WRT54G cannot detect the internet!!!

I HAVE A WRT54G AND FOR SOME REASON IN CANNOT DETECT THE INTERNET. I HAVE A DSL MODEM AND IT WORKS PERFECTLY I'M ON IT RIGHT NOW. ALL THE DSL AND ROUTER LIGHTS ARE ON. I'VE USED THE ROUTER BEFORE. I'VE TRIED RESETTING THE ROUTER, I'VE TRIED POWERING OFF BOTH THE ROUTER AND DSL. NOTHING AT ALL WORKS. I EVEN TRIED CALLING LINKSYS BUT THEY WANT ME TO PAY FOR THEM TO FIX THIS PROBLEM AND I AM NOT WILLING TO DO THAT BECAUSE THIS PROBLEM HAS BEFORE AND THEY FIXED IT OVER THE PHONE I HAVE NO CLUE HOW.

As you mentioned, your Internet Service Providor is DSL you may follow the link here to re-configure your router...

Similar Messages

WRT54G router cannot access the Internet

My wireless PC can access the router but cannot access the Internet.
When I ping linksys.com - the ping times out; however, when I ping my ISP I get 4 pings back. When I ping the router the ping is successful as I get 4 pings back.
I am sure there is a fix for this problem. Can anyone help me get connected to the internet?
Thanks
I just got DSL in my area and installed it. I have a Linksys WRT54G router and a zyxek 660R DSL modem. I have a PC #2 in the room down the hall and a PC #1 in another room. I have a Wireless-G USB adapter in PC #2 (this is the antenna for the wireless connection). Everything is installed and PC #1 can connect to the internet through the modem and router. However PC #2 can only reach the access point (router) and will not access the internet. I can connect to the internet for PC #2 when an ethernet wire is used directly but it is not great to have a wire running down the hall. I pinged the router from PC #2 and the echos look fine. So it can certainly reach the router. When I use the Local Network tab and click on DHCP Clients table both PCs are displayed. So how can a PC use a wireless connection to reach the internet? I have spent 4 days already trying to get this to work. My ISP can't seem to help.
Thanks for your help.

hi... logon to router's setup page and try changing channel to 1 or 11, click on the advanced wireless settings and try reducing beacon interval to 50, fragmentation and RTS threshold to 2304, also try upgrading latest firmware on the router...also
if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G USB adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know the results.

Is there a way to access the web-based setup for my router if I cannot access the internet?

Okay, I need to change the ip address settings on my router. I have a WRT54G Wireless router. I cannot access the internet on my computer connected to the router, and do not know how to change the router settings without accessing the web-based setup page. So, back to my question. Is there a way to access this page if I cannot connect to the internet?

On the back of the router is a small reset switch. Using a paper clip or other small item, press the switch in and hold it for a few seconds. This will reset the router to the default IP address of 192.168.1.1. Enter that address in your web browser, and be sure your computer is attached to the router by an Ethernet cable. Don't attempt to do this using the wireless connection.
Once you have reached the web configuration utility you can change the DHCP settings.
To give your PC a static IP address you will need to open your network connections panel and, assuming your using Windows XP, make the changes from dynamic IP to static there.

I cannot access the internet, I tried to answer that said to go to settings, safari, tap clear history, cookies and cache, cut off, then on, but it did not work. When I go to internet the screen is grey??? please help I am a new user!!

I cannot access the internet the screen is grey, I have tried by using the answer from someone but it does not work...I went to settings, tap safari, then clear the history, cookies, and cache, then turn off ipad. When I did that twice, it did not work. How long does it take for the clear history to work? I am a brand new
user of the ipad2 and I am disappointed that this is happening already.

Have you been able to access the internet previously and now it's suddenly not working, or are you still trying to access the internet for the first time on your iPad? Are you at home trying to connect through your home router? If you are at home, did you put your home routers encryption code as your password? The encryption code is what your iPad is looking for and it is usually found on the router and is typically a 13 digit combination of letters and numbers. Let us know......

I did a software update on my ipad and now cannot access the internet. how can i fix this?

I did a software update on my ipad to 8.1 and now cannot access the internet. How do I fix this? My mail updates, but to get internet access I had to move from wifi to cellular data, and now even cellular data does not allow me access.

Hi Go to settings Reset Network Settings After Reset you need to enter your Router wireless key Before you do this turn off your Router for 30 seconds Also an option is to go on Websites for your make of Router look for any Firmware updates but you can do this later. Cheers Brian

When I open a second Profile while another is running the second cannot access the Internet until I close the first. Why?

I often have occasions to run more than one Profile simultaneously (usually because of different add-ons I've installed on different Profiles). In the past this worked fine. Now, all of a sudden, if I open a second Profile while the first is running the second cannot access the Internet until I close the first. It keeps looking for a website, and failing, until the system "times out". If I close the first Profile, the second is then able to access the Internet.
Note: this is not a problem with opening a second Window in Firefox. As long as they are from the same Profile they will both work fine. Nor does this stop me from using a second Profile to look at website files I have saved to my computer. The only problem is that the second Profile cannot get on the Internet.

I just checked, the setting was for "Automatic proxy configuration URL", in the past it was set on "No Proxy". So I'll try changing that (and/or try other proxy options), and see if that solves the problem.
If it does, then just one (academic) question remains: why did that happen in the first place? I don't care what the answer is, so long as your suggestion solves the problem.
Thanks.

Safari cannot find the internet plug in

I have a new Intel iMac that initially had no problem surfing any web site. I now have a problem with any page that contains "shockwave". As and example when I try to got to www.autotoll.com.hk I get stopped by the following message...
++Safari cannot find the internet plug in++
++The page “Autotoll” has content of MIME type “application/x-shockwave-flash”, but you don’t have a plug-in installed for this MIME type. A plug-in should be available on this page:++
++http://www.macromedia.com/go/getflashplayer++
++Do you want to open the page?++
I have gone to macromedia numerous times and tried to download and install Flash Player 9. I still get the same message.
I have also tried using FIREFOX and get the same message.
How do I install Flash Player 9 properly??????
HELP!!!

Re: FLASH 9 won't work with Safari 2.0.4 or Firefox (A FIX!!!)
Posted: Aug 24, 2007 4:44 AM in response to: threejay10
threejay10,
thanks for pointing me to the other discussion thread on
http://www.justin-cook.com/wp/2007/03/08/flash-9-doesnt-work-on-mac-os-x/
i am not that comfortable in Terminal so I opted for the one other option i could see that doesn't reliance on me typing a slew of sensitive characters into Terminal.
So, instead, I downloaded Pseudo from VersionTracker
http://versiontracker.com/dyn/moreinfo/macosx/9608
installed it in my applications folder. then dragged the Flash 9 installer onto Pseudo. Flash then installed perfectly and all is working well.
It seems there is a simple fix after all. Apparently Pseudo installs into the root and therefore, I assume, bypasses the permissions issues. After 2 days of trying to solve this, I"m happy it's over. Thanks again for pointing me in the right direction. I hope others can find this thread and the solution.
Cheers, TM

TS1398 my ipod touch worked fine on my wifi home network. After not using my ipod for a month or so, I cannot access the internet. All other devices work fine. Thus, its not my home wifi....I tried resetting...forgetting....nothing works...still cannot ac

hello - my ipod touch worked well until a couple of months of non-use. Now, I cannot access the internet thru my wifi. All my other devices have no such problem. I have tried resetting wifi, "forgetting network" turning wifi off and on....nothing works....can anyone help?

- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router.
- Reset networks settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
Does the iPod see the network? Error message? Does the iPod connect to other networks?

I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX. BOX COMES UP AS FOLLOWS:-

I CANNOT ACCESS THE INTERNET VIA MOZILLA FIREFOX
A BOX COMES UP WITH THE FOLLOWING:-
firefox-exe - Entry Point Not Found The procedure Entry Point
could not be located in the dynamic link library mozsqlite-3-all.
PLUS
When I access the internet via my server (Tiscali now Talk-Talk)
I have to enlarge each page. this is not now automatic.
What on earth has happened?
Please Help.
Thank you.

You need to do a clean reinstall.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer.

I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!

Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc. I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting fo

I have just recently brought the blackberry curve 8310 and i am not able to access the internet, MSN etc.
I rang my phone company(Crazy Johns) and they saif i cannot use the internet on this phone because they don't sell it anymore and i need a setting for it to work.
Can you please help me with this?
Thanks Matthew.

Hello,
The services you listed in your post will require a data plan which is provisioned by your wireless provider. You may want to contact your wireless provider to see if you have the correct plan.
Cheers,
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?

Since upgrading my iPhone 5 to ios 7, I cannot get the internet, email to work on 3g. I get the message ""could not activate mobile data network. You are not subscribed to a mobile data service". How do I fix it?
I've contacted o2, tried all of their suggested updates and changes, reset my phone 3 times and still no luck.
Any help appreciated.
Thanks,
Louisa

Hi, l have the same problem, were you able to resolve?

Itunes cannot find the internet

Downloaded Windows 7 64-Bit iTunes - set up complete. Error message inidcates that iTunes cannot access the internet. It will be a simple setting but can not locate this. I have allowed Firewall Access (iTunes and iTunes2) but still no access.
Any advice please?

Hi AngelZulu,
If you are having issues updating iTunes due to security software issues, you may find the following article useful:
iTunes: Troubleshooting security software issues
http://support.apple.com/kb/ts3125
Cheers,
- Brenden

Safari isn't working properly, says it cannot find the Internet plug-in

After I installed Mozilla Firefox, Safari is not working properly. It says:
Safari cannot find the Internet plug-in
The page “Now Casting - The Best in Guides & Labels” has content of MIME type “application/x-shockwave-flash”. Because you don’t have a plug-in installed for this MIME type, this content can’t be displayed.
I tried to install the flasf player and a web page appears saying that it is installed but obviously isn't.
Please tell me what is wrong so I can use my Safari.
Thank you.

Hi ivoniko,
Welcome to Apple Discussions-!!
In Safari Look in you In Safari task Bar >Help>down to Installed Plug-ins>
See if you have what you need there, if not try this article from Users Tips:
Vinko - ksafari: Suggested Safari Plug-ins
http://discussions.apple.com/thread.jspa?threadID=121772
good luck hope this helps, let us know.
Eme :~{)
Power PC G4 (3.3) iMac ♥ Flat Panel 10.3.9 & 15 Alum.PowerBook Tiger Mac OS X (10.4.5)

I cannot find the internet browser icon on my blackberry curve 9360

Hello everyone, I'd really appreciate some help please!
I cannot find the internet browser icon on my blackberry curve 9360.
I've gone to options, Device, Advanced system settings, opened the Host routing table, hit the menu key and chosen register now. I get message saying "Registration sent!"
What do I need to do now?
Many thanks in advance.

Hi wilkasmum
This article will guide you how to solve that problem: The browser icon is missing or not shown on the BlackBerry smartphone
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

WRT54G cannot detect the internet!!!

Similar Messages

Maybe you are looking for