WRT54G keeps disconnecting (See 6th message)

Suddenly, mid morning, I can't connect to my WRT54G.  Early it was working fine.  Now, when I search for networks, it shows up sometimes and then doesn't show a few seconds later.  Regardless, none of the computers here will connect after "waiting for association".  Securities all are set up correctly, but obviously there is something going on.
Can anyone help?
Thanks!
Message Edited by Guidry on 08-28-2008 09:32 AM

OK, a little update and more info on what's happening now:
Now, after some tech support help from Linksys, I was advised to rename the SSID and change the broadcast channel.  That seemed to work for about 24 hrs.  Now the problem is that I connect and can get to one website, but just as soon as I try to go to a 2nd website, the connection drops off to zero.
Additional possibly related issues:
1.  On Sunday, I began to get what appears to be some type of spyware pop-up telling me that my computer is infected and I need to download this new update/program.  It is from some "scanner-antivirus.com" or something similar site.  I am sure it is spyware so I immediately closed the window.  What is weird is that the laptop I am using is from work and has administrator privs blocked so I cannot go into the registry to try to remove this.  I still can't figure out how it can get into the registry, but no one can access the registry to get it out, but that is a different story.  Could this spyware be causing or have caused the problem with the router?  The laptop is not directly wired to the router.
2.  Scanning for available networks in my area shows there is one secured network (apparently a neighbor) that always shows up at 90%-100% within my house, while my network typically ranges from 70% to 90% unless I am in the same room as the router.  I have read that this could cause interference, but how do I block such a "dominant" signal?
Any help will be appreciated.

Similar Messages

  • TS1702 why do i keep on see the message "your purchase could not be completed contact itunes support to complete this transaction"everytime i want to purchase?

    why do i keep on see the message "your purchase could not be completed contact itunes support to complete this transaction"everytime i want to purchase?

    Click here and request assistance.
    (78282)

  • Wrt54g keeps disconnecting

    hi, i have a pc connected OS: win xp sp 2. connected wired to the router wrt54g v7 the other computer is a laptop connected wirelessly to the router the router keep disconnecting the pc and the laptop at random time. Can anyone help me with this problem. thanks regards, bongel

    Access routers setup page using http://192.168.1.1  ... you will see username & password ......
    Leave username blank & in password use admin ......
    Click on "Status" tab ...... it will show firmware version of the router ....
    Check the latest firmware from http://www.linksys.com/download .....
    After reset .... reconfigure the router ....

  • WRT54GS keeps disconnecting

    I have either a version 1.0 or 1.1 of the WRT54GS and I had been using unencrypted as I lived in a pretty rural area, since moving to a more busy area there are other WIFI connections so therefore I decided to enable WPA2 on my network. Upon doing so the network works fine unless you either download, stream or anything high bandwidth. The network disconnects altogether from the computer / laptop that was carrying out the task. Disabled WPA2 and the network worked fine again with no disconnects or anything whilst doing same tasks. Any ideas? I have the latest firmware and the firewall option is enabled if any of you are wondering.

    You can Enable the Wireless Secyruty on your router again... Login to your Router setup page and Change the Wireless Settings .... Click on Advanced Wireless
    settings>>Change the Beacon Interval to 75 >>Change the Fragmentation...
    Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect.... After this You can try.

  • Trying to import photos in Aperture but card/card reader keeps disconnecting ..error message then appears ?? any ideas

    I have been trying to import my photos but "disk not ejected properly" keeps appearing. I am not moving it or doing anything etc. Could it be a software issue? or could my card reader be at fault? However it does work fine on my other computer

    Is it a built-in card reader or connected to an USB port? 
    Have you tried a different USB port?
    Have you tried to read from a different card with new photos?
    Download and save all photos on your other mac, where you can read the card, and reformat it in the camera.

  • Linksys WRT54GS Wireless Router keeps disconnected

    Hi, My wireless router WRT54GS keeps on disconnecting without any reason. I have also changed the channel to 11 but still the same issue. It connects for 1 minute and then it stops working even though the signal says "excellent strength" and all the bars are green.

    Hmm. I seem to be having a similar problem (see my thread). Check the cable that is pulugged into the back of the computer. That is where my problem lies. The computer doesn't seem to be reading it. If i get some info, ill help you.
    EDIT:You have to check the IP address of the computer connected to router. If you are getting an IP of 169.254.x.x, then the router might be defective.
    Message Edited by eviluchiha1 on 04-21-2008 02:27 PM

  • Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Hey ronniefai,
    Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
    Viewing the Print Summary
    You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
    Note: Print Center is available only while printing is in progress.
    via AirPrint Basics
    http://support.apple.com/kb/HT4356
    If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
    Thanks,
    Matt M.

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • HT203200 Hi! i keep seeing this message popping up on my itunes, intunes could not connected to the itunes store  an unknown error occurred (-3212) can someone help me please?

    Hi! keep seeing this message on my computer, could not connected to the itunes store unknown error occurred (3212) can someone help please?

    Perhaps try the Errors 3000 through 3999 section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either.

    I am trying to export photos and keep receiving an error message. I tried relocating my catalog to see if that would help since I am saving to an external drive, but now I can't find my catalog at all either. I am a newbie at this and don't know what I'm doing wrong or if I can even use an external drive for my photos and catalogs (I did enable smart previews so I do know how to do that part). Help!

    You can use an external drive with LR but I recommend only using it for
    image file storage while keeping your catalog on your internal HD for
    performance. If you moved files outside of LR (Finder or Explorer) you will
    have to clue LR in on where they are now. Use the left-hand folder panel in
    Library mode to navigate to the location on your external drive and use the
    find photo option get LR to reconnect them. If you moved the catalog and
    now LR can't find it you should get a window allowing you to select a new
    one where you can navigate to the new location and select it. You can also
    just start LR by clicking on the Lightroom 5 catalog.lrcat file to open it
    and start LR.

  • I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

    I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
    Can I log into 2 email accounts on my ipad where it says mail at bottom?
    Can I have 2 apple ids?
    If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
    (won't let me)
    If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

  • Messages and FaceTime keep disconnecting from my MacBook Pro.

    iMessage and FaceTime keep disconnecting from my MacBook Pro. I’ve never turned either of them off on my computer, but every time I turn them back on, they work for about a week, and then I start getting messages and phone calls on my iPhone and iPad but not on my MacBook. Is anyone else having this problem?

    I'll ask the hosts to move this post to Yosemite.
    Handoff Continuity Troubleshooting
    iPhone, iPad, iPod touch, and Mac using Continuity - Connect

  • I have an iPhone 3G.  I removed the simm card and placed it in another phone.  Now I want to use it to just play music.  I keep seeing a message on the screen that says the simm card is missing.  Are there settings I can use to prevent this message?

    I have an iPhone 3G.  I removed the simm card and placed it in another phone.  Now I want to use it to just play music.  I keep seeing a message on the screen that says the simm card is missing.  Are there settings I can use to prevent this message?

    no are gonna need a SIM card in the iphone for it to work even to play music on it

  • Keep seeing the message, "Unable to connect to Apple TV." -- help?

    I keep seeing this in the upper-right part of the screen:
    Unfortunately, there's no message in the notification center, and there's no (apparent) message in Console. I literally have no idea why I keep seeing the message, and it's quite annoying.
    Currently using a MBPr via. 802.11ac TimeCapsule. The Apple TV3 I have connects wirelessly to a last-gen Airport Extreme (and that's connected to the Time Capsule via. extended wireless). Signal strength is excellent for all devices.
    Any ideas?

    Open AirPort Utility (in your Applications > Utilities folder).  Click on each device shown there (e.g., Time Capsule, AirPort Extreme).  Make sure they are running the latest firmware.  They will warn you if they are not once you click on them.

  • External hard drive keeps disconnecting and then reconnecting

    External hard drive on Time Machine, running via USB keeps disconnecting. Get the pop us that the drive wasn't disconnected properly. This Mac is brand new as is the hard drive. It is a Seagate 1T Free Agent.
    After a minute or two it reconnects. I've run Seagate diagnostics and it says the drive is fine.
    Any suggestions?

    See #A1 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for a handy widget that will display the backup messages from your logs.
    See what that shows; there may be a problem with the backup, which results in TM ejecting the drive. If so, the disconnect may be a symptom, not a cause. If so, see #C2 there. If not, or if you're not sure, copy and post them here.
    Also, to rule out other USB problems, disconnect everything but keyboard and mouse; connect the drive directly to your Mac (no hub).
    Make sure all connections are snug and secure.
    Try other ports, cables, and combinations of the two (a plug that works fine in one port may not make good contact in another one, and throw intermittent errors).

Maybe you are looking for

  • Using WSDL2java to generate proxy from wsdl

    HI, I have a web service (implemented in .NET) which extends soap headers for doing Authentication. WSDL is generated out of this web service. But when i use wsdl2java (J2EE) to generate a proxy class, there is no interface generated for soap headers

  • How to hide fields in Web UI on basis of some data conditions

    Hi, Is there any way we can hide the fields on some data conditions, i know we can disable the field in get_i method but just wondering if we can hide it completely. Regards, Kamesh

  • Unable to complete backup. An error occurred while copying files...

    And the saga continues... I haven't been able to use Time Machine for a week now because I keep getting the "Unable to complete...". What I've noticed is that, in my case, Time Machine stalls at 15.73G - out of 33.77G. It stops for a while, then "fin

  • HT1338 my computer constantly restarted itself

    Since last week, my computer restarted itself constantly with error message on screen "your computer was restarted because of some problem". It became very frustrating after the Apple Tech could not help with the issues. I would like to know who can

  • Powerbook G4 Intermittent Start Up Issues

    Afternoon Everyone, I have a Powerbook G4 1.67ghz 15". Unfortunatly I am having issues we startup on the machine as of late. I would press the power button receive the Start Up Chime as normal but where I would normally see the screen pop up the Appl