WRT54G Applications and Gaming entries won't SAVE

Whenever I go into the "Applications and Gaming" section of my WRT54G router settings and try and input anything in it doesn't save. It says SAVE SUCCESFUL BUT IT ISN'T!
It used to save back when I first got the router but after I reinstalled windows it stopped working.
Any help would be nice.
And for some reason I can't upgrade the firmware I don't know if that has anything to do with the problem in the first place. But I have Firmware Version: v1.00.4. I don't know it that's the latest or what.

Sounds like you might have corrupted firmware.  Reset your router back to factory default settings then try the TFTP.EXE program and upload the firmware to the router.
Message Edited by wehowardjr on 02-13-200703:42 PM

Similar Messages

  • Changes to applications and gaming have no effect on WRT54Gv2.2 and restarting breaks routing

    If I power off my router and power it back on, nothing on my network can get out and none of the port forwarding works. 
    If I log into the router and use diagnostics to ping stuff outside my network it works just fine, but nothing on my network works any longer. 
    Also, even when it is working, making changes to the applications and gaming page has no effect.  Old entries on that page still forward to where they did before I made the changes, even though the router will show them going to the new place I told it to go to.  This is extremely frustrating because I eventually try restarting my router which gives the problem I mentioned above that I can no longer use the internet at all from any machine on my network even though my router is connected properly to the internet.
    The way I fix this is by loading an old configuration file and then loading back one with my current settings.  This also doesn't always work and it takes a lot of trial and error to get it back to normal.  This has been happening ever since I last upgraded the firmware, which I had to upgrade because automatically updating DynDNS was no longer working.  I can't find the old firmware anywhere on linksys' site so that I could test if it's a bug in the firmware.  This is my last resort before I buy a new router as it's driving me insane.

    Thank you ricewind, I installed a slightly earlier verson of the firmware and it appears to be working properly for the moment.  If the problem doesn't come back I'll report back that it's probably a bug in the version of the firmware I was using (which was WRT54GV4.0_4.21.1_US_code.bin)
    Thanks again

  • My clip timing and transition points won't save at desired positions, anyone else having this issue, it crashes as well.

    My clip timing and transition points won't save at desired positions, anyone else having this issue, it crashes as well.

    Could you share the crash log here? Thanks!

  • Problems with syncing Ipad with ITunes: apps won't appear on Ipad and organizing icons won't save

    I have a new Ipad 4 for three weeks. Yesterday I start having some problems with syncing my Ipad with ITunes (earlier all was without troubles):
    - downloaded in ITunes on PC apps won't transfer to my Ipad - I press Apply and sync, it goes successfully, but apps won't appear on Ipad.
    - I tried organizing icons on Ipad from PC, press Apply and sync, it all goes succesfully, but on Ipad icons won't rearrange. But ITunes shows that they are rearranged...
    - also I tried syncing my books adding one new book, press sync all books, and new book won't appear. Only when I've chosen every book separately, they transfered.
    I use USB for this.
    I tried resetting my Ipad, reinstalling ITunes on PC, deauthorizing and authorizing my computer, but it didn't help.
    Apple ID are the same on PC and Ipad.
    I hope that I'm not the only one with this problem. And also forgive my mistakes if there are any - English is not my native language. Thank you!

    I know that it is time consuming and a bit of a pain in the butt to have to do it, but I would backup the iPad, restore to factory settings and then restore from the backup, and sync everything back to the device. It's going to take a while because you have a ton of music on the iPad, but IMO, that would be your best option now.
    You could try unsyncing all of the music, and then resync it all again, but that takes time as well. If you are going to spend that much time trying to fix it, you may as well restore the device ...IMO once again.
    Use iTunes to restore your iOS device to factory settings

  • [Solved] Removing "Recently Used" and "Search" Entries from Open/Save

    Each time I save or open a document, the dialog box defaults to "Recently Used". What I'm wanting to find out is how to get rid of the entry from the "Places" bar altogether. I understand that the entry was put there with good intentions, but it seems to always amount to an extra step. The best example is when I use "Save As". I will type the name of the file and since the dialog has automatically put me under "Recently Used", I have to then navigate to where I want to save or the "Please select a folder below" error will appear. Had the dialog defaulted to the home folder, this stumbling block could be eliminated.
    I realize there is probably some fundamental knowledge I'm not aware of and don't know exactly what to search for. I'm using Openbox and have the core XFCE applications installed, but I don't know if this is a GTK issue, xdg, or what. All of my searches point to getting rid of ~/.local/share/recently-used.xbel, but I'm not concerned with that and already have a transparent panel launcher that handles it.
    I have found a post in this forum that addresses the same issue, but it has gone unresolved also:
    https://bbs.archlinux.org/viewtopic.php?id=129555
    This user mentions a directory hack that is resolving the issue for now, barring any other solution, I'd like to know exactly what that is, as I can't seem to find the answer to that either.
    Thanks in advance for any help.
    Last edited by freud_zoid (2011-12-14 19:33:07)

    perseus wrote:In the recent update to gtk2-2.24.14-1 the code in gtkfilechooserdefault.c has changed and the patch no longer works. Gusar, is it possible to provide a new patch please? I absolutely hate the default behaviour.
    I haven't made many patches for things and you'll need to type in the file name when you apply it, but this will work for the current gtk2 package:
    --- gtkfilechooserdefault.c.orig 2012-12-06 20:24:05.758831989 -0500
    +++ gtkfilechooserdefault.c 2012-12-06 20:28:07.352183658 -0500
    @@ -6061,7 +6061,7 @@
    switch (impl->startup_mode)
    case STARTUP_MODE_RECENT:
    - recent_shortcut_handler (impl);
    + home_folder_handler (impl);
    break;
    case STARTUP_MODE_CWD:
    Or if you'd rather, you can just edit gtkfilechooserdefault.c directly and replace 'recent_shortcut_handler' on line 6064 with 'home_folder_handler' and rebuild.
    The patch above probably reveals my lack of expertise, but thanks goes again to Gusar for showing the way.

  • Lightroom 5 won't export pictures and photoshop CC won't save or merge layers.

    My lightroom is having trouble exporting pictures, an error occurs very often and it is making it very difficult to export and my photoshop CC will not save pictures and has had minor errors occur often.

    http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html

  • I was working on an application and I was trying to save the info but I have the form and not the info did i lose the info?

    I could not find the completed application that i saved only the empty form

    Hi Sailor,
    It is pretty amazing you got a new version without even knowing it.
    In System Preferences > App Store you can turn off the automatic updates by unchecking "Install app updates" as I've done here:
    If you're using Numbers across platforms and displaying dynamic output on the iPad or doing data entry there, you'll be *much* happier with Numbers 3.0 than the old version. If you're doing a lot of traditional printing of heavily formatted documents, the old version is much better.  For most day-to-day uses in between it's a toss-up.  The new version, despite its flaws, is a powerful application that can enhance productivity in ways the old version can't.
    For more on the differences between the two, see the features gained, features lost, and workarounds threads, plus Apple's support document on features to be reintroduced in the coming months .
    SG

  • I got e-mail to download Firefox 4 and I deleted old Firefox from Applications and my computer won't work with Firefox 4 - how do I get back to my older Firefox 4 - please help

    I need to get back to my older version of Firefox - my computer won't accept Firefox 4 - how can I find my older version I had that I told to replace with Firefox 4.

    I also want to restore the old version. I downloaded 4.0 this morning, and am entirely unable to use it. All I can do is stare at that beachball.
    The concept was nice, but the implementation leaves much to be desired.
    I've attached a screenshot of "Not Responding" Firefox, eating up 93.9% of my CPU. Consistently.
    How do I retrieve Firefox 3?

  • HT1677 What happens when you press "save" and the device won't save your settings?

    Today, I upgraded my ipod touch 4 gen to IOS 6.
    I just tried to save my settings under Safari, and I get an error message, "https://www.google.com Sorry, we failed to save your settings. Try again later."
    I tried most of the evening, and still the same error message...
    I've tried to "Google" the error message, there is NO match, lots of other stuff, but no match to my error message.
    Topbarhive

    Mor info on this issue, I can't disable the "Search History" (ie: check "Do not save searches") IF I try I get the error message...
    I seem to be able to disable the rest of the stuff, without the Search History checked "do not save searches" and save without the error.
    If I try to check only "do not save searches" it will give me the error.
    There must be something in IOS6 that I checked in someother place on my device that is causing my issue.
    BTW there is no option to "remove all website data" on my device, it just show a "grayed out" "0 bytes" beside the "term" Website Data.
    Thanks for helping me.

  • Calender entries won't save

    Every time I enter a new appointment on any of my iOS devices it disappears soon after. If I close the Calender and re-launch, the entry I just made is gone or if I don't close the Calender and try to make another appointment (same day, different day....all gave the same result) my previously saved appointment disappears. Sometimes it even edits my new appointment to reflect the date of the previously entered appointment then it all disappears. Anyone know off some bug or something that's affecting Calender at the moment?

    Thanks for the reply again but I figured it out at lunch today.  When my gmail account was setup when I purchased the Droid at Verizon, they check the box to sync my google calendar and I don't use it.  When I went back and unchecked the box and then made an entry in the calendar on my DroidX it saved and stayed.  So, the problem was with the setup not the app itself.

  • Application And Gaming / Port Forwarding || HELP NEEDED || Can Only Access Via LAN

    Hi.
    I have just bought a Wireless Router, Model Number: WGKPC354G-UK. With the intention of setting up a small server. This server will run from my PC (directly wired into router), running a game called "Counter Strike" - I had to download a dedicated-server tool for this and i successfuly installed this and followed the tutorial to set it all up..
    So I thought i had done it, but I could only access my server with my internal IP 192.168.1.64 (LAN).
    I then found out that i needed to "Port-Forward" I followed a tutorial on www.portforward.com - This showed me how to open the ports, and which ones to open.
    I did all this and i still encounter the same problem !
    So i then opened all my router ports "DNZ" and it still doesnt work !!!
    Any help will be greatly aprreciated !
    PS. Below Are The Required Ports.
    http://portforward.com/english/routers/port_forwarding/Linksys/WAG354G/Counter_Strike.htm         

    Keep in mind your ISP could be blocking the ports needed. DMZ almost ALWAYS works and if it doesnt, most likely your ISP blocks the ports.
    another test is to make sure you can connect to the game server from another CS machine on the inside of your network. If this works, that means your server is up and running properly and its probably your ISP blocking certain ports needed for the CS Server.
    You should also check you have the Windows firewall disabled, and any other software firewall on your server disabled.

  • Notification and Network Preferences won't save in Yosemite

    When I change my notification centre to ‘Sort Manually’, sort it manually, and change the banners to my liking, the settings hold until I reboot. The same is true when ordering my preferred networks in Network settings. Any way to fix this?

    The article at this link provided a solution that worked for me.
    http://forums.macrumors.com/showthread.php?t=1803815

  • When I shut off the computer, firefox say's trouble with ending, and then it won't save my bookmarks that i had prior. I'm losing a lot of work why is this? It won't save my bookmarks.

    when on websites, after certain time the computer freezes for time, the firefox commit charge seems to get too high to work properly. When I shut my computer to reboot, i lose my bookmarks that i had placed in my bookmark files. I lose a lot of work. Can i retrive this work somehow???

    1. You're using an old version of Firefox that is no longer supported. You should upgrade to either Firefox 3.6.17 or the newest version - 4.0.1. <br />
    http://www.mozilla.com/en-US/firefox/ - 4.0.1<br />
    http://www.mozilla.com/en-US/firefox/all-older.html - 3.6.17
    2. When you reboot your computer while Firefox is open, you risk losing data. Firefox has backups of your bookmarks file, see this to learn how you can restore a backup from a previous day.<br />
    https://support.mozilla.com/en-US/kb/Lost+Bookmarks

  • Won't save in classic mode

    I have a G3 iBook with OS 10.3.9 and OS 9 that runs in Classic mode. My applications that use classic won't save to disk. I get a message that says "File saving not allowed in that area". I bought the computer used so I don't know how it was set up. What do I need to do to get saving permission in classic mode?

    Thanks for the tip.
    I did run the utility and the log showed errors found and repaired. I ran it a second time and no errors found. I started up Excel, which runs on classic on my machine, and tried to save to the desktop. I got the same "Saving in this area not allowed" message. I bought an external disk by Lacie to use as a backup and I can't even save directly to that disk when running an application in Classic mode. I can save a file to disc in Texteditor, then open it in Word and save the file in Word, but I can't save a new file created in Word.

  • InDesign CC for Mac won't save file

    I've been using InDesign CC and working on a document for over a month. Been saving it in Creative Cloud. Have had no problem opening it, making changes and then saving it. Today I opened, made changes and the file will not save. I've tried saving it down and opening in Indesign 6 and it still won't save. I also cleared InDesign preferences and reinstalled InDesign. Still won't save when I open it up. The strange part is I'm able to open on another computer through Creative Cloud and am able to work on it and save back to Creative Cloud. No matter what I do I can't open and then save on the original computer.

    Finally discovered the problem. It was a PDF of an ad I received from an agency. Once I took it out of the document I was able to save as usual. Thanks for your help!

Maybe you are looking for