WRT54G connecting to Netgear fvs338 Firewall

Has anyone connected a WRT54G behind a Netgear Firewall.  I can't seem to get the Lynksys to connect to the Netgear Firewall.  I don't need the router but I do need the wireless.  I have to use the Netgear FVS for work.  Any help appreciated!!!

Okay… configure the linksys router according IP range of firewall, if firewall is running on e.g. 192.168.1.1 and change LAN IP of router to 192.168.1.2 and disable the DHCP server and save the settings, make LAN to LAN connection between firewall and router and power cycle the n/w check whether it works or not…

Similar Messages

  • WRT54GS linkage question/Netgear wireless router add-on

    My house has a wired Linksys setup and my roommates and I wanna add wifi to it. Question is: Can EFAH05W EtherFast® 10/100 5-port Auto-Sensing Hub be linked up to WRT54GS Wireless-G Broadband Router with SpeedBooster or WRT54G Wireless-G Broadband Router or WRT300N Wireless-N Broadband Router, so we can have wifi and have more then four 10/100 ports with wifi access for laptops?
    Our current configuration: EFAH05W EtherFast® 10/100 5-port Auto-Sensing Hub + BEFSR41 EtherFast® Cable/DSL Router with 4-Port Switch connected to BEFCMU10 Cable Modem with USB and Ethernet Connections
    I figure with our current configuration, all that is needed is the WAP54G Wireless-G Access Point.
    Also, I got a Netgear WGR614 v6 54 Mbps Wireless Router for free from Dell when I bought my laptop. Is there a way of connecting it to my households current configuration as a wireless access point? I tried connecting it to my cat5 plug in my room, but can't get anything to work but I do see activity on my network connection.Message Edited by DKSquall on 09-02-200601:54 AM
    Message Edited by DKSquall on 09-02-2006 07:15 AM

    You can connect it this way:BEFCMU10 Cable Modem with USB and Ethernet Connections connected to  BEFSR41 EtherFast® Cable/DSL Router with 4-Port Switch then connect your  Netgear WGR614 v6 54 Mbps Wireless Router.
    Your WGR614 v6 will be the access point for the network.
    You can start with that thought for your network setup.
    Dark Magician

  • When connected to NETGEAR WNR1000, I can't remotely access Airport Extreme attached hard drive.

    I have a hard drive connected to my Airport Extreme at home and I am staying at a friend's place where I am connecting to the Internet via a NETGEAR WNR1000 router (which is routing a broadband-cable connection from Comcast Xfinity).
    When I am connected directly to the cable modem, the Airport Extreme's drives shows up in my Finder but when I'm connected via the NETGEAR router it doesn't show up.
    There must be some setting in the NETGEAR router that is blocking access but I've not got clue one what setting I need to adjust or change on the router.
    Could someone please advise me?

    I checked the NETGEAR router settings and it was not configured to block any services or sites. I did as you advised and set up Port Mapping/Forwarding from 548 to the IP assigned to my Mac but nothing showed up in the Finder (no Shared Devices etc).
    I then connected directly to the cable modem via ethernet and Shared Devices showed up in my Finder window with my Airport Extreme. I connected to one of the drives connected to the AEBSn, then unplugged the ethernet and connected the NETGEAR back to the cable modem and thus my MacBook Pro was connected via WiFi to the NETGEAR router and to the Internet.
    Shared Devices disappeared from my Finder window, BUT the HD I had connected to remained connected. It was listed under my MacBook Pro's name (3rd item after the local HD, "Network"). The icon is a blue and white drive with the WiFi logo on it.
    I verified that I could access the files on this remotely connected drive and did a Get Info and in the window that popped up it said "Server: afp://MilkBar._afpovertcp._tcp.malckwan.members.mac.com/Untitled%2001".
    I tried to use the Connect To (Cmd-K) to connect to another drive attached to the AEBSn (Untitled%2002) using the same formatted address but could not connect.
    PS. I did verify that I was mapping Port 548 to the current IP assigned to the MacBook Pro.

  • HELP I have a wireless Linksys router WRT54G connected th...

    HELP I have a wireless Linksys router WRT54G connected through my cable company broadband modem on a Mac. I have another computer to which I installed wireless capability because it didn't come with it. This required attching some piece of equipment to the back of the PC which enabled it to get on the internet without another cable modem. My question is this. If I get an iphone or a laptop(with built in wireless ability) will I automatically be able to go on the web because of the router on the Mac.

    yes certainly... if you get any wireless device in network that would certainly connects to a wireless n/w of router...

  • IPhone4 does not connect to NETGEAR-DaulBand-N, my iMac does?

    I thought in the iPhone4 spec it says it does Wifi 802.11 b/g/n
    I have tried to even put in NETGEAR-DaulBand-N as the wifi point, and it can not find it, it only sees & connects to NETGEAR-2.4-G & not the "N" which is faster. My iMac can get the NETGEAR-DaulBand-N, but not the iPhone4? Am I missing something?

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

  • Connecting to netgear range extender

    I have a netgear wifi router and connected the netgear wn2000 range extender to push the wifi upstairs in my home. My ipad detects the extender and shows it on the list of available networks then prompts me to enter the password to connect. The ipad keypad pops up so i can type in the password but no letters will type in the password field. The keypad is working for all other functions such as email and google etc. Is anyone using this netgear range extender and if yes, how did you connect. Any problems entering the password? Thanks!

    You sure can use the netgear extender with your verizon router.... just DONT follow netgear's instructions. After messing around for hours with no luck I tried this and it worked.
    1) turn OFF your laptop's wireless connection
    2) Connect your laptop to the extender's Ethernet port and plug in the extender
    3) after the extender boots it will show two lights
    4) open your browser and it should take you right to the extender's genie
    5) follow all the prompts using your Verizon router's id and password
    6) disconnect the Ethernet connection and turn the laptop's wireless back on
    Good luck

  • Trying to connect through  Netgear

    I am trying to connect via Netgear router. My Airport says connected but when I try to connect to internet it won't pull anything. Any suggestions?

    I, too tried to connect through Netgear. I got the connection up and running, but the Netgear kept shutting on and off. I finally read the reviews of the new Netgear products and wound up returning it to Fryes. While I was there, I met a Fryes customer- a big corporate IP guy, and he said that a lot of companies are pushing the Netgear line, (they get big incentives) but many companies and individuals that he works with have had nothing but problems on their PCs as well as MACS. He suggested that I switch to the highest end Lynksys, (I used to have an old one). I bought the new Lynksys, installed it in about 15 minutes, and have never had even one problem with it! By the way, he was there to return a Netgear for a client as well! Good Luck, and I hope you solve your problem!

  • WRT54g connected to modem with router

    Got a WRT54g connected to a cable modem which acts as a router.  The WRT54g gets an IP address (192.168.1.x) from the cable modem and the WRT54g can ping and tracert to sites on the internet (from the diagnostics page).   The WRT54g is acting as a DHCP server for the 192.168.9.x network and I have the cable modem connected to the WAN port.  (I need to have the cable modem connected to the WAN port b/c I'm using all the ports of the WRT54g.  I want to have the cable modem connected to the wan port too so the network are separate subnets). 
    Any idea why packets would not be going through the WRT54g?  I've tried setting the router and gateway modes, neither of which work anymore.  I think I used to have it set to router and it work. 
    Any thoughts? Suggestions?
    Thanks in Advance.  

    What network is 192.168.9.x...What other router router you have apart from wrt54g?What is the model number of the other router?What is the exact physical connection between the modem and the routers?

  • I have connected a Netgear Readynas RND2000 v2 to my Mac Mini running OS10.10.1 but it is not recognised what is going wrong?

    I have connected a Netgear Readynas RND2000 v2 to my Mac Mini running OS10.10.1 but it is not appear on my LAN what is going wrong?

    What is a "Netgear Readynas RND2000 v2"?
    Can you provide a link as to what it is?
    If you mean a NAS (Network Attached Storage) did yo follow Netwgear's setup instructions? You connect a NAS to your network, not directly to your Mac

  • Trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?

    I am trying to connect a NetGear Wifi Range Extender to my existing Wifi. I have an Airport Extreme Base Station and I am also connected to a Vonage Phone Router. Any help would be appreciated?
    The Apple update Firmware for my Airport Extreme Base Station does not update for some reason? Help?
    Additionally, I have an older version Airport Express that does not update with the newer Airport Utility Version 6.3 and asks me to download 5.6 to update? Is this worth it?
    Thanks

    The netgear is not going to work very well.. and not at all unless it is universal wireless extender.. you cannot use WDS method.
    If it does support universal wireless then make sure the airport uses a rational SMB compatible wireless name.. not an apple name which is 35 characters long with spaces and illegal characters like apostrophe.
    So nice AE name.. AEwifi and actually while you are trying.. fruitlessly to do this.. use AE24ghz and AE5ghz (so different names on the different bands)
    Assuming your AE is gen3 or greater.
    You should also fix the wireless channel at least for 2.4ghz since the netgear is probably only going to repeat 2.4ghz so use channel 11, as a trial.
    And use no wireless security as a test.. if that works.. then use WPA1 & 2.. as often old equipment using WPA2 is not compatible.
    If it fails with simple name.. fixed channel and no security. Sorry it is not compatible at all.. it happens.
    If your AE is G wireless or earlier model.. really the time has come for replacement.
    If your Express is G wireless model it is not supported.. and is too old to bother with expect I guess if you want to run audio to a speaker.
    You must use older 5.6 utility to do this.. so do you have a computer running older OS.. up to Mountain Lion it is easy to install with a bit of manipulation.. later is much harder .. or windows computer anywhere or available to you.

  • I am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on an

    am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop

    Hi K8tym,
    Please refer to below article.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thanks

  • Using the latest firmware. My WRT54GS (connected through...

    Using the latest firmware. My WRT54GS (connected through a LAN cable) seems to randomely disconnect me from the internet for no apparent reason. For some reason, it can't find the DNS even though my cable modem shows that a connection is there. The only way I can get it working again is unplugging the router, reconnecting the, going into the router status menu and hitting DHCP release, then DHCP renew.
    I'm not sure whats causing this though. Any help would be appreciated.

    My GSv6  will function perfectly until my cable ISP decides to change my WAN IP address.   When they do that the router will drop internet connection  and I have to go throught the reboot process for the modem and router.  Sometimes this works and all is well again until the next ip change, but other times there are still sporadic outages.

  • Hp officejetpro 8500 a909g cannot connect to netgear n150

    HP OfficejetPro 8500 A909g cannot connect to Netgear N150

    error message?
    pc OS bit version?
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • I have a Linksys Wrt54gs connected to a Cable modem. it w...

    i have a Linksys Wrt54gs connected to a Cable modem.
    it worked for about 8 months.
    My kid pressed a button by accident and now it won't work.
    the router just keeps resetting.
    i unplugged everything.
    conencted 1 computer, and everything is fine.
    Received DHCP address.
    Once i plug in a second computer it starts rebooting.
    Both computers are set to DHCP.
    NO internet connection is connected at this time for troubleshooting purposes.
    Nothing is connected to the ethernet port on the Linksys router (port for internet access), only 1 and 2 are connected.
    i reset the router and still nothing.
    i can connect 1 computer via wireless and 1 computer via direct connection and all is good. Once 2 devices are connected via direct connections it starts resetting.
    i can even connect the modem to the router (for internet access), and connect to the linksys router via wireless from my computer and get internet access.
    But once i direct connect 2 connections, the router starts resetting.
    i have reset and reboot it with every combination i can think of.

    Its good that its working now.
    If it happens again, try this :
    Press the reset button on the router for 30 seconds. The Power light will start flashing. Turn the Router and the Modem OFF. Turn the modem ON first, wait for 10 seconds, turn the router ON, wait for 10 seconds, you should be ONLINE !!!
    Do this when the computer os connected to the router with a cable.
    than on the computer open Internet Explorer and in the Address Bar type : 192.168.1.1 and hit enter.
    It'll ask for the password. The default password is admin.
    Once in the setup page. Click on the Wireless tab.
    In there Change the Network Mode to mixed. And change the SSID to your name.
    Change the Channel to 11. And Enable the SSID Broadcast.
    Save the settings here. After that Click on Wireless Security and configure it accordingly and Save the settrings.
    Than click on Advanced Wireless Settings. In there Disable the SES function.
    What is the firmware on the router ?
    Click here to see the updated list of firmware.
    For information on upgrading the firmware on the linksys routers :
    http://linksysfirmwares.googlepages.com/upgradingfirmware
    For information on wireless security :
    http://linksysfirmwares.googlepages.com/wirelesssecurity
    Message Edited by theonkar on 08-20-2008 04:48 AM
    C | EH
    linksyshelp.blogspot.com

  • Would like to print from laptop to printer at home. Printer is ethernet connected to NetGear Router

    HP PAvilion dv1000, Windows XP
    Would like to print from laptop to printer at home.  Printer is ethernet connected to NetGear Router.
    I had been able to print wirelessly from laptop to HP 7310 Officejet all-in-one, but now all I get is "document failed to print" message.  I can get documents to print on this printer using my smart phone, but not the laptop.
    I have used "find printer" button on print screen and can see the printer to select.
    Any suggestions?
    This question was solved.
    View Solution.

    Figured it out after looking at a few other posts...
    Configured port to printer IP Address and now it is printing perfectly.
    Thanks for having posts out there to review.

Maybe you are looking for