Wrt54g - any way to block selected wireless users for a limited time ?

i work with info on the internet. i share my internet connection with my sister (lives in the same building), but sometimes i try to access some page in the middle of the night and she is downloading videos or music and i get a veeeery slow connection. Is there any way to drop her wireless connection for a limited time without having to change the routers password ?
thanks

hi..
i think yOu can block other wireless computers by permitting selected wireless computers only to connect to yOur network...
its the MAC filter feature(allow all) on yOur router then enter the MAC address of the wireless computers that yOu want to connect to yOur network....

Similar Messages

Is there any way to block accessing Exchange server

Hello,
We are using iPhone as a business phone to
access Exchange server using ActiveSync.
Is there any way to block non-company, in
other words private iPhone, iPhone to access
Exchange Server?
Some users have 2 iPhones (1 provided by our
company, 1 purchased by himself/herself as
a his/her private phone).
We would like to block those non-company iPhone.
If there is a way(s), please let me know!!
Thank you very much in advance.
Regards,
Tak

Block/Delete will appear if "Enforce Password on Device" is NOT ticked in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
Wipe/Delete will appear if "Enforce Password on Device" IS TICKED in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
The only difference is, if you first have "Enforce..." ticked and you join phones A,B,C, - they will always have WIPE next to that phone even if X months down the line, you untick "Enfore...".
If at that point (after unticking "Enforce..") you join phones D,E,F, they will have BLOCK next to their phone and always will have until you tick the "Enforce..." again and the user will be prompted to input a code when they next sync.
Again I repeat, the 'Lock code' when inputted into the phone acts as an agreement between the user & exchange that exchange has permission to wipe the phone remotely. Without that agreement ("Enforce..."), you should not have the WIPE function on those particular phones.
Hope that makes sense.

Is there any way to block PR changes when PO exists in project builder

Dear All,
Could you please advice...is there any way to block PR changes (quantity,price, etc) when PO exists in project builder ?
Many thanks in advance.
Nies

Hi Nies,
If you are not using the material then you can go for Validation, under Operative Structure> Network> Validation.
Attach the validation with OPSA click on Automatic.
In the second scenario if you are using Material Component, as Mr.Muralidharan said OPSG there you can restrict the change by selecting Error Message.
1. Tcode OPSG in Setting see all the object are selected.
2. Click on Component tab under change in Purchase Order Exist tab select Error.
Regards'
Syed

Is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

is there any way to block the shutdown of the device is protected by password? This function would help in case of theft with the issue of the find my iphone app.

Device experiences issues, locks up.
I need to do a reset.
How would I do that with a pass code lock in place?
Wait until the battery dies?
Apple's changes in iOS 7 are smarter.
"Losing your iOS device feels lousy. Thankfully, Find My iPhone can help you get it back. But if it looks like that’s not going to happen, new security features in iOS 7 make it harder for anyone who’s not you to use or sell your device. Now turning off Find My iPhone or erasing your device requires your Apple ID and password. Find My iPhone can also continue to display a custom message, even after your device is erased. And your Apple ID and password are required before anyone can reactivate it. Which means your device is still your device. No matter where it is."
http://www.apple.com/ios/whats-new/

HT1848 how about if I do not want to transfer some purchase to my laptop when I do the sync, like games for my kids which I only want to keep them on my I phone!! . Is there any way I can select what to be transfer to my computer or not?

how about if I do not want to transfer some purchase I did from my Iphone to my laptop when I sync.... like games for my kids which I only want to keep them on my I phone!! .
Is there any way I can select what to be transfer to my computer or no at the sync time or maybe set up my phone by selecting specifics items to be transfer !
I got also some kids apps that I do not need it on my laptop!

can anyone explain to me please???

Is there any way to block someone on Yahoo! IM?

I keep getting spam from people on Yahoo! Instant Messenger. The only solutions I can find on Google involve downloading the official Y!IM client and using that to block the person (add to the ignore list).
Is there any way to block someone within the messages app?

Hi,
You can in the Yahoo for Mac app (This has been in Beta for literally years)
It seems that the iChat and Messages Beta Yahoo part is a sort of Bolt-On (it is actually a Plug-in) that does Text Chatting only and not much else (it can go Invisible)
It seems it lacks some other functions that the Yahoo for Mac App has such as blocking people.
10:13 PM Wednesday; May 30, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.7.4),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Is there any way to block calls on a Pantech?

Is there any way to block calls on a Pantech?

Hi Miniv,
Unwanted calls can be annoying! What make/model Pantech device do you have? We offer a Free Call & Message blocking feature to help prevent unwanted calls http://spr.ly/6586f3Qw* .
Thanks,
PamelaF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

Is there any way to block PDF files sharing from iPad to any another device or cloud? We need to have certain PDFs visible and readable only from iPad.

There are "container" apps emerging for the iPad. Enough searching & I suspect there would be one for your needs.
All in one Application that emphasize security
Good Collaboration Suite Secure mobile app-to-app collaboration.
The Good Collaboration Suite includes Good for Enterprise, Good Share and Good Connect secure mobile apps, simplifying access to email, calendar, contacts, tasks, instant messaging, browsing and document sharing. These apps are built using Good’s next-gen containerization that includes secure data sharing between any Good secured app as well as app-level encryption independent of the device used."
http://www1.good.com/applications/

Is there any way to block unwanted messages on an ipod touch

my son is getting unwanted messages on his ipod touch. is there any way to block messages coming in from unknown people?

There is presently no way to block Messages from specificat senders.

Is there any way to block **** sites from my iPad ?

Is there any way to block **** sites from my iPad?

there are parental control apps you can look into. Such as McGruff. You block safari in restrictions then use the mcgruff app. Or you can look into your router and see what settings you can change there.
Also, depending on your service provider, some give you free access to content control.

Any way to create a keyboard shortcut for keywords in Bridge CC?

Just curious if there's any way to create a keyboard shortcut for "new keyword" and "new sub keyword" in Bridge CC?
If not, that would be a welcome addition in any future Bridge update - being able to customize keyboard shortcuts or add your own the way you can in Premiere Pro CC.

Steve,
Not, as far as I know, directly, but the problem is with Aperture, not Keyboard Maestro. Aperture has no command (afaik) for selecting the caption field of the Info Inspector. Without a command, you will have to find another way to access it, or another way to accomplish what you want.
You can specify the spot clicked by screen coordinates, so you cold use the Inspector HUD and the coordinates of the Caption field, as long as the Inspector HUD always pops up in the same location.
Many dialog boxes allow the user to advance through the fields with the Tab key. Unfortunately, the number of times you have to type "{Tab}" in order to get to a particular field depends on other interface elements (if the Control Bar is showing, add 2). I don't know of a way to determine if the Control Bar is showing.
You might find a work-around using a Metadata Preset and the Batch Change command. Keyboard Maestro can easily pop up a dialog with a text field in which you can type what you want to go into Aperture's Caption field.
The best thing to do is download the trial version and see if it meets your needs. Keyboard Maestro is adept at creating macros based on keyboard input. If the program does not provide keyboard equivalents, writing an effective macro becomes difficult.
http://www.keyboardmaestro.com/main/
The author provides exemplary documentation:
http://wiki.keyboardmaestro.com/About_Keyboard_Maestro
Lastly, for the use you cite, I simply show the Inspector if it's not showing (by typing "i"), change to the Info tab if it is not currently activated (by clicking, but note that opening the Inspector with the Info tab selected can be done with one command "View➞Inspector➞Info"), and then clicking in the Caption field, which is part of all of the Metadata Views I regularly use.
HTH. Perhaps one of our programming mavens will suggest something better.
--Kirby.

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

Is there any way to create admin role only for one resource.

Hi all,
I am trying to create an admin role with 'update user' capability. But I want to restrict the user(with the admin role) to be able to update a user's attribute only for one resource, The user(with the admin role) should not be able to update the attributes of the other resources which a user have.
Is there any way to create admin role only for one resource?
I customized the tabbed user form to show only one resource attribute (deleting the missing fields and adding my tab for the resource) and then assigned this new User Form to the user(with the admin role) in security tab.
It works fine. But the problem is that if any user(with the admin role) is also admin of some other resource then he/she will not be able to view the other resource attributes.
Please suggest,
thanks

The loop function always repeats the same region so of course the fade is also copied. So option+drag the original region to make a (non clone) copy, fade the first region and loop the second one (which you just copied).

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

Welcome to the Apple Community.
Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

Is there any way we can set default value for a Date Attribute to current date in Master Data Services

Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
Thanks.

Hi Anagha,
So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
1. Add buisness rule which can set a default value when Date = NULL/Blank
2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
3.Go to that table and add a after update trigger like
if uda_<entityid>_<attributeid(Date attribute)> = default value
update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
I will check on this too from my side.
By the way AFAIK i dont think so calendar control integration is possible .

Wrt54g - any way to block selected wireless users for a limited time ?

Similar Messages

Maybe you are looking for