WRT54G - CANNOT CONNECT TO THE PC'S IN MY WORKGROUP

I have followed the steps to create a wireless network; in some instances I am able to see the pc's on my workgroup however, I cannot retrieve information from them, (even though the drives are being shared). I keep getting an error message instead. Also, when I try to access a printer connected to one of the pc's, the same message keeps popping up. It has to do with administrative permission but don't understand it since all pc's have administrative accounts.

Check these links and see if your configuration is correct. Let me know if they help you out.
Wireless Network
Computer Set up
Obtain IP automatically
Richard Aichner (Ikester)

Similar Messages

WRT54G -- Cannot connect to internet

I just updated my router and gave my old WRT54G Ver 2.0 to a friend friend.   It was working on my home network with no problems.
When we got it to his house, we are unable to connect to the Internet. We have tried both the original install disk and configuring the router manually.
His ISP is Verizon DSL
He is running Win XP on his Dell desktop.
The Dell is hardwired to the WRT54G
He is able to connect to the Internet when directly connected to the Verizon provided modem.
When running Linksys install wizard, everything seems to going smoothly until we get to Step 7.   At that point we "Cannot connect to the Internet."
Any suggestions?

well , PPPoE set up is authenticating the connection with the ISP....it is not related with the office or the home environment...
if u get 192.168.1.x as the internet ip add on the router's status page , then u need to change the router's ip add to 192.168.2.1....because if u do not change it there is a conflict in the ip add of the router and that on the modem....so the need to change the ip add of the router...
however , in that case the modem has the router features still enabled....so a better way is to bridge the modem....by doing that u stop the modem to act as a router and it will act only as a modem...and allow the linksys to handle the routing feature...

HELP!!!!! I Cannot Connect to the Internet!!!!!!

I just connected my WRT54G router to my modem and hard wired my computer to port 1 on the back of the router............I cannot connect to the internet, but can connect to the router using 192.168.1.1. I am on a DSL connection. Any suggestions???? THANKS!!!!

If you were able to access the router's set-up page using the default gateway 192.168.1.1 with the modem already connected to the internet port of the router, it means that the default of the modem does not conflict with that of the router. if you cant go online, check the status tab and check for IP address. If you got values/numbers there, it should get you online. if not, if they are all 0.0.0.0, it means that you were still not able to establish connection with both devices.
try to connect your modem straight to the computer, if you cannot go online (since you have DSL connection), try to remember if your ISP gave you a username and password. Your modem is set to full bridged so in order for the router to work with the modem, set the Internet Connection type to " PPPoE" (you can see this under Set-Up tab).. and try to check if you can have IP address.
Or if there's no user name and password from ISP. configure first the router without connecting the modem. then change the router's IP address. then connect the router and configure. it should work now. just configure the wireless settings later after you are sure that you are online directly with the router.

BIB-16633 Cannot connect because the database version is incompatible with

BIB-16633 Cannot connect because the database version is incompatible with Feb 15, 2005 9:28 PM
Reply
why is this?
oracle.dss.connection.common.ConnectionException: BIB-16633 Cannot connect because the database version is incompatible with this BI Beans version.
at oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(MDMConnectionDriverImpl.java:147)
at oracle.dss.connection.server.ConnectionImpl.connect(ConnectionImpl.java:285)
at oracle.dss.connection.client.Connection.connect(Connection.java:425)
at oracle.dss.connection.client.Connection.connect(Connection.java:342)
at oracle.dss.addins.designer.OLAPSource.test(OLAPSource.java:284)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.testConnection(OlapPanel.java:244)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel.btnTest_actionPerformed(OlapPanel.java:378)
at oracle.dss.addins.wizard.configFileEditor.OlapPanel$3.actionPerformed(OlapPanel.java:120)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:245)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:141)
at java.awt.Dialog$1.run(Dialog.java:540)
at java.awt.Dialog.show(Dialog.java:561)
at java.awt.Component.show(Component.java:1133)
at java.awt.Component.setVisible(Component.java:1088)
at oracle.bali.ewt.dialog.JEWTDialog.runDialog(Unknown Source)
at oracle.dss.addins.wizard.configFileEditor.ConfigFileEditorWizard.run(ConfigFileEditorWizard.java:229)
at oracle.dss.addins.designer.BIDesignerImpl.editConfigFile(BIDesignerImpl.java:1428)
at oracle.dss.addins.designer.BIDesignerAddin.openBIDesignerSettings(BIDesignerAddin.java:990)
at oracle.dss.addins.designer.BIDesignerAddin.actionPerformed(BIDesignerAddin.java:807)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1786)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(AbstractButton.java:1839)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:289)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1113)
at javax.swing.plaf.basic.BasicMenuItemUI$MouseInputHandler.mouseReleased(BasicMenuItemUI.java:943)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
Lisa Sherriff
Posts: 137
OTN Member Since: Jan, 2001
Re: BIB-16633 Cannot connect because the database version is incompatible w ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 16, 2005 1:32 AM
Reply
Hi,
From the 10.1.2 BI Beans Install Guide it says:
OracleBI Beans supports data stored in Oracle9i Enterprise Edition or Oracle Database 10g Enterprise Edition. However, only particular releases and patchsets are supported:
* Oracle9i Release 2 Enterprise Edition, as follows:
o 9.2.0.6 for all platforms.
o 9.2.0.5 with the latest OLAP patch for Windows-only.
* Oracle Database 10g Release 1 Enterprise Edition with the latest OLAP patch.
From the error message it would appear that the Database is not one of the above.
Thanks,
Lisa
JDev QA
401488
Posts: 48
OTN Member Since: Aug, 2002
Re: BIB-16633 Cannot connect because the database version is incompatible with ( In Reply To : BIB-16633 Cannot connect because the database version is incompatible with ) Feb 18, 2005 8:01 PM
Reply
Hi,
Please note that we have follwing versions of DB up and running:-
1)Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
2)Oracle9i Enterprise Edition Release 9.2.0.5.0 - Production
With the Partitioning and Real Application Clusters options
JServer Release 9.2.0.5.0 - Production
Pls let us know the solution to resolve this problem ASAP.
Thanks.

You are not using a supported version of the database. BI Beans/OLAP only support the following database versions:
10g - 10.1.0.3 with additional OLAP patch
9i - 9205 with additional OLAP patch
9i - 9206
I would suggest that you have not applied all the required database patches to your instance.
Hope this helps
Business Intelligence Beans Product Management Team
Oraclc Corporation

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

Just bought MacBook Pro, cannot connect to the Internet at home. I have wifi at home and my iPad and cell phone can connect to the wifi

*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu 
Troubleshooting advice can depend on that information.

My Macbook Pro cannot connect to the internet using an ethernet cord.

My Macbook Pro cannot connect to the internet using an ethernet cord. It was working fine for weeks, then all of a sudden just stopped. What could the problem be?

Hi bean07670,
If you are having an issue with the Ethernet connection on your MacBook Pro, you may find the following article helpful:
Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://support.apple.com/kb/TS1317
Regards,
- Brenden

My macbook pro cannot connect to the app store is there anyway of fixing this?

my macbook pro cannot connect to the app store does anyone know how to fix this?

Read threads listed on right under heading More Like This
Allan

I am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

i am trying to connect to my friend's wifi, i have a very strong signal indicated on my ipad, but cannot connect to the internet. Yesterday i connected without any problem, can anybody tell me why i cannot connect today?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Cannot connect to the app store

Hi all,
My girlfriend has a macbook air, and wanted to update her computer to Lion. I had no problem doing that on my own macbook pro, but I can't do it on hers. She didn't update her softwares regularly, so at first I found myself having to update a ton softwares so I could finally install the Mac App Store. Once it finished installing though I was never able to actually use it, as when I open the application it just says: "Cannot Connect to the App Store". I looked up online and people had similar problems, and none of the suggested solutions worked:
- Starting up the computer in "Safe Mode" did not work;
- Repairing all the permissions in the Disk Utility application did not work;
- Signing out and in the Mac App Store from the App Store application did not work;
- The problem is certainly not the internet connection because I was able to update my computer in the same connection, and I can regularly access it on my computer.
Does anyone have a tip to solve this problem?
Thank you very very much in advance!

Thanks cpickrell but no, she is not using any firewall or antivirus program. Any other idea?

I get a message that my ipad and iphone cannot connect to the iTunes store. I have tried to sync books to my iPad and iphone and i get the message that I cannot connect to the iTunes store and thus cannot sync a book to my books app. Why?

I get a message that my ipad 2 and iphone 5 cannot connect to the itunes store when I try to sync a book to my book app. Although, when I click "store" both are able to access the itunes store. Why is this? Also I tried to open a book that was synced and a message that I did not have enough memory to load this book popped up--when I know that I have well over 40gb of memory left in my ipad and over 16gb left in my iphone. The message that I cannot connect to the itunes store is strange that it offers no option and I have to hit OK to get out and use my ipad or iphone.

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
If that doesn't solve it then what has worked for some people is going into Settings > General > Date & Time and changing the date to a few months (or maybe a year or two) in the future and then re-trying

My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect.

My iPod touch 4th gen. Keeps giving me the error message "cannot connect to the app store when I sign in. I can open the app store and browse it but I can't download anything. I have full signal strength with my wi-fi and safari is working perfect. I turned it off and restarted it 3 times now. I have an iPad 2 and the app store works flawlessly with it. What is going on?

Same here on my lpad2. Can access the web just fine from browsers but cannot install new apps or updates in appl store. Seeing a few others reporting same issue tonight so likely an apple server issue and staff will notice it in network monitors and fix it...sometime this weekend.
Rob

My phone wont back up or sync to itunes 10.6. i have a windows 7 32 bit laptop. i have tried updating the ios and receive the message saying it cannot connect to the iphone update server please check network connection. any help

have a iphone 4. i have downloaded the latest version of itunes to update the ios. I am having problems with the back up and sync and also the update. the update error message is coming up saying it cannot connect to the iphone update server. I am useing a windows 7 32 bit laptop. I have also reset my phone to factory settings. Would taking it to one of the stores and they would do it for me??
any help will be great thank you

All I can tell you is that I am having the exact same problem with an iPod Touch and that I was running iTunes 9.2.1.5 at the time it happened. Upgraded to 10.0.0.68 hoping that it might help, but no joy.
I don't want to do a restore just now since the Touch seems to be working fine. Restore will have to wait until I have plenty of free time in case something goes wrong.

Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store (iTunes could not connect to the store. An unknown error occurred (0x80096004))?

Can somebody help me in finding a solution or an explanation to the problem I am currently experiencing as well as others wherein we cannot connect to the iTunes store. An error message appears and either says "iTunes could not connect to the store. An unknown error occurred (0x80096004). Make sure your network connection is active and try again" or "iTunes could not connect to the store.Make sure your network connection is active and try again." Despite the fact that my network connection is working quite fine, this problem still persists. I can say that my connection is fine because I can surf the internet and furthermore, I used to connect to the iTunes store just before this incident happened which started from April 17, 2014 and persists until today. I tried to solve the problem by following the troubleshoot procedures given in the support section of this site but it really did not solve the problem. I believe that others are experiencing this situation as well very similar to mine when it comes to the time of occurrence as I have read in the discussions in this site. Even though we have different network connections, operating systems and other specifications, we still experience the same problem, so is there really a problem with our computers or is it with the iTunes? And by the way, my computer works under Windows XP. Thanks a lot. God bless.

Try this...
Triple click anywhere in the line below to select it and press Ctrl+C to copy it.
cmd /k netsh winsock reset
Press the WinLogoKey+R to open the run dialog, then Ctrl+V to paste, then press enter/return.
You should get something similar to this:
Reboot the computer and the problem should be resolved.
If it doesn't work then perhaps a full tear down and rebuild of iTunes will fix things. See Troubleshooting issues with iTunes for Windows updates for details.
tt2

TS3297 My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networ

My 2nd generation ipod touch is giving me the following error when I try accessing Itunes or the app store. "Cannot connect to the Store. A secure connection could not be established. Please check your date & time settings" I am on a secure networkl.

Can't connect to the iTunes Store
Make sure that time zone is correct in addition to date and time

WRT54G - CANNOT CONNECT TO THE PC'S IN MY WORKGROUP

Similar Messages

Maybe you are looking for