WRT54G losing connection to the web

Hi!
I have a WRT54G router and it is driving me crazy.
It suddenly stopped connecting my computer to the internet while it still works fine with my phone.
When I diagnose the issue I get the following message
Policy Provider: Windows Firewall
Filter Name: Query User
I googled it and found the solution sugested here: https://store.opendns.com/setup/device/windows-vista/
However, that did not help and I have found that unplugging the router for some time helps, but only for a few days, then the problem occurs again.
Any ideas on what I can do to fix this?
Thanks
The Imbecile

On the bottom it would should say WRT54G version 1 or WRT54G version 2, etc. If it just says WRT54G with no version number then it is version 1.
Linksys E4200 Ver.1.0.05 (Build 7)

Similar Messages

WRT54G v4 keeps losing connection to the internet

My WRT54G version 4 keeps losing connection to the internet. I've been on the phone w/ customer service so many times that the last time I think they gave up because after putting me on hold they never got back on the phone! :-)
Anyway one pattern I am seeing is that the router loses connection to the internet within two or three hours after I disconnect from the Cisco VPN and shut down my work PC. Has anyone else seen something like this?
-Frank

I found that Linksys EasyLink Advisor is a needless program that ultimately downgrades your router from a good piece of technology to a problematic pile of junk. So, therefore, try uninstalling Linksys EasyLink Advisor to get your good, solid hardware back. All you need to do to in order to get your router to work is plug it into an outlet, plug your Internet connection into the router, and then connect your router to your computer. It should then work without software (i.e., LELA) complicating it up.
Now, if you feel the need to set up an SSID or security, which I highly suggest, type 192.168.1.1 into your web browser. Leave the user name blank, and type admin as the password. Go to the Wireless tab and type something in as the SSID. It could be anything, just as long as it isn't linksys. Click on the Wireless Security sub-tab. Select WEP as the security mode with a WEP encryption of "64 bits 10 hex digits". Now, in Key 1, you need to type in a 10-digit password of numbers 0-9 and letters A-F (I believe). I suggest you use your phone number since that is very convenient in this instance.
Hopefully what I suggested in the first paragraph resolves your problem. If not, I suppose you could ignore the second paragraph if you feel the need to reinstall LELA. *shudders*
Message Edited by Pineconn on 06-24-2008 01:21 AM

Connection from the web server to the database which is situated in another machine.

Thanks for the reply.
I need to know, whether there shold be a physical connection between the web server and database machine? or can we connect to the database machine through the web, if the database machine has a domain name? if there is a physical connection, we can use the jdbc/odbc connection. but if we are connecting through the web, how can I estblish the connection using a JDBC/ ODBC connection?
Regards,
George

As long as there's a network connection between the two machines, you should be able to make the connection. I'm not sure what the difference between a 'direct connection' and a 'connection through the web' is-- are you actually running a network cable from one machine to another?
When you cannot make the connection, are you able to do a 'tnsping' on the target database?
When you say 'connecting through the web', is it possible that you're going through a firewall? If so, the firewall may be blocking the ports you need to communicate on.
Justin Cave
ODBC Development

I can no longer connect to the web

I've got an iPad 2, about 3 years old and I can no longer connect to the web. I do get e-mails, but they come when they feel like it. I don't have trouble getting on the web on my iMac. Thanks for your help and please answer as you would to any neophyte. Cheers

Are you properly connected to WiFi?
Is your iMac using the same WiFi?
What happens when you try to reference a WebSite?

Firefox was working on my new iMac but then, after switching on recently, won't connect to the web – whereas Safari has no problem.

===
Hi
I bought an iMac a week ago and installed Firefox via Safari. It worked fine for a while but, after a recently switching on, it won't connect to the web whereas Safari has no problems.
I've tried following the Firefox Help, looking into the iMac firewall, but still no luck.
I've no idea whether related or not but yesterday I had a system glitch where the iMac stated no wi-fi was installed and only connected via a physical lead to my house router. Also, there was no sound output via Safari. However, after booting up today all seems well – apart from Firefox still not working. It loads the start page but can't access the web.
I have Little Snitch running, and wonder if that's the culprit... but it's working fine with Safari, seemingly.
(Finally, how do I stop a dialogue box appearing on start-up saying that "To open “X” you need a Java runtime. Would you like to install one now?)
Any ideas anyone?
Cheers
Rob / Sheffield / UK
===

On the wireless networks that your Mac has had trouble connecting to, do you know which Wireless Security type (WEP, WPA, or WPA2) is being used?
If it is WEP, one of the problems is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP. In order to make things easier, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling the use of simple easy to remember WEP password rather than lengthy HEX keys. The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a non-Apple client and vice versa. You may find the following Apple Support article helpful.

The ITS could not connect to the Web Application Server or the R/3 System

Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advance

Hello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar

ITS could not connect to the Web Application Server or the R/3 System

ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
Tim

Hi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter

Connecting to the web via wireless router trouble

Hi,
I have had a Mac Book Pro, OX 10.8.4 for a couple of months. Until about 10 days ago I had no problem connecting to the web through a wireless router. Also connect via iPad and iPhone through the same router without any problems, both are fast, much much faster then the mac book which can't seem to fully open a page if it connects at all.
There are 2 things that I think this might be due to.
I had an app update reminder for OX which I installed and about the same time I installed a Java runtime thing. my work from home connection needs it but it didn't work.
Does anyone know if either of these things might be the reason for the problem and if so what I need to do to resolve the issue?

Allow me to add to this...
I'm now on my third mini (Core Duo). To their credit, the folks at the Apple Store (Towson, MD) have been very kind -- they took the second mini back without even testing it and issued me the third.
Here I sit, with the Mini six inches from the Airport base station, and the signal is varying from 1 to 3 bars. My Powerbook, nearby, is getting full signal (as it should).
Just got off the phone with the manager. He's clearly sympathetic, but he has asked me to bring it back in for testing.
I'm about as hardcore an Apple head as they come -- in fact, I had a letter to the editor published last week condemning Baltimore County schools for dropping Macs. I kept an entire art department at a major magazine from switching to PCs several years ago. I've been responsible for sending tens of thousands of dollars to Cupertino over the past decade.
I really hope Apple corporate does the right thing.

My MacBook Pro will not open any application or program that requires internet, even though I am connected to the web.

My MacBook Pro will not open any app or program that requires Internet, even though I am connected to the web. I recently installed Norton AntiVirus and think it may have changed a setting that I couldn't find. I uninstalled Norton and it didn't help. Every time I open Safari, iTunes or any other program that tries to connect to the Internet, it crashes. Strangely enough, Skype still works, but nothing else.
I have OSx 10.6.8.
I have tried erasing plists, and all the standard troubleshooting, ie resetting modem, restarting computer, reloading Safari from disk.
Any help would be greatly appreciated. Thank you in advance.

Change your router channel. Sometimes this is all you will have to do.
Power cycling the router. Read the router's user manual or contact their tech support for instructions.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
Other resources to check into:
Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
Netspot
How to diagnose and resolve Wi-Fi slow-downs
Pv6 troubleshooting
Mac OS X 10.6 Help: Solving problems with connecting to the Internet
What Affects Wireless Internet?
Solutions for connecting to the Internet, setting up a small network, and troubleshooting
I uninstalled Norton and it didn't help.
To properly uninstall Norton software follow these instructions - Locate Symantic Solutions folder inside the Applications folder at the root level of your HD, launch the Symantec Uninstaller application, select the Symantec AntiVirus Corporate, Norton AntiVirus & Norton AntiVirus Auto-Protect entries and click the Uninstall button.
Confirm your decision when prompted and then enter your administrator password in the space provided.
Retart your computer & Norton should be gone for good.
If the above does not work, download a copy of Symantec’s RemoveSymantecMacFiles removal utility. This utility will launch Terminal & remove the Norton components.

Sorry if tis is naive. I have just bought my first iPad Retina Display. I have WiFi at home but it has taken ages for me to connect as I needed all sorts of codes, passwords, detauils etc. How does one connect to the web (Google) when one is out and a

Sorry if this is a bit naive. I have just bought my first iPad (Retina Display). I have WiFi at home but it has taken me ages to get on-line as I needed all sorts of codes, passwords, numbers etc.
How does one connect to the web (Google) when one is out and about?
Thanks

haha, You're welcome
Maybe these links will be useful
ipad manual/user guide
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf
ipad support page
http://www.apple.com/support/ipad/
ipad assistant
http://www.apple.com/support/ipad/assistant/

Sony Ericsson K800i and MacBook... How can I can connect to the web?

Hi guys,
I've recently bought a new K800i Sony Ericsson. I set up bluetooth with my MacBook and everything's ok, but... I cannot connect to the web with my MacBook via K800i as a modem. Do you have any suggestions how to deal with the problem? I don't know... I mean special scripts, settings, and so on.
Thanks a lot

Do you have the downloaded Modem files from the website (or possibly cd that came with it)?
I bought a SE K750i this summer and it has the same ability, and I went and downloaded a bunch of stuff off the website as my product was an international one and the Manual that came with it was in French. So I got my modem file at the same time.
It doesn't show where you are located, but if you are in the USA and your phone is an international one as well (the i usually stands for that) then you would probably want to hit up the UK version of the Sony Ericsson Website to find any possible downloads for it.

When I try to connect to the web using the larest version of firefox, it tells me the Proxy Server is refusing connection. When I reinstall an earlier verion it seems to work fine!!! What's the Problem?

Downloaded Latest version 3 6.?? .12
Next time I tried to connect to the Web the Proxy server refuses connection & tells me to reconfigure my settings.
I reinstalled the older version, which worked OK, then uploaded the latest version again & it does the same thing when I log off & try to reconnect!

Other things that need attention, see http://www.mozilla.com/plugincheck/
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Shockwave Flash 10.0 r22
# Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

WRT54GS Not Connecting to the PC During Setup

WRT54GS Not Connecting to the PC During Setup
Someone please Help me!!
I Have a laptop im trying to set up wirelessly through this Router and having problems.
When following the setup disc it keeps coming up that it cant find the router although i have followed the instructions and have them connected via the network cable..
Any Help anyone.. please?
Louis R

What is the IP address you are getting on this PC? Check if you can ping to this router with its IP address (default IP: 192.168.1.1) if not then try resetting it for 1 min by pressing the reset button. Once you get the ping then you can try configuring the router.

I am unable to connect to the Web with Firefox, the firefox site displays on screen, yet I can connect on the same desktop computer to Internet explorer and Opera, what is preventing me from opening the firefox browser

I am unable to connect to the web on my desktop with Firefox 8, the program displays but will not connect to the Internet, Other browsers Internet Explorer and Opera do connect on the same machine. McAfee is not blocking it, virus checks detect no virus yet yesterday it worked perfectly

I tried what was suggested by starting in Safe Mode but the problem still exists. I am frustrated as I cannot connect to my Verizon Fios page. I can connect to the Internet with the Firefox Browser and can go to any web site except finding my Verizon Home page.

Issues with our SSL connection to the Web dispatcher

HI Alle,
I having issues with our SSL connection to the Web dispatcher with SAP Web AS. Below is the error in the log files form dev_webdisp:
Started service 80 for protocol HTTP on host "wdpeht1"(on all adapters) (processing timeout=120, keep_alive_timeout=30)
[Thr 368] =================================================
[Thr 368] = SSL Initialization on PC with Windows NT
[Thr 368] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 368]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 368]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 368] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 368] =   found SECUDIR environment variable
[Thr 368] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 368] * ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 368] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 4129 (0x00001021) = "The PSE does not exist"*
[Thr 368] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 368] ERROR in SSL_CTX_set_default_pse_by_name: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in ssl_set_pse: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in af_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in secsw_open_pse_or_extension: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
ERROR in sec_get_PSEtype: (4129/0x1021) The PSE does not exist : "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 368] << -
End of Secude-SSL Errorstack -
[Thr 368] * ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]*
[Thr 368]* ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 368] =================================================
[Thr 368] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR*
[Thr 368] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
[Thr 2128] IcmCreateWorkerThreads: created worker thread 0
Regards

Hi Olivier,
Thanks for replay,
The PSE does exist in my SEC "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" .
I did tried Again I get this error. I think I missing som parameter
= SSL Initialization on PC with Windows NT
[Thr 2292] =   (701_REL,Jan 28 2010,mt,ascii-uc,SAP_UC/size_t/void* = 16/64/64)
[Thr 2292]   profile param "ssl/ssl_lib" = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\sapcrypto.dll"
[Thr 2292]   profile param "ssl/server_pse" = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
           resulting Filename = "E:\usr\sap\WDP\W00\sec\SAPSSL.pse"
[Thr 2292] =   found SAPCRYPTOLIB 5.5.5C pl29 (Jan 30 2010) MT-safe
[Thr 2292] =   current UserID: WDPEHT1\SAPServiceWDP
[Thr 2292] =   found SECUDIR environment variable
[Thr 2292] =   using SECUDIR=E:\usr\sap\WDP\W00\sec
[Thr 2292] -*ERROR =>   secudessl_Create_SSL_CTX(): PSE "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" not found! [ssslsecu.c   1354]
[Thr 2292] secudessl_Create_SSL_CTX: SSL_CTX_set_default_pse_by_name() failed --
secude_error 1281 (0x00000501) = "open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned"*-
[Thr 2292] >> -
Begin of Secude-SSL Errorstack -
>>
[Thr 2292] -*ERROR in SSL_CTX_set_default_pse_by_name: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
-*ERROR in ssl_set_pse: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in af_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"*-
ERROR in secsw_open: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in secsw_open_pse_or_extension: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in sec_get_PSEtype: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_read_PSEFile: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
ERROR in aux_file2OctetString: (1281/0x0501) open("E:\usr\sap\WDP\W00\sec\SAPSSL.pse") returned : "Permission denied"
[Thr 2292] << -
End of Secude-SSL Errorstack -
[Thr 2292] *** ERROR => SapISSLAddCredential(): Error SSSLERR_PSE_ERROR trying to create SERVER Credential
        for "E:\usr\sap\WDP\W00\sec\SAPSSL.pse" [ssslxxi.c    2278]
[Thr 2292] *** ERROR => Initialization of SSL library failed -- NO SSL available!
[Thr 2292] =================================================
[Thr 2292] <<- ERROR: SapSSLInit(read_profile=1)==SSSLERR_PSE_ERROR
[Thr 2292] *** ERROR => IcmAddService: SapSSLInit (rc=-40): SSSLERR_PSE_ERROR [icxxserv.c   319]
Her is my profile parameter for https.
h6*#Https parameters for Web dispatcher E:\usr\sap\WDP\W00\sec
#icm/server_port_0 = PROT=HTTPS,PORT=443$$
DIR_INSTANCE = E:\usr\sap\WDP\W00\sec
ssl/ssl_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssl/server_pse = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
wdisp/ssl_cred = E:\usr\sap\WDP\W00\sec\SAPSSL.pse
ssf/ssfapi_lib = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
sec/libsapsecu = E:\usr\sap\WDP\W00\sec\sapcrypto.dll
ssf/name = SAPSECULIB
wdisp/ssl_encrypt = 0
icm/server_port_1=PROT=HTTPS, PORT=8400, TIMEOUT=120
###icm/server_port_1=PROT=HTTPS, PORT=44302, TIMEOUT=900 (old)
########icm/server_port_0 = PROT=HTTP,PORT=80, TIMEOUT=120
icm/HTTPS/verify_client=0
wdisp/add_client_protocol_header = true
wdisp/auto_refresh = 120
wdisp/max_servers = 100
wdisp/ssl_auth= 0
ms/https_port = 8400
wdisp/HTTP/use_pool_for_new_conn=1
wdisp/HTTPS/dest_logon_group = HTTPS
#wdisp/server_info_protocol = https
#wdisp/group_info_protocol = https
#wdisp/url_map_protocol = https
wdisp/ssl_ignore_host_mismatch = fals
icm/HTTPS/forward_ccert_as_header = true
icm/HTTPS/trust_client_with_issuer = CN = SAP CA,*
icm/HTTPS/trust_client_with_subject = CN = sapwebdisp,*h6
Regards

WRT54G losing connection to the web

Similar Messages

Maybe you are looking for