bottom of that page where it says: Capacity and Available. Rule of thumb... never allow free disk space to fall below 15 - 20%. It takes a minimum of 15% free disk space just to boot a Mac.
If that isn't the issue, because she can't open PS or Word, it might be a corrupted font that she has used in both those applications. Tell her to try this. She needs to find this file:
com.apple.FontBook.plist It's here: /Users/HerName/Library/Preferences. Open the Preferences folder, locate that file and drag it to the trash, empty the trash and reboot. It's ok to trash a pref file as any Mac will create a new one for her.
Carolyn

Adobe Reader 9.x does not retain preferences when called by a 3rd party application.

I have an in-house application that utilizes .pdf and .xfdf files. We use Adobe 9.x when viewing these files and when I open them natively from Windows explorer they Display In Browser and all my Trust Manager preferences are intact. If I use the 3rd party application to open the files they Display In Browser but none of my TrustManager settings are present and I am forced to trust the document each time I reopen Adobe. If I leave Adobe Reader open for the duration of the session that I am using my 3rd party application though the Trust Settings for the document I loaded are present but as soon as I close Adobe they are gone until I Trust the document when opening it again. Any insight as to why this might be and how I could rectify the issue would be appreciated.

We are using 9.1.1.
We notice that this option is no loger available in this version. The below option will keep the form data available even if you exist out from the sessions.
Keep Forms Data Temporarily Available On Disk
Retains forms data in the Internet browser if you briefly go to
another web page and then click Back to return to the PDF form.

Any links i open from 3rd party applications do not open in firefox.

To be more precise, when i click a link, Firefox does open however it does not visit the URL. It simply opens a new session. I have started Firefox in safe mode and the problem occurs, i have reset firefox to default preferences and the problem still persists. I can see no problems in the setting of Firefox itself and have already tried all the fixes available.
I am using Firefox 29.0.1 on Fedora 20 64x

As i stated, when i click links from 3rd party applications, such as skype; a youtube link or something similar. Firefox opens a new session however it does not visit the clicked url

WRT54G and E.mail checking thru 3rd party applications

Similar Messages

Maybe you are looking for