WRT54G: Browser access interface corruption?

WRT54G V.5: Completed firmware upgrade to v1.02 successfully...but...now when accessing administration interface through browser the interface seems corrupted. There are no Tabs, etc. only some random block graphics, a few populated data fields and so forth. Any idea on how to correct the corruption or the web page read error?

Which browser?
I used both IE7 and Seamonkey.
Did you enable JavaScript (not Java)?
Yes, I enabled Javascript in both browsers on both pcs.
In IE enable the scripterror display in the advanced internet options. For Firefox check the javascript error console for errors.
Since when did you have the problem? Did you try a firmware reflash to fix it?
I have not had any reason to try to access the configuration utility for a few months as everything was working fine but all of a sudden, my win98 machine lost internet. I've tried everything within windows to get the internet to work with no luck. I thought I would check the settings in the router to make sure all is well there, but, like I said, I can't use it because of the web display corruption.
Did you reset the router?
Yes, I have done a reset and have even set the router back to factory defaults via the button on the back and am in the process of setting the router back up. Still have the same problem if I try the web based config though.
I have another problem now, since I reset the router back to factory defaults, I am running the setup wizard from the disk, but it keeps asking me for a password. As I have reset the router, I assume the password is admin but that doesn't work, just hitting enter doesn't work and my old password that I had changed it too previously doesn't work.

Similar Messages

Prob with browser-based interface

hi
we have installed database server and application server on separate systems. MIS users/clients access the application by browser based interface. now, application server and database server are working properly. but when we wana access the application via browser the all the time there is an error that "the page cannot be displayed". anybody plz tell me to resolve this problem.
thanks

This sounds like the web server itself is down. I.e. the server platform is up and running, but the Apache web service is not running.
No idea what your environment consists of, but the typical way to start Oracle's Apache application server is
a) logon as the oracle o/s user on the web/application server platform
b) run the opmnctl (located at ORACLE_HOME/opmn/bin/opmnctl) to start the web server daemon
Note that this is a public forum staffed by volunteers. If you have a critical "system down" problem, you would be better served by filing a SR (Service Request) directly with Oracle Support via Metalink.

Browser-based interface give error

hi
we have installed database server and application server on separate systems. MIS users/clients access the application by browser based interface. now, application server and database server are working properly. but when we wana access the application via browser the all the time there is an error that "the page cannot be displayed". anybody plz tell me to resolve this problem.
thanks

error while accessing browser based interface and both are in incorrect forum.

Browser-based interface an fedora core 4

Al intentar ir a la pagina de inicio de la Base de Datos aparece el error:
la conexion ha sido rechazada mientras se inetntaba contactar con 127.0.0.1:8080

error while accessing browser based interface and both are in incorrect forum.

Experience with UnitedPlanet and SAP B1 browser access?

Hi all, I have seen that UnitedPlanet has a very promising and nice looking Web interface to SAP B1. Has anyone used it? Do you know if it allows browser access to all the functionality of SAP B1 that you would get via the normal client. Or only just a subset? Can it be customized?
Please see their site here...
http://www.unitedplanet.com/en/sbo
Thanks,
Kw

Even though I have not used UnitedPlanet before, it is not difficult to know what it can provide through their interact Demo. It is clear that UnitedPlanet could only allow browser access to some but not all the functionality of SAP B1 that you would get via the normal client. Only the menu item under their demo would be available. It should be customizable because it use DI API and Web interface.
Thanks,
Gordon

No browser access

I have an iMac running OS X 10.6.8; the processor is 2.4 GHz Intel Core 2 Duo and the memory is 4 GB 667 MHz DR2 SDRAM.
Last night after updating Safari and Java from system prompts, I began getting an error message about "Television Fanatic Toolbar Plugin" causing an error and I cannot access Safari at all. Firefox allows me minimal browser access but not much. I can get here, but not much else. I have run the Disk Utility to repair disk permissions, but still get the error message. If I delete the Television Fanatic Toolbar plugin entirely, will I lose my toolbar? Thanks for any help anyone can provide!
CyndyK2

I never update anything that doesn't come from Apple (you know, the bouncing message that says there are updates for my system). Since I'm deaf, I don't use iTunes, Garage band, that sort of thing so I just selected the two for Safari and Java. And there WAS one for Safari. Whether that's what did it or not, I don't know. I deleted the root plug-in listings from the library (two locations, as I recall) and after some minor hiccups, it seems to be working ok now. Thanks. : ) I found the information myself on another old post that said Television Fanatic had corrupted their Mac, but I appreciate the help.
Cyndy

TB stopped receiving emails after one with huge attachment. Updated TB. Can send but not receive. Using Yahoo POP server. Browser access works fine.

Several days ago, after receiving a 7MB attachment, I stopped receiving email on my Yahoo POP account. Browser access to the Yahoo server works fine. I obviously deleted that message and attachment but curiously, it and only it continued to be downloaded to my inbox!!! I tried downloading a new TB and installing it. Nothing changed except that specific email no longer appeared (another did though, see later). Settings are to leave msgs on server until I delete them. I transferred all my inbox to a local folder and then compacted mail and tried testing reception from another source and nothing appeared on TB, just on browser access. Oddly, one very old message repeatedly appears, I assume as a result of the auto check for new mail but not sure. Though I try to delete this old message, I can't. I haven't removed and recreated account yet because I don't want to lose all the filter history. Scanned for solution and can't find any. Any ideas, please?

Starting your mac in safe mode will disable the Symantec stuff long enough to download mail. Should the issue arise again
[http://support.apple.com/kb/ht1564 OSX Safe mode instructions from Apple]

Prime infrastructure 2.0 - Inventory error with Virtual-Access Interface

Hi,
We have recently been trying to resolve a few issues with routers which get partial inventory failures upon discovery. I have managed to narrow this down slightly with the help of the inventory.log file. (With help from this post https://supportforums.cisco.com/thread/2255346 ) I have found the following happnes when this device is added:
[2014-03-04 14:00:27,537] [ICE Service[ 1]Thread: 29] [inventory] [ERROR] - 172.16.3.202 Object detected as SAME but DB Object obtained from the database is NULL For instance id: 0 For generated POJO: PPPEncapsulation[callBack=false,callIn=false,callOut=false,multilink=false,name=Virtual-Access1,oneTime=false,owningEntityId=69757688_172.16.3.202,preferedAuthType=NONE,deployPending=NONE,name=Virtual-Access1,owningEntityId=69757688_172.16.3.202,instanceId=0,_orderedListOEIndex=<Integer>,_creationOrderIndex=<Integer>,instanceVersion=0]
I have highlighted above where it mentions the problem with the virtual access interface. The configuration on the router is for PPPoE and the virtual-access1 interface is bound to Dialer0.
It then goes on to roll back the transaction:
172.16.3.202 persistObjects called with addList size = 307, updateList size = 6
172.16.3.202 Exception while persisting: com.cisco.xmp.persistence.common.util.DMMCRUDException:,message=errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Exception occured while inventory collection for device with id 69757688: com.cisco.xmp.inventory.ice.InventoryException: errorId=12,componentName=CRUD Error Create Object Failed
172.16.3.202 Done with collection. Total call method time: 15308
172.16.3.202 Rolling back the transaction
Has anyone else come accross this issue?
I have attched the log showing just messages from this device.
Thanks,
Mike.

TAC and I found a bug, CSCum05301.
May be that is also helpfull for others.
https://tools.cisco.com/bugsearch/bug/CSCum05301/
Symptom:
Inventory collection will fail if following keywords are used as part on description command on the interface config level of IOS device: 1Gbps, 10Mbps etc.
Following error message is visible on the DWC:
Inventory Collection Status: Partial Collection Failure
Collection Status Failed feature(s)
Unable to configure DSL, Serial, POS, Ethernet, Loopback, Virtual-Interface, Tunnel, Vlan, Switchport and Service Module interfaces on ISR, ASR and Switches.
Conditions:
Speed keywords like 1Gbps, 10Mbps etc. available as part of descrption command in IOS interface level.
For example:
interface FastEthernet0/3
description 10Mbps
Workaround:
Use a space character between number and unit keyword, like 1 Gbps.

Make WRT54G an Access Point Only

I need to make my WRT54G an access point only. I tried information contained on Linksys site, but I can't seem to get it to work.
I can access my wireless router and disable DHCP fine. But when I try to change the wireless routers IP, I'm instructed to refresh/renew. Once that's done, I can no longer access the router at the old or new address.
My Netgear wired router has a range of 192.168.0.1 to 192.168.0.50.
I changed the WRT54G to 192.168.0.49, but I can't access it.
I should note that my Netgear wired router already has a Cisco router attached to it for home access to my company via VPN and VOIP. Also, the wireless router is connected to the Netgear router via a linksys switch, but I don't think any of that should really matter ....

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Dantheman2865>ipconfig /all
Windows IP Configuration
Host Name : NotebookDAN
Primary Dns Suffix :
Node Type : Hybrid
IP Routing Enabled : No
WINS Proxy Enabled : No
DNS Suffix Search List : mshome.net
Wireless LAN adapter Wireless Network Connection:
Connection-specific DNS Suffix . : mshome.net
Description : Broadcom 802.11b/g WLAN
Physical Address : 00-1A-73-3D-58-22
DHCP Enabled : Yes
Autoconfiguration Enabled : Yes
IPv6 Address : 2002:2ab7:5c22:8:1094:38ae:77d:c2d8(Prefe
rred)
IPv6 Address : 2002:2ac5:ca4a:8:1094:38ae:77d:c2d8(Prefe
rred)
Site-local IPv6 Address : fec0::8:1094:38ae:77d:c2d8%1(Preferred)
Temporary IPv6 Address : 2002:2ab7:5c22:8:35de:c0e8:c3a2:4946(Pref
erred)
Temporary IPv6 Address : 2002:2ac5:ca4a:8:35de:c0e8:c3a2:4946(Pref
erred)
Link-local IPv6 Address : fe80::1094:38ae:77d:c2d8%9(Preferred)
IPv4 Address : 172.16.3.92(Preferred)
Subnet Mask : 255.255.240.0
Lease Obtained : Monday, November 26, 2007 7:25:37 PM
Lease Expires : Wednesday, November 28, 2007 1:59:55 PM
Default Gateway : fe80::68a5:25b6:ef52:9a35%9
192.168.1.1
172.16.0.1
DHCP Server : 172.16.0.1
DHCPv6 IAID : 151001715
DHCPv6 Client DUID : 00-01-00-01-0E-15-11-5D-00-1B-24-13-5B-36
DNS Servers : fe80::68a5:25b6:ef52:9a35%9
192.168.0.1
Primary WINS Server : 42.0.0.1
NetBIOS over Tcpip : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix : mshome.net
Description : NVIDIA nForce Networking Controller
Physical Address : 00-1B-24-13-5B-36
DHCP Enabled : Yes
Autoconfiguration Enabled : Yes
IPv6 Address : 2002:2ab7:5c22:8:d89c:9395:3740:16fe(Pref
erred)
IPv6 Address : 2002:2ac5:ca4a:8:d89c:9395:3740:16fe(Pref
erred)
Site-local IPv6 Address : fec0::8:d89c:9395:3740:16fe%1(Preferred)
Temporary IPv6 Address : 2002:2ab7:5c22:8:e0b9:21d0:4a49:ac2c(Pref
erred)
Temporary IPv6 Address : 2002:2ac5:ca4a:8:e0b9:21d0:4a49:ac2c(Pref
erred)
Link-local IPv6 Address : fe80::d89c:9395:3740:16fe%8(Preferred)
IPv4 Address : 172.16.2.35(Preferred)
Subnet Mask : 255.255.240.0
Lease Obtained : Monday, November 26, 2007 10:22:35 PM
Lease Expires : Wednesday, November 28, 2007 2:14:30 PM
Default Gateway : fe80::68a5:25b6:ef52:9a35%8
172.16.0.1
DHCP Server : 172.16.0.1
DHCPv6 IAID : 201333540
DHCPv6 Client DUID : 00-01-00-01-0E-15-11-5D-00-1B-24-13-5B-36
DNS Servers : fe80::68a5:25b6:ef52:9a35%8
192.168.0.1
NetBIOS over Tcpip : Enabled
C:\Users\Dantheman2865>
I'm sorry, I hope this helps
Message Edited by Dantheman2865 on 11-27-2007 05:04 PM

Is it possible to edit the .ini of an executable and be able to add the desired ip addresses for browser access?

Hi, I created an executable and would like to add browser access ip addresses. Can this be done by editing the corresponding .ini file
if so how should I add a new line or can I modified an existing one (key).
Thanks

These lines, for example, enable access for everyone:
server.tcp.enabled=TRUE
server.tcp.access=+*
Other lines can set things like the port number, but I don't have them at the moment because I use the default. If you search the LAVA wiki, you should find an article about INI settings you can use.
As I said, if you compile the executable and use the original LabVIEW menu structure (VI Properties>>Window Appearance>>Customize>>Show Menu Bar), you will have the option of going into the Options screen of the application. In there, you will be able to set this. You can then compile the application again without the menus visible.
Try to take over the world!

SAP CRM to MS Access Interface

I have a CRM to MS Access Interface that I have to set up. Has anyone set that up before and if so;
How was it done?
Any documentation on that?

Dear Abdul!
There are probably many ways to achieve what you´re looking for. It heavily depends on several factors, which solution turns out to be the best for you. You should take into account security, data integrity and sensitivty, business context and system architecture, among others.
First of all though, you should specify wheter you want to access the SAP table for unidirectional read access only, or if you have the requirement to also update data in any SAP table (are you talking about a SAP standard table or a customer Z-table?)
If you´re looking for a straight forward solution for read-only access, you can create a custom Z* RFC-enabled function module that reads out your SAP table and returns the values to your calling application. You could also use the WebServices interfaces of your SAP WebApplicationServer, depending on your release level. Furthermore, kindly check, if there are standard BAPI´s available that contain the data you need in their return parameters.
Of course, you also could directly interface on a DBMS level between MS access and your underlying SAP DB, but most likely such a solution will never be supported in any productive environment, and for good reason. So you should look into one of the other options mentioned.
I´ll gladly provide more detail about any of the mentioned approaches, but would like to have a little more input about your requirements before, so the optimal solutions can be found.
Kind regards
Christoph

Moved to Server 2012 getting Access Database Corruption

We moved our company file shares to a new Windows 2012 server and are now having issues with Access databases becoming corrupted when accessed by multiple clients at the same time. Does anyone have any ideas on what could be causing this? We
were not having any issues with this on the 2008 or 2003 servers these were on previously.

We migrated from a Windows 2008 file server cluster with four nodes to a Windows 2012 R2 file cluster with two nodes.
After the migration to the new file server cluster our customers running Windows 7 SP1 started reporting Access Database corruption and slow file access.
However, if the SAME Access Database file was hosted on a Windows 2012 R2 file server NOT in a cluster there was no corruption.
I will not bore you with all the tests we ran while trying to determine the cause but here is what we did to fix the issue.
The solution was provided via an open case with Microsoft.
1. Create the following registry entries on all Windows 2012 R2 Servers in the new file server CLUSTER and reboot.
Key: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Value: DisableLeasing
Type: DWORD
Data: 0x1

Can Prime Infrastructure 2.0 enable port 8080 for Browser access?

By the offical document, port 8080 is pre-defintied for the Browser access but it is disabled by default.
I am finding a way to enable the port, but I cannot find any guide on cisco site.
Did anyone know how to enable the 8080 port?
Thanks in advance.
Louis

HIi Hoi;
As per cisco document : http://www.cisco.com/en/US/docs/net_mgmt/prime/infrastructure/2.0/administrator/guide/config_server_settings.html#wp1082023
Configuring Server Settings
The Server Settings page allows you to enable or disable the TFTP, FTP, HTTP, HTTPS, or Compliance Service. To turn the server settings on or off:
Step 1 Choose Administration > System Settings.
Step 2 From the left sidebar menu, choose Server Setting.
Step 3 If you want to modify the FTP and TFTP directories or the HTTP and HTTPS ports that were established during installation, enter the port number (or port number and root where required) that you want to modify and click Enable or Disable.
The changes are reflected after a restart.
I am not sure but try to change the port number 8080 in HTTP Forward option and save it, then restart it.
I think it will work.
Regards
Don't forget to rate helpful posts

Wine not working: Accessing a corrupted shared library

After installing wine via pacman (wine-1.3.3) i get only error:
bash-4.0# wine
bash: /usr/bin/wine: Accessing a corrupted shared library
Is anyone had this problem and know solution?
My Arch is 2.6.30-ARCH x86_64
thank you for any help

.:B:. wrote:Not really, if he's running 2.6.30-ARCH .
*bangs head*
I KNEW quick checks when in the office were a bad idea.

PPP IP address and virtual-access interface

With what command can I find out what IP address has been bound to which virtual-access interface of a PPP negotiated connection to an IOS router 2811/12.4(17a)?
Thanks for any hint.
Mat

Hi Mat,
try the command "sh us a" (I think the long version is show users all).
HTH, regards
Mark

WRT54G: Browser access interface corruption?

Similar Messages

Maybe you are looking for