WRT54G Firmware Question and Another Question If You Can Help...
What do i do with the Firmware? I downloaded it to my computer and i dont know what to do next Can someone help?
Also, When I try using the wireless router, the green bars are full but i cannot connect to the interet.
Oh, and one more thing. When i plug everything into the Router the Power button and the WLAN lights stay on, but the Ehternet and Internet lights flash. Is this suppose to happen?
If you have any ideas or suggestiosn, i am open minded THANKS!
Message Edited by Celibonk89 on 06-21-2007 11:09 AM
well you need to logon router's setup page, open I.E. and inthe address bar type 192.168.1.1, it would ask for username and password, put "admin"(default password) of router... go to administration tab >> firmware upgrade >> browse for firmware file and upgrade it, reset the router and reconfigure it according to ISP settings...
ethernet and wireless lights are blinking staht indicates router is communicating withe wired connection as well wireless connection.
Similar Messages
-
hello there, this is really urgent i would like to ask if there is a way to deactivate/lock my Mini Ipad because it was stolen, i hope you can provide me a way to do so, thank you for the support and i really hop you can help me, i bought this mini ipad not too long ago.
Unless you enabled Find My iPad on it before it was stolen then there isn't any way to locate it. If you did enable it then you could try locating and/or remotely wiping it either via http://icloud.com on a computer or Find My iPhone on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPad disabled on it.
If you haven't already done so then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model you should also contact your carrier. -
Ordered the Airport Extreme Base Station - some questions if you can help?
I have a Windows 7 Home Premium 64 bit IBM ThinkPad T500 laptop I need to connect, and a Windows Vista PC. The ThinkPad has a built-in wirless N card and the Vista has a Belkin N+ USB wireless adapter. Can these both find and connect to the Airport without me installing any software (Bonjour etc) on them?
Since they are using the N+ wireless cards, will they connect to the Airport at 2GHZ or 5GHZ speed? If they can connect at either speed, what controls that?
I also have a MACPro desktop. I was hoping to configure my airport using it and hoped not to have to worry about configuring the other 2 pcs.
My old router was a Belkin n+ 2GHz router. Could I use that router as a repeater with the Airport. How can I do that?
Thanks for any help on these questions.Welcome to the discussions, Michael!
I can't help on your Windows / PC related questions, but can offer some input on the last two questions.
+"I also have a MACPro desktop. I was hoping to configure my airport using it and hoped not to have to worry about configuring the other 2 pcs."+
You will use AirPort Utility to configure the AirPort Extreme. It should already be on your Mac. Check Hard Drive > Applications > Utilties > AirPort Utility. This will also come on the installation CD.
+"My old router was a Belkin n+ 2GHz router. Could I use that router as a repeater with the Airport. How can I do that?"+
In order to "extend" a wireless network created by the AirPort Extreme(n), you would need another AirPort Extreme, an AirPort Express, or a Time Capsule. The Belkin would not be compatible with an Apple base station for this purpose.
If you connected an ethernet cable from the AirPort Extreme or used a pair of ethernet powerline adapters, then you could possibly configure the Belkin to create a wireless network, but unless it was 5 GHz capable, you would not be able to mimic the 5 GHz "main" network that the Extreme would be creating. -
Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer? -
Hello, I wonder if you can help me. My iphone will not restore. iphone prompted restore in itunes I have downloaded all available Apple downloads and the iphone software and firmware restore was almost complete when the message similar to 'iphone restore failed' appeared. I cannot make or receive call
Hi, Mangy1.
Thank you for using Apple Support Communities.
Here is the best resource when experiencing issues restoring your iPhone.
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If the issue still persists, please reply back with the exact error message received.
Cheers,
Jason H. -
Morning all. Hope you can help. Basic question for a newbie.
Is there anyway I can check if a form is in QUERY_ONLY mode??
Basically I have a button and I want it to do different things depending on if the form is query only or not.
Really hope you can help me...
thanks alot...
BenWhoa. After looking at that I'm still confused.
We have a form on our system that can be called in 2 different ways. Calling the form normally and calling it in Query only mode depending on the user roles.
The form we are calling can then call about 10 other forms. However we want it so that one particular form can't be accessed in query only mode but can be accessed in normal mode.
I'm thinking about just setting a global when calling the main form depending on if it's in query only mode or not. Then checking the global when trying to call to subsequant form, if the global is set to "QUERY_ONLY" then give an error message telling the user is not allowed to view the form or running the form it the global is set to "NORMAL". But didn't know if there was a better way to do it or not. -
Hi,
I'm looking for a online private tutor for teaching me Adobe Premiere Elements 8 through remote cessions and Skype.
Willing to pay a good price for good tuition!
Please contact me asap if you can help.
Thanks,
J SussholzJacqui,
I stongly believe that Steve has given you the best advice. Actually, it's the same advice that I would have given you, if I had seen your post first!
I can verify that his books will give you more info, and in a more usable form, than tutoring, or even in-class, hands-on schooling will. Almost anything that can be done with the program (he also has a companion book for Photoshop Elements, which is often bundled with PrE) is covered in easy to understand detail.
After reading through, and working along, his second bit of advice, Muvipix, is also sound. Between this, and Muvipix fora (Community tab), there have been very few questions that could not be answered. Muvipix also is a great resource for additional articles on how things are done, plus tutorials.
I also recommend that one take an hour and read through both the FAQ and Tips & Tricks articles, found to the right of the PrE forum main page. I would read Steve's book first, so terms, etc. would be most clear.
There are two on-line training sites, that get great reviews: www.lynda.com and www.ltotaltraining.com. I have not subscribed to either, but have used the materials furnished from them with various Adobe programs. I also have several of the lynda.com books on various programs, and they are well-written. Now, they are NOT one-on-one tutoring, which is what you are looking for. They also probably do not cover PrElements, but that is just my guess. If they do, they would be another good source of training, though it's through tutorials, and not direct instruction.
This is just my 02¢'s worth of thought.
Good luck,
Hunt -
I did a restore on my Imac and now it says You can’t open your current photo library using this version of iPhoto.So when I go to apps icon they want to charge me 14.99 for new Iphoto
It would help if you would answer questions and give information rather then constantlhy complaining
You do not need to purchase anything - but to help you you do have to supply the requested information
Have you installed iPhoto from the DVD that came with the computer or from the App Store?
The answer to this is critical to helping you -- please answer
WE probably also need to know exactly how you "restored" your Mac and why youneeded to restore it
LN -
Icloud delete all my files on page, numbers and keynote. Could you please help me?
I`m trying open my files on icloud but i can't see it. The pages show me a groups files without files on icloud.
Hello muss29,
Thank you for the question. You can change the email address you use for your Apple ID by signing into appleid.apple.com. Use the steps in the following article:
Apple ID: Changing your Apple ID
http://support.apple.com/kb/ht5621
Once you have updated your Apple ID to the correct email address online, you need to update the services that use your Apple ID with the updated email address. The following article will give you steps for various services like the iTunes & App Stores and iCloud:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
If you are still seeing your old email address when trying to sign out of iCloud, use the steps in this article:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Thank you for using Apple Support Communities.
Best,
Sheila M. -
I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps. -
I attempted to open iPhoto and got this message: you can't open the application because it may be damaged or incomplete. Now the iPhoto icon has a little line through it.
Nice. Shall I say goodbye to my treasured iPhoto library? What happened?
I did just upgrade my iPhone to OS 5. Could that be related somehow?
Help!1. Back up your iPhoto Library - you should always have a back up anyway.
Most Simple Back Up
Drag the iPhoto Library from your Pictures Folder to another Disk. This will make a copy on that disk.
Slightly more complex:
Use an app that will do incremental back ups. This is a very good way to work. The first time you run the back up the app will make a complete copy of the Library. Thereafter it will update the back up with the changes you have made. That makes subsequent back ups much faster. Many of these apps also have scheduling capabilities: So set it up and it will do the back up automatically. Examples of such apps: Chronosync or DejaVu . But are many others. Search on MacUpdate
2. Reinstall
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store you can find it in your Purchases List. -
can you see which apps are open and/or running (like you can on an android phone by going to settings>applications>running services)?
Hi wjosten,
thank you for the help. I should have said I had a iphone 3. A friend has the same phone and she showed me how she can see what web pages are open when she double taps the home button. Mine is set to bring up favourites when I double tap (chosen from settings>general>home button).. BUT my choices are only HOME; SEARCH; PHONE FAVORITES; CAMERA or IPOD. I changed my choice to HOME but that just defeats the purpose as when I am at the home page and double tap nothing happens. Am I making sense? -
In Options --> General --> I want the option to "Show my windows and tabs from last time" '''''AND''''' "Show my homepage", but that choice isn't given. When I open a new tab, I'd like to see my iGoogle page, not a blank screen. Hope you can help. D
You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/ -
Hey , why always when i want to update my Ipad to ios 6.1.3 at the end tills me that the update was failed , its always ,please if you can help me, and thank you.
Try disabling your firewall and antivirus software and see if that helps - if you are trying to update using iTunes on your computer.
-
I hope you can help me. I purchased adobe captivate 8 on line and when I click on the email link to download, it comes up with 7 programs, some are 64 bit and some are not, my computer is 32 bit. I am not sure which of these 7 to download? All or just the 4 non 64 bit?
I tracked down the problem with the download and installation, my windows 7 was missing a file and after reinstalling windows everything worked out. The first 32 bit program in their list was used. I hope this can help others.
Maybe you are looking for
-
Safari quit unexpectedly while using the SystemConfiguration plug-in
Hi everyone, When I try to launch Safari, I get this message: Safari quit unexpectedly while using the SystemConfiguration plug-in. Any idea how to solve this problem? Thanks so much! Below is all relevant information: Process: Safari [5745]
-
I want to update my Ipod Touch 4th Generation with the 5.0 version, but it says, "Updating it to iOS 5 will delete all of the media, including Itunes store purchases, on your Ipod Touch. To preserve this content, apply this update on the computer whe
-
Hello I'm trying to convert an bmp-File into a 2-d array which should conatin the values of each pixel. I created this VI but it doesn't work. Could somebody tell me why not? Thanks Simon PS: I succesfull created the opposite. A VI which creates a bm
-
Computer will (now) only download HD versions of TV series
Greetings. We purchased a season pass to a TV series via our MacBook Pro laptop. Was downloading both HD and standard versions (as it should). Mid-season, discovered ability to download series to home computer (an iMac) while my wife was at a confere
-
Moving Data from old Mac to New Mac
I just bought a new Mac Book Pro and I have a two year old Mac Book Pro. How can I easily move all the data and applications over to the new Mac?