WRT54G Language and conecting problem.

I have router Linksys WRT54G version 7. When I installing my router first time everything worked OK. When I installing my routers in my parents DSL link, it doesnt work. I gave this error message Step 9: Sender Error while upgrading the router's language pack I find in this forum, I tried 192.168.1.1/language.htm to upgrade language from routers CD in directory Pack/en_lang.bin. It gave me white window with black border without any text or buttons. When I try to read web based menu, I see only graphics and numbers without any text. I cant change anything. In step 10 : Router configuration error. Would you like to try again? and Unable to connect the Router. Check the cable connection from the computer to the router. Cables are OK, because internet on main PC works fine, wirelles I cant configure, I doesnt see menus. I tryed RESET button, my firmare is last official 7.00.4. Sorry for my english.

Basically, your router's firmware has been corrupted. With the same reason, the configuration or setup page is corrupted as well. This means that you cannot do a firmware upgrade by using the router's setup page (The one that you usually access through 192.168.1.1).
To solve this problem, you may need to download a certain application that will help you in upgrading the router's firmware instead of using the router's setup page since in the first place, it is corrupted.
You need to download TFTP.exe (The application that upgrades the firmware of the router rather than using the setup page) and finally the Firmware file that is downloadable from the Linksys website.
Dreamers*

Similar Messages

Opera mini language and server problem on Nokia 63...

I've Opera Mini 5.1 installed on my Nokia 6300. I
downloaded it in English (Indian) language. But when i
Google some item the results come in russian
Language & my gmail account shows that it has been
accessed via Russian servers though at the same time
i'm accessing it from my phone. I've already installed
and reinstalled Opera mini. And this problem doesn't
come up when i use Bolt or the phone's built in
browsr. I've already formatted the card & phone at
nokia care. Pls help me out as Bolt or the built in browser doesn't allow multiple downloads at the same time
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

The problem of russian language persists on searching any site. Also just discovered that Bolt uses U.S. servers instead of using Indian. Is it security problem with the phone or browser? Pls help.
Please mark the post as solution if it solves your problem.
Current Device - Nokia Lumia 1020/920

WRT54G v3 and BEFW11S4 Problems

It started off like this. My WRT54G Suddenly Bricked on me out of the blue. I dont know what caused it. So i hooked up my old BEFW11S4 to find a way to unbrick the Wireless G And i remembered it had the same wireless settings as the Wireless G. the Wireless was working fine For a while but it started timing out. so i get on the computer thats hooked up to the router via ethernet and i noticed the act/link light was blinking at a rapid rate but windows(vista) was saying the connection had little to no connectivity and couldnt ping the the Router. So i reset the router and it was acting wierd the Power started blinking and thats all, then i held the reset button even longer, but it came back on so i set everything back up and I quickly looked for a way to fix my wireless G, and it worked i got my wireless G back working. I set everything back up changed the router password, SSID and set it not to broadcast because I thought someone got into my router and started changing things. After a few hours the wireless G started acting strange again so reset it and it started Restarting By its self while the Powerlight constantly blinks. i held the reset button untill Dmz light came on nad the router stopped resetting itself. so i used the TFTP program from the site and it said the flash was successful and the router stopped responding. (I had cmd window running ping -t 192.168.1.1)The router restarted and it went back to what it was doing before, constantly restarting it self.
I hooked the Wireless B back up and that rapid blinking activity light was bothering me so i restarted the computer while the computer was off the like was still blinking. so when windows finished starting up i changed the link speed 100mbps full/half duplex made the the router blink but it stopped when i set it to 10mbps full.
Is it possible that one of my computers is causing my routers to act strange?

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!!

WRT54G: Pinging and Disconnection Problems

I have the WRT56G and both the wired and wireless connections are very weak. When connecting my computer directly into my cable modem, the connection is very fast and rock solid. For example when I ping linksys.com when connecting directly into my modem, the average latency is about 15ms. When pinging linksys.com using the WRT54G, the latency is a horrendous 3800ms. I've already swapped things 4 times already and every time is the same. Constantly getting disconnected from games, getting 404 errors when visiting websites.
(Mod note: Post has been edited for non-compliance of forum guidelines.)
Message Edited by primus on 11-19-2007 12:42 AM

Well try upgrading the firmware of the router & keep on holding tightly
the reset button in such a way that power light is blinking on the
router & then do a complete network power cycle i.e., unplug the power
cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!
Also,the advanced wireless settings to Beacon Interval=50,Frag
thres=2306 & Rts thres=2307 & then uncheck a Block Anonymous Internet Requests & it will definately work!!!

WRT54G Router and print problem

I have my desktop wired to the router. Laptop is wireless.
Desktop is always on so I want to be to print from laptop.
Running XP with firewall off. File and print sharing enabled.
Broadband internet works fine on both. But when I run
Network setup wizard I lose my internet connection on the
wired desktop. Have to restore on desktop to get it back.
What am I doing wrong?

fscoglio wrote:
Workgroup names are same.
I set up shared folders on both computers.
Firewall is disabled.
I can ping laptop from desktop.
Laptop is 192.168.1.104
Desktop is 192.168.1.1 which is same as router? Is this correct?
Devices on the same network cannot have the same IP address. Since 192.168.1.1 is for the router, check the IP of the desktop and try to ping that.
"When you have eliminated the impossible, whatever remains, however improbable, must be the truth."

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage

After the last update of the iPhone 5.1 sound became low tones specifically entered into the settings and made the maximum sound d, but to no avail there is no update for this problem Haddl Is it possible to delete the Japanese language and take advantage of memory storage space
Osmhto tried to solve the problem of low sound we have become we do not hear a tone sounds clearly like the first phone

hello...
I am having the same issue here... just upgraded my 5s to 7.1.1 (never jailbroken - factory unlocked) and then boom... NO Service!!! Searching ... that's it. currently using Smart Telecom Sim... at first it was working for me... after 6-7 hours, it started the No Service issue. I cannot send a text or make a call...
I did the steps you have taken but it is still not working... any updates on your end?

I am trying to conect a wrv200 to a WRT54GS v4 and use the WRT54GS as a repeater?

i am trying to connect a wrv200 v1 to a WRT54GS v4 and use the WRT54GS as a repeater? Can this be done i have latest firmware in both.

you cannot use router as a repeater... router has only AP mode it will broadcast the signals but it will not repeate wireless signals.

Using the "Party" Menu and Having Problems?

There has been much discussion regarding problems with the "Party" Menu from the En Library. All sorts of problems, but the common aspect was this particular Menu.
Thanks to Jeff Bellune, we have looked closely at this Menu for any errors on Adobe's part. None have been found. The only possibility that Jeff, or I could see, was that the font used, Brush Script Std. might not be installed on all machines. This would trigger an error message in Photoshop, and ask permission to substitute that font for one that is installed. No problem, other than a substituted font. However, Jeff pointed out that Encore might have issues with a missing font, and not treat this in the same way that PS would. This is a bit of speculation, but in Jeff's case his "speculation" is much better than my "knowledge."
As for the font, it ships in the "Goodies" section on the installation disc, and should be included in the Functional Content with the downloaded version of CS3/CS4. It should also be part of the full install, though I suppose that there would be circumstances where it might not install automatically. If this is your case, just go to your installation disc, and locate the font. Use a manual install through Windows, or your OS. Now, this particular Menu should function perfectly. There could also be others, where the font might not be present on one's system. Again, the solution would be the same - install that font.
The only oddity that I found was that the Sub-picture Highlight of the first Button was turned ON. Not sure if this was just a mistake of Adobe's, or was maybe something that I did accidently. Either way, if you get Button 1 with a Highlight (star Shape to the left of the text), just go into that Button's Layer Set and make sure that it's turned OFF. That is the correct state for all Sub-picutre Highlights. The DVD player, or computer, will turn the appropriate one ON, when that Button is navigated to.
I think that I can safely say that there are no "gremlins" in that Menu. Besides checking out perfectly in PS, it functioned perfectly in En. Of course, I had that font installed, as did Jeff.
If any user finds any problem with that Menu, please post the complete and exact details on what you encounter and complete details on your version of En, plus the installation method and language of both the installation and the program. Those could be very important. More details are better.
Hope we don't see mention of the "Party" Menu, except that people used it with NO issues.
Good luck,
Hunt

willlayb wrote:
i am using a wrt54g router and the modem is plugged into that wan port and i want to use a befsx41 router to add more ports for internet and to give some extra places to use internet on it. how would i get this to work because i have internet from the wrt54g router wired and wireless but the stuff plugged into the befsx41 doesnt work...
Hi
I Think u are missing something in between.
Follow the Magic Link , and observe the steps.
hope for gud .
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Oracle 8.1.5 install on Linux Redhat 6.0: character set (and other) problem(s)

I am trying to install Oracle 8i on Linux and it does not work : once the install is finished, I have a message saying that "Character Set not found".
I am runing a french version of Linux (fr-latin 1) and I try to install Oracle with French and English as languages
An other problem about this install : Oracle does not seem to recognize that I have 6,9 Giga for it to install, and says that I have not enough space for the install...
And at the end of the install, it takes for ages (about 15mns) during which nothing seems to happen. On one machine I got out of this phase, but on the other I never saw it finish, it looks as if the computer crashed. Is that normal?
I went through all the initialization phases, set the correct environment variables...
thanks
Solange
null

I've been dealing with the same problems in the english version but could bypass thiss by doing the folowing.
-Just ignore the disk space stuff
-Ignore the charset message, also
-When creating a database, choose custom and then select the WE8ISO8859P1 char set. It worked for portuguese, must work for french also.
-Everyone here recommended, and I do the same, leave the database creation for later, not during instalation.
Good Luck!

How to restore the languages in the input sources under 'Language and Text'

Dear all,
Recently, I am trying to free up my disk space on my macbook and I downloaded this software call Monolingual. Basically, it removes languages that you do not use to free up the disk space.
However, I accidentally remove the language that I use which is Japanese and now it seems like I cannot find it anywhere under the input sources of language and text.
Does anybody know how I can restore everything back to normal?
Thanks in advance.
Cheers,
Alfred

I think you will have to reinstall your OS. If you are running Yosemite, see
OS X Yosemite: Reinstall OS X
Best to avoid Monolingual and simlar "cleaning" utilties if possible, it is too easy to make mistakes that destroy parts of you system.
Your problem has nothing to do with your hardware, so in the futue it would be best to use the software forums for similar questions:
Mac OS & System Software

Korean language pack causes problems with Outlook email width

This has been an ongoing problem for me for some time now and I'm hoping someone can provide a resolution to it.
I had to install a Korean language pack in order to read Korean Word documents. The problem is that after installing this language pack, it causes some of my emails to appear a lot wider than they should and wider than they appear for others receiving
the same email.
There seems to be a trend in that it happens with emails that contain Chinese or Japanese languages.
I uninstalled the language pack and the problem went away. Then recently I reinstalled the language pack and the problem returned.
Does anyone know why this would happen and if there is any way to fix it without having to uninstall the Korean language pack?

Well, I tried installing all updates (including optional ones), but that did not fix the issue.
Any other ideas?

R/3 Transport and tp Problem

Hello,
I downloaded the necessary support packages of SAP_APPL ( Lojistik ve
Mali isler ) and P3A ( P3VA:500 Add-on Installation) on AFS Test system
and updated them on their patch level. There was no problem with P3A,
but I installed the patch level on SAP_APPL component to 009. Then I
take the message "text" while installing 0010 patch and we
cannot request the release in test system. I had a search for some
documents about this on OSS but failed. Patch levels,after updating,
are like the folloving:
P3A-V500-0005-SAPKIAF505-P3A V500 : Add-On Installation-Comp.Supp. Pkg.
SAP_APPL-500-0009-SAPKH50009-Lojistik ve mali işler- R/3 Support Pkg.
I also add our R3trans and TP version info.It is old, but we couldn't find the new version at SAP Service Marketplace for KErnel 6.40, how can we upgrade R3trans / TP ? (Do we have to upgrade Kernel patch? Our kernel level is (release 640, patch level 87).
<b>Error Message</b>,
The import was stopped, since an error occurred during the phase
IMPORT_OBJECT_LIST, which the Support Package Manager is unable to
resolve without your input.
After you have corrected the cause of the error, continue with the
import by choosing Support Package -> Import queue from the initial
screen of the Support Package Manager.
The following details help you to analyze the problem:
-   Error in phase: IMPORT_OBJECT_LIST
     -   Reason for error: TP_FAILURE
     -   Return code: 0016
-     Error message: A tool used by tp broke down
Notes on phase IMPORT_OBJECT_LIST
In this phase the object lists for the Support Packages in the queue are
imported into the system. This phase can terminate due to the following
reasons:
o   TP_INTERFACE_FAILURE: The tp interface could not be called.
o   TP_FAILURE: The program tp could not be executed. For more
     information on this, see the SLOG or ALOG log file.
o   COMMAND_FILE_IMPORT_FAILURE: The object list of one or more Support
     Packages could not be imported. For the cause of the error, see the
     log of the command file import.
A prerequisite of the Support Package Manager is that the Change and
Transport System (CTS) is configured correctly. For more detailed
information, read the online documentation available from Help -> SAP
Library -> mySAP Technology Components -> SAP Web Application Server ->
Change and Transport System .
A list of the most important SAP Notes for Online Correction Support
(OCS) is available in SAP Note 97620, which is updated regularly.
<b>Support Package Error Logfile:</b>
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order     : "SAPKIAF506"
1 ETP102 system              : "AFT"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.07" "640"
1 ETP198
4 ETW000 R3trans.exe version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 14.03.2007 - 10:08:21
4 ETW000 control file: D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 > #pid 1352 on AFTHOST (APServiceAFT)
4 ETW000 > import
4 ETW000 > buffersync=yes
4 ETW000 > file='D:\usr\sap\trans\data\RIAF506.SAP'
4 ETW000 > continuation='D:\usr\sap\trans\data\RIAF506_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 >
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: R3trans.exe -w D:\usr\sap\trans\tmp\SAPLIAF506.AFT D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'afthost' DBNAME = 'AFT' --- SYSTEM = 'AFT'.
4 ETW690 "0" "0"
4 ETW000 COMMIT (0).
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time   : 14.03.2007 - 10:08:21
4 ETW000 function    : IMPORT
4 ETW000 data file   : D:\usr\sap\trans\data\RIAF506.SAP
4 ETW000 Continuation: D:\usr\sap\trans\data\RIAF506_#.SAP
4 ETW000 buffersync : YES
4 ETW000 clients     : cascade
4 ETW000 repeatimport: YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimp.: NO
4 ETW000 c.s.i.      : NO
4 ETW000 l.s.m.      : VECTOR
4 ETW000 charsetadapt: YES
4 ETW000 def. charset: WEUROPEAN
4 ETW000 commit      : 100000
4 ETW000 table cache : dynamic
4 ETW000 INCLUDING   : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001, 100, 111, 300, 333
4 ETW000 Character set on this machine : ASCII (ISO 8859-1).
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 27.06.2006 at 10:22:59 by hm3adm
3 ETW709 "640 "
4 ETW000   with R3trans version: 13.02.06 - 15:46:42
4 ETW000 Source System = SUN on SPARC CPU with Solaris 2.2 on DBMS = DB6 --- DB2DBDFT = 'HM3' --- SYSTEM = 'HM3'.
4 ETW000
4 ETW000 language vector during export: DESFIJ3TM1PN
4 ETW000 lsm during export: ALL
4 ETW000 trfunction = D (patch transport)
4 ETW000 .--============--
4 ETW000 |                              RSCP - Error                            |
4 ETW000 | Error from:             Codepage handling (RSCP)                     |
4 ETW000 | code:    8 RSCPEIO      Some I/O error.                             |
4 ETW000 | dbrtab error 16 in rscpddio__direct_db_io                            |
4 ETW000 | module: rscpgdio no:   14 line: 1515                    T100: TS004 |
4 ETW000 | TSL01: F6H p3: XRTAB&0&16&UMGSETTING                    &           |
4 ETW000 |----
|
4 ETW000 | Error propagation from: Primary key table access (RTAB)              |
4 ETW000 | RTAB error      16                                                   |
4 ETW000 | table       UMGSETTING                                              |
4 ETW000 | db key      UNICONV                                                  |
4 ETW000 |----
|
4 ETW000 | Some OS information, which may or may not belong to this error:      |
4 ETW000 | errno     2 No such file or directory                               |
4 ETW000 `----
1AETW000 ===> HALT: GetDBMigrateCodePagesLangs fails with rc=8 (twconv.c:888) Please contact the SAP support.
4 ETW000 [dev trc     ,00000] Rollback Work (0)                                  90088 0.090088
4 ETW000 ROLLBACK (1470).
4 ETW000 End of Transport (0016).
4 ETW000 date&time: 14.03.2007 - 10:08:21
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time   : "20070314100821"
1 ETP111 exit code           : "16"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP101 transport order     : "SAPKIAF506"
1 ETP102 system              : "AFT"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.07" "640"
1 ETP198
4 ETW000 R3trans.exe version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 14.03.2007 - 10:09:37
4 ETW000 control file: D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 > #pid 3148 on AFTHOST (APServiceAFT)
4 ETW000 > import
4 ETW000 > buffersync=yes
4 ETW000 > file='D:\usr\sap\trans\data\RIAF506.SAP'
4 ETW000 > continuation='D:\usr\sap\trans\data\RIAF506_#.SAP'
4 ETW000 > client cascade yes
4 ETW000 > repeatimport=yes
4 ETW000 >
4 ETW000 > including 'NOTHING'
4 ETW000 R3trans was called as follows: R3trans.exe -w D:\usr\sap\trans\tmp\SAPLIAF506.AFT D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 Connected to DBMS = MSSQL --- SERVER = 'afthost' DBNAME = 'AFT' --- SYSTEM = 'AFT'.
4 ETW690 "0" "0"
4 ETW000 COMMIT (0).
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time   : 14.03.2007 - 10:09:38
4 ETW000 function    : IMPORT
4 ETW000 data file   : D:\usr\sap\trans\data\RIAF506.SAP
4 ETW000 Continuation: D:\usr\sap\trans\data\RIAF506_#.SAP
4 ETW000 buffersync : YES
4 ETW000 clients     : cascade
4 ETW000 repeatimport: YES (corresponds to unconditional mode 1)
4 ETW000 repeatclimp.: NO
4 ETW000 c.s.i.      : NO
4 ETW000 l.s.m.      : VECTOR
4 ETW000 charsetadapt: YES
4 ETW000 def. charset: WEUROPEAN
4 ETW000 commit      : 100000
4 ETW000 table cache : dynamic
4 ETW000 INCLUDING   : 'NOTHING'
4 ETW000
4 ETW000 rejected clients : 066
4 ETW000
4 ETW000 client cascade to: 000, 001, 100, 111, 300, 333
4 ETW000 Character set on this machine : ASCII (ISO 8859-1).
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 27.06.2006 at 10:22:59 by hm3adm
3 ETW709 "640 "
4 ETW000   with R3trans version: 13.02.06 - 15:46:42
4 ETW000 Source System = SUN on SPARC CPU with Solaris 2.2 on DBMS = DB6 --- DB2DBDFT = 'HM3' --- SYSTEM = 'HM3'.
4 ETW000
4 ETW000 language vector during export: DESFIJ3TM1PN
4 ETW000 lsm during export: ALL
4 ETW000 trfunction = D (patch transport)
4 ETW000 .--============--
4 ETW000 |                              RSCP - Error                            |
4 ETW000 | Error from:             Codepage handling (RSCP)                     |
4 ETW000 | code:    8 RSCPEIO      Some I/O error.                             |
4 ETW000 | dbrtab error 16 in rscpddio__direct_db_io                            |
4 ETW000 | module: rscpgdio no:   14 line: 1515                    T100: TS004 |
4 ETW000 | TSL01: F6H p3: XRTAB&0&16&UMGSETTING                    &           |
4 ETW000 |----
|
4 ETW000 | Error propagation from: Primary key table access (RTAB)              |
4 ETW000 | RTAB error      16                                                   |
4 ETW000 | table       UMGSETTING                                              |
4 ETW000 | db key      UNICONV                                                  |
4 ETW000 |----
|
4 ETW000 | Some OS information, which may or may not belong to this error:      |
4 ETW000 | errno     2 No such file or directory                               |
4 ETW000 `----
1AETW000 ===> HALT: GetDBMigrateCodePagesLangs fails with rc=8 (twconv.c:888) Please contact the SAP support.
4 ETW000 [dev trc     ,00000] Rollback Work (0)                                  88800 0.088800
4 ETW000 ROLLBACK (1470).
4 ETW000 End of Transport (0016).
4 ETW000 date&time: 14.03.2007 - 10:09:38
1 ETP176 IMPORT OF COMMANDFILE ONLY
1 ETP110 end date and time   : "20070314100938"
1 ETP111 exit code           : "16"
1 ETP199 ######################################
1 ETP199X######################################
1 ETP179 CREATE COFILE FROM DATAFILE
1 ETP101 transport order     : "SAPKIAF506"
1 ETP102 system              : "AFT"
1 ETP108 tp path             : "tp"
1 ETP109 version and release : "340.07" "640"
1 ETP198
4 ETW000 R3trans.exe version 6.09 (release 640 - 28.04.04 - 16:14:00).
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time   : 14.03.2007 - 12:08:33
4 ETW000 control file: D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 > #pid 4020 on AFTHOST (APServiceAFT)
4 ETW000 > createcofile
4 ETW000 > file='D:\usr\sap\trans\data\RIAF506.SAP'
4 ETW000 >
4 ETW000 R3trans was called as follows: R3trans.exe -w D:\usr\sap\trans\tmp\SAPLIAF506.AFT D:\usr\sap\trans\tmp\SAPKKIAF506.AFT
4 ETW000 trace at level 1 opened for a given file pointer
4 ETW000
4 ETW000 ================== STEP 1 =====================
4 ETW000 date&time   : 14.03.2007 - 12:08:34
4 ETW000 function    : CREATECOFILE
4 ETW000 data file   : D:\usr\sap\trans\data\RIAF506.SAP
4 ETW000 buffersync : NO
4 ETW000 clients     : default
4 ETW000 l.s.m.      : VECTOR
4 ETW000 commit      : -1
4 ETW000 table cache : dynamic
4 ETW000
4 ETW000 Character set on this machine : ASCII (ISO 8859-1).
4 ETW000 Character set on the data file: 2 byte unicode big endian.
4 ETW000 Data file is compressed with algorithm 'L'.
4 ETW000 Export was executed on 27.06.2006 at 10:22:59 by hm3adm
3 ETW709 "640 "
4 ETW000   with R3trans version: 13.02.06 - 15:46:42
4 ETW000 Source System = SUN on SPARC CPU with Solaris 2.2 on DBMS = DB6 --- DB2DBDFT = 'HM3' --- SYSTEM = 'HM3'.
4 ETW000
4 ETW000 language vector during export: DESFIJ3TM1PN
4 ETW000 lsm during export: ALL
4 ETW000 trfunction = D (patch transport)
3 ETW692 "SAPKIAF506          "
3 ETW708 "000"
3 ETW695 "D"
3 ETW694 "SAP       "
3 ETW693 "PAUSER      "
3 ETW696 "20060627"
3 ETW713 "P3A V500: patch 0006, CRT for SAPKH50010 - 12               "
3 ETW691 "CORRMERGMERGEINFO HM3 20060627 102016          "
3 ETW707 "CORRMERGMERGEINFO HM3 20060627 102016          "
3 ETW691 "LIMUCUAD/AFS/ARUN_SELSET_REORG                  "
3 ETW707 "R3TRPROG/AFS/ARUN_SELSET_REORG"
3 ETW691 "LIMUCUADPP_ORDER_PROGRESS                       "
3 ETW707 "R3TRPROGPP_ORDER_PROGRESS"
R3 Trans and tp Version
C:\Documents and Settings\aftadm>tp -v
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
This is tp version 340.07 (release 640)
tp information
kernel release                640
kernel make variant           640_REL
DBMS client library           SQL_Server_8.00
DBSL shared library version   640.00
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              Non-Unicode
compile time                  Jul 14 2004 19:38:55
update level                  0
patch number                  3
source id                     0.026
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
tp patch information
( 0.003) Restart after error in transport request independent step (note 686580)
( 0.003) Dd activation ends with returncode 8 although there's no error (note 69
4062)
dbsl patch information
( 0.001) MSSQL: TOP n for dynamic statements (note 699014)
( 0.003) MSSQL: R3load exports too few records (note 705088)
( 0.003) MSSQL: error handling on DBCON-connect (note 705674)
( 0.007) MSSQL: Row handles must all be released (note 719273)
( 0.016) MSSQL: BindInputParams: The parameter is invalid (note 731265)
( 0.017) MSSQL: SQL 2005 SNAC Support (note 734034)
( 0.022) MSSQL: Security issue (note 744948)
( 0.025) MSSQL: $DBCMD command (note 751269)
( 0.026) MSSQL: GetNextMsst1 error (note 754819)
C:\Documents and Settings\aftadm>r3trans -v
This is r3trans version 6.09 (release 640 - 28.04.04 - 16:14:00).
R3trans information
kernel release                640
kernel make variant           640_REL
DBMS client library           SQL_Server_8.00
DBSL shared library version   640.00
compiled on                   NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10
compilation mode              Non-Unicode
compile time                  Jul 14 2004 19:38:55
update level                  0
patch number                  19
source id                     0.026
supported environment
database (SAP, table SVERS)   610
                              620
                              630
                              640
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
R3trans patch information
( 0.001) Code pages patch packet 313233 (note 447519)
( 0.001) Code pages patch packet 34 (note 695907)
( 0.003) Deletion in language dependent table (note 337224)
( 0.009) Unicode: Core Dump in build_initrec, Modul dbntab (note 717717)
( 0.009) Avoid duplicate key errors due to scrap characters (note 718511)
( 0.009) Protect customer's table entries (note 530335)
( 0.011) Wrong error message: Value of key specification field (note 720329)
( 0.013) Code pages, languages and locales, packet 37 + 38 (note 447519)
( 0.013) Code pages, languages and locales, packet 37 + 38 (note 722638)
( 0.019) Code pages patch packet 40 (NT) (note 447519)
( 0.019) Code pages patch packet 40 (NT) (note 447519)
dbsl patch information
( 0.001) MSSQL: TOP n for dynamic statements (note 699014)
( 0.003) MSSQL: R3load exports too few records (note 705088)
( 0.003) MSSQL: error handling on DBCON-connect (note 705674)
( 0.007) MSSQL: Row handles must all be released (note 719273)
( 0.016) MSSQL: BindInputParams: The parameter is invalid (note 731265)
( 0.017) MSSQL: SQL 2005 SNAC Support (note 734034)
( 0.022) MSSQL: Security issue (note 744948)
( 0.025) MSSQL: $DBCMD command (note 751269)
( 0.026) MSSQL: GetNextMsst1 error (note 754819)
Thanks in advance

Hello Ismail
Update your versions of TP and R3trans and the SAP Kernal and retry the import.
The versions you have are from 2004.
Thanks
Kenny

On save as: Unexpected and unrecoverable problem has occurred. Photoshop will now exit. (Mac 10.7.3)

Hello,
We are working on Macinthosh intel - Mac Pro Intel Xeon september 2007, with MacOs 10.7.3.
After trying to install the beta version of Photoshop CS6, we got serious problems.
- The CS5 Photoshop and Acrobat 9 is not working anymore.
When we want to "save as…", both application will crash.
When we do "save as weboptimized", un error says that the file already exists.
We did not manage to install the CS6 Photoshop beta neither.
I tried EVERYTHING supposed to do in other forums and in the adobe forums, like:
- latest version of AdobeApplication Manager
- Adobe cleaner tool
- Adobe support advisor
- cleaning manually everything on the disk which containes CS6
- Reparing Autorisation
- Trying to reinstall CS5 (but without issue
- trash prefs
- deactivate and reactivate PHotoshop
and some others…
When trying to "save as" or save as weboptimized…", the following errors appears:
The operation could not be completed.
An unexpected and unrecoverable problem has occurred. Photoshop will now exit.
When trying to "save as weboptimized" the following error appears:
A file or directory already exists with the same name.
When exporting or "save as" in Acrobat:
Acrobat is blocked, everything in the application menu is turned gray but there is not open window.
I have to exit with "esc+Alt+Command"
All this problems occured after installation of Photoshop Beta CS6, which could not be completed because of some more errors causing a licence conflict with CS5.
We were also trying the Adobe support advisor, we got the following error massage:
Exit Code: 16
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW039 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 0 warning(s)
ERROR: DW039: Failed to load deployment File
AND
Exit Code: 7
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW013 ... WARNING: DW017 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s), 1 warning(s)
WARNING: DW017: PayloadPolicyNode.SetAction: IN payload {463D65D7-CD43-4FAC-A6C7-7D24CB5DB93B} Adobe Media Player 1.8.0.0 is required by {7DFEBBA4-81E1-425B-BBAA-06E9E5BBD97E} Adobe Photoshop CS5 Core 12.0.0.0 but isn't free. Reason: Language not supported
ERROR: DW013: Unable to locate volume for path. Please verify that path [UserDocuments] is a valid path. Please ensure that if any intermediate directories exist, they are valid directories and not files/symlinks
Here is the content of the Crash Report:
Process:
Adobe Photoshop CS5 [1403]
Path:
/Applications/Adobe Photoshop CS5/Adobe Photoshop CS5.app/Contents/MacOS/Adobe Photoshop CS5
Identifier:
com.adobe.Photoshop
Version:
12.0.4 (12.0.4x20110407.r.1265] [12.0.4)
Code Type:
X86-64 (Native)
Parent Process: launchd [299]
Date/Time:
2012-04-17 10:10:50.329 +0200
OS Version:
Mac OS X 10.7.3 (11D50)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
objc[1403]: garbage collection is OFF
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib
0x00007fff86d78ce2 __pthread_kill + 10
1   libsystem_c.dylib
0x00007fff90a0c7d2 pthread_kill + 95
2   libsystem_c.dylib
0x00007fff909fda7a abort + 143
3   com.adobe.Photoshop
0x00000001002369eb 0x100000000 + 2320875
4   libc++abi.dylib
0x00007fff897d8001 safe_handler_caller(void (*)()) + 11
5   libc++abi.dylib
0x00007fff897d7ff6 __cxxabiv1::__terminate(void (*)()) + 9
6   libc++abi.dylib
0x00007fff897d8346 __cxa_call_terminate + 59
7   libc++abi.dylib
0x00007fff897d87c3 __gxx_personality_v0 + 207
8   libunwind.dylib
0x00007fff8a21f4c6 unwind_phase2 + 160
9   libunwind.dylib
0x00007fff8a21e96e _Unwind_RaiseException + 218
10 com.apple.FinderKit
0x00007fff8b3a2b64 -[FI_TColumnViewController closeTarget] + 243
11 com.apple.FinderKit
0x00007fff8b3de1d0 -[FIFinderViewGutsController destroyBrowserView] + 238
12 com.apple.FinderKit
0x00007fff8b3dbdcc -[FIFinderViewGutsController prepareToHide] + 369
13 com.apple.FinderKit
0x00007fff8b3dbee4 -[FIFinderViewGutsController setExpanded:] + 44
14 com.apple.FinderKit
0x00007fff8b3e40ab -[FIFinderView viewWillMoveToWindow:] + 265
15 com.apple.AppKit
0x00007fff8c5b9e31 -[NSView _setWindow:] + 238
16 com.apple.AppKit
0x00007fff8c4e6c08 __NSViewRecursionHelper + 25
17 com.apple.CoreFoundation
0x00007fff8fbecea4 CFArrayApplyFunction + 68
18 com.apple.AppKit
0x00007fff8c5ba766 -[NSView _setWindow:] + 2595
19 com.apple.AppKit
0x00007fff8c4e6c08 __NSViewRecursionHelper + 25
20 com.apple.CoreFoundation
0x00007fff8fbecea4 CFArrayApplyFunction + 68
21 com.apple.AppKit
0x00007fff8c5ba766 -[NSView _setWindow:] + 2595
22 com.apple.AppKit
0x00007fff8c4e6c08 __NSViewRecursionHelper + 25
23 com.apple.CoreFoundation
0x00007fff8fbecea4 CFArrayApplyFunction + 68
24 com.apple.AppKit
0x00007fff8c5ba766 -[NSView _setWindow:] + 2595
25 com.apple.AppKit
0x00007fff8c4e6c08 __NSViewRecursionHelper + 25
26 com.apple.CoreFoundation
0x00007fff8fbecea4 CFArrayApplyFunction + 68
27 com.apple.AppKit
0x00007fff8c5ba766 -[NSView _setWindow:] + 2595
28 com.apple.AppKit
0x00007fff8c6dfb57 -[NSWindow dealloc] + 1262
29 com.apple.AppKit
0x00007fff8c9e34f4 -[NSSavePanel dealloc] + 612
30 com.apple.AppKit
0x00007fff8c4e0145 -[NSWindow release] + 535
31 libobjc.A.dylib
0x00007fff897ed03c (anonymous namespace)::AutoreleasePoolPage::pop(void*) + 434
32 com.apple.CoreFoundation
0x00007fff8fbecb05 _CFAutoreleasePoolPop + 37
33 com.apple.Foundation
0x00007fff8423a51d -[NSAutoreleasePool release] + 154
34 com.adobe.Photoshop
0x00000001012f2d2e AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16869522
35 com.adobe.Photoshop
0x00000001000824f8 0x100000000 + 533752
36 com.adobe.Photoshop
0x0000000100c3243c AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9789344
37 com.adobe.Photoshop
0x0000000100080e25 0x100000000 + 527909
38 com.adobe.Photoshop
0x0000000100c327e2 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 9790278
39 com.adobe.Photoshop
0x00000001004ca733 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 2024087
40 com.adobe.Photoshop
0x0000000100074b6f 0x100000000 + 478063
41 com.adobe.Photoshop
0x00000001000711ba 0x100000000 + 463290
42 com.adobe.Photoshop
0x00000001000665d3 0x100000000 + 419283
43 com.adobe.Photoshop
0x0000000100066696 0x100000000 + 419478
44 com.adobe.Photoshop
0x00000001012e1ef4 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16800344
45 com.apple.AppKit
0x00007fff8c4a31f2 -[NSApplication run] + 555
46 com.adobe.Photoshop
0x00000001012e04a4 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16793608
47 com.adobe.Photoshop
0x00000001012e0f01 AWS_CUI_GetVersionComments(OpaqueWindowPtr*, adobe::q::QDocument&, adobe::q::QString&, adobe::q::QAttributeList&, adobe::q::QDocument*, adobe::q::QProject*, long) + 16796261
48 com.adobe.Photoshop
0x00000001000682e6 0x100000000 + 426726
49 com.adobe.Photoshop
0x00000001002371f1 0x100000000 + 2322929
50 com.adobe.Photoshop
0x0000000100237281 0x100000000 + 2323073
51 com.adobe.Photoshop
0x00000001000022f4 0x100000000 + 8948
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib
0x00007fff86d797e6 kevent + 10
1   libdispatch.dylib
0x00007fff84b045be _dispatch_mgr_invoke + 923
2   libdispatch.dylib
0x00007fff84b0314e _dispatch_mgr_thread + 54
Thread 2:
0   libsystem_kernel.dylib
0x00007fff86d79192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff90a0c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff90a0db85 start_wqthread + 13
Thread 3:
0   libsystem_kernel.dylib
0x00007fff86d79192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff90a0c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff90a0db85 start_wqthread + 13
Thread 4:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.amt.services
0x0000000108723c53 AMTConditionLock::LockWhenCondition(int) + 37
3   com.adobe.amt.services
0x000000010871ccce _AMTThreadedPCDService::PCDThreadWorker(_AMTThreadedPCDService*) + 92
4   com.adobe.amt.services
0x0000000108723cbe AMTThread::Worker(void*) + 28
5   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
6   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 5:
0   libsystem_kernel.dylib
0x00007fff86d79192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff90a0c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff90a0db85 start_wqthread + 13
Thread 6:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 7:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 8:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 9:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 10:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 11:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 12:
0   libsystem_kernel.dylib
0x00007fff86d776ce semaphore_timedwait_trap + 10
1   com.apple.CoreServices.CarbonCore
0x00007fff8761e3be MPWaitOnSemaphore + 77
2   MultiProcessor Support
0x0000000110a00b93 ThreadFunction(void*) + 69
3   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
4   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
5   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 13:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 14:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 15:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 16:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 17:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 18:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 19:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   AdobeACE
0x000000010598b18d 0x105951000 + 237965
6   AdobeACE
0x000000010598ab3a 0x105951000 + 236346
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 20:
0   libsystem_kernel.dylib
0x00007fff86d78e42 __semwait_signal + 10
1   libsystem_c.dylib
0x00007fff909c0dea nanosleep + 164
2   com.adobe.PSAutomate
0x00000001166dbe4b ScObjects::Thread::sleep(unsigned int) + 59
3   com.adobe.PSAutomate
0x00000001166bdd83 ScObjects::BridgeTalkThread::run() + 163
4   com.adobe.PSAutomate
0x00000001166dbf46 ScObjects::Thread::go(void*) + 166
5   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
6   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 21:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 22:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 23:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 24:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 25:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 26:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 27:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 28:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.adobe.adobeswfl
0x000000012dbb289d APXGetHostAPI + 2465805
3   com.adobe.adobeswfl
0x000000012d96b5e9 APXGetHostAPI + 77145
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 29:
0   libsystem_kernel.dylib
0x00007fff86d7767a mach_msg_trap + 10
1   libsystem_kernel.dylib
0x00007fff86d76d71 mach_msg + 73
2   com.apple.CoreFoundation
0x00007fff8fbeb6fc __CFRunLoopServiceMachPort + 188
3   com.apple.CoreFoundation
0x00007fff8fbf3e64 __CFRunLoopRun + 1204
4   com.apple.CoreFoundation
0x00007fff8fbf3676 CFRunLoopRunSpecific + 230
5   com.apple.CoreMediaIO
0x00007fff90148541 CMIO::DAL::RunLoop::OwnThread(void*) + 159
6   com.apple.CoreMediaIO
0x00007fff9013e6b2 CAPThread::Entry(CAPThread*) + 98
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 30:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e2a6 _pthread_cond_wait + 890
2   com.adobe.adobeswfl
0x000000012dbb2869 APXGetHostAPI + 2465753
3   com.adobe.adobeswfl
0x000000012dbcf0ec APXGetHostAPI + 2582620
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 31:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e2a6 _pthread_cond_wait + 890
2   com.adobe.adobeswfl
0x000000012dbb2869 APXGetHostAPI + 2465753
3   com.adobe.adobeswfl
0x000000012dd4ce6f APXGetHostAPI + 4146655
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 32:
0   libsystem_kernel.dylib
0x00007fff86d78d7a __recvfrom + 10
1   ServiceManager-Launcher.dylib
0x0000000119885982 Invoke + 54020
2   ServiceManager-Launcher.dylib
0x0000000119884adf Invoke + 50273
3   ServiceManager-Launcher.dylib
0x0000000119883b26 Invoke + 46248
4   ServiceManager-Launcher.dylib
0x0000000119883b81 Invoke + 46339
5   ServiceManager-Launcher.dylib
0x0000000119883c02 Invoke + 46468
6   ServiceManager-Launcher.dylib
0x000000011987e30d Invoke + 23695
7   ServiceManager-Launcher.dylib
0x000000011987e4a6 Invoke + 24104
8   ServiceManager-Launcher.dylib
0x000000011987ef2f Invoke + 26801
9   ServiceManager-Launcher.dylib
0x000000011987f01d Invoke + 27039
10 ServiceManager-Launcher.dylib
0x000000011988231f Invoke + 40097
11 ServiceManager-Launcher.dylib
0x00000001198825c5 Invoke + 40775
12 ServiceManager-Launcher.dylib
0x0000000119882b84 Invoke + 42246
13 ServiceManager-Launcher.dylib
0x0000000119882d71 Invoke + 42739
14 ServiceManager-Launcher.dylib
0x0000000119874daf Login + 1773
15 ServiceManager-Launcher.dylib
0x0000000119876295 Login + 7123
16 ServiceManager-Launcher.dylib
0x00000001198832a8 Invoke + 44074
17 ServiceManager-Launcher.dylib
0x00000001198856c1 Invoke + 53315
18 libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
19 libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 33:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e2a6 _pthread_cond_wait + 890
2   com.adobe.adobeswfl
0x000000012dbb2869 APXGetHostAPI + 2465753
3   com.adobe.adobeswfl
0x000000012dbcf0ec APXGetHostAPI + 2582620
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 34:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e2a6 _pthread_cond_wait + 890
2   com.adobe.adobeswfl
0x000000012dbb2869 APXGetHostAPI + 2465753
3   com.adobe.adobeswfl
0x000000012dd4ce6f APXGetHostAPI + 4146655
4   com.adobe.adobeswfl
0x000000012dbb29b1 APXGetHostAPI + 2466081
5   com.adobe.adobeswfl
0x000000012dbb2d1a APXGetHostAPI + 2466954
6   com.adobe.adobeswfl
0x000000012dbb2e49 APXGetHostAPI + 2467257
7   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
8   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 35:
0   libsystem_kernel.dylib
0x00007fff86d776b6 semaphore_wait_trap + 10
1   com.adobe.CameraRaw
0x00000001279ec791 EntryFM + 2523937
2   com.adobe.CameraRaw
0x0000000127a1eaa3 EntryFM + 2729523
3   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
4   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 36:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   com.adobe.CameraRaw
0x00000001276e86c9 0x12749b000 + 2414281
6   com.adobe.CameraRaw
0x00000001276e7920 0x12749b000 + 2410784
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 37:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   com.adobe.CameraRaw
0x00000001276e86c9 0x12749b000 + 2414281
6   com.adobe.CameraRaw
0x00000001276e7920 0x12749b000 + 2410784
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 38:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   com.adobe.CameraRaw
0x00000001276e86c9 0x12749b000 + 2414281
6   com.adobe.CameraRaw
0x00000001276e7920 0x12749b000 + 2410784
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13
Thread 39:
0   libsystem_kernel.dylib
0x00007fff86d78bca __psynch_cvwait + 10
1   libsystem_c.dylib
0x00007fff90a0e274 _pthread_cond_wait + 840
2   com.apple.CoreServices.CarbonCore
0x00007fff87646bae TSWaitOnCondition + 106
3   com.apple.CoreServices.CarbonCore
0x00007fff875d928a TSWaitOnConditionTimedRelative + 127
4   com.apple.CoreServices.CarbonCore
0x00007fff8761dfd1 MPWaitOnQueue + 181
5   com.adobe.CameraRaw
0x00000001276e86c9 0x12749b000 + 2414281
6   com.adobe.CameraRaw
0x00000001276e7920 0x12749b000 + 2410784
7   com.apple.CoreServices.CarbonCore
0x00007fff8761ee36 PrivateMPEntryPoint + 58
8   libsystem_c.dylib
0x00007fff90a0a8bf _pthread_start + 335
9   libsystem_c.dylib
0x00007fff90a0db75 thread_start + 13

Hi again,
We found the solution. I trie to give some details, if some other folks have a similar problem, perhaps they can find their solution with everything discussed in this topic.
All this was not working, after trying it several times:
     Disk Utility> Repair Disk & Repair Permissions
     Cocktail OSX (clear all caches)
     Reboot and test
     delete all printers
     then look for a CS6 cleaner like http://www.adobe.com/support/contact/cscleanertool.html
     rebuild diskstructure and filestructure with several utilities like Techtool, Onyx.
We could not uninstall the complete Photoshop cs5 only, because in case of uninstalling the whole Mastercollection, this is much to much work to reinstall all of the extension from Dreamweaver which have to be activated and installed one by one.
What has been working is:
      TRY a New User Account (to rule out User preference/settings) !!!
So this gave us un idea:
Compare the library of both USER-ACCOUNTS : "ALICE" and the new one we called "TEST".
Then we RENAMED the following folders in the /USER/LIBRARY: "Caches", "Recent Servers", "Saved Application State" and crated a new folder with the same name (we deleted it after, in case there will be some problems to restore the old ones)
We put all the INVISIBLE FILES and FOLDERS present in the USER folder which names are beginning with a .dot, like .filename (e.g.: ".adobe", ".bash_history", ".BridgeCache", etc.) into another folder which we are going to delete later on.
Finally we deleted all files "suspected" not to be there in the ALICE user account, in comparision to the TEST USER ACCOUNT.
And "miracle": Everything is working again, after 2 days of searching…
Thanks to everyone of you.
Best regards,
Alice

I accidently changed my language and I can't get it back to English!

Please help!

''david.abel wrote:''
On the Firefox home page, the Arabic language has suddenly started to appear
Is the language for the menus and other user interface elements still English? If so,
# Click the ≡ Menu Button and choose Preferences.
# Click the Content icon.
# Below Languages, click the Choose button.
# Make sure a specific variant of English like ''en-us'' is at the top, followed by ''en''. Remove any unwanted languages as well.
[[Settings for fonts, languages, pop-ups, images and JavaScript|Settings for fonts, languages and pop-ups]]
''david.abel wrote:''
Also, my browser history has started to take up part of the screen.
I don't know what you mean by that. Please attach a screenshot.
* [[How do I create a screenshot of my problem?]]

Interactive form in Japanese language - baseline shift problem

Dear All,
I have a big problem with interactive forms. I developed a PO form for a Japanese company in English. When I transate it and use Kanji characters in the translation the baseline of these characters is about one line below where they should be. I use Arial fonts at the form development and the ADS changes it to MS Mincho or MSP Gothic. These two character set was also installed to the ADS font directory. Is it possible to use one form for the English and Japanese version of the form or I have to develop another form to the Japanese form and set the baseline of all the characters? Does anybody have experience in this issue? Has anybody developed PDF-based form in Japanese language?
BR,
Peter
Moderator Message: Pleae post your questions in the right forum. In this case: .
Edited by: kishan P on Nov 8, 2010 9:42 AM

Yes I did.
I have written the code as given below. It is not working either. Can you please check my code.
DATA:
      FM_NAME TYPE RS38L_FNAM,
      FP_DOCPARAMS      TYPE SFPDOCPARAMS,
      FP_OUTPUTPARAMS   TYPE SFPOUTPUTPARAMS.
fp_outputparams-nodialog = 'X'.
fp_outputparams-getpdf = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
ie_outputparams = fp_outputparams
EXCEPTIONS
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
OTHERS = 5.
Get the name of the generated function module
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
EXPORTING
i_name = 'ZHR_APPT'
IMPORTING
e_funcname = fm_name.
Set form language and country (->form locale)
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
call the generated function module
CALL FUNCTION FM_NAME
    EXPORTING
      /1BCDWB/DOCPARAMS        = FP_DOCPARAMS
      T_HR                     = wa_emphr1
   IMPORTING
    /1BCDWB/FORMOUTPUT       =
    EXCEPTIONS
      USAGE_ERROR           = 1
      SYSTEM_ERROR          = 2
      INTERNAL_ERROR           = 3.
Thx,
John

WRT54G Language and conecting problem.

Similar Messages

Maybe you are looking for