WRT54G General problems with this model

Has anyone else seem to find that WRT5G4 Routers always seem to be having problems? Im having a problem ( I think I fixed it though thanks you to guys) My friend always has a problem with it not dialing though his PPP0e. And both my neighbours have a problem with it droping the signal. Or maybe I have had bad luck with them.

i have had problems with this one too. it keeps dropping my signal. i have v.8 i was told to upgrade my firmware but it is a .bin file and i am not sure how to access the file. anyone have any ideas?

Similar Messages

What is the general problem with this OriginLab VI?

I'd like to use some VIs provided by OriginLab for their graphing and analysis software. They apparently haven't updated their VIs since Labview version 8.5 The attached screenshot is an example of the general problem I'm seeing in their VIs. If I hover over the property nodes, the Labview context help gives the error "This property is not valid for this class." It looks to me like these are Origin classes and Origin properties, so I'm surprised by that error.
Any idea about the reason for this problem? I'd like to explain it to them in a little more detail and try to motivate them to fix it. Still, I doubt it will happen soon. Any suggestions about whether it's something I could fix myself?
Thanks!

The activeX interface might be inside a *.ocx, *.dll and even a *.exe file. So manually browsing and trying files with these endings might work. You could even try a text search with a hex editor to identify possible ActiveX components, you should find the keywords IDispatch and IUnknown in them.
The proper way would be when they show up in the list. This actually is derived from some registry keys (I think it was a bit cryptic to track in the registry, as it involved searching for CLSID or the like). Proper registration is done by command line regsrv32 (if memory serves right). Normally this is automatically called from the installer.
So it might be the best you just try to reinstall Origin.
Also search the Origin folder if there are some other examples included there (and if they work).
Felix
www.aescusoft.de
My latest community nugget on producer/consumer design
My current blog: A journey through uml

Problem with distribution model receiver ports

Hi,
I am facing a problem with distribution model.
I am using Distribution model for material classification data. I am sending my classification data using CLFMAS message type to one of the receiver. Again another person also sending classification data to another receiver.
But both objects will run at different times.
Problem is for every run and every change it is creating 2 idocs instead of 1 idoc.
I am able to create an IDOC with my changes for classifications. But it is creating 2 idocu2019s instead of creating 1 idoc. Because of there is another distribution model with same message type with different receiver port has been configured. I.e. reason it is creating 2 idocu2019s and sending to both the revivers.
When I run my changes It needs to create 1 idoc and send to my receiver port. If another person run his job it needs to create another idoc.
So how will I filter distribution model based on receiver port? it needs to create only 1 IDOC ..

Hi kotesh,
A similar issue.
check if this will help.
Do the following:
Go to TOOLS>ALE Development>IDoc Type Development> WE81 and create a new message type and give it a different name - say ORDERS2. Use WE82 to link it to an IDoc Type - say ORDERS05. So now you will have two message types linked to the same IDoc type. Each message type can now be referred in different logical systems without any clashes.
Now you can use BD64 to build your model using message types ORDERS and ORDERS2 without getting the multiple recepient error message.
Then use WE20 to set up each partner profile using your defined output conditions in message control to trigger the creation of the IDoc. Now you will beable to send the same Idoc type to different recepients.
source:http://sap.ittoolbox.com/groups/technical-functional/sap-interfaces/sap-distribution-model-3008763
Regards,
SuryaD.

I download firefox 5.0 and now I'm having trouble dragging and dropping PDF files into Google Docs and I can't view the PDF once uploaded. I had no problems with this in the previous verion of Firefox

With firefox 5.0 I can't drag and drop pdf files in the google docs screen. When I do eventually get a pdf file uploaded I can't view it. I get "no preview available". In my previous verion of firefox (4.something) I had no problems with this and I was able to drag and drop and after uploaded I could view the entire file.

Thanks one again. I know you helped me the last to. I do have the Deja Vu font set in my folder. I downloaded and the last time. So I don't know if there is supposed to be more or not, but those were installed with Windows-XP after my reformat.
This is really driving me nuts. as I've done several re-formats on my computer and several friends computers and even upgraded hardware so I am not necessarily a software or programming expert, I am somewhat advanced when it comes to computers in general and can usually diagnose the problem but these font's are the problem and they never were before.
I did see in another forum that if you had a Dell Computer and did the Microsoft update for the onboard video card driver that it could be the culprit, but I have that disabled being I have a much better graphics card so the updates from Microsoft for the onboard video weren't installed.
It' a Dell Dimension 3000 with an Intel(R) 82865G Graphics Controller so I don't believe it is the culprit being it is disabled. The actual video card that I am using is a PCI Nvidia GeForce 9400 GT with 1 GB Memory. And I didn't have any problem before.
I appreciate the help. But still can't get things to work. Live Help Chat doesn't open for another two hours so maybe they can do "Remote Access" or something and can check setting and help me. But if you come up with other suggestions, they would be greatly appreciated.
Thanks again.
Susan

There is a problem with this Windows Installer Package. No apple software installed to try uninstall/repair.

Trying to install latest version of 64bit Itunes. I'm getting the error message "There is a problem with this Windows install package. A program required for this install to complete could not be run. Contact your support personnel or package vendor". All the solutions require an uninistall of all apple software, which i have done, with no success. Apple software update is not in programs and features to uninstall. I've also tried install just safari, and I get the same error.
I've run cCleaner to fix any registery issues which hasn't worked either.
Any help appreciated.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) (not for XP) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

I originally bought an iMac 17 which crashed. Have now bought a second-hand iMac20. This has less preinstalled software, no iDVD, no iPhoto, Garageband, no iWeb. Can I use my original discs to restore these options to my new computer? Problems with this?

You might be able to depending on the age of the disc and the model of your newer used iMac. Only way to tell is to pop in the DVD and see if you can install the iLife programs.

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct tho

I spend good money for my iPhone i have the iPhone 5 with the new charger slot which is smaller. I have been through at least 3 charging cords and this is not acceptable to me. i never had a problem with this on my older phone. apple needs to correct this and reimburse me for this cord.

Charging cords are covered by the iPhone warranty or their own warranty
if puchased separately. Take your iPhone and the cords to your local
Apple store for evaluation and possible replacement.

A problem with this webpage caused Internet Explorer (IE9) to close and reopen the tab

I have IE9 (using 32-bit version) installed on a relatively new laptop with Windows 7 64-bit. Up until last weekend IE9 worked fine and Flash Player worked fine too.
At the weekend a webpage asked for Flash Player to be updated - which I did. Ever since then whenever I go to a webpage needing Flash Player I get the message "A problem with this webpage caused Internet Explorer to close and reopen the tab". This happens twice and then an IE9 error page.
I have read the discussions in here about the problems with Flash Player 10.3 and have tried the various solutions. I have updated to 10.3.181.16 having tried 15 and 14 previously. Same problem.
I have reset IE9. Same problem.
I have disabled all add-ons which stops the problem. If I enable just the Flash Player add-on then the problem recurs. Since there are so many webpages that use Flash I do not want to run my browser without this add-on running.
If I enable the add-on and run IE9 using software rendering instead of GPU rendering then I don't get the problem. However, this isn't exactly making the best use of the resources on my laptop.
This may well all be related to the 10.3 problems but no one seems to have mentioned having a problem with tabs closing and reopening so I thought I would post on here to check.
Any suggestions for how to solve this (other than using software rendering)?

Thanks again for your reply. I appreciate the time you have taken to respond.
I think, however, you misunderstand the problem. IE9 does not reopen the tabs on just one website - it is doing this on every website that needs Flash Player. Therefore, running in Compatibility mode is not an option. In fact, because IE9 reopens the tabs so quickly and then ends up with an error page, I cannot even click the Compatibility button anyway.
I could use ActiveX filtering - true. All that this means is that Flash does not play on any of the websites. When I want to re-enable ActiveX for a particular website where I need to see the Flash Player item, this just triggers the error.
This problem also happened on .14, .15 and well as the current .16 version. It did not happen with the previous version of Flash Player that I had on the system (version 10.2 I think).
The fact is that either Flash Player or IE9 or both is/are broken. The two choices I am still left with are:
1. Use software rendering (which contradicts the latest advertisements for IE9 about unleashing the power of IE)
2. Use another browser - I have no problems with either Firefox or Chrome

I am trying to install iTunes on my PC, but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." Help!

I am trying to install iTunes on my PC (using Windows 8.1), but I get this error: "There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor." The iTunes file (64-bit) I am trying to install, is named "iTunes64Setup.exe". What seems to be the problem? Help!

Hey madnest,
Thanks for the question. After reviewing your post, it sounds like you are having difficulty installing iTunes in Windows. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
Issues installing iTunes or QuickTime for Windows
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

I keep getting the following error message when I try to update my itunes, "There is a problem with this windows installer package. Aprogram run as part of the set up did not finish as expected. Contact your support personnel or package vendor."

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

When attempt to download 10.5, receive message: "...problem with this widows installer package. a program run as part of the set up did not finish as expected. ..." -- what to do?

I have attempted to upgrade my iPad which is necessar to downloan an app I want (My Radar). The iTunes on my computer will not process the upgrade of 10.5 without message: "There is a problem with this Windows Installer Package. A program run as part of the set up did not finish as expected. Contract your support personnel or packae vendor." ..... Little old lady needs help, my iTunes "appears to be 10.5 on my PC; however, will not upgrade my iPad. I have BitDefender as the "protector" on my PC if that is the issue.

Go to support.microsoft.com/fixit
In section 2 click on: Install or upgrade software or hardware
Then click on the title in section 3: Fix problems with programs that cannot be installed or uninstall
This link may get you there: http://support.microsoft.com/mats/Program_Install_and_Uninstall/
Let it run and then try to download it again

I get the errer message "There is a problem with this windows installer package. A program required for this install to complete could not be run."

I have Wondows Vista... I tried to upgrade to Itunes 10.5, and received an error orginially stating that I was trying to install a version older than the one I had. I uninstalled all of itunes, and now I'm getting the error message "there is a problem with this windows installer package. Aprogram required for this install to complete could not be run.
Help! I have an IPhone, and I would like to get my Itunes upgraded so I can download the new Iphone software...
Thanks!

I have been in touch with Apple support in reference to my problem. We went through every solution available, and found no fix. The tech then suggested I contact Microsoft concerning this issue. I thought that suggestion was just to get me pointed somewhere but Apple. Boy was I wrong!! I contacted Microsoft, and was directed to a free download called Microsoft Fix. This program fixed something in the regisitor, and wala everything was fixed!! I now have I-Cloud and I-Tunes loaded and working well. So, if you can't install Apple Software and are running Window 7 you might give Microsoft Fix a try, it fixed my problem.....

I am trying to upload itunes 10.5, but get a message "There is a problem with this Window Installer Pkg. A program required for this install to complete could not be run. Contact your support personnel or package vendor". What is it I need to do?

I am trying to install itunes 10.5, but during the download I get the following message, "There is a problem with this Window Installer Package. A program required for this install to complete could not be run. Contact your support personanal or package vendor." If this is my personal computer and was able to upgrade to the previous version (pre 10.5), why not now? What is my "package vendor"? And what is it I need to do to fix this? The message is unclear. Unfortunately, I deleted my itunes program, thinking that in doing so, 10.5 would finally load. Now I have no itunes on my computer and unable to sync my iphone. Help!
Thanks - Rick

Hi Rick,
by "repair" I mean I went to the control panel, option - programs and features, and in the list of all my installed programs I selected "Apple Software Update". On top of the screen you find the options Uinstall, Change and Repair. I clicked the repair button and that did the trick. After the repair I could uninstall the program. I also uninstalled iTunes, Apple Application Support, Apple Mobile Device Support en Bonjour, thus all Apple programs. Then I installed iTunes 10.5 again and everything went fine.
Success,
Peter

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.

I can't move photos from iPhoto to my secondary hard drive or to a burn folder. I have never had a problem with this before. This is something new.   They will not drop into either folder. Nothing happens.
I checked my secondary harddrive and there is plenty of memory.
I emptied my burn folder but the photos still will not drop into it.
I created a new burn folder, no luck with this either.
230 photos is the maximum size of the events I am trying to move from iPhoto to save elsewhere.
I have shut down and restarted my computer.   No change. The photos still will not drop out of iPhoto.
My Mac Computer Storage shows that I have 62.2GB free out of 249.2GB (movies, photos and contacts taking up the most space)
My Lacie External Harddrive (2TB capacity) shows that I have 1.79TB available. It shows that 207,729,520,640 bytes (207.73 GB on disk) are used.
I have never had this problem before. It is usually very easy to move my photos from iPhoto.
I am not a computer expert (I work in surgery so don't have a need for lots of computer knowledge) so please explain in simple terms.
Thank you so much for any help you can provide.
I really appreciate it.

YES Terence! Thank you. Exporting allowed me to move my photos from iPhoto into the Burn Folder on my desktop.   But that doesn't explain why I'm having to go that route now.   Have I done something (accidentally changed some setting) on my computer that will not allow me to just click and drag anymore?   I really liked the convenience of the click and drag option.
I don't have the time tonight to export and burn a lot of CD/DVDs. I'll try that tomorrow and make sure my photos are moving properly. I also need to export photos to my external hard drive to make sure that route is working.
Wouldn't you know that my Apple Care Plan runs out this Wednesday?! I need to make sure everything is working properly before that expires.
Thank you so much for your help.   I really, really appreciate it.

HT1926 when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

when trying to setup itunes on my pc i get the following message: there is a problem with this Windows installer package. A program required for this install to complete could not be run. How could I solve this problem?

Repair your Apple software update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START/CONTROL PANEL/Programs n Features/highlight ASU and click REPAIR,

WRT54G General problems with this model

Similar Messages

Maybe you are looking for