WRT54G - cannot share folders

Hi Experts, i have Linksy WRT54G, firmware 7.00.1, am using internet cable (DSL) my network provider shared folders for movies,songs etc....i can open that folder when i connect wire to direct system (not through router) run " //super-admin ", but sharing not open when i connect internet through router how can i set dynamic ip and pppoe ip both?? Please any one can tell?

summations wrote:
i dont really know about pppoe etc...
1st : actually my network service provider gave me user name and password which i put in router configration in PPPOE...
i switched the main wire to router WAN Port , and in LAN port there are two computer connected one is mine one is my brother... i am using router just as a hub ... in this process i cant able to see network sharing computers.. when i open run in windows and type " \\super-admin" (which my network gave my address his sharing drives) the sharing didnt open .... but when i type his ip like "\\10.0.4.3" then its open but speed is zero i mean i cant see movie on from that folder and even cant download coz speed is appx 56 kbs.....
2nd : when i connevt wire direct to my pc ("not through router"only one computer run) then i have put ip address in TCP/IPv4, ip : 192.168......and subnetmask 255.255.255.0 and default gateway "NIL"... then sharing running perfectly with no problem...
i have contact to my network service provider he told that you have to configure your linksys router, unfornunately he dont know about linksys router but he told me that he faced same problem in TPlink router , he solved the problem to set pppoe and dynamatic ip both in TPlink configration but he dont know about linksys that how to set both ip...
this is all information.. hope u got it... waiting for your answer................
am using windoiws 7ultimale
Regards
Ramiz
You mentioned on this post that you want the router to be a hub, do you intend to make the router a switch or a passthrough device. If so then you might need to read this link in cascading routers through LAN-to-LAN:http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r....

Similar Messages

Cannot share folders

I can see the other computer on the map.
I can see the folders I have set for shared on both computers.
The opposite computer's folders are greyed out though. And in both directions. Meaning if I sit at computer 1, computer 2 is greyed and if I sit at computer 2, computer 1 is greyed.
Both computers have Network Magic installed. Both are fully accessible showing the map, etc. Both are fully updated.
I have been able to share in the past but not since I added these two computers. One laptop died and the other was on its way out so I got two desktops. The laptop that is still alive is not on this system (loaned out).
The two iPod Touches I have show in the map and in the shared folders and is NOT greyed. Which doesn't help since those folders either don't exist on the Touch or are not shareable in the first place. The odd thing is their listings include folders from the other computer. Like the one has a World of Warcraft folder.
Any clues on how to fix this? Sharing files is one of the reasons I love this program. That and staying online is never an issue and fixing a network problem is a breeze.
Network Magic v5.5.9195.0-Pure2.Zone
Cable modem (Charter) hooked up to WRT54G2 Linksys wireless but both are hard wired
Windows 7 Home Premium 64 bit
AVG Internet Security 2012 v2012.0.1901 (firewall and antivirus)

See this link for folder setup http://tinyurl.com/NMHelpPage
Network Magic 5.59195.0 Pure0, Platform Ver. 11.2.9195.1
Microsoft Windows Vista Home Premium Ver. 6.0.6002 Service Pack 2
HP Pavilion a6700f PC
Cisco 2203c Modem, Road Runner Broadband TWC
Linksys WRT54GSv4 1.06.3

Cannot share folders after resetting router

I'm on an Actiontec MI-424-WR router and have been sharing folders/files on my main pc to three other pc's in the house (let's call them Bedroom, Laptop, and Living Room). The main pc runs Win7 and the three others run Win7, Vista, and XP. The shared folders/files include music, videos, and pictures. I've had no issues until last night when I reset the router.
I reset the router by unplugging for 30 seconds. After the router came back online, I can no longer see the main pc from any of the other three pc's, nor can I see any other pc's from the main pc. The interesting thing is that when I use the "Test Connectivity" function in the router software, the test passes. Pinging thru a dos command seems to work, I get 4 packets sent and 4 packets received, but I also get an error message "Reply from 192.168.1.x Destination host unreachable", with 192.168.1.x being the pc that I'm pinging from. Pinging thru the router software fails.
The only change to my setup was resetting the router last night. The sharing worked fine right before resetting and stopped working right after resetting. So this is obviously an issue with the router. I suspected some settings I had tweaked a year ago when I first set up the router may have been reset to default, but everything I checked looks like it is still at my manual settings.
Does anyone have any idea what the problem might be???
Solved!
Go to Solution.

If you weren't having any problems, why did you unplug the router? ("Reset" is the wrong term to use here, as it implies use of the reset button.)
Just gathering information for the wonderful people who will be along shortly to solve your problem.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.
"All knowledge is worth having."

Windows 7 pro client cannot access folders on server 2003 domain server

I added a windows 7 64 bit client to a server 2003 32 bit domain 3 weeks ago and file sharing was working fine until today, 5/4/12. Now, when trying to access shared folders that reside on the server,
I get the following "access denied" message:
[…folder…] is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The user name could not be found.
Strangely enough...
The windows 7 client
can open shared folders that reside on the XP clients in the domain
All the XP clients in the domain can access the server 2003 folders
All the XP clients and the server 2003 machine can access shared folders and printers on the windows 7 client.
The windows 7 client can ping the server 2003 machine and vice versa
I can “see” the server in my network list, but when I click on it, I get the same “access denied” message listed above.
So... the only problem is that the windows 7 client cannot access folders that reside on the windows server 2003 machine. There must be some sharing setting that got changed
by a recent windows update.
Here is what I have done/verified so far on the windows 7 client:
In advanced sharing settings for Home/Work, Public and Domain profiles:
network discovery is enabled
file and print sharing is enabled
use user accounts and passwords to connect to other computers is selected (I also tried allowing windows to manage homegroup connections instead, but the problem remained.)
40 -56 bit encryption is enabled
In “gpedit.msc” Local Policies/Security Settings:
enabled the following policies:
Network access: Allow anonymous SID/name translation
Network access: Let Everyone permissions apply to anonymous users
disabled the following policies:
Network access: Restrict anonymous access to Named Pipes and Shares
Network access: Do not allow anonymous enumeration of SAM accounts
Network access: Do not allow anonymous enumeration of SAM accounts and shares
What am I missing? Are there policies on the server that need to be adjusted?
Please help! My business is crippled if I cannot access server files from this workstation. Thank you in advance.

As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as ‘Answered’ as the previous
steps should be helpful for many similar scenarios.  <o:p></o:p>
If the issue still persists and you want to return to this question, please reply this post directly so we will be notified to follow it up. You
can also choose to unmark the answer as you wish.  <o:p></o:p>
In addition, we’d love to hear your feedback about the solution. By sharing your experience you can help other community members facing similar
problems.  <o:p></o:p>
Thanks!<o:p></o:p>
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Share folders

hello,
i want to share folders with my pc.
i opened the file sharing, but i only have access from my pc to the one folder not all the other subfolders inside.
Because i have a lot of subfolders i cannot share them all. is there an other way?
i also tried making my pc an administrative user, with no result.
thank you

HI, on the PC, make a new user same as the Mac's admin user, when signing into the Mac, use the Mac's admin username & PW.

IMovie cannot share and no storage location set

I am using iMovie 10.0.6 on a Retina iMac running Yosemite.
iMovie suddenly developed the following maddening behavior, which I have yet to resolve despite trying many of the usual tricks:
Attempting to import to an event using my isight camera or my Canon HV20 camera in a library on my internal SSD results in the following popup message: "No storage location set: Cannot start ingest because there is not storage location set. Please set one under Storage in Preferences and try again."
It is possible to import by loading a file to my local library. However creating a project with that file results in the strange behavior that the clips from that file remain blue and don't fill in with the preview.
I cannot share or export any project. Clicking "Share" in file or the "Share" button displays the options, by when I click on the share option, nothing happens.
Importing to library in an external hard drive succeeds without the error message. The clips in the projects created in the external libarary do fill in with the preview pictures. However, I am not able to share or export a project in the external library either.
When I log into my son's account on the same machine, iMovie works fine. I am able to import to his accounts library and I'm able to share, the share button works as normal.
I have tried the following remedies, none have worked:
1)delete the iMovie app and reinstall.
2)delete every iMovie preference in ~/Library/preferences
3)delete iMovie caches
4)delete iMovie receipts
5)repair permissions using disk utility
6)reset user permissions and ACLs using "reset user password" in terminal
7)reinstall Yosemite from recovery (preserving user files)
8) reset pram and SMC
There must be some very hidden persistent setting corrupted that is either verry hidden or not explicitly part of iMovie; perhaps a common sharing or video import application? Does anyone have any ideas?

Brilliant - it worked for me, although I had to look around inside the
/var/folders/
and found it under another with two letter
Thank you ultrahertz

Tools Manage Folders to share folders pitfall to watch out for

Just thought I would share something I learned today. In Discoverer Administration, you have a Manage Folders function, which you access by doing Tools > Manage Folders. This lets you assign a folder to multiple business areas. An obvious advantage of this is that you only have to bring in one copy of an Oracle table into the EUL. Joins, item classes, and hierarchies associated with the folder are also available to all business areas as well, which also sounds great. Except if you are exporting/importing individual business areas rather than the whole EUL. Then you can run into potential problems with the import. At McCarthy, we do not use the Oracle seeded business areas. We develop our own. We have a development environment we use to create business areas and workbooks. When ready for users to test, we "promote" the appropriate stuff (business area and/or workbook(s)) by exporting out of development and importing to the test instance. When users approve what is being worked on, we then "promote" to production, again via export/import of business area/workbook. In this kind of environment, sharing folders caused us to run into import errors, because of trying to reference folders and joins and item classes and stuff that did not exist yet in the instance we were promoting to (had been created in another business area originally). I logged a service request with Oracle support. Support's reply is that it is their suggestion to customers to import a new copy of an Oracle table into a new business area, rather than attempt to share folders, because of this potential pitfall. So just something to consider if you want to try and share folders among business areas.
John Dickey

Rod,
I agree. That is another option. But it still faces potential danger. Let's say I create business area A. I import Oracle tables into that business area, say for project expenditures, project master, and people master. I create a join between expenditures and project master and a join between expenditures and people master. I create an item class LOV called Project ID LOV and assign project id column from expenditures and project master folders to that item class. I create an item class called Person ID LOV and assign person id column from expenditures and people master folders to that item class. Now I create business area B. I bring in the Oracle table for assignments. I use Tools > Manage Folders to assign the people master folder to B and the projects folder also to B. That sharing brings both item class LOVs into business area B, as well as all existing joins for those 2 shared folders. In B I do want to use the Person ID LOV. If I export and import the people master folder, I should be okay, since I am not bringing the joins or item classes in - just the folder. Next I do want to export Person ID LOV. If I then try to import that Person ID LOV, I will get import error, because this item class is assigned to a column in a folder (expenditures folder in business area A) that I have not yet imported to the target instance. So I would have to know and manage that I need to export/import the Expenditures folder first before I export/import the item class I want. Trying to manage all of this seems like it would be a pain, in my mind. You and others may disagree. The simplest process seems to be to keep the business areas self contained (or independent - whatever you want to call it) and then you can export/import using the business area option without any issues (or none that we have run into yet). That was the way things were being done before I arrived and after Discoverer training, which covered the Tools > Manage Folders function, I talked the folks into trying to share folders rather than importing new "copies" (really, a new definition) for each new business area. The concept of sharing folders across business areas sure seemed like the smart way to go at the time. Oh well, live and learn. But certainly what you have suggested would be another way to handle this kind of situation - cannot argue that.
John Dickey
Edited by: John Dickey, McCarthy on Mar 3, 2010 2:40 PM
Edited by: John Dickey, McCarthy on Mar 3, 2010 2:41 PM

How to alow non-default domain users to set share folders.

From Messanger Express, users who are in non-default domains cannot set any share folders, and only get an error message "You do not have permission for setting permission". However, Users in default domain can do it without any problem in same server[iMs5.2].
Is there any specific permission to allow non-default domain users to do it ?
If yes, how to give this permission to these users ?
Thanks & regards,
Takuto

In deed it is fix in the GA.Another way to set the alias table is to do it in the Admin client. If you add a connexion to a user there is a new 6.5 button "set alias" that allow you to set the default alias table for this specific user. But, it does not exit on a user group level.

Family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment

family sharing. i have set my wife up on family sharing and each time we try to download a book or an app, we are requested that i update the payment details. I have done this and we still cannot share.. what do i do or how do i update the payment details to enable my wife to download

Drrhythm2 wrote:
What's the best solution for this? I
Copy the entire /Music/iTunes/ folder from her old compouter to /Music/ in her account on this new computer.

After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

After upgrading to Yosemite I cannot share my pages document by mail as a word format - HELP please!!!

You don't need to go to the App Store to for support for Steam and Minecraft. You need to go to their website(s).
You're welcome

Cannot share desktop - Lync 2013 server and Windows 8 (64-bit) client

Currently my new Lync server cannot share a desktop through a Lync 2013 client installed on a Windows 8 workstation. The client is patched up with the latest MS patches (much beyond the patch issues noted about a year ago, the patches in question do not
even show up as installed).
I get the same "An error occurred during the screen presentation" message. I do have a NVIDIA video cards on the workstations, but they too are patched up. The same systems have no issues sharing desktop screens in the Lync 2013 client on Windows
8 systems when they are connected to a Lync 2010 server.
I have no idea where to go from here. Any suggestions or help is greatly appreciated.

Did this issue happen to other Lync 2013 client?
As you mentioned that you can used the same Lync 2013 to sharing desktop screen when it connects Lync Server 2010 while you couldn’t share desktop screen when it connects to Lync Server 2013,
I think it is related with Lync Server.
Please check if you can find any errors on Lync Front End Server.
Check all Lync server services are all started.
Lisa Zheng
TechNet Community Support

Cannot view folders in mini bridge

Hello,
when trying to use mini bridge in ID CS6, I cannot view folders. I can look at drives, and places such as desk top, but it will only find individual image files, and cannot find any folders. As most of my assest are in folders, this is exceedingly frustrating. I remember CS5 not having this issue. Is there a preference or setting I am missing, or is this how Adobe always "improves" their products when they update.
Any help is appreciated.
Thanks

I have done that, but it still does not find folders. Specifically, let's say folders within folders. I mentioned that I can find places, such as desktop, but it won't find 'folders' on my desktop. Just indivdual files. Here is a screen shot of what I mean. On my desk top, I happen to have a folder of assets, but it is not finding it when I have 'desk top' highlighted in the navigation. This is a problem that there seems to be now answer for.

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5

Ipad mini retina cannot share hot spot with Bluetooth for Iphon5
But When my Iphon5 share hot spot with Bluetooth for Ipad, I can share.

Dear Texas,
iOS: Understanding Personal Hotspot
http://support.apple.com/kb/HT4517
Ipad and Iphone can connect bluetooth.
Yes, if Iphone5 share hot spot Bluetooth for Ipad mini. (Work fine)
But when Ipad mini (IOS 7.04) share hot spot Bluetooth cannot connect with Iphone5.
Adisornj

Cannot share screens, help please.

computers:
imac : 10.5.2, one gig memory, a second monitor is hooked up to the imac, router is dlink DI-524 (at different location...) the imac is brand new.
g5 dual 2.0 : 10.5.2 ghz, 2.5 gigs memory, linksys router wireless g broadband router with rangebooster
problem:
cannot share screens
at one time we had a problem video chatting. i opened the ports on the dlink according to apple's tech note or page about third party routers. (but we also replaced the mac with a new one.) anyway...
we can now video chat.
we can use ichat theater.
we cannot share screens
connection speeds for the imac are 3mbps down and 600kbps up
connection speeds for the g5 are 5mbps down and 330kbps up
the g5 has had no problem connecting to others, sharing screens
connection doctor reports no problems
connection doctor reports all features are available for the imac
connection doctor reports all features are available for the g5 except Backdrop Effects
what happens when we try to share screens:
we get a fail to connect message. but, for a second or two i can hear the other person, then the connection fails... i have seen the screen sharing starting message, but it would stop and fail. 3 seconds tops..
thanks,
g.

Screen Sharing is based on Apple Remote Desktop
Try opening port 5900 and 5988 (both TCP)
Ralph

Can i share folders with a PC?

Is there a way to share folders between MAC and a PC?

yes: http://support.apple.com/kb/HT1549?viewlocale=en_US

WRT54G - cannot share folders

Similar Messages

Maybe you are looking for