WRT54G just stopped working...

I have WRT54G connected to a cable modem for internet service. Came home at lunch yesterday and all was working fine. Came home after work last night and couldn't connect to the internet. Called Charter cable this morning and their troubleshooting showed I can connect to the internet fine if I bypass the router, so the issue must be with the router (and of course not their problem...). How do I trouble shoot this? I've tried powerig down the router and releasing and renewing IP addresses but it hasn't helped. Any ideas?

I am sitting here with My boss's WRT54G V.8 which won't connect to either his Comcast service or my 15mbps FIOS Actiontec after 90 days light use in his home. The router shows 0.0.0.0 as the gateway and 192.168.1.1 as the only DNS. I have had other versions of the WRT54G connected successfully to my Actiontec as well as countless home installs for friends and clients. I am not a noob. I manage the PC Division of an electronics firm in Philadelphia and have advanced networking skills. It appears the V.8 has some problems, at least a batch of them with 3 reports in the same time frame. DSLReports has no info on V.8 yet so this is the only source reporting problems. I suggest you get on the phone with Linksys Monday and start the RMA process.
Message Edited by Philly Dog on 10-21-2007 09:41 AM

Similar Messages

  • WRT54G - wireless just stopped working on all devices

    Hi All,
    I've had my WRT54G for a couple of years and have my Desktop hard wired (to the router) and 2 laptops and an ipod connecting wirelessly succefully for the past 2 years.Woke up this morning and nothing will connect wirelessly,finding the router is intermitent and when it does it cannot establish a connection with it. I can connect the devices via the network cable directly to the router and all works fine, it's just wireless that has suddenly stopped working.
    I have tried 'turning it off and on again" turning WEP off, changing WEP password etc. but nothing seems to work. Im at a loss as to why my entire wireless network/connection has just stopped working?
    Any ideas?
    Message Edited by coldfuel on 02-06-2009 07:36 AM
    Solved!
    Go to Solution.

    I'm having a similar problem. This past month or so, the router just kicks my wireless computers off the network. Then I can't find the network at all. My work around has been to go into the wireless setting (via my hard-wired computer) and change the wireless channel from 9 to 11 or vice versa. This keeps the network connected for a day or two and then kicks us off again until I change the channel.
    I've looked into the solution previously posted of upgrading the Firmware but I'm having a difficult time doing so. I'm on a Mac and the firmware downloads seem to be for PC. The other problem I'm having is that my model is WRT54GS (no version number). Should I assume this is version 1.0? I think so. Anyway, like I said, when I download the firmware for that unit, it shows up as a bin file (WRT54GSv3_4.71.4.001_fw,3.bin). I then expand it and it becomes a cpgz file (WRT54GSv3_4.71.4.001_fw,3.bin.cpgz). And back and forth, over and over again.
    How can I upgrade my firmware on my Mac? 
    PS> Current Firmware Version: v2.07.1 
    Message Edited by Enyko on 08-19-2009 07:05 AM

  • WRT54G just stops... frequently.

    This past week, my WRT54G v5 has simply been giving me endless grief. It seems that the router just stops working several times a day. As yet I can track no specific cause of the problem. I lose Internet, and when I ping the router (192.168.1.1) I receive the message "Host is down". It seems more frequent that the router dies when I'm using a laptop with wireless access, but this is not always the case (sometimes it's just down when I wake up in the morning). Modifying MTU size doesn't seem to help, nor does altering the broadcast frequency.
    Here's the network layout:
    ISP is Comcast (Cable) feeding into the router off of a Motorola Surfboard 5100. The service and modem are both fine: if I connect the PC directly to the modem, all is well. The all four of the router's LAN ports are claimed: an iMac G5, a Vonage device, and two old Linux machines. Feeding off the WAN are a TiVo, and occasionally two laptops: an iBook G4 and another old Linux machine running Ubuntu. This little network was functioning quite well for the past 9 months, until recently, and I've changed nothing lately.
    Anyone have experience with this situation?

    I am having the exact same problem as you. I am using a WRT54GS v6. Everything has run fine for about 2 months but lately the router seems to lose its internet connection. When it happens all the lights are still on however I am unable to ping the router. Everything returns to normal after I unplug the router and plug it back in. I have not made any changes to the router since I started using it and this has started happening just recently.
    I have tried upgrading to the latest firmware and it did not help. I am using comcast internet and I used a wired connection on the router most of the time and occasionally use wireless with my laptop. TIVO also has a wireless connection that goes through this. Due to the fact that it has worked perfectly fine for two months and now does this atleast a couple times a week I am thinking it is some kind of hardware malfunction. Through the many searches I have done I have found that this is a extremely common problem and no solution has been found yet.
    You can go to this other thread and see that these guys are having the same problem. I will think twice before buying another linksys product thats for sure.
    http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&message.id=31424
    Message Edited by jinruss on 03-12-200704:42 PM

  • Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory  settings and restored, still no wifi.

    Wifi just stopped working on an iPhone 4S, iOS 8.1.3. Have reset to factory  settings and restored, still no wifi. Will next release of iOS address this problem?

    Hey there kevin8!
    I have an article for you that can help you continue to troubleshoot this issue with the Wi-Fi on your iPhone. The article can be found right here:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Hopefully that will help resolve your issue. Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Hi, i have an IPod Touch 4g. One of the earphones just stops working after while,no matter how many times i replace them. What do i do?

    Hi, i bought my IPod 4G about 7 months ago. After about a mont of buying them, one the earphones just stopped working which became extremely annoying..so i bought a new set of earphones and they worked well for about 5/6 months and then one of them stopped working as well. About 2 weeks ago, i bought a new set of earphones and now the right earphone of that has stopped working as well. The thing is, the earphone doesnt just stop working on my IPod, it also stops working on my laptop...and now i am very confused as to where the problem lies. I can't keep buying headphones every other week cos that is just too expensive and i dont know if the problem lies with my IPod or what! The same thing is happening to my sister's IPod as they were purchased at the same time. What do we do??

    This previous discussion discusses the same if not similar problem.
    https://discussions.apple.com/message/6750990#6750990

  • Can't open a dng or raw file in cs5, just stops working. So many problems in cs5!

    I totally feel for you. Just upgraded from cs4 to cs5 and it was the  biggest mistake i ever made. It will probably end my livelihood as a  photographer since EVERY time i open a raw file it crashes photoshop,  makes it freeze up after i have adjuted the file in camera raw then I  hit open; i get a few bars then it just stops working.
    Even got  tech help, which helped when i was on the phone with them. The next day  the problem came back even when I danced the same jig that I did when I  had the guy on the phone - he had me move a raw file on to the desktop  rather than take open from my hard drive, then I was able to open it, so  we came to the conclusion that my drive was corrupt. I had the same  information backed up on a brand new hard drive so we compared files  from the each drive against the other. The files from the new drive  opened successfully. Yesterday. Now Photoshop cs5 doesn't open any raw  or dng files at all from anywhere so it can only be a problem with  photoshop. We thought we had the problem solved but we did not. This  never happened on CS4 unless i was trying to open 30 or more raw files,  and even then it gave me a warning that it had no more ram, it didn't  just lock up and do nothing. I'm at my wit's end. Even though there are a  lot of great new things in cs5, they aren't very useful if you can't  use the product to do the simplest thing.

    1) Install the Photoshop 12.0.1 update
    2) Install the latest ACR update.
    If problems continue after that, then there probably is something wrong with your system.

  • My Ipod just stopped working, the screen got black and now I can't open it. I have tried to charge it but it doens't work.

    My Ipod touch 5 just stopped working. The screen got black and now I can't use it or start it.
    I have tried to charge it but it doens't start and when I tried to connect it with my computer it didn't work either.
    I saw that you could hold down the "home" button and the "power" button at the same time but my home button doens't work so I can't do that.
    Is there any other way I can fix it or do I have to go to an apple store? 

    Try:
    Turn on without Home/Power Button

  • My ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.

    Most likely, water damage.
    You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
    If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
    Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.)

  • My lock button doesn't work. It didn't break, it just stopped working

    Ok. So apparently during a workout outside, my brand new, month old iPhone 4S decides it wants to workout too. So I brought it to my workout, put it in a backpack, and set the bag down as I normally do. The dew on the grass that morning apparently casused enough condensation to trigger my litmus paper, and now my brnad new iPhone has no warranty, hence my question here. I have been searching for a week or 2 now on information for this, and can find nothing. Apple will do nothing but tellme they can replace the phone for $200 but then won't wanswer questions about the issue itself, and I seem to be the only iPhone owner in the world with this problem, so it's nowhere on the intarwebz.
    So my lock button, up top, on the shoulder, stopped working. It didn't break, it didn't get stuck down, it just stopped working. Like, the screen flashed (go to wake the phone up, it didn't wake up, so I pressed the button again, and it flashed on and then off again real quick, like normally would). Hit it again, nothing. Hit the Home button, woke up. Played with phone, etc, went to put to sleep...... nothing. Hit the button multiple times, nothing. Button still clicks down and functions as the button itself should, but no sleep or wake. The button only actually does what it's supposed to do when I hard reset, or the phone is off and I'm turning it on. I can't take a screenshoot of the phone, and every now and then my phone will be just sitting on the table or wherever, and it will wake up, the "Slide to Close" bar pops up, and then 15 seconds later, goes back to bed.
    Has anyone else experienced this issue, and what should I look at fixing inside? I have not taken this one apart yet as I don't have the tools anymore, waiting on them to get here, but I figure Apple has screwed me on my warranty, so I'm just going to fix it myself. Never had this specific issue before, so I'm not really sure what the **** is messed up until I can take a look inside. Any help until then would be wonderful. Sorry for the long back story, and thanks for looking.

    Your problem is rare from the symptoms you describe. Most lose the click function, yours still has it. Yours functions sporadically or only for certain functions. Maybe it is liquid damage causing this. Maybe it will dry and be OK.
    While waiting for your Pentalobe Screwdriver, try a Firmware Restore with iTunes. See if this helps. If you still decide to procede, the first step inside should be to carefully disconnect the battery at its connector. Also all the screws inside are different sizes, except for some of the Screen screws, so keep them well sorted.

  • 2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
    The TC runs too hot..
    Look on ebay for "Time Capsule power supply"
    You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
    If you can DIY it is really only a few dollars worth of capacitors that go bad.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    For a bunch of alternatives.

  • My Mail search feature in Snow Leopard just stopped working

    My search feature for Mail in snow leopard just stopped working. I had a system crash while trying to reformat a corrupted flash drive. Now when I search in mail it just spins the color wheel. Any suggestions?

    Hello FredBus,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand your TouchScreen stopped working and you are inquiring as to whether you can toggle it off and on.I would be happy to assist you, but first I would encourage you to post which operating system you are using. And whether your operating system is 32-bit or 64-bit as with this we can provide you with accurate information.
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • CS6 just stopped working last night.

    PS CS6 Extended  just stopped working over night and so has my version of CS5.1. I have a trial of CS6 Master Suite going and they are all dead too, and no the trial isn't over.I don't even get a flash screen.  Actually I got bridge to open and it asked me to install ACR6.7??? I have  LR 3&4, Element/Premiere 10 and they are fine. I have wiped my MAC twice with the CS cleaner and have spent the entire day on chat help and the phone. Nothing is working, any ideas?
    Oh and NONE of them will recognise my camera, it's just plain bizarre
    Message was edited by: weatherfreak
    Oh I have a MacbookPro Early 2011, 8GB Ram 1333Mhz DDR3 , i7 intel core 2.3Ghz, 750MB HD and 4TB external HD. I had noticed how slow it's been running lately too

    I suggest you try a factory reset of the hub
    http://bt.custhelp.com/app/answers/detail/a_id/113​86/~/how-do-i-reset-my-bt-home-hub-to-its-factory-​...
    If you found this post helpful, please click on the star on the left
    If not, I'll try again

  • Spotlight just stopped working.

    Spotlgiht search just stopped working.
    I recently upgraded to 10.8.5
    Any suggestions?
    Here is spotlight in system preferences:

    Rebuild/re-index spotlight.
    HTH

  • Hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10

    hi, all of my adobe has just stopped working.. CS5, and adobe acrobat 10
    also, these were bought on line with no disc (god knows why)
    how can I access these from adobe.com

    Hi Dave ,
    Could you please elaborate a bit more about the issue ,what exactly has happened?
    Are you not able to launch and PDF' or getting some error message ?
    You can log in to Adobe.com with your credentials .If you do not have any prior credentials ,you need to create an account .Adobe.com will either let you purchase the product or opt for a trial version.
    Please go ahead if that matches your requirement.
    Regards
    Sukrit Dhingra

  • My ipod touch 5th generation keeps wifi signal for 10-30 minutes and then just stops working.

         I've had my ipod for about a month now and it worked fine up until this week.
    This week I noticed probelms with the wifi. I would be just on facebook or browsing the web and the wifi would just stop working. Every time I turned wifi off and the on again it would give me about 5-10 more minutes of wifi before I had to do it again. I've never expeiranced this with my other 4th generation or 3rd generation ipod touches. The wifi itself is not the probelm because it works just fine on my laptop. Today I updated my software and the probelm was not resolved.
         I need help sould I got to the Apple store and have them check it out?

    Does the iPod have the problem with other networks?
    Do other devices work OK?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - DOes the router have the latest firmware?
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

Maybe you are looking for