WRT54G for computer internet gaming

I just bought a RC aircraft game that has a multiplayer online game mode. I have to use a Static IP address and have a port range between 61234 and 61241. Simple enough I guess, if you know what you"re doing.
Here are the prolbems I am running into.
1. because I use linksys security and have a password I had to push the reset button on the back of the router to be able to type admin and access the online set up. which was no big deal but if I knew how to do it useing my passwod it would be nice.
2. After I made it to the set-up sight I went to settings and choose Static IPaddress. I had to make up a number for the static DNS so don't know if I did that right. I choose save settings.
3. I then went to gaming where the ipaddress is listed about 6 times or so and you can choose to assign a port so that's what I did but everytime I would do that and go back to look it was not checked and it seemed the changes were not applied.
4. after all that the two other wireless computers in the house would not connect to the internet, they did connet to linksys, but no internet connection so I ended up pushing the routed reset button again and putting things back the way they were.
Could some one help me get set up and do what I have to do to keep internet connection with my other two computers?
I would have gotten a ps3 if the game I wanted was made for it. I also want a multiplayer car race game.

Who is your ISP...?If your ISP is DSL then,you have to convert the modem into the bridge mode fist.
After resetting the router,first of all configure the router as per the ISP settings...then,Change the SSID name to some unique name.Now,you can open the ports under port forwarding tab...Check this link.

Similar Messages

I just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

i just had a new hard drive installed. After loading everything back on my computer from external drive, i came to the "select wireless network screen. I've misplaced the WEP password for my internet. Is there anyway to find it on another computer?

Maybe. What kind of other computer are you talking about? What operating system is it running? What kind of wireless router are you using?
Your best bet may be to just reset the router and set it up again.
Just so you know, WEP is a very old security system for wireless and is considered insecure. If you have it available, use WPA2.

HT1491 Is there a way to download onto ipod without Wi-Fi, for example, computer internet?

Is there a way to download onto ipod without Wi-Fi, for example, computer internet?

Sync from your computer
iTunes: Syncing media content to iOS devices and iPod

How to use iBook for sharing internet via airport card... can it be done?

The title says most of it all. I want to share the internet coming from the wall through the airport card in my iBook. I've made it work, however I'm concerned about doing it securely. Can it be done securely? If so, how? I've read in the help files about using the firewalls and such, but I'm having trouble making heads or tails out of it all. How about a primer on basic wifi security in the iBook's Airport card environment? I'm not as savvy as I used to be! Thanks in advance for your help.

ride a bike:
Requirements for wireless Internet access
To use AirPort to access the Internet wirelessly using Mac OS X, you need:
An Apple AirPort Card, AirPort Extreme Card, or a compatible third-party wireless card
An AirPort Base Station, Time Capsule, AirPort Express, or an AirPort-enabled computer acting as a software base station (if you are hosting an AirPort wireless network)
Internet access
Some Internet service providers (ISPs) are not currently compatible with AirPort.
If you’re setting up an AirPort Base Station, Time Capsule, or AirPort Express to connect to the Internet, you need an account with an ISP. When you set up your account with your ISP, you were most likely given account information (such as user or account name, password, phone number, and possibly other information). Have this information ready when you set up your device.
If you are connecting your base station to an Ethernet network that already has an Internet connection, you may need an account name and password to access the network. Check with the network administrator if you’re not sure.
(From the Help Menu)
Please post back with further questions or comments.
cornelius

When I attempt to download the lastest OS iPhone update to iTunes, the file is too large for my internet carrier will allow. My max is 400 MB and the file is what about 583 MB? Options? The same is true for the iTunes updates.

When I attempt to download the lastest version of the iphone 4 OS update or the itunes one for the desktop, the file is too large for my internet carrier. It will allow only a 400 MB download versus the download size of 583 MB. Suggestions?

You can download on your work computer, then place the file on your desktop of your home computer, if you want. Then:
Launch iTunes
Option+Click (Mac OS X) or Shift+Click (Windows) the Update button
Select the IPSW update file you just placed on your desktop
Let iTunes update your hardware to the latest version
The .ipsw file is located here:
Windows XP: \Documents and Settings\username\Application Data\Apple Computer\iTunes\iPhone Software Updates
Windows Vista & Windows 7: \Users\username\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
You will have to turn on "Show All Hidden Files & Folders" to see it.

TS2756 How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

How can i create a new usb connection (service) on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
but not the usb iPhone i used to have.
And when i try to add a new one i dont get a USB option.
can some one help me please??
this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets. Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router. I currently have a Verizon FiOS router. I have Verizon for phone, internet and TV. However, TV-wise, I just have a basic service for one TV with just a regular box. No HD, no DVR. Don't need access to a menu, widgets, on-demand. Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here. The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area. But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet.

Hi, I'm using a Mac Pro here. I am trying to connect it with my NAS hard drive. But i could not connect to it because i have an ethernet which connects to the intranet in my company and Air Port for the internet and it could not detect the the ip address after i input the correct address on "Connect to Server" window. Please help! Urgent! Thanks

I did not say it is not possible.
I said if your company networks are monopolizing both ports, you should talk to them about what options are available.
Maybe you can get the company Intranet over wireless if you change some configuration items such as Subnet Mask.
Maybe you can get on the Internet over Ethernet.
You really need to ask them, and do not let them blow you off because you have a Mac. If they balk, ask them how it would be done on a PC (becasue it will be the same on a Mac).

How do I get Firefox to open when I dial up to connect to the internet, instead of internet explorer for the internet service provider?

I have a dial up connection for the internet through Netzero.com, and when I click on it to dial up to the internet, it brings up the Netzero home page on Internet Explorer. I've changed my default home page from Internet Explorer, to Firefox, but when the internet is connected, Internet Explorer is the one that brings up the Netzero home page, not Firefox, so I have to click on the icon for Firefox, and then it opens, with Netzero home page on it, so I have to go through 2 different processes to get to use Firefox. I downloaded Firefox because it's suppose to be faster that Internet Explorer, especially since Internet Explorer keeps not responding when I'm in the middle of doing something. So I thought I'd try Firefox, but it doesn't seem to be faster than Internet Explorer, since the ISP that I have has a web accelerator, but it doesn't work on Firefox for some reason, I can see on a meter on my desktop when it's accelerating, and Firefox doesn't accelerate ever, if I change over to Internet Explorer, I can see the meter accelerating the web page. Hope you can help me with this problem, as I like Firefox. Thank you very much.

Try changing firefox to the default browser: [http://kb.mozillazine.org/Setting_Your_Default_Browser]. That will probably get firefox to open when you dial up.
I'm not sure what you mean by "the meter accelerating the web page". Can you explain that?
Thank you

Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

Just downloaded the new OS for IPhone. Despise the appearance. It has jacked with the way I like things in some unacceptable ways. Is there any way to keep the OS, but return to the old appearance? Important to know BEFORE I download OS for computer.

I know I am responding to my own thread, but I an SOOOO disgusted with Apple right now.
The new iOS 7 was the lead story on CNN today... and it wasn't positive. Easy to see why, it's a graphics disaster. It is ugly, difficult to read, doesn't interface aesthetically with the iPhone 4S, and gives everyone in America vertigo. Either fix the appearance, or find some way to allow us to roll back to our previous iOS. Do so quickly, or this life-long Apple customer [circa 1978] will be moving on. If this represents shades of what is coming with OS Maverick, I am petrified. Further, I am a GM of a chain of newspapers and websites in the Austin, Texas area. I will be ripping out a scathing editorial. The notion that we can't roll back from something millions of us hate is despicable. I'm giving you one week. Be sure I am not alone.

Port forwarding for the Web server for outside Internet (not working , help!!!!!!)

Hello
I am trying to learn something new here. We have web server inside our organization its IP address is 172.16.0.35. We want outside Internet users to access web server, How is it possible? Please have a look at the running configuration. Web server is working inside the organization but not at outside. Our Static Public IP is 197.255.232.15 it is assigned to Inetrface Gigabit ATM0.1 and ISP default GW is 197.255.232.1. Let me know whats next? How do I make web server inside the organization available for outside Internet users. Thank you.
Building configuration.
Current configuration : 1983 bytes
! Last configuration change at 17:57:15 UTC Sat Jan 24 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router_test
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool test
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
ip access-group netin in
ip access-group netout out
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly in
atm route-bridged ip
bridge-group 1
bridge-group 1 spanning-disabled
pvc 0/35
encapsulation aal5snap
protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description Lan
ip address 172.16.0.34 255.255.255.224
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1454
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
login
transport input all
end
http://pastie.org/9858814

Hi Karsten Iwen
I deleted ( ip access-group netin in and ip access-group netout out) but it still does not work
my config :
Building configuration...
Current configuration : 2267 bytes
! Last configuration change at 15:43:06 UTC Wed Jan 28 2015
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname router
boot-start-marker
boot-end-marker
no aaa new-model
memory-size iomem 10
ip dhcp excluded-address 172.16.0.34
ip dhcp pool my
network 172.16.0.32 255.255.255.224
dns-server 197.255.224.18 197.255.224.66
default-router 172.16.0.34
lease 9
ip cef
no ipv6 cef
license udi pid CISCO887VA-K9 sn FGL1818236L
controller VDSL 0
interface Ethernet0
no ip address
shutdown
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description ATM Routed Bridge Encapsulation (RBE) Internet
ip address 197.255.232.15 255.255.248.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
no ip virtual-reassembly in
atm route-bridged ip
pvc 0/35
encapsulation aal5snap
no protocol ip inarp
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
description
ip address 172.16.0.34 255.255.255.224
ip nat inside
no ip virtual-reassembly in
ip tcp adjust-mss 1414
interface Dialer1
no ip address
ip default-gateway 197.255.232.1
ip forward-protocol nd
no ip http server
no ip http secure-server
ip nat inside source list natlist interface ATM0.1 overload
ip nat inside source static tcp 172.16.0.35 443 197.255.232.15 443 extendable
ip route 0.0.0.0 0.0.0.0 ATM0.1 197.255.232.1
ip access-list extended natlist
permit ip 172.16.0.32 0.0.0.31 any
line con 0
no modem enable
line aux 0
line vty 0 4
end
Router#sh ip nat translations
Pro Inside global Inside local Outside local Outside global
tcp 197.255.232.15:5183 172.16.0.33:5183 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5196 172.16.0.33:5196 212.95.74.5:80 212.95.74.5:80
tcp 197.255.232.15:5602 172.16.0.33:5602 174.129.246.27:80 174.129.246.27:80
tcp 197.255.232.15:5785 172.16.0.33:5785 31.13.93.3:443 31.13.93.3:443
tcp 197.255.232.15:443 172.16.0.35:443 --- ---

What are the settings in i phone 4s for connecting internet in mobile data ?

what are the settings in i phone 4s for connecting internet in mobile data ?

Did you ever get a reply to this. I have the same problem. I have the same problem when even when I reply to an email... no photo shows up in my new reply message. The only way I have figured out is to use the "forward" option.
But this still does not solve the problem when people email me back... I have no idea what photo they are speaking of. Instead of a photo... there is a <photo name of some sort>.
Let me know if you ever hear on this one.
Many thanks.

Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

After getting message below iTunes will not open- just disappears off screen.
Had to delete iTunes for computer repair. Downloaded new version 10. Would not open -Message: "iTunes Library.itl cannot be read because it was created by a newer version of iTunes"

Unless you've recently attempted to downgrade iTunes this is probably a sign of a corrupt library file. See Empty/corrupt library after upgrade/crash.
tt2

Need help for connecting internet in solaris 10

Hello ,
I am new to Sunsolaris, recently i installed solaris 10 in my HP laptop. In my lap vista is the host and i installed Virtual box 3.0. Inside virtual box i installed solaris. My problem is not able to connect to internet. Iam using a wireless modem for connecting internet which is configured in vista. Solaris is not identifying wireless modem. Virtual box host adaptor is the ethernet iam using. I want to connect solaris to vista and access the internet( i have a guest open suse Linux in my lap, this is able to connect to internet through vista) can anybody give me a solution to get internet in solaris(ie through vista)
Biju

Hi,
What is the gateway used by Solaris. Please send the result of ifconfig -a on the Sun OS.
Sunil.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials. And I say this because it's what I would do, there are a lot of tutorials online. Hope you can find good use for them. Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy. I've re-purposed a mac color classic and LOVE IT!!

WRT54G for computer internet gaming

Similar Messages

Maybe you are looking for