WRT54G and WRT54GS Linksys EasyLink Advisor (LELA) users

If you are experiencing any issues with Linksys EasyLink Advisor (LELA) and the latest firmware on the Linksys.com, you may have to roll back your firmware version. Linksys EasyLink Advisor (LELA) may not function properly with the firmware revisions listed below.
WRT54G
Version 5 - firmware version 1.02.4
Version 6 - firmware version 1.02.4
Version 8 - firmware version 8.00.4
WRT54GS
Version 5 - firmware version 1.52.4
Version 6 - firmware version 1.52.4
Version 7 - firmware version 7.50.4
If you are experiencing issues with LELA and have installed one of the listed firmware files, you will need to roll back your firmware to the previous version. The correct files are listed below and are available for download as an attachement.
WRT54G
Version 5 - firmware version 1.02.2
Version 6 - firmware version 1.02.2
Version 8 - firmware version 8.00.2
WRT54GS
Version 5 - firmware version 1.52.2
Version 6 - firmware version 1.52.2
Version 7 - firmware version 7.50.2
Regards,
Linksys
Message Edited by david on 12-27-2007 05:34 PM
Attachments:
WRT54Gv5v6_v1.02.2_fw.bin ‏1644 KB
WRT54Gv8_v8_00_2_fw.bin ‏1644 KB
WRT54GSv5v6_v1.52.2_fw.bin ‏1644 KB
WRT54GSv7_v7_50_2_fw.bin ‏1644 KB

8.00.4 was available for a short time. I know it caused me a handfull of problems and there was a posted issue with that firmware and LELA.
8.00.4 was removed & replaced with 8.00.2.

Similar Messages

Linksys Easylink Advisor - Main has encountered a problem and needs to close.

I installed LELA 3.0. When Windows XP starts or when I try to start LELA from the desktop icon, I receive the following error "Linksys Easylink Advisor - Main has encountered a problem and needs to close. We are sorry for the inconvenience." In other words, I can't get LELA to run on this PC. It does run on the other networked PC.

I don't think this is a Firefox problem. I have the same error message and I get it regardless of whether I'm using Firefox or another browser.
In checking [http://www.whatsrunning.net/QueryProductID.aspx?Product=16854] it is a file owned by Microsoft. I suggest you check your registry for errors.

Cannot uninstall Linksys easylink advisor

In trying to remove Linksys easylink advisor via add & remove programs, i get the message,
missing setup.msi. I installed the disk that came with the router, (wrt160n) and still no luck.
What can I do to add setup.msi to the software?
I am uninstalling Linksys easylink advisor because I just added Network Magic.
I am using Windows XP S3.

Yes, I had the exact same problem. I have the WRT54G router version 6 firmware. Here is a link to the new LELA. BTW it is now blue instead of green. http://update.linksys.com/lela/install/lela.exe I hope this fixes your problem.

Start Linksys EasyLink Advisor at startup in tray

Hi
I can configured Linksys EasyLink Advisor to start at startup in the tray ?

On the Welcome screen, uncheck the check box that says "Show welcome screen at startup". Then, click Close to finish.
Follow this link and see if you get more information about LELA.

Linksys EasyLink Advisor: Worth it?

I reciently installed a Limksys WRT 110 router and am generally pleased with it. However, it installed Linksys EasyLink Advisor (v 3.0 build 8122.29) which I find buggy.
Two examples:
I regularly get a "Excaption has been thrown by the target of an invocation" error message (Did Linksys stay up nights to come up with the most un-understandable error message they could find?)
I canot connect to http://192.168.1.1/
Ya, I know - reset the router. I've done that 3-4 times.
Can someone one give me any reason which the LEA is any better than the one Windows XP provides? I mean besides the pretty GUI....

It's all automatic cybergranddad! That's why it's better than doing it manually!
You can get an updated version here.
"Nankurunaisa" "It will all work out just fine!"

Connect WRT54G and WRT54GS

Hello, Hoping for some help with the following. So, in my living room, i have my comcast dual phone/cable modem, my linksys wrt54gs, and range of wireless devices (PC, PS3, Wii) We just bought an XBOX 360 today for my son's room, and i am trying to figure out how to connect the 360 online, without having to buy the Xbox or Linksys wireless adapters and without moving the modem into his room. Is it possible to connect my WRT54G wirelessly to my WRT54GS and then use ethernet from the wrt54g to the 360? Expert advice needed. Thanks in advance. Gavin

You cannot do what you described, at least not with Linksys firmware. Linksys routers are designed to generate a wireless network, not to connect to an existing wireless network.
The function that you described is called a "wireless ethernet bridge".
One option would be to check around for third party firmware, to see if you can find firmware to convert your WRT54G to a wireless ethernet bridge. You might want to check "dd-wrt" or others. Note that loading third party firmware into your router will void your Linksys warranty.
The other option is to but an Xbox wireless adapter, or get a Linksys wireless ethernet bridge, such as the WET200, or WET54G.
Of course, the ideal solution for gaming is to run an ethernet cable from the WRT54GS to your Xbox. I am sure your son would love it!

Linksys Easylink Advisor Download Link

Every so often a link opens up asking me to download Easylink Advisor. I already have the connection up and don't want this link appearing. Help!!!

Go to add/remove programs and remove LELA. It is not needed for anything with your router.

Linksys easylink advisor

Hi all-I have installed linksys wireless router model # wrt160n. It appears that the software has installed ok, but the advisor portion gives an error msg when opening it up from the desk top. Any clues as to what the problem is? I am running windows XP. Thx

You could try to reinstall the software again. Not sure what version of the software you are running, the link below will allow you to download the latest version which is (ver 3).
http://update.linksys.com/lela/install/lela.exe.
Good Luck,
Ttech

Can you install the update for Linksys EasyLink Advisor over the current version?

I was notified of a new update for Lela, Lela-3-11.9139.94. I saved the download to a file.
My question is as follows: Before installing the new version, do I need to uninstall the current version 3.0?
I just got the router running properly and do not want to mess anything up.
Solved!
Go to Solution.

I had v 2.0 working fine... I downloade the v3.0 "lela-3.11.9139.94.exe" and when the install is at the "installing JRE it hangs.. and never ends. I am using XP professional with latest fixes.. I tried to clear the reistry, Tried install 5 times, Allway tops at JRE.. Also installed latest SUN JRE.. I have no idea what i wrong.. Must be a bug in the install..
Any suggestion?
Reginaldo
Message Edited by rbarosa on 06-29-2009 06:28 PM
Message Edited by rbarosa on 06-29-2009 06:28 PM

Visit the New Linksys EasyLink Advisor

This router looses connections at LEAST once a day!! I upgraded the firmware (no better performance and disconnects still the same).
any suggestions?
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-03-2008 06:34 AM
Message Edited by giantherockstar on 01-04-2008 06:49 AM

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it. If you have not done this since the last firmware upgrade, please do this now.
If you need more help, you will need to tell us more details of your problems.
Please state the model and version of your router.
Please state the make and exact model number of your modem.
Please state your ISP.
Also, describe exactly what is happening on your network when your system disconnects. Are all computers disconnected from the Intenet? Or only the wireless computers? What is running on the computers when your system crashes? a game? P2P software? other?
Also, please connect your computer directly to your modem. Verify that you can get a working Internet connection, then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post your results.
Message Edited by toomanydonuts on 01-03-2008 11:48 PM
Message Edited by giantherockstar on 01-04-2008 06:51 AM

Visit the new EasyLink Advisor Forum

Visit the New Linksys EasyLink Advisor Community Forum to post comments, questions, and feedback specific to the new EasyLink Advisor software.
Linksys EasyLink Advisor (LELA) is a free application that provides an easy way to setup, view, manage, and repair your network. Most Linksys Wired and Wireless Home Routers are already supported in LELA including:
BEFSR41       BEFSR81       BEFW11S4
WRK54G        WRT300N       WRT54G
WRT54GC     WRT54GL       WRT54GS
WRT54GX     WRT54GX2     WRT54GX4
- If you already have a supported Linksys Router you can install LELA to run on your existing network. LELA will not change anything on your network, and you will be able to see a graphical view of all your networked devices.
- If you are setting up a new router, select the model from the list in the welcome screen and you will be guided through the steps required to quickly get your network up and running.
You can download LELA (for free) from http://www.linksys.com/lela
We hope you will enjoy using LELA , we welcome your comments, and we'll do our best to answer your questions on this forum.
The EasyLink Advisor Team

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it. If you have not done this since the last firmware upgrade, please do this now.
If you need more help, you will need to tell us more details of your problems.
Please state the model and version of your router.
Please state the make and exact model number of your modem.
Please state your ISP.
Also, describe exactly what is happening on your network when your system disconnects. Are all computers disconnected from the Intenet? Or only the wireless computers? What is running on the computers when your system crashes? a game? P2P software? other?
Also, please connect your computer directly to your modem. Verify that you can get a working Internet connection, then do the following:
Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig /all" (with no quotes), then hit the Enter key. Post your results.
Message Edited by toomanydonuts on 01-03-2008 11:48 PM
Message Edited by giantherockstar on 01-04-2008 06:51 AM

Easylink advisor link or software needed please help me

i need the software for the linksys easylink advisor for the router wrt54gs version 6. i have 2 computers at my house and the one that had all my router information officially broke ( i saw it coming it was 10 years old and i did not take care of it well) i disconnect my ps3 from my house and took it elsewhere and now that im back i cant reconnect it to my router its frustrating and lapotops cant be used either because i dont know my WEP code please if anyone would liket o giv me a link to the software for the easylink advisor for my router and version that would be tremendous and i would greatly appreciate it.

http://update.linksys.com/lela/install/lela.exe
From Chris
Linksys Wireless-G WAG54GS ADSL Gateway
Newlink Wireless 11g 54Mbps PCI card worked with Windows 7 64-bit

Easylink advisor

I bought my router couple weeks ago, and tried to use the Linksys Easylink advisor program. It always give me an error message that "unable to connect to the remote server".
What can I do?

Jun Gao wrote:
I bought my router couple weeks ago, and tried to use the Linksys Easylink advisor program. It always give me an error message that "unable to connect to the remote server".
What can I do?
Dont use the software anymore
manually set up your router ..
Who is your ISP ?
I believe that I can make it

Easylink Advisor Says cant install

says cant install, needed processor is X86 Have a brand new HP Pavillion Extreme Running a WRT600N Router but cant seem to get the Locks off of the wireless part

If you are facing problems with Linksys EasyLink Advisor Update LELA here

EasyLink Advisor for WRT54GS

I am using the Linksys WRT54GS EasyLink Advisor software that came with my router. My computer is running XP windows. But I can not get the Adsvisor software to work, it is loaded into my system but when go to the program all my options are grey, I can not see any of my devices connected nor can I add any. The EasyLink Advisor is a verision :7.0.03 can any one help me?

LELA is not supported under Windows 7.

WRT54G and WRT54GS Linksys EasyLink Advisor (LELA) users

Similar Messages

Maybe you are looking for