WRT54G ethernet cable not being recognized with ps2
As of yesterday I had no problems with my wireless router
but this morning there was a bad thunderstorm
and now when I go to connect to the internet through it
it says "Connection failure! The network cable is disconnected."
but if I wait about thirty seconds the router
says I have a connection and it works fine
I know its not that big of a problem but it is a bit annoying
any suggestions?
try changing the ethernet cable
open the NIC's properties and reduce the link speed to 10 Mbps half mode .
Similar Messages
-
Iphone 4 not being recognized with the extension cable
My Iphone 4 is not being recognized with the Apple extension cable in my new Nissan Juke so the phone has to be kept in the glovebox due to the very short cable Nissan provides. This is frustrating since the phone gets noticeably worse reception in the glovebox. Does anyone know of a fix for this so I can run a longer cable extension and run the phone out of the glovebox? Mabye a different extension cable or longer cable that works with Nissan's set up?
I don't think it is the cable. I have tried plugging the cable into the USB cable that came with the phone and the extension cable works fine with it. I guess this really is just some screwy stuff with Nissan.
-
IPod Not being recognized with all the software updates
I've been without my iPod for a few weeks now and I desperately want it back. I dropped it a while back, and have come online to look up stuff to restore it, but none of that is working for me. I reset it by pressing "menu" and "Play" at the same time, then put it into disk mode by pressing the "ff" and "rwd" buttons together, but even in disk mode my computer is not recognizing it at all. The iPod screen says that it is in disk mode, and says it's okay to disconnect, but its not giving me the option to restore when I connect it to my computer and open the iPod updater.
It also gives me the file folder w/ an exclamation point whenever i don't put it into disk mode. And the few times that my computer does pick up something the iPod updater flashes a message that says "Can't Mount iPod" and then the updater manually closes itself. Anyone know what to do?
Thanks
20GB with Dock Connector Windows XPFor "Cant mount iPod" - please try the following first
Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If still cant solve it then
The Sad iPods icon, clicking sound or folder with an exclamation mark are the toughest problems to deal with, and must do a Restore in order to fix it. However, when your iPod is showing this icon, it is probably too late for your computer to recognize the iPod.
1. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
2. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
Still can't see your iPod?
Several things could keep iPod from appearing in iTunes or in the Desktop/Finder when you connect it to your PC/Mac. The most likely causes are listed below in logical order. Check from the top of the list to see if that is what's keeping iPod from appearing.
3. Try to wait 30 minutes while iPod is charging.
4. Try another known-good FireWire or USB through Dock Connector cable.
5. Try another known-good FireWire or USB port on your computer .
6. Try to disconnect all devices from your computer's FireWire and USB ports.
7. Windows users having trouble with their iPods should locate a Mac user. We've found that in many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
There are also some cases being reported that some unrecognized iPod being able to be erased with Linux, then reconnect the iPod with the original computer and do a Restore there.
8. Try to do an Erase (Disk Utility) on a Mac computer or a format with a PC (Disk Management tool) but ensure you choose the right Drive (your iPod not your Hard Disk of your computer). You may need to plug and unplug your iPod with the computer for several attempts, and switching around Format and Restore, and hope out of sudden, it will get recognized.
9. Diagnostic mode solution – which I copied from a thread of a post from thinktwice
“Then I cam across this special Diganostics Mode that you can get to by resetting and then while the Apple is showing pressing the Select and backwards keys simultaneously. It bring up and weird Diagnostic utility witha a abunch of tests. Here is what I did
- I tried the 5in1 test and got and error on Firewire.
- I did the HDD R/W and surprisingly it passed.
- I went on to the HDD scan. This supposedly tkaes acouple of minute so I waited. I think 4-5 dots appeared then nothing. The iPod started to get hot. THe disk was spinning away. After a while the battery got very low. THis test chews up the battery. So I escaped out by resetting and went to connect it to a power source.
My USB was dangling out of my computer and I was too lazy to get the Firewire AC adapter thing going so I connected expecting the whole lockup thing with iTunes. Surprise. IT was recognized immediately and has been working like a champ. So go figure.
Details on Diag mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/index.shtml
10. Let me ask you a question, if an iPod with no iPod software with it. When your connect it with a computer, what would happen?
Yeah, the computer will treat it as a fresh external hard disk, which will get force mounted, the computer will ask you to format the iPod. It does not really matter the format is completed or not, the key is to erase (or partly) the corrupted iPod software on the iPod, after that the computer will recognize it.
Once it has been completed, eject your iPod, open the iPod updater and interestingly, you will able to do the Restore this time.
Base on the above, that's why I suggest Windows users who experience trouble with their iPods should locate a Mac machine or vice versa. PC computer will not recognize a Mac formatted iPod, but it will get mounted in an attempt to format your iPod.
11. Put your iPod in disk mode and plug with a computer, and have a boot of your computer using the Mac OS or XP startup disks, hope that your iPod will be seen on Mac's Disk utility and allow you to do a Erase there. Or, under the XP, you will be able to find your iPod there for you to do a Restore.
But, if none of these steps address the issue, your iPod may need to be repaired. You can arrange for service at the iPod Service Website.
I have just read an interesting solution about the Sad iPod, it does make sense but the warranty will be waived once you open the iPod, I would not do it myself as I am not good on doing this
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Pictures and instructions of how to open the iPod case for battery replacement
http://www.kokopellimusic.us/KM_instructions.htm -
Apple USB keyboard is not being recognized with my iMac, what do I do?
When I startup my computer I am prompted with the 'there isn't a keyboard connected' message. I'm using an apple wired USB keyboard, it was working perfectly fine yesterday and it appears to still be operational as I can charge my iPhone from it.
I've tried restarting, using different ports, removing other USB devices, but haven't had any luck. I can only access my guest account as my main is password protected.
I don't know what to do, can someone please help?
Thanksbelle_south wrote.
I've never discovered why my bluetooth and wifi
turn on by themselves. I suspect sometimes that
the cats have something to do with it.
Ha Ha Ha
-
I just installed a wireless cable modem for a desktop PC and my MacBook Pro; After installing, I changed the password on the wireless connection at the PC but it is not being recognized by Airport as the new password. Can anyone help?
Hi twinkytomes,
Welcome to the Support Communities!
The article below may be able to help you with this.
AirPort Utility 6.x: Password-protect your wireless network
http://support.apple.com/kb/PH5119
Cheers,
- Judy -
I recently upgraded to iTunes 11.1.5 and now my iPod Nano is not recognized in iTunes. I also upgraded my iPhone 5s to iOS 7.1. i Tunes on my computer does recognize my iPhone. What is the problem with my iPod Nano not being recognized?
I would think, Twins1995, that if we are having the problem, others are as well. Hopefully, Apple will shortly issue a follow-up software release to fix the problem. Or is that just wishful thinking on my part.
It would be helpful, if there were some kind of work-around in the interim, so we can use our devices. Pretty frustrating when you consider that all of the hardware and software is produced by Apple. -
Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!
Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.
-
IPod Composite AV cable is not being recognized
Hey there,
I bought an "Networx iPod Composite AV cable" (for Ipod touch 2G) at a Gravis store (certified retailer).
Now, ever since I bought the new software (3.0) and updated Itunes to 9.x this cable will only allow me to to charge the Ipod, however it is not being recognized in Itunes.
I have read that some cables do not contain a specific chip that authorizes the connection between the Ipod and Itunes. However, before I paid for the software update, it was still working and when buying the update Apple did not provide any information about third party cables (which comes from a certified reseller) not being supported anymore.
Is there a way of fixing this? I have already reset the Ipod, yet that did not change anything.
Do I need to jailbreak it to make it work?
Thanks.I'm comfused - isn't a Composite AV cable for conecting your ipod to a TV - not Itunes?
-
iPhone not being recognized and cannot be activated for service--what does this mean? I can't sync with iTunes. Please help.
When I connect iPhone to USB iTunes is giving me the above message. Please advise if you know the fix.
Thanks,
Lina1116did you find a fix?
-
My iPhone 5 is not being recognized by my iMac. All my other devices, including iPod and iPad are recognized with no sync problems. I've tried every approach with online help as well as an Apple advisor by phone. Help? Any other suggestions other than going to an Apple Store?
Back to life**
Oh I know there are many other vocabulary mistakes but never mind them I was just too excited when I wrote all of that while typing very quickly
P.S: if you have any question then ask and please do tell me if it works or not with u but I'm definitely sure it'll work so tell me this and we'll get excited together
Also if you have an experience to share then do share it as well please.
Peace -
My Iphone 5c is not being recognized by my Mac computer. I have done all of the upates, restarted several times and I'm not sure what else to do. I have searched and searched and searched and have come up with nothing. Also, my Iphoto can not be updated. I'm still using version 8. something, and it won't update without this update and that update. It needs 9.0 but I can't find that download anywhere. The only one that I can find is 9.1. That won't update. Is there anything that I can do, or should I just bite it and take it to apple to get looked at?
Does iTunes not see the phone?
If not, make sure you're running the current version of iTunes.
If you are running the current version and it still doesn't recognize it, see this: http://support.apple.com/kb/TS1591?viewlocale=en_US&locale=en_US
As for iPhoto, you will have to purchase a newer version. It's not a free upgrade. Or, you can use Image Capture, which is built into OS X, to import the photos. -
Some CD's with music burned to it, are not being recognized as having music files on them.
Some CD's with music burned to it, are not being recognized as having music files on them.
The format says Mac OS Extended. All of the settings were set during the disk image restore process. Even if I format the flash drive as extended journaled or some other format, all of these settings are reverted when I do the restore from the disk image. I will just copy all of the information that disk utility has so that you can see it.
Mount Point : /Volumes/Mac OS X Install ESD Capacity : 16.11 GB (16,106,110,976 Bytes) Format : Mac OS Extended Available : 12.3 GB (12,303,499,264 Bytes) Owners Enabled : Yes Used : 3.8 GB (3,802,611,712 Bytes) Number of Folders : 128 Number of Files : 876 -
why cant i sync my devices with this new version of iTunes? my devices are suddenly not being recognized. HELP!
Connect your iPod, iPhone, or iPad to your computer and select your device.
-
I have been trying to remove all residual apple files from my computer in order to fully reinstall iTunes. My devices are not being recognized by iTunes currently. I keep finding an Apple file under C/: Program files/ common files/ ......Apple.. under that there is an Internet Services file folder.. I am the administrator and yet it says I need permission to remove these files.
Please advise.See Troubleshooting issues with iTunes for Windows updates for some tips on cleaning up... Unlocker might be the tool in this case.
tt2
Maybe you are looking for
-
Asking specific client certificate (not certificates trusted by authority)
As I understand from what I read so far, during the handshake negotiation for two way ssl, the server sends the client a list of trusted certificate authorities and say to the client: "hey, those are the authorities I trust. send me a certificate tha
-
Desktop 1 not showing image in Spaces
Spaces is working fine and there is no problem. However when I do SWIPE THREE FINGERS DOWN (Exposé), for some reasons all the SPACES windows at the top of the screen show the relevant small app windows in each space except DESKTOP 1. DESKTOP 1 is bla
-
Show volume size in Lion? Snow Leopard showed the amount of space available on mounted volumes in the Finder. I can't find how to do that in Lion. Get Info works, but I'd like to see available space when I open a drive or volume/
-
Call transformation and Euro sign
In an XML file i got a Euro sign u20AC. But after transformation i haven't got it ???!! This is my code DATA: W_RESULT TYPE XSTRING. " UTF-8 CALL METHOD CL_HTTP_CLIENT=>CREATE_BY_URL EXPORTING URL = W_
-
Has anyone out there created .pdf files using Windows 7 and would like to share their experience. I ask because several of the online printers are specifically not accepting .pdf files output from Pages, but are accepting PC files. Things to check fo