WRT54G - Help, intermittent stopping

Okay for about 4 months now my router will just stop working during periods of inactivity. I have 2 PCs hardwired (1 XP, 1 ME) a Wii, a TIVO connected wirelessly and anothe XP Laptop wirelessly occasionaly.
So what happens is I will wake up, go use the wired connection and get the site not found message. I then have to go down to the router and actually shut off the power,then once it powers back up do a hard reset of the router. I won't reset until I cycle the power. Once I do that I go back in restore my settings (correct time, WEP on , G-only) and go back to using it. It works I'm just tired of doing it. Do I need a new router?

Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
Follow these steps to upgrade the firmware on the device: -Open an Internet Explorer browser page.In the address bar type - 192.168.1.1 Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed". Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
You can do this Settings your Router so you should face any Problem. When you logged in to Linksys Router Setup Page... Change the MTU Size to 1365 it will right Below the SetupTab.
Do this wireless settings : -Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network.
Click on Advanced Wireless-
settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect..

Similar Messages

Itunes intermittently stops playing in middle of song

Usually, iTunes works great for me, but since version 6 or 7 updates it has intermittently stopped playing in the middle of a song as if it is locked up. iTunes will respond if I restart the song or use the left arrow. Pressing enter restarts the song also. It usually is random but today consistently does it on one song in particular. I’m pretty sure it is not my computer because this is a newly built machine, and iTunes did the same thing on my old HP since version 6 or 7 updates. My old computer also would intermittently drop to half volume randomly and then jump back up randomly (usually after I turned it up to compensate) at inopportune times. This machine hasn’t done that yet (it is running 64 bit iTunes and has only updated from version 8 to the current version) but I’m not convinced it won’t start anytime. Has this happened to anyone else? Any ideas? Thanks for your help.

Hello,
Have you blown the dust out lately?
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Switched from DSL to CABLE. WRT54G Wireless Router stopped working.

When I switched from DSL to CABLE, my WRT54G Wireless Router stopped working. I am not able to access the router page (192.168.1.1) Also, when I use the set up CD for re-installation, the wizard aborts in the middle saying it can not connect.
I appreciate any help to resolve this problem.
P.S. The router acts like a one-port wired router.

Here is my favorite method for resetting a router to factory defaults, and trying to get it working again.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

PLEASE HELP!!! My 'Apple mobile device helper has stopped working'!

Today i bought the new 3G iPhone so i went online to download the new 7.7 iTunes software. Now when i go into my iTunes a Windows pop up appears telling me that my 'Apple mobile device helper has stopped working' and that it is diagnosing the problem. The thing is that it doesn't diagnose the problem, the same box just keeps popping up over and over again.
I am not very computer literate and have tried everything that i can think of but nothing has worked.
Please can someone help because i'm absolutely dying to use my new iPhone; i queued up from 6 am to get my hands on it! :0(

I'm just a simple user. I don't know how to fix it any more than any of the other posters with this problem. I've looked around in control panel, done some poking and prodding with services and processes, and can't find a reasonable way to stop the messages without completely hosing up iTunes. I know the messages are annoying as ****, and nobody likes the idea, but sitting around and doing nothing is sometimes a whole lot better then doing something that makes it worse. See if you can find a document from Apple that tells you how to go back to the previous version of iTunes. I've seen that course of action mentioned several times for previous releases of iTunes upgrades, so the instructions for it must exist in another forum.
I just think, from the number of posts, that Apple is going to have to get a fix out pretty quickly, because this error pretty much shuts down their products on the Windows platform. They can't afford to let it go on for very long.

"Mobile Device helper has stopped working" after installing most recent

OK. Like a thousand other threads that have been posted over the past week or so on this topic and having tried most of the suggestions, I find myself at a loss.
After most recent update (which I installed on Monday) from 3.1.2 to 3.1.3 all **** has broken loose between my *iPhone, iTunes & Outlook*. This all came to light just hours after the install. . . . I noticed that my phone wasn't syncing - at all, it just "hung" there then I went into my contacts in Outlook - gone. . . UGH, EEK, OK, so they're still on my iPhone BUT I can't get to them in Outlook. After loosing most of yesterday and all of today I am at the mercy of someone who might know how to resolve this issue.
_*Steps I have taken :*_
I have un-installed and reinstalled iTunes 5 times, no luck, I've restarted, yada yada yada. I've hidden my Norton's Internet Security, allowed iTunes, etc. *Still no luck*. Take in mind, all was great after months of perfect syncing, etc. no problems whatsoever . . .
*The two messages that I continue to get when I open iTunes and connect my phone:*
1) "Mobile Device helper has stopped working"
2) " Unable to load data-class information from Sync Services. Reconnect or try again later".
The most recent error message under "Problems Reports & Solutions" on my start menu read:
Product: MobileDeviceHelper
Problem: Stopped working
Date: 4/7/2010 3:42 PM
Status: Not Reported
Problem signature
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application Version: 16.691.14.1
Application Timestamp: 4ba3b8fe
Fault Module Name: CoreFoundation.dll
Fault Module Version: 1.550.17.21
Fault Module Timestamp: 4b8cb530
Exception Code: c0000005
Exception Offset: 0000db6b
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
This is the same message that I have received the last 10 times under Mobile Device Helper.
*Please PLEASE please*, does anyone know how to resolve this problem?
*Thank you SO MUCH for any insight.*
-signed, UGH!!!

Hi,
I have had the same experience... uninstalled and reinstalled iTunes and all Apple components only to now be in a position where I can't sync my iphone at all (before I started trying various solutions I could still sync music... now nothing!) and I continually get the messages "mobile device helper has stopped working" and then "iTunes was unable to load dataclass information from Sync Services. Reconnect or try again later".
I even tried reinstalling iTunes 9.0 but somehow I don't have the old library saved - means I lose all the ratings, playlists etc.
Really frustrating and disappointing.

Mobile Device Helper has stopped working

I have just purchased an iPhone 3Gs, I have the lastest version of iTunes (9.1) and am operating on 32-bit Windows Vista using an Acer laptop.
First, the iPhone was not recognised - so re-installed iTunes, downloaded Service Pack 2 for vista, reinstalled iTunes. Did't work. Finally found a forum that lead me to delete a problem file for Acer laptops (can't remember its name now) but then my iPhone was now recognised!
Secondly, tried to sync my windows contacts (all my old contacta list from old phone) then had syncing problems..through more forums that error message stopped but now I have a new one that I can't get past...
'Mobile Device Helped has stopped working' comes up repeatedly and will not let me to anything with iTunes as it freezes until I end task in Task manager.
I have looked into other forums that talk of deleting the Apple Mobile Device, but it doesn't seem to me to be the rigt decision as the majority of people have just had to reinstall iTunes as it wont recognise the phone without the file.
It seems that the new iTunes doesn't like Windows Vista.
Please can anyone help me get past this point before I lose the will to live!! (it's been over 5hours now!!!!)
Thanks

Sort of the same issue.
Windows Vista 64bit Home Premium.
I just launched iTunes for the first time after installing 9.1. When I connected my iPhone, iTunes told me that I needed to install a newer version of Apple Mobile Device, which entailed removing/reinstalling iTunes and AMD. I remember there being an order to which applications should be removed, so I did that, but got stuck at AMD. I wasn't able to remove it. There was no error message, it just automatically rolled back the uninstall process and quit. I did some research and saw someone recommend using the Windows Install Cleanup Utility. I used that to remove AMD, and it worked. Next on the list was Apple Application Support (?), which also could not be uninstalled by normal means. So I used WIC on that as well. iTunes, Bonjour, Quicktime, and Apple Software update I was able to remove via the Control Panel. I rebooted, reinstalled iTunes, and when it began the install process for AMD I got this message:
"Could not open key:
Unknown\Components\DA42BC89BF25F5BD0AF18C3B9B1A1EE8\3F55235DF871F046A8F862841205 6EF. Verify that you have sufficient access to that key, or contact your support personnel."
Got the same message for Apple Application Support. As a result, neither was installed.
Prior to doing any of this, I had disabled AMD in Services, which didn't help. I have since re-enabled it, and it is still running in Services, although it does not show up in the list on programs to uninstall.
After all this, I read in another forum that simply doing a Repair on AMD would solve the problem, but since I am unable to reinstall it, I cannot test it out.
Message was edited by: Zachary Prewitt

I made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft helps in stop freezing?

i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?

Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better.

HT201493 How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

How do I get my old apple ID/email from popping up and asking to verifie it's getting annoying? I've change everything to my new email an my old one keeps popping up please help me stop it from popping up all the time?

Did you change the ID you are using for iCoud? If so, did you delete the account, then sign back in with your new ID on your device?

Help with stopping KeyListerner

Hi there,
I need help with stopping KeyListener{}. Ive made this applet, which functions in a game. Once the player has achieved the goal, i have a results message appear. but if you hold UP arrow key, the message flashes and the image keeps moving, prolonging the message to appear. I've tried a if{} block, but it doesn't work.
iam using DirectionKeyListener implements KeyListener {} with keyPressed (KeyEvent event) {}. The if {}block (mentioned before) i put into the KeyEvent section so it, for example, x == 9, it would work, otherwise display the message.
Thanks in advance
Landon

yeah i include them but i dont ultilise them.
i use the keyPressed (KeyEvent event) {}
the code looks something like this:
public void keyPressed (KeyEvent event) {
if (current == 9){
//all the normal events
} else {
// display results
public void keyTyped (KeyEvent event) {}
public void keyReleased (KeyEvent event) {}
current is the varible that changes when the race is completed. It changes and then should trigger the new event. Iam also using paint(), if that might interfere.
again, thanks in advance

Adobe Dreamweaver CC 2014 Helper has stopped working

When I try to import an Flash SWF file created with CC 2014 I get an error that says Adobe Dreamweaver CC 2014 Helper has stopped working. Then I get the option to check online for a solution and close the program or just a second option to just close the program.
Any suggestions to a fix?

I insured that Flash 64 bit was installed on my computer.
This problem must have something to do with embedding a Flash file. I could not recreate the problem on other client's websites. I pulled all the Flash code and the problem went away. Of course I want to include a Flash file so it's still an issue for me.
CODE I PULLED:
<script src="Scripts/swfobject_modified.js" type="text/javascript"></script>
<script type="text/javascript">
swfobject.registerObject("FlashID");
    </script>
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="100%" height="250px" id="FlashID" title="animatedDog">
            <param name="movie" value="dog.swf">
            <param name="quality" value="high">
            <param name="wmode" value="opaque">
            <param name="swfversion" value="10.1.0.0">
            
            <param name="expressinstall" value="Scripts/expressInstall.swf">
            
            
            <object type="application/x-shockwave-flash" data="dog.swf" width="100%" height="250px">
              
              <param name="quality" value="high">
              <param name="wmode" value="opaque">
              <param name="swfversion" value="10.1.0.0">
              <param name="expressinstall" value="Scripts/expressInstall.swf">
              
              <div><img src="/images/2014/noFlash.gif" alt="Missing Adobe Flash player" /></div>
              
            </object>
            
          </object>
         <br><img src="images/2014/sidePhotos/photo.jpg" alt=""><br>

How do I unprescribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issueand cancel it completely.

Hi my name is Natalia R. I had subscribed to FIT Radio, and got charged monthly. Now, I do not want the app anymore. I have tried canceling it, but it does not allow me. How do I unsubscribe from FIT Radio app. I tried, but it keeps charging my card every month. I DON'T want it anymore. Can you please help me stop this issue and cancel it completely without any further charger to my card.
Thanks,
Natalia R.
<Personal Information Edited By Host>

The following may help: Manage your auto-renewing subscriptions - Apple Support

RIM.Desktop Helper has stopped working

Hi there,
I just download Desktop Software v6 to my laptop HP window7 64 bit. when i installed, it open the WELCOME window and before i can press the Get Started button, it pop up another window saying RIM.Desktop Helper has stopped working and the windows is checking but after that it closed.
What should i do?
Many thanks

Hmm. That may be something in your calendar database is corrupt. Was your device ever synched before? There is a way of clearing the calendar database. So if you have your device synching with Outlook, after it's cleared from the BlackBerry, you could try synching again.
To clear the calendar database you can go into Desktop Manager | Backup and Restore | Advanced. On the right hand side select the calendar database and hit the Clear button. Afterwards try synching again
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Mail will not send or receive. It intermittently stops working. Why?

Mail will not send or receive. It intermittently stops working. Why?

I had problems with sending emails from one server in particular, however, I would ask if you have gone to the page of your server and found specific instructions for configuring your mail. My iMAC would not send out emails, so I went to my (Italian) server's page and solved the problem.
It was not sufficient to let the MAC wizard connect you up with your server, and, indeed, MAIL invited me to consider installing the server's email manually. So doing, my problem was solved.
Your server's page should have a list of email programs (cf Outlook, Thunderbird, etc.) , with instructions as to how to configure them. Look for the item referring to Macintosh Mail, keep it in background in order to go back to it as you configure your mail.
My problem was that I could not convince Mail to accept the out connection, but when I eliminated my server entirely in Mail's Preferences, I added that server once again: Mail told me that it could not safely transfer my password and asked me if I wanted to set up the site manually. I clicked on manual, and found very precise specifications as to the number of the port to be used, then instructions on how to find the menu for the out mail, with a particular number I had to insert in the drop-down menu they specified.
It was not as complicated as it sounds here, but requires patience.

HT1551 my apple tv intermittently stops playing music while playing Songza. network connection is strong. i have upgraded to the latest appletv s/w

My apple tv intermittently stops playing music while playing Songza. network connection is strong. i have upgraded to the latest appletv s/w
what can i do to fix this?

Strangely enough, I exchanged the ATV2 and ATV3 and now both work fine. I suspect it may have something to do with the fact that (previously) the ATV3 (1080p) was behind an ethernet hub. Somehow the ATV2 (720p) does not mind being behind the hub. Either that or iTunes suddenly became smarter since the exchange . Anyway, it works now so I'm not touching it. Thanks for the suggestion.

"unfortunately package access helper has stopped"?

I'm not even sure how to phrase this.
The message "unfortunately package access helper has stopped" has started to pop up whenever I access my settings. I own a brand new Samsung Galaxy S4, and i've looked everywhere for a solution, and can't seem to find one. Can anyone give me a solution for this error message? I would love to not have to restore my phone to it's factory settings.

We want to make sure you have the full access to your device, thatlifeisbeauty. Does this happen when you are in a certain application? If so, please follow these steps to clear the application cache. Here are the steps http://vz.to/1jNR0uO
RobinD_VZW
Follow us on twitter @VZWSupport

WRT54G - Help, intermittent stopping

Similar Messages

Maybe you are looking for