WRT54G Configuration Page Problem

Hi, I'm having a tiny problem. When I select save changes to anything on the configuration pages, it doesn't say Save Successful anymore but it did before, it's just a white screen. Any ideas?

Are you trying to configure it wirelessly? If yes then first of all hardwire a PC to this router and then try to configure it. It may also be the issue with the IE settings. Try deleting temporary internet files and cookies from internet options. Reduce the security and privacy settings to low. Upgrade the firmware if needed.

Similar Messages

  • WRT54G Configuration page in spanish - Help

    Hi folks, I have just bought a WRT54G v5 and went through the setup wizard with no problems. However when attempting to access the configuration page (http://192.168.1.1) it appears in spanish. I have updated the firmware in management mode but still get the same problem. Anyone have any ideas on how to solve this problem?
    Thanks in advance.

    your device is wrongly shipped...
    try downloading a TFTP file... and try to reflash a firmware from the US website..
    this solution will not guarantee that it can solve your issue..
    (Mod note: Edited for guideline compliance.Thanks!)Message Edited by JOHNDOE_06 on 10-18-2006 11:50 PM

  • WRT54G's Configuration page wont load after firmware update.

    I recently updated the firmware for WRT54G v3 and now when I connect to the configuration page it's jumbled and no options load. Is there a way I can reflash the firmware on the router via a program. I am kinda in the dark on this one so please help. On the brightside now my NAT settings on my 360 are open.

    Go to www.linksys.com/downloads. Open product BEFW11S4 and choose version 3.0.  Then on the downloads menu download the BEFW11S4 Set-up Wizard. Run this software, Server is the router (192.168.1.1), password is admin, file is the firmware for your WRT54G and then hit upgrade.

  • Configuration Page Garbled on WRT54G V5

    Hi,
    When I access my router via 192.168.1.1 the page is garbled. ie links are missing and there are bits missing on the page. This happens if i access the router from my PC or remotely from my laptop. Laptop is on Xp and PC is on Vista.
    I guess reloading or upgrading the firmware will fix but I cannot get to the configuration page to do it. Is there any way of upgrading the firmware without using the router's config page?

    try disabling the firewalls of the computer that you're using and also update the router's firmware using this website → http://www.linksys.com/downloads and also try using the knowledge based website → http://www.linksys.com/kb to follow the steps on how to properly upgrade your firmware... hope this helps...
    ♥ Registered TradeMark Since 1987 ♥

  • Configuration page lost

    Greetings!
    Before I go any further here is the router I am dealing with:
    Linksys WRT54G
    Version 3
    s/n CDF80E1 05393
    Yes I am aware that this is rather old unit. 
    My problem is this, I have turned this router into an access point, connecting it to the 2wire router that was given to me by my DSL company.  I made the 2wire IP 192.168.1.254 and the linksys router's IP 192.168.1.1.  Now after intial setup I can no longer access the linksys router's configuration page.  I go into internet exploder and type into 192.168.1.1 and it pretends that there is no such page.  I do not even get the pop up window asking for the user name and password to log into the router.  How do I find this page again so I can make further adjustments to my linksys settings?
    Just for clarification the access point works quite well.  The devices I connect to it are able to connect to the internet with no problem.  I just can't find the configuration page. 
    Any help would be greatly appreciated.
    Jason

    Disconnect all the cables from Linksys router.
    Connect the computer to the Ethernet port 1 on the router. Press and hold the reset button for 30 seconds. Release the reset button and wait for 30 seconds. Power cycle the router. Try to open the setup page of the router using 192.168.1.1.
    You want to use WRT54G router as access point.
    Change the wireless settings as required.
    Click on setup tab and disable DHCP server. Save the settings.
    Connect the cable from AT&T router to Ethernet port 2 on WRT54G router.

  • Error on External Serrvice Configuration Page NW 20047s SP10

    Hi All,
    I am working on CAF developement. I was trying to develop an CAF application using External Service. I used SAP ECC 5.0 server to import a RFC functional module. It was successfully imported in NWDS. Also it got successfully deployed on the Server NW2004s SP10. But when i opened external service configuration page -> service registery it gave me a null pointer exception.
    To solve the problem, i removed the RFC functional module from NWDS and
    re-deployed the same application, but the error is still there.
    One solution i got is to undeploy the application from the server. After doing this I was able to get the External service configuration page -> service registery without any error. BUT WHEN I DEPLOY THE SAME APPLICATION REMOVING THE RFC THE ERROR IS COMMING AGAIN.
    I think there must be some entry on the server which stores the External services imported on the NW 2004s server.
    Please Help. ITS VERY URGENT
    thanks in advance,
    Regards,
    Sheetal

    I am not using date in my program. Follwing is my error.
    Failed to process request. Please contact your system administrator.
    [Hide]
    Error Summary
    While processing the current request, an exception occured which could not be handled by the application or the framework.
    If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
    Root Cause
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
        at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
        at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
        at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
        ... 47 more
    See full exception chain for details.
    System Environment
    Client
    Web Dynpro Client Type HTML Client
    User agent Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1)
    Version null
    DOM version null
    Client Type msie6
    Client Type Profile ie6
    ActiveX enabled
    Cookies enabled
    Frames enabled
    Java Applets enabled
    JavaScript enabled
    Tables enabled
    VB Script enabled
    Server
    Web Dynpro Runtime Vendor: SAP, build ID: 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:12:34[UTC], changelist=421181, host=pwdfm101), build date: Thu Dec 28 17:06:00 GMT+05:30 2006
    J2EE Engine 7.00 patchlevel
    Java VM Java HotSpot(TM) Server VM, version:1.4.2_12-b03, vendor: Sun Microsystems Inc.
    Operating system Windows 2003, version: 5.2, architecture: x86
    Session & Other
    Session Locale en_US
    Time of Failure Fri Jan 12 09:47:51 GMT+05:30 2007 (Java Time: 1168575471082)
    Web Dynpro Code Generation Infos
    sap.com/cafUIconfiguration
    SapDictionaryGenerationCore 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:52:59[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapDictionaryGenerationTemplates 7.0010.20061002105236.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:53:17[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
    SapGenerationFrameworkCore 7.0010.20060719095755.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:40:44[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
    SapIdeWebDynproCheckLayer 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:58:51[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCommon 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:39[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelCore 7.0010.20061002105432.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:41:32[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
    SapMetamodelDictionary 7.0010.20060719095619.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:50:36[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
    SapMetamodelWebDynpro 7.0010.20061002110156.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:55:32[UTC], changelist=419397, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationCTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    SapWebDynproGenerationCore 7.0010.20061002110128.0000 (release=645_VAL_REL, buildtime=2006-10-21:15:59:00[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
    SapWebDynproGenerationTemplates 7.0010.20061016112122.0000 (release=645_VAL_REL, buildtime=2006-10-21:16:19:13[UTC], changelist=421181, host=pwdfm101)
    sap.com/tcwddispwda
    No information available null
    sap.com/tcwdcorecomp
    No information available null
    Detailed Error Information
    Detailed Exception Chain
    java.lang.RuntimeException: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:661)
         at com.sap.caf.wd.services.registry.VwOverview.wdDoInit(VwOverview.java:133)
         at com.sap.caf.wd.services.registry.wdp.InternalVwOverview.wdDoInit(InternalVwOverview.java:275)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.doInit(DelegatingView.java:61)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.view.View.initController(View.java:445)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:579)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:155)
         at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:43)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:709)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:724)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:555)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.makeVisible(ViewManager.java:789)
         at com.sap.tc.webdynpro.progmodel.view.ViewManager.performNavigation(ViewManager.java:296)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.navigate(ClientApplication.java:767)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.navigate(ClientComponent.java:873)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doNavigation(WindowPhaseModel.java:498)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:144)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:299)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:752)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:154)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.caf.rt.exception.CAFBaseRuntimeException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:208)
         at com.sap.caf.wd.services.registry.VwOverview.loadServices(VwOverview.java:657)
         ... 46 more
    Caused by: com.sap.engine.services.ejb.exceptions.BaseEJBException: Exception in method getExternalInterfaces.
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:493)
         at com.sap.caf.mp.core.data.service.DataServiceBridge.getExternalServices(DataServiceBridge.java:201)
         ... 47 more
    Caused by: java.lang.NullPointerException
         at com.sap.caf.mp.mmr.adapter.ServiceDefinitionTypeConverter.convertExternalInterface(ServiceDefinitionTypeConverter.java:507)
         at com.sap.caf.mp.mmr.adapter.MMServiceRetrievalAdapter.getExternalInterfaces(MMServiceRetrievalAdapter.java:547)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerBean.getExternalInterfaces(MMServiceRetrievalAdapterCallerBean.java:158)
         at com.sap.caf.mp.mmr.ejb.MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.getExternalInterfaces(MMServiceRetrievalAdapterCallerLocalLocalObjectImpl0_0.java:477)
         ... 48 more
    Thanks and regards,
    sheetal

  • How can i print a network configuration page , i need the IP on a ph1510

    how can i print a network configuration page , i need the IP on a ph1510

    Hi,
    What is the exact printer model?
    If it is the HP Deskjet 1510, this is a USB printer and it does not offer any network capabilities.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to reprint the Device Configuration page?

    Im installing my new printer for first time and was parially thru the wireless connection option set up and it printed off the Device Configuration Page but the page was partially blank and now I need the  printer IP address to complete the install and set up. how do I find that? where? 

    Please read this post then provide some details.  What printer model? 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • DONE button is not working in Oracle Configuration page in Order Management

    Hi,
    We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
    Please help us to come out ot this problem.
    Thanks
    Krishna

    Hi,
    We are in 11.5.10.2 application, In order managemnt DONE button is not working. Once we choose all the options and click on DONE button the configuration page is not closed.
    Please help us to come out ot this problem.
    Thanks
    Krishna

  • Accessing the online web-configuration page

    I own a Linksys-G WRV200 wireless router, and I have tried to access the online configuration page and a page comes up that says
    401 Bad Request
    cannot use wireless interface to access web.
    Now, I do not have the disk that came with the router but I do have the software for my router, downloaded from this website. I have done the process where you go into command prompt and type "ipconfig /release" then "ipconfig /renew", and it did not work, unless I have to restart my PC again after I did this process, which i have not.
    Are there any other ways to open this web-configuration? The only reason I want to do this is so I can edit my NAT settings and Port Forward, is there any other way to do this without the online web-page? 
    Thanks in advance

    To view the router's web pages:
    You do not need an Internet connection.  The router's "web pages" are built into the router.
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router (often, an attempt to connect wirelessly will fail).
    In the non-working computer, temporarily turn off your software firewall.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem.  Report back with this problem, and also state the make and exact model number of your modem (not the Linksys router).
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
    If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
    If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

  • Javascript error throws the portal theme configuration page

    General Description: Javascript error and jump to the portal theme
    configuration page
    EP: NW04s SP12 including KMC
    We have a problem when we entry to the portal, a javascript
    error happens and immediately jumps to the portal theme configuration
    page. We entry at the portal with a user that have assigned the next groups.
    LR_Administrador LR_Administrador Base de datos UME
    Everyone Built-in Group Everyone Adaptador de grupo integrado
    Authenticated Users Built-in Group Authenticated Users Adaptador de
    grupo integrado
    The group LR_Administrador have assigned this role
    Nombre unívoco:
    pcd:portal_content/kof.com.mx.EP6_FLD_KOF/kof.com.mx.FLD_MX_LR/kof.com.mx.FLD_MX_LR_Roles/kof.com.mx.LR_MX_ROL_Administrador
    Nombre de visualización: kof.com.mx.LR_MX_ROL_Administrador
    Ubicación:
    pcd:portal_content/kof.com.mx.EP6_FLD_KOF/kof.com.mx.FLD_MX_LR/kof.com.mx.FLD_MX_LR_Roles
    Descripción: Libro Rojo
    ID unívoco: ROLE.PCD_ROLE_PERSISTENCE.38yt+Psq/fFQuE3Uxdt52Azfdpg=
    The role LR_MX_ROL_Administrador, have assigned only one page called:
    LR_MX_PAG_Edicion
    This page contains a KM Navigation iview.
    When we entry with this user, the browser show us this javascript error:
    Linea: 107
    Car: 116
    Error: 'children' es nulo o no es un objeto
    Codigo: 0
    URL: http://fedbdvep:50000/irj/portal
    And immediately show the portal theme configuration page.
    We need that the user see the page assigned, but this error shows him
    always the portal theme configuration page. This kind of error happens with
    other roles too. We've found a workaround
    for this situation, doing click on the first level navigation, the
    LR_MX_PAG_Edicion page shows normally.
    Thank for any help.
    Regards
    Jose

    Thanks for your update, we have resolved the issue with this help. Very thankfull.
    regards,
    kishore

  • WAG200G not load configuration page

    Hi. I have a WIRELESS-G ADSL Home Gateway WAG200G. 
    When i try to access in the configuration page my router, the page isn't load correctly. I can connect with my username and password, but only half page is load. 
    If i access in the configuration page with smartphone, the page is load correctly. 
    The problem seems the Ehternet Cable, because if i access with Wriless connection i don't have problems. 
    I tried hard reset.
    I tried to search last firmware.
    I tried to disable antivirus and firewall.
    I tried to change browser (Chrome, Explorer and Firefox).
    I checked the IP from router and PC.
    I tried the configration with setup wizard, but the "Setup Wizard unable to locate the Gateway on you network". 
    I tried  http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3676
    I tried http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3997
    I tried http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=4008
    I contacted your supporter in the live chat. Case number: 04143326.

    Hi karftal. It's probably the computer that's not loading the page properly or the Ethernet cable. Change the cable and/or use another computer and try accessing the setup page again.

  • HP 8600 web configuration page -- run browser as administrator?

    Setup for my new HP 8600 Pro Plus went flawlessly, including eprint, apps etc -- except for the fact that I couldn't access the web configuration page. I tried on three different computers with different browsers, and no luck. When I tried to access the 192.168.1.xxx address, nothing would happen, it would just eventually time out on a blank page. No error message.
    As a last stab in the dark I decided to try starting IE as admin (i.e. right click in Win7 -> "run as administrator"), and that solved the problem. Has anyone any idea why this should be? Is it a setting in the 8600 configuration that I can change?
    I also have an older HP printer (HP 2300dn) and I can access that printer's configuration page without running the browser as administrator.
    Computers: Win 7 x64, Win XP x86

    Hi there johnk22,
    This is quite odd. To eliminate any software issues on the computer side try downloading and running the print and scan doctor located here:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
    It can fix a lot on its own and if not give a better idea of what is going on. Additionally could you tell us what version of IE you are using? I suspect that this may be partly due to security settings.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Officejet 6000: Network Configuration Page prints over and over

    When this printer runs low (NOT out!) of ink, it begins printing the "HP Network Configuration Page" over and over and over. Installing a new cartridge seems to solve the problem, but I'd rather empty the one that's in there before throwing it away in favor of a new one and wasting paper in the process. I'd appreciate some help.

    Hello vancat,
    You need to place the alignment page that is printed on the scanner glass and then press the Scan button. This will complete the alignment process.

  • Why does my printer randomly cycle and print a network configuration page?

    My HP Photosmart C4795 randomly cycles like it is cleaning the printer heads. Sometimes it is hours between this cycling. Sometimes it will print a network configuration page without being requested.
    There are 3 computers connected wirelessly. Both run Windows 7. The wireless signal has a very good signal - the router is ~12 ft from the printer.

    It could be a power issue.  If the power fluctated the printer would restart which might cause it to do a dirty power print clean.
    If you have a surge supressor I would try that.
    Not sure why the network config page would print with a power surge, but another possibility is a friendly neighbor playing with you by sending printer clean reauests and network config print jobs. :-)
    Please mark the post that solves your problem as "Accepted Solution"
    Sometimes it takes several posts back and forth to get to a solution - please be patient.
    I am employed by HP

Maybe you are looking for