WRT54G - Desktop connects, wireless connections will not

I have a WRT54G router and until a few days ago it worked fine. My desktop connects to the internet, however the two wireless computers will not. I am also unable to connect to router via 192.168.1.1 on the desktop. Both wireless computer show a strong signal but do not connect to the internet. I checked the ip adress on one of the wireless computers and for some reason, it has aquired the router address (192.168.1.1). How can I fix this? I tired ipconfig/release and renew but it keeps using the same address.
Thank you in advance

As you mentioned in the post .... under wireless connection it show Ip 192.168.1.1 .... click start >> control panel >> network conection >> Wireless network connection properties ...
Go to Internet protocol TCP/IP .... check that is it showing Ip settingsunder Manul/Static or DHCP ....
If Manual then change it to Automatic Configuration DHCP .... click OK ...reboot the computer. ... Try to connect to new network ....
See if you are going online ....

Similar Messages

  • WRT54G ver.6 wireless router will not connect either way

    WRT5G ver.6 Router will not connect to the internet or other PCs wired nor wirelessly, PC shows "limited or No Connection".  The orange light is not on and will not come on when I press the Cisco System Light/Button on front.  I cannot access the router through the browser nor PING it through the command prompt.  I have tried to reset it and unplug it for few seconds, please, me OBIWAN, your my only hope.

    I think your router is bricked, You can try the steps on this link and check if it solves your problem or not.

  • My wireless keyboard will not connect to the Mac mini. I am unable to login to change settings. How can I bypass login?

    my Mac mini is password protected and my wireless keyboard will not connect.

    Troubleshooting wireless mouse and keyboard issues
    OS X: Bluetooth devices become unresponsive

  • Automatic update of RemoteApp and Desktop Connections does not work (while manual updates with "update now" is working)

    Hello,
    on several Windows 7 Clients the update/refresh of the RemoteApp and Desktop Connections stopped not working automatically. There is a Update failed error. When we do an "Update Now" manually, it gets synchronized without problems.
    I am asking me if there is an issue with a stored Password as we Need to Change the Passwords regularily. The error is occuring for Connections to all RDS Servers (we have severals).
    Does Windows store the user Password in the Task Scheduler? If yes, does the schedule Task Password Change automatically after the Domain Password Change?
    Or what else could be the issue? The RDS Server and the certificate (Name the same as the URL) seems to be fine as not all Clients have this issue.
    Thank you for your help

    Hi,
    Thank you for posting in Windows Server Forum.
    By default it will automatically update the RemoteApp and Desktop Connections but if in any particular case it’s not happening then for a try you can restart the server and check the result again.  In addition you can try running below command and check
    the result. 
    Start-Process rundll32 -ArgumentList "tsworkspace,TaskUpdateWorkspaces2
    More information:
    Powershell to update "RemoteApp and Desktop Connections"
    If a task is registered using the Administrators group for the security context of the task, then you must also make sure the Run with highest privileges check box is checked if you want to run the task. Please check “Task
    Security Context” for more details.
    Hope it helps!
    Thanks,
    Dharmesh

  • My itunes on a windows 7 pc with dsl connection will not connect with the itunes store

    my itunes on a windows 7 pc with dsl connection will not connect with the itunes store.  Any suggestions about why not or how to get it to connect?

    After reading the whole post, I still don't capture the exact error message or code from it when you failed to install Office 2013. 
    The only clue is that "bootstrap loader error" ...
    It seems that you want to upgrade Office 2007 to new Office 2013, by default, we could complete the uninstall previous Office version and install the new Office in the installation wizard.
    At this point, if you get the install source through CD or other media. I recommand that we copy/paste the installation to local drive. Then turn off all of anti-virus and firewall, begin to setup in
    Windows clean boot mode.
    Please use a setup log to troubleshoot setup problems in Office if the installation problem still occurs.
    http://support.microsoft.com/kb/826511/en-us
    Tony Chen
    TechNet Community Support

  • HT1338 Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Mac mini display connection will not come back after sleep, I have to shut down and restart the monitor.

    Finder icon on dock, macintosh hd, library, launch agent - delete all files & restart sleep to test
    also
    Finder icon on dock, macintosh hd,
    Library/Preferences/SystemConfiguration/com.apple.PowerManagement.plist
    delete file & restart sleep to test.

  • Wifi says unable to connect, will not connect to any connections.

    Wifi says unable to connect, will not connect to any connections. I cannot connect to any WiFi. Using iOS 6.0.1

    The links provided work for iPod and iPhone!
    Products Affected
    iPad, iPhone, iPod touch, iTunes
    You'll have to visit an Apple Store next to your place to get it looked at or contact Apple to get it serviced.
    Apple - Support - iPod - Repair pricing

  • My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all

    My iPhone 5 keeps on trying to connect the hotspot with wifi not connected. will not allow me to select hotspot at all. can anyone help am in Botswana an no apple store to help?

    I have the same problem, it's better trade my iPhone, or the apple it's gonna fix at the next upgrade? Please, someone help me, I try everything.

  • My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

    My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • BB Desktop Software 6.1 will not run on Windows 7 64-Bit

    I wrote to the forum of my problem, and a nice person here told me that I may be having the same problem as others and to repost my question to this link
    http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/BB-Desktop-Software-6-1-will-not-run-...
    I went there and cannot find a button to tick to post to that page, so I went one back and posted my problem in hopes of finding help. BB4matt even told me what my laptop is.  A Genuine Windows 7 home Premium 64 bit Operating System, and that Desktop 6.1 will not run on this system, to copy my problen to the above link, (which I couldn't figure out how to do) or start a new one under the heading I used, that I MIGHT attract a guru of sorts, BB Tech Advisor, ViciousFerret. MR FERRET, please help!
    Thank you all so much in advance once again! (Below is my original plea for help.)
    P  
    Hi. 
    I have read in these forums and am still lost.  I know my answer should be in hre somewhere, but if it is I am unable to understand it, so be patient as I may be reasking an already answered question.
    I try to be a good lil girl and follow forum rules, but am lost here.
    I bought a new laptop, a Dell 17R  It runs Win 7 I think. Lots of ROM/RAM.  I dowloaded the desktop program from bb dot com and cannot get it to work.  First it asked me to trouble shoot, and reconfigured the DT prog for Win XP.
    It then acknowledged my Torch and dld my photos.  Then it decided I didn't have space and undid whatever it did.
    NOW I cannot get the program, once it opens to recognise my phone at all! ACK!!
    I need someone who understands this gobbltygook to explain to me what to do.  I need to unload my photos, as I use my phone to take pix more than I would have thought.
    I am a photog, and it's better than my first digital this Torch 9800 is, and video quality, OMG, but the vids are too big to upload from the phone..........(IDK why cuz it did at Christmas?)
    Anyway, please help me here, as I can use a computer, e-mail, Facebook, Picassa, other than that, IDK too much about them.  (It took my YEARS to spring for this laptop)
    Thank you in advance for your patience.
    P  

    I have the same issue.  It gets to a desktop manager picture and just freezes.

  • Wireless key will not work

    I just moved my mac mini to my new apartment and my wireless keyboard will not work. My man mini model is A1103. The problem is that I need to type in a password to get on my mac to get to the bluetooth config screen. So I'm stuck at the login screen with a keyboard that just blinks. Its also my TV so im goin nuts. PLZ help.

    If you know someone with an USB keyboard, borrow it and use it to input the password. It doesn't need to have been made by Apple or designed to be used with a Mac.
    (50804)

  • Just installed Safari on PC.  MS wireless mouse will not scroll on most pages; will scroll on history section of homepage.  Any explanation?

    Just installed Safari on Sony PC.  MS wireless mouse will not scroll on most pages.  But will on "History" section of homepage.  Help appreciated.

    Panic over. I tunes now appears to be working normally.

  • Wireless mouse will not work at the top of the page on ANY website while running Firefox 7.0.1

    I am currently running Firefox 7.0.1 and have not had many problems until today. I have noticed that my wireless mouse will not work at the top of any website. This means I cannot log into many sites. I have also noticed that during page downloads, I have to move the mouse in order for the page to load or it just pauses. Any help would be appreciated!

    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    Se also:
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • WRT300n wireless G will not connect.

    Any ideas. I gad a wrt54g and had no problems. I updated to the new wrt300n and my laptops will not connect.

    Follow this setting on N standard router ......
    Open routers set up page .....
    Click wireless .......
    1)  Radio Band - 40Mhz
    2)  Wide Channel - 6
    3)  Standard Channel - 9

Maybe you are looking for