WRT54G and iMac

I had no problems with the wireless router before, my Macbook Pro can connect successfully. I recently bought a new iMac and I've been trying to connect to the internet through a wireless connection. I keyed in the WEP key but for some reason, the Internet connection fails. I tried connecting to other wireless networks and got connected easily but I couldn't connect to mine. It says "Alert: No Internet Connection" on the display.
The set up couldn't diagnose the problem. I can go on the internet wired, but it won't just go wireless. I don't know why. Please help! Maybe it's the network settings? Please help. I've already tried restarting the modem and the router but it just won't go through.

If the Wireless Security is WEP, on your IPod Touch you need to enter a dollar sign($) and then WEP Key1 when you are prompted for the password...

Similar Messages

Both WRT54G and WRT300N stop responding

At one of buildings at our church, we have had a WRT54G acting as an access point. For awhile it would require a reboot about twice a month due to lack of connectivity. About two weeks ago, it would barely function. Our staff could connect to it but connectivity would go down several times a day. After reboot it would work for an hour tops. I pulled out the WRT54G and replace with a WRT300N. The staff experienced the same problem. There are about 8 staff members that connect to the router for LAN and internet access. What could possibly cause the dramatic drop in performance? Given no network changes. When folks connect with wired Ethernet at their desks, they do not experiences any problems. There has been an iMac and an MacBook Pro added to the wireless network. Is it possible at wireless interface is sending spurious/chatty packets? How could I monitor this? An MAC address filter is used for security. No WAP or WPE password security.

try putting the following wireless settings on the router
ssid - any non-linksys name
radio band - wide
n-channel - 9
standard channel - 11
also ensure that the router has the latest firmware on it ..

Bootcamp 3.1 and imac windows 7 64bit update not installing. Audio issues!

After many days of work getting the windows 7 working in bootcamp in my imac 27 (still with audio issues) I eagerly awaited the bootcamp update and imac updates.
Neither will install.
Then I find that according to tech support as of now I have to reinstall Windows 7 again for the updates to work!
It took me 5 full 8 hours days to get all my scientific programs installed and working, now I find I can't even simply update the drivers I need. I don't want to reinstall.
My only issues are audio.
Here they are:
1) The headset jack works fine on the Mac side, but in Windows 7, it causes the i7 intel CPU to go crazy. There is no CPU spike on the mac side.
2) The headset jack in the imac is a trrs jack. The same as in the iphone, a tri-band jack that has three bands, two audio out channels and one mic in channel. A trrs headset works fine on the mac side with using the headset mic (as in iphone) rather than the built in mic. (this provides much better quality for sound recording). I don't want to use a usb mike.
In Windows 7 the mic part of the trrs headset does not work.
3) In Windows 7 when going into audio devices recording, no audio mixer shows up, so when I do video or audio screen capture the only way to capture the sound is through the speakers and then back through the imac built in mic, rather than directly through the unit. (terrible sound quality) On the mac side the mixer element works fine.
Now I find from other imac users that even the new updates for the imac on windows 7 don't address and fix the audio issues. I am sure not going to go through 5 more days work only to find the audio issues still don't work.
I need these audio aspects to work properly though!
I have tried to get drivers for the cirrus logic audio card, but guess what there are none available and cirrus logic doesn't even recognize the board or offer drivers.
I have many windows programs I must have for my scientific research!I bought the top of the line Imac with all the bells and whistles because Apple promised that the machine could run Windows 7 in bootcamp natively!
It doesn't. This has been a nightmare of problems.
Is Apple going to step up to the plate and make good on their promises?
Does any one have a fix for any of the audio issues, or know how to install the new drivers without a complete reinstall of Windows?
Installing a few sound drivers and software should not require a complete reinstall. Getting the proper drivers for the headset jack audio in and audio out jack should be the most basic of fixes. Making the audio mixer work should be elementary.
If you are an Apple tech person or an Apple user that can help on these issues, please do!
Thanks, Dr. Duke
An American profesor in Europe.
PS I will post this under Imac windows 7 updates without a reinstall and under
imac Sound issues.

On another thread a few people have responded saying that their imac has the same situation, the cpu is going crazy and the imac gets hot with headphones or speakers plugged in. But this doesn't happen in the mac side.
If you have an late 2009 imac and don't have these audio issues, let us hear from you. If you don't, lay out the problem here.
Here is my last two cents in to the inquiry.
Not only does the cpu run crazy but the imac 27 gets very, very hot. Since I unplugged the headphones, it runs much, much cooler.
Certainly, some Mac engineers should take care of this problem, it seems it is universal on all the imac 27's and from what I gather, the smaller screened cousins too.
Also, we certainly want a stereo mix option for audio in or out, or what is called "what you hear" or wave out. Imac is supposed to be much geared to multimedia apps.
Finally, the mic jack part of the trrs set up MUST be fixed! A lot of manufacturers are going to headset combo jacks as they call them, mic in and stereo out on the same tribanded plug. But, the old single jack for mic in and single jack for stereo out are two tiny parts of the hardware and super inexpensive for the manufacturer. Why in the **** to go to the "advanced" triplug if the **** thing doesn't work.
Mac has a great reputation. I hope they remedy these problems right away.
Anyone whose imac 27 or 24 whose headset plug is working correctly. Let us know! I don't think anyone's is, but I think that few people understand that their cpu is running so much faster with the plug in, plus few even understand the combo jack and the triband, or trrs audio jack! Out of 4 audio technicians I talked to, not one of them knew what a trrs jack was or that you even have a mic in jack as part of the headset jack!
When I told one senior that it worked on the Mac side, he didn't believe for a while, thought my sound might be recorded from the onboard mic, but I proved it to him by tapping iaudibly on my iphone mic headset and and it showing up in garage band clearly and listening to big difference in audio.
As for a usb audio adapter, I am in a neon light environment and find that those adapters are more sensitive to electrical interference. Besides I want to use the headset jack as it was meant to be used!
Thats it.
Again, if anyone using an imac 27 and windows 7 64 or 32 doesnt have these problems, let us know! We are all anxious for a fix!
Best to all!

Problem with WRT54G and DSL NAT router

I have a WRT54G connected to a Westell DSL NAT router. I would like to be able to allow incoming connections to my FreeBSD server.
The Westell router allows me to set IP Passthrough (they call it "Single Static IP"). This gives the WRT54G the outside IP address given to the DSL router. I can then set up the WRT54G for DDNS and port forwarding to forward specific ports I want to my server.
This works, for about 2-3 days. Then, I start to randomly lose outside connectivity. Web pages start coming up with missing elements, or taking a long time to load. This will eventually lead to total loss of outgoing communication.
Normally, I would blame this on the Westell NAT router, but as I'm losing connectivity to the internet, I'm also losing connectivity to the WRT54G. It will try to load configuration pages but will be slow with missing elements, etc.
All communications between computers on my inside network continue to function properly, it's just connectivity to the WRT54G and the internet that seem to start to fail.
Does anyone have any idea what is going on? I just upgraded the firmware on the WRT54G from 1.01.1 to 1.02.0, but I don't imagine this will help.
Thanks,
David Chamberlain

Try setting the MTU to manual and change the value to 1450
"Only those who risk going too far can possibly find out how far one can go..."

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

New mac mini and imac vs powermac G5 running FCP studio

I want to compare running the FCP suite on the new max minis and imacs that came out today vs what I am currently using:
Currently I am running FCP Studio on a Powermac G5 dual 2GHz with one gig of ram. I believe the frontside bus is 1GHz. I believe the stock video card isan ATI Radeon 9600 Pro (AGP 8X Pro) video card with 64 MB of DDR SDRAM.
With this being said, is it safe to assume that the new entry level mac mini would surpass my G5 in terms of performnce in both video (NVIDIA GeForce 9400M with128MB or 256MB of shared DDR3) memory processing (intel core2 duo 2GHz)?
If not would the two low end Imacs (using NVIDIA GeForce 9400M with 256MB of shared DDR3 memory) and processing power handle FCP studio better than my current powermac G5 setup listed above?
I am wondering because I spoke to a apple sales person who transfered me to a system engineer that said I'd have a slow time rendering video on FCP with the mac minis as well as the 2 low end imacs. This may be but Im wondering if it is still better than what I am using
I appreciate your opinions, but please only answer if you really know,
Thanks!

For FCP/FCS I would not save on anything but will get the max what my budget allow. You will be always doing more and the workflow in FCS will entice you to open almost all apps in FCS concurrently to make use of the advanced features. I think that the new iMac are powerful enough to handle FCS, but once again, the extra dollars will save you alot of pain. FCS is a pro app and is not to be underestimated. Good luck.

Can I use Mac Mini as a "server" for a MacBook Pro and iMac?

I want to develop a simple system for accessing my files from multiple devices.
I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule. We use wireless fibre optic broadband.
I don't really want multiple iTunes and iPhoto libraries. We want all our music and pictures in single master libraries that we can all access and update.
As there is seemingly too much data to store on iCloud, we need to find an alternative solution.
My possible solution is:
(1) Load my master iTunes, iPhoto and iMovie libraries ("iTPM libs") on a Mac mini
(2) Buy a new MacBook Pro or iMac (probably doesnt matter which)
(3) Link the MacBook Pro(s) and iMac to the Mac mini to access iTunes, iPhoto and iMovie and the master iTPM libs
(4) Plug the portable hard drives into the Mac mini whenever I need to access the video content stored on the portable hard drives
(5) Add "users" to the system (i.e. family members), in the same way you would access a shared server at work
(6) Over time, buy more computers to access the system in the same way
My questions are:
(1) Is this system feasible?
(2) If so, can I edit the iTPM libs from the MacBook Pro or iMac?
(3) If so, what happens if both the MacBook Pro and iMac are accessing the libraries at the same time? Which takes precedent?
(4) Would this solution be significantly slower than having separate libraries on the different computers?
(5) Is there an alternative approach that might work better for my needs? (which are, after all, relatively straight forward). When I went to the Apple store they were unsure!
Many thanks.

I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule.
[…] We want all our music and pictures in single master libraries that we can all access and update.
The "update" portion of this is where your problems will arise. You'd be better to consider your proposed system initially in terms of content "consumption", before getting into the nitty-gritty of editing shared content.
iTunes has the Home Sharing feature built-in, which solves the content consumption issue.
I don't know anything about sharing iPhoto libraries, but this KB article looks useful.
As for iMovie, I think there are two things you want to do: share the raw data (sound effects, music, photos etc.) that are used to create iMovie content; and share the finished results. Is that right? I'm not sure how you'd go about doing that, but if you clarify your aims in this regard, it'll help the next person who comes along.
When it comes to updating content, such as adding new music to iTunes or iPhoto, I'd suggest you do it through the Mac mini directly. This seems the least problematic solution. You wouldn't necessarily need a dedicated display for the Mac mini - you could use remote desktop or VNC or what-have-you.
As for speed: doing anything across a network is always going to be slower than doing it locally. But, it probably won't matter for content consumption (though if you're all watching different movies at the same time the drives on the server may struggle, and the wifi bandwidth might be tight).
I hope this represents a good initial response to your query.

WRT54GS and poor performance?

I've owned a WRT54GS for about 3 months, and I simply can't get any faster than 1/2 of the 54mbps standard, let alone even see the speedboost capability.
I have 3 laptops, two of which have the speedboost (afterburner) chips built in. But even the 3rd laptop *never* goes past %50 of 54mbps. I get to 24mbps, and there it sits.
Any ideas?
Message Edited by tfry on 02-18-2008 02:00 PM

It seems that you need to update your routers software. Anyway, if you are online hardwired to your router. Try going to www.linksys.com/connect. Download the software called Easylink Firmware Tool. Just run this software and hopefully this should assist you in upgrading your routers firmware.
If this would not work, or would fail to upgrade your router, you might need to do it manually instead. Go to www.linksys.com/downloads . Input your product model number w/c is WRT54GS and select your router version. You can find the actual version underneath the router itself on one of the stickers. Just like the image below.
Select the data labeled firmware and just save it to the main desktop page. Then open up a new web browser, type on the address bar now the numbers 192.168.1.1 (password as a default is usually admin, username just leave it blank). Then follow the instructions on the image below.
Click on browse, select the file you just downloaded, click on open and then hit the upgrade button.
NOTE: Make sure you do all of these on a hardwired PC.

How can I do to have the same contacts in all my devices, pc, iPad and iMac?

I have severl devices and the last taime I updated my contacts was almos manually. I would Like to be able to have the same contacts in all, pc, iPad, and iMac.
How can I set it so to get it done through iCloud?
For instance in my pc ( windows 7 Home Premium ) I use Outlook 2007.
Thanks for any comment on this.

switching on iCloud should automatically tell it to merge data with that device and icloud. i'm on a mac but its gotta be the same on all devices and systems.
when you switch on icloud for Contacts on a PC, it will tell you its merging all contacts with icloud...

How do I set up Apple Mail with Yahoo (IMAP) so I can delete mail on my iphone but leave it on the server and iMac.

I am trying to maintain my inbox on my imac while not carrying around all my mail on my iphone. As of now, I only seem to be able to sync the inboxes. If I delete a mail on my iphone, it disappears on both the server and imac. I only seem to be able to make it move the mail to the deleted mail box and keep it there.

That's the way IMAP servers work. The messages really live on the server; the iPhone and the iMac just view them.

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8)

How does one continue to use Mail on the early MacBook Pro, Model 1,1, that is not upgradable to Lion? I have been running iCloud on my iPhone (OS5) and iMac (Lion) along with the MacBook Pro (OS Version 10.6.8) since November until now. Mail will no longer download on the MacBook Pro and keeps asking for my password.

Mail should still be usable with your machine - but you'll need to update the settings to conform to the requirements of your system. Check with your ISP (like ATT, etc.) for the settings that will work with your Mail. Once you've updated this, you should be able to email like before.
For example, my ISP required that I go to Mail Preferences/Accounts and make sure the details conform to your email settings.
I have no idea of what your ISP is or what the settings might be, but this is likely the source of the problem.

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this

Lion 10.7.2 On both mac book pro and iMac, both with Lion 10.7.2, obtain repeated iCal event notifications from calendar or address book. Cannot turn these off. They repeat several times per session and every time computer is used. How to diagnose this?

First, uninstall "SuperTV" (whatever that is) according to the developer's instructions. It isn't working and it's filling the log with noise.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged before the boot, while the system was unresponsive or was failing to shut down. Please include the BOOT_TIME message at the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message. When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
PLEASE DO NOT INDISCRIMINATELY DUMP THOUSANDS OF LINES FROM THE LOG INTO A MESSAGE. If you do that, I will not respond.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

HT201342 I have set up my iCloud email address on my iPhone and iMac but it does not appear on my iPad. Dies anyone else have the same problem?

I have set up my iCloud email address on my iPhone and iMac but it does not appear in my iPad? Any suggestions?

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team..

HT1206 My credit card security code keeps popping up as invalid but I'm able o purchase off my home computer and iPod, iPhone and iMac. Why can't I use the same card off my iPad ?

My credit card security pin shows up as invalid on my iPad. However, I can use the same credit card information off my iPod, iPhone and iMac. What is causing this to happen?

have you enter the security code when you rentered your cc information.

How to delete my email on my iPad and have it automatically delete the same email on my iPhone and iMac?

How to delete an email on an apple device and have that deleted email automatically delete from my iPhone and iMac?

You need an IMAP type email account a opposed to POP 3. Google the two words together to find out more.

WRT54G and iMac

Similar Messages

Maybe you are looking for