WRT54G huge problem NEED HELP! FAST!

I puchashed my WRT54G router about two weeks ago and connected it to my network and connected my xbox and xbox live to it. i noticed the live wasn'tworking as well as it should and found that i needed to open some NAT ports and update my firmware. While updating my firmware the interet page expired and i'd assume it didn't update, then i lost connection to live and the internet. It said on linksys advisor that the network had changed. So i tired to reinstall the router and it would'nt work. i made sure all the plugs were in the correct spot also, and even tried resetting the router but still no dice, and the big problem is i can't even view the router on that i.p website thing!!
p.s. i haveverizon internet and have a westell 1600 modem
if anyone can help me god bless you

verizon , ur modem is not really a modem . its a router/modem .
its already giving u an ip address in the same DHCP range as of the router . i.e: 192.168.1.xx
u need to just plug in ur router to computer , uninstall the easy link(wont be of any gud in verizon connection ,and its buggy as well ).
once router is connected to computer from port no.1.2.3or 4 ..any one .
Push the reset button on router for 30 seconds ..den unplug the power cable and plug in the power cable after 20 seconds.
then try to log into the routers web user interface - 192.168.1.1
see if it opens?
if yes
then ull find A local ip address option there- change it to - 192.168.7.1
and save settings .after saving the settings u might again kicked off from internet or set up web user interface.
then again , unplug the computer cable from router , and Power from router
wait for 20 seconds , now plug the verizon / westell into back of the router's into internet port as well.
power cycle.
lights should be like -power/wlan/1/internet - on router.
try to go online .
if it works ....let me know the status ?
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Similar Messages

  • Ipod nano Problems need help fast!!!!!!

    I got my nano in october everything was working fine.Until 2 weeks ago my ipod wasnt getting reconized by itunes.Im really getting frustrated and i need help.

    Welcome to Apple Discussions!
    Read through this...
    http://docs.info.apple.com/article.html?artnum=61711
    btabz

  • Conatcts huge problem need help A.S.A.P

    I am having trouble with my contacts on my Ipod touch at the top of the page it has a half circle with a arrow and i have tried clicking it and it does nothing it wont let me add contacts. it has also erased all of my contacts put on there and has only kept my facebook conatcts! in DESPERATE need for help need them back A.S.A.P! any help is appreciated

    i got it on my own last night thx but my email is still not working from my past convo

  • Huge problem need help

    I got an ipod nano today and i searched on google for ipod games and found idoom. It said i need ipodlinux which is where i downloaded it. I installed ipodlinux and my ipod doesn't work anymore. I get the folder with the exclamation mark and www.apple.com/support/ipod. Iv'e done the five "r" test and all. help.
    ipod nano   Windows XP  
      Windows XP  

    I'm afraid you are pretty much on you own with. As far as I know, you have voided your warranty as damage caused by installing non Apple software would not be covered. Apart from that, even within the iPod Linux project, the Nano is unsupported hardware. The best you can do is go to this link and follow the "What if something goes wrong?" instructions: http://ipodlinux.org/Installation#Unsupported

  • Big problems need help fast

    i have a k8n neo platinum edition, nvidia nforce3 250gb chipset mobo. recently i was playing on my computer then out of no where it just shuts off. went to try to turn it back on and the computer fans spun for less then a second then went off and nothing else happened. i assumed immediately that it was probally a bad psu so i bought a new one, and i still have the same problem. ive taken everything but the graphics card,processor, and psu out and it still wont work. i get no post or anything and the fans on the out side are the ownly things that react to me hitting the power button. i have no clue what else to try or do. i really need to get on it for work very soon. also i built this computer 2 or 3 years ago and havent had a problem till now.
    specs: radeon 9800pro 128mb
    80gb hd
    amd athlon 64 3000+
    k8n neo platinum edition mobo

    Quote from: njo on 09-October-06, 02:00:55
    i did list specs tho in the first post at the bottom. the only thing i forgot was the ram which is in one of my other posts.
    Put it in your forum signature so people don't have to hunt for the info. You might also try a minimal out of case setup as well.

  • Week Old MacBook, Big Problem need help fast!!

    Well im on my Macbook tonight and i get a message about a new softwhare update so i go ahead and instal it. Then it tells me to restart my comp so i do and as it boots up my screan goes blue and nothing happens. Its just blue. I shut it down and restart it and same thing only this time its goes from blue to a black screan. And jsut my luck its 11:30 at night so i cant call mac. Im pretty peturbed that this would happen to a less than a week old Macbook. Please help me. THanks
    MacBook   Mac OS X (10.4.7)  

    Hey Damasta,
    Sorry to hear about your problem... If you do a search in the forum, there are many posts on the subject.
    If you have an Apple Store in town, take it to a "genius" so they can take a look at it.
    Here's a link to some threads on the subject:
    http://discussions.apple.com/search.jspa?threadID=&q=won%27tboot+afterupdate&objID=&dateRange=last90days&userID=&numResults=15&rankBy=10001
    MacMini G4 1.42 GHz, IBook G4 1.42 GHz, MacBook 2 GHz 2GB RAM   Mac OS X (10.4.6)  

  • I've A huge problem,need help soonest

    I've bought a BLACKBERRY 8310 "VODAFONE", from a guy brought it from Australia,,
    I live in the middle east:Jordan:
    I cann't get it work with our mobile network,..also want an arabic interface instead of english 
    pls advice 
    rgs
    Message Edited by zjor2000 on 07-22-2008 12:13 PM

    1) your blackberry is set for an english spoken language country.
    you have to set it to another language. If it has not been removed, you can select it in the options (check the manual, you can download a PDF on the Blackberry.com website).
    2) your blackberry is linked to the carrier Vodaphone. You can use it only if you have a Vodaphone subscription. If you have not, you have to ask your phone carrier if it can deal with Blackberry devices. Call the hotline. If it's possible, they will tell you how to install a new OS that will enable you to use your Blackberry with your current carrier.
    Message Edited by Xandrex on 07-31-2008 08:18 PM
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

    My daughter has spitefully changed my password and has refused to tell me. I have so much medical information that I can not lose. Is there anyway to get around this problem. Please I need Help fast.

    Connect the iPod to your syncing computer and restore it via iTunes.  However, if iTunes asks for the unknown passcode you need to place the iPod in recovery mode and then restore the iPod from backup.  For recovey mode see:
    iPhone and iPod touch: Unable to update or restore
    "If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup). If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present. Refer to Updating and restoring iPhone and iPod touch software."
    Above is from:
    http://support.apple.com/kb/ht1212

  • Problems with exporting. Need help fast

    So I recorded some video game footage (Battlefield 4) and when I look at the raw file, it says it's 1920x1080. I edited it and finished it and even if I look in info it says that it's 1920x1080.
    But when I try to export the video it says that the source file is 1280x1080
    So when I export it, it is in REALLY bad quality and I usually upload high quality videos! What do I do? I need help, fast! I have Adobe Premiere Pro CS6.
    I have a i7 3770k CPU so I don't think that is an issue. 8GB of ram aswell.

    Quickest way:
    Get Started with Premiere Pro
    New to Premiere Pro? Get started with your first project — editing a video. In less than an hour, you'll learn to edit together different types of media to tell a video story.  

  • Need help fast with a buying decision - Leadtek 6800 GT

    Hi there, I have the opportunity to swap my Club 3D 6800 GT for a Leadtek 6800 GT. The reasons I would do this would be the cooling and the games bundle.
    I just wanted to know if anyone knows how the cooling is on this particular card and if it would be better than the reference design?
    My other concern is that it has a huge copper heatsink on the back of the card, this would sit directly under the CPU HSF. There really would only be a few millimeters between them and due to the position of the socket on this board, the heat sink fins go up vertically. Would the heat from the card's copper heat sink rise up into the CPU HSF grooves and raise the temperature of the CPU?
    Thanks for any help  
    I kind of need help fast as someone said they were gonna buy my other card of ebay today, there's still time to stop them if this is gonna be a bad idea

    i would definately take the leadtek one over the club3d card, the cards themselves are all based on refrence designs just different cooling solutions and bundles
    and the cooler on the leadtek is a lot better, and it isnt more noisy then the club3d one at all
    it has better cooling, and they seem to be the ones which are the most available, and they overclock very well due to the better cooling

  • Need Help Fast! Page is dispalying twice in quiz

    I have created a quiz using tips from another post in this
    forum. I insterted a regular slide with a continue button before
    the quiz questions. I insterted another regular slide at the end of
    the questions with a re-take button that points to that first
    slide. This part is working great. When I take the published quiz,
    I click the continue button, and instead of continuing, the slide
    redisplays. I click the button again, and it moves forward like
    it's supposed to. Any advice?
    I'm supposed to have these posted in our LMS today for
    testing, so I need help fast!!! Thanks!!

    What you're seeing is likely the result of a MS patch for IE
    in response
    to the Eolas patent suit.
    MS recently updated IE so any content shown in a page using
    the Embed,
    Object, or Script tags will need to be 'activated' before
    they can be
    clicked (or otherwise 'interacted with').
    Your home computer probably hasn't had the latest security
    rollup
    installed, is why you're not seeing the issue on that
    machine.
    There is a work around, many site mention it. This may be a
    good place
    to start:
    http://www.macromedia.com/devnet/activecontent/articles/devletter.html
    Erik
    dukekelly wrote:
    > Why is it that as soon as you ask for help, you find the
    answer?
    >
    > This isn't a captivate problem at all. It's an IE
    problem. Because the button
    > is a control in Flash, our systems where I work are
    requiring us to click the
    > screen to activate the controls. THEN you have to click
    the button. When I play
    > the movie on my home computer, this phenomenon isn't
    happening. Now, how am I
    > supposed to deal with that??? ASRRGGGHH!!!
    >
    Erik Lord
    http://www.capemedia.net
    Adobe Community Expert - Authorware
    http://www.macromedia.com/support/forums/team_macromedia/
    http://www.awaretips.net -
    samples, tips, products, faqs, and links!
    *Search the A'ware newsgroup archives*
    http://groups.google.com/groups?q=macromedia.authorware

  • My screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!

    If you have not done a factory reset on the device, I recommend doing a complete  factory reset.  
    Factory Reset  - Warning this will reset device back to original factory settings.
    This method will not erase any MDN/MIN information
    Turn off the phone 
    Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen 
    Display will show: 
    Reboot system Now 
    Apply sdcard:update.zip 
    Wipe Data/Factory Reset 
    Wipe Cache Partition
    Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device. 
    Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit. 
    Press Volume Up 
    Press Home to select "Reset System Now" - device will reboot
    If the problem persist I recommend having a store technician take a look at the device.
    Copy and paste the link below into your browser's address bar for the store locator.  
    http://www.verizonwireless.com/b2c/storelocator/index.jsp

  • Any hope, i need help fast

    ok just this morning i want to update my iphone from OS2 to OS3 and during that time i went to watch tv, but when i came back this happens
    http://i391.photobucket.com/albums/oo358/absolutezeromax/IMG_0057.png
    it tells me to connect to itunes, but i done it many times and ditunes just keep saying
    "you iphone have error
    the device is not regonized, unable to prompt service" or something like that, at least i translate back to enlish (i am brazilian)
    so i checked out the recovery tut but it wont work (this should reverse back to OS2)
    i tried to remove the batteries, sim card still wont work
    i tried to reinstall itunes thinking its the programs problem it still wont work
    i restarted both the iphone and the computer dozens of times
    i use the diagnosis on itunes and its working fine
    so i need help fast plzzzzzzzzzzz!!!!

    yea i did follow a tut
    1.turn off phone
    2.hold home button
    3.connect to itunes
    4.keep holding
    then it went into recovery mode but after that it just become that screen again

  • I NEED HELP FAST!!! how can i activate wi-fi if i want to use that for facebook apps instead of wasting my data?

    i want the 200 mb plan for my iphone and wanted to know if instead of using safari i can use apps such as facebook or tumblr without using up my data. i got the asnwer that i can avoid that by using wi-fi, but how does that whole thing work?
    sorry i am a bit new at this, and i need help fast!
    THANK YOU!

    hookedonlerman wrote:
    but will that replace the use of using up data? (wifi & 3G)
    It sounds as if you don't really understand what "using data" means. Data is not something different from WiFi and 3G, it's something sent over WiFi and 3G. Think of data as water and WiFi and 3G as types of pipes. Some apps need to send and receive data to work. That data can be sent or received in different ways. It can be sent over WiFi or 3G. Both official iPhone carriers in the U.S. have metered data plans. It's sounds as if you're talking about AT&T's 200 mb data plan. WiFi is not provided by your cellular carrier. You can have WiFi from your Internet Service Provider at home or you can access free WiFi at places like McDonalds or Starbucks or paid WiFi at places like airports.
    If you have WiFi turned on on your phone and WiFi is available, the phone will default to WiFi. WiFi is faster than 3G and generally not metered, and is sometimes even free. If you are out of range of WiFi, you would be using 3G to send and receive your data. With a metered plan, you need to keep an eye on how much you are using because if you go over your allowance, you will be charged additional fees.

  • My little brother messed up with my iPod touch 4th Gen by entering the wrong password , now all data is beeing erased what should I do.The iPod is just showing the Apple Logo and some buffering icon below it.Need help fast!I'm really worried!

    I really need help this has happend 5 hours ago and the ipod os still showing the apple logo and the buffering icon below it!
    It re booted several times till now.
    Need help fast!

    - I suspect that he went to Settings>General>Reset>Erase all content and settings.  For 1G or 2G iPod that can take hours and it will likely stall out if not connected to a charging source.
    Try the following:
    - A reset.
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - The connect to computer and try to restore via iTunes.
    - Id something is still showing onthe screen, disconnect from computer/charging source and let the battery fully drain. After charging for an hour, Try the reset and restore.
    - If you can turn the iPod off, se if placing the iPod in recovery mode and then restore. For recovey mode:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for