WRT54G No Internet via Wireless

I have a WRT54G ver3 wired to my desktop and everything works fine. I reset my router yesterday and now I cannot get internet on my Toshiba Satelite laptop via the wireless. If I hook up an ethernet cable it works. My laptop says I have connectivity, and signal strength is excellent on wireless. When I put the IP address in Explorer I see all the router settings. If I disable security, the internet works via wireless. What am I missing?

jasty u need to go to the comp which is hardwird to the router
and click on internet explorer and type 192.168.1.1 and u will get a username na passwd -
leave the username blank and password is admin and once u click oky u will get the linksys setup
and in the linksys setup screen u will find a tab called wireless click on that and click on the sub tab called advance wireless settings
where u can change the
beacon interval - 50
rts - 2304
ft - 2304
and once u save the settings it shuld work wirelessly

Similar Messages

WRT54G - no internet via wireless, though connection is established

Hello, I have run out of ideas for getting my wireless to work and I need help.
I am trying to setup my WRT54G v2 router to transmit my Verizon ADSL internet connection and for my laptop to have wireless internet.
Currently, the internet works if I connect straight to the Verizon (Westell) modem to my laptop. Internet also works when I connect from the Verizon (Westell) modem to the WRT54G and connect to the laptop with a CABLE.
However, If I unlpug the direct internet connection to my laptop, and try to surf the net wirelessly then my laptop will find the wireless network, and my laptop will be connected to the wireless connection on the WRT54G, however, it will not pull up any web pages... seemingly, the router and laptop have established a connection but no information is going between them that's of use to me...
I have updated the firmware and reset the modem. I've switched the LAN IP address to 192.168.2.1. Does anyone know why my wireless connection isn't working? How do I get it so that I can get on the internet with my laptop on a wireless connection, and not just the hard line? I really am at a loss, please help. THANK YOU!!!

Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If you are getting Ip - 192.168.1.X ...change the LAN Ip to 192.168.2.1 ....Power cycle for 3-4 minutes ...
Try going online
If still not working ...use Internet Connection type as PPPOE .... Use Username & Password provided by Service Provider ....
Click save settings....
Look for WAN IP address again under status page ....

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

Hi, this has worked for a few...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
Also, turn off IPv6:
System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
Or whatever Interface you use.

Can't connect to internet via wireless

I am unable to connect to the internet via wireless on a consistent basis I can ping my router every time though. When the internet works it seems to be completely random. I tried some fixes posted on the forums for problems similar to mine like, setting my default gateway and using open dns servers, but neither of those fixes seemed to help with my set up. Any ideas?
My wireless card uses the Ralink rt 2760 chipset. Thanks

What are the characteristics of the wireless networks to which you are trying to connect?
Are they managed or ad-hoc?
Are they WEP?
Are they WPA?
If the link is encrypted but the NIC isn't, the NIC will associate with the network and a ping will work, but any packet containing actual data (like a DHCP request, any TCP or UDP request, SNMP, etc... ) will fail.
As a quick test, if you have administrative rights to your access point, turn off WEP and WPA and see if you can connect. I advise you turn encryption back on when you are done with the experiment.

After ios5 upgrade cant get out to the internet via wireless, it wont get past our Smart Filter (web filter)

I just upgraded my 3GS to IOS5, and now at work when i am connected to our WiFi I can no longer get out to the internet.
A little back story on how it worked prior to ios5:
I would connect via wireless, and then load Safari and type in a webpage I wanted to go to. A pop up box would come up, to authenticate me on our Web filter server (Running Smartfilter), I woudl enter my regular Active Directory username and Password and boom, i could then surf to my hearts content.
After the upgrade, I connect to the wireless, load Safari, type in the webpage i want to go to, and the progress bar moves abotu 3mm and then stops, I never get the smart filter prompt.
I have tried a full reset on the phone, forget network, reset all network settings, I even tried putting in the IP address of the smart filter box as a proxy and still it doesnt work. I have gone to smartfilters website to see if anyone else has posted there, or if there was a clue as to why it doesnt work, but nothing so far.
anyone else having this problem? any ideas?
If it wasnt broken, why would apple mess with it! a LOT of companies run smartfilter as well as other web filters. I thought apple was trying to seduce corporate customers, and so far a lot of poeple are dissapointed that they cant get to the internet.
tha
nks in advance for any assistance.
j

I am having the same problem. The issue also occurs with Safari on Mac OS 10.7. I work for a school and I am sure that other schools are using smartfilter too.

I am having trouble connecting to my in-home internet via wireless router. It says it is connected, but when I try to open email, no connection is found. This also occurs for Safari and Facebook. I am connected by Charter Cable.

I am having trouble connecting to my in-home internet via my wireless router. The IPad says I'm connected to the router, but I am unable to receive email, Facebook and Safari. I run through Charter Cable. This only occurs on my IPad. My desktop works fine.

Although it may ultimately be necessary to perform a Factory Default Reset on the AirPort Extreme and start over with a new configution, we can first try to see if things will work with the existing settings on the device.
Push the reset button (if present) on the cable modem
Power off the modem by pulling the power cable
Remove the internal battery from the modem (if easily accessible)
Power off the AirPort Extreme and every other device on the network....order is not important
Wait at least 20 minutes....longer is better
Re-install the battery in the modem if it was removed previously
Make sure that the Ethernet cable from the modem is connected to the WAN port (circle of dots icon) on the AirPort Extreme
Power up the modem and let it run 4-5 minutes buy itself
Power up the AirPort Extreme and let it run 4-5 minutes
Then power up each other network device one at a time about a minute apart
Check for a good Internet connection on the network with all devices
If still no luck, you will need to perfom a Factory Default Reset on the AirPort Extreme as follows:
Pull the power plug from the back of the AirPort Extreme
Hold in the reset button and keep holding it another 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
Release the reset button and allow 25-30 seconds for the AirPort Extreme to restart to a slow, blinking amber light
Then open AirPort Utility end reconfigure the AirPort Express again.

ITunes content not visible when connected to internet via wireless

I have been having problems with my Apple TV. It did not show any iTunes Store content. After some considerable attempts at reconfiguration, I finally restored to factory settings and I still could not connect to the internet via my airport extreme wireless network. I therefore ran an ethernet cable instead and all the itunes store content appeared and I was able to sync with my Macbook Pro. I then looked at the network configeration using the ethernet recorded the settings and took the cable out. Then reconnected using the wireless connection, initally it could not connect to the internet but then I went through the manual connection and set the settings using DCHP and it then connected but once again there is no iTunes store content, if I reconnect the iTune store content comes back as does the uTube and internet radio both of which also disappear if I try and go wireless. Any thoughts?

are you connecting to the same router for the ethernet and wireless connections?

Homehub 3 cannot get to Internet via Wireless

Just got BT Infinity today and everyting is great so long as I am attached via an ethernet cable.
Connecting my laptop via Wireless is frustrating. To try and diagnose this problem I have switched encryption off.The hub is set to all its defaults for IP Address ranges etc.
On the laptop I am using Windows XP SP3 and am letting Windows do the Wireless configuration.
The best I get is that it claims to be connected. IPCONFIG shows it has a valid IP address, correct subnet mask,correct DNS, and Default gateway. I check this with my other PC which is hard-wired to the router - and yes - it appears in the device list within the hub manager. So everything looks OK. EXCEPT, when I actually try to open a web page - bbc.co.uk for example in either Firefox or IE, it just sits there saying 'connecting to www.bbc.co...' or sometimes 'waiting for www.bbc.co.....'. I have also disabled the softwrae firewalls I had installed and anti-virus. So, I'm beginning to think I've got a dodgy router.
Has anyone seen this problem before? ie everything looks OK and connected, but you can't actually browse the web.
Steve
Solved!
Go to Solution.

I had connectivity problems with my XP sp3... The BT Desk software would come up with not connected then I had to go thru identifying the picture of the router I was using etc... eventually it would connect.
I removed the software and it's fine now.
The PC internal wireless card wouldn't work... PC world gave money back no probs.
The reason I knew it was the card that I had just bought was the 4 other Laptops/netbook/tablet connected all ok.
So for convenience I Installed the D-Link Dwa140 onto a spare USB port on the PC, and it was up and running in minutes.
As I say I was lucky knowing my router was ok by the fact the other machines worked.
Is there a chance you could ask your mates to come over with Netbook/laptop and try to connect to your wireless signal?
It'll help get evidence if you have to request a replacement HH3.
Edit I have posted in this thread http://community.bt.com/t5/BT-Infinity/My-wife-s-netbook-is-connected-to-infinity-but-wont-load-any/...
I mention it in case you want to have a look.... but I expect you've tried everything.... Even I notice down to removing encryption.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection, How do I use the airport express to connect a remote PC via ethernet cable and access the internet via wireless connection

Trying to connect my xbox to the airport express. Have wireless in home and do not have a ethernet point behind tv/xbox. How do I configure the airport express to connect to my wireless network and then the airport express can use its connection via ethernet to connect the xbox to the internet.

Is your AirPort Express Base Station (AX) a 802.11n model? If it is, you can reconfigure it as a wireless Ethernet bridge or ProxySTA. This would allow the AX to join another wireless network and have its Ethernet port enabled for wired clients, like the Xbox 360.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility.

Airport Express Installed Internet Via Wireless Conn Gone!?

Hello,
After installing and setting up my Airport Express (Via Airport Utility) I can't connect to the internet. The setup appeard to go well and said it's all ready to go.... Other computers in my house can connect the the router fine. But for some reason I can't connect. No errors are displayed, it just won't have it.
OS: XP
Router: NetGear

hmm I have g model but it does join a wireless network
(model a 1088 by the way)

Connecting the internet via wireless

Hi,
I have a four month old mac book pro and a linksys router with no password on it..
When I go to school or to my other house I can connect to wireless effortlessly but just lately when I am at home I cannot get on the internet. I have a full signal and it says I'm connected but safari says I'm not connected to the internet. I remember the girl on the phone did something about obtaining an ip automatically but I can't really remmeber
the network status says im connected but i have a self assigned ip address and may not be able to connect to internet
thanks for your help guys

Open System Preferences/Network and select Airport, click the TCP/IP button and check what's set for 'Configure IPv4 using'
It should say 'Using DHCP', if not select that and hit the 'Apply' button and see what it comes back with ?

Cannot get to internet via wireless wrt54gc

If I try to get from wired computer, all ok. from wireless laptop I can get only router's administration pages, but cannot pass to internet.
both computers connected simultaneously
pls help!

check if you have your ip address comfigured manually on the wireless laptop..
use your wireless computer
go to control panel and go to network connections
right-click on the wireless network connection icon and click properties..
look for internet protocol(tcp/ip) - highlight that and click on the properties button
set it to obtain IP address automatically and obtain DNS servers automatically..

Slow initial connection to internet via wireless router

Hi,
I have a D-Link Xtreme N 450 wireless router that I used with a MacBook Pro running 10.9.3. When I first open the computer, the internet quickly connects (I can surf, get email, etc), but after a few seconds it disconnects, searches for a wireless router, and then gives me the exclamation point in the wireless icon. It stays down for a 1-3 minutes, then mysteriously reconnects. I've looked everywhere for a solution and cannot seem to find one. I ran wireless diagnostics and got one error message that may be the problem - it says a nearby wireless router has the wrong country code and could be causing problems. But has anyone else had this issue or think they know of a potential solution?
Thanks!

am in the DFW area using Verizon Fios - I have a D-Link DIR-655 router and a 24" Imac running Mac OS X 10.5.1. I purchased the Apple Airport router thinking the problem with internet speed might be my router. This was not the case - every computer in the house was much slower using the Airport - so I returned it to my Apple store.
I have now switched off the bluetooth and airport on my Mac - it is hooked straight into the router and every day at about 6:00 it slows down to turtle speed while my other 2 laptops that are wireless in the house and much older - are lightening fast.
I have called Verizon and had them out - they say there are not enough people on Fios to create any traffic problems at certain times of the day - which I believe being that the Apple Imac is the only computer with the problem.
I have downloaded Firefox and have the exact same problem.
There has got to be some solution for this - my speed checks out very fast during this time - T2 speed for download and upload - I'm ready to throw this apple out the window.

Connect mac to internet via wireless airport

I have AT&T wireless, using NetGear Modem. My Mac Book drops a wireless connection when I am 2 feet away from the modem. Why? I need to be able to move from room to room and this is so frustrating.

For your WEP encryption, are you using a passphrase
or a hex key on the Linksys? If using a passphrase,
Macs have a "hard" time with these. If you prefer
WEP, I suggest that you use a 128-bit Hex key
instead. Better yet, switch to WPA.
I think that it is a hex key. I do have a password to access the wireless connection. If I switch to WPA, should I switich to WPA-personal, ot does it really matter which WPA it is? Thanks

Both iMac and powerbook can't connect to internet via Airport.

I have an iMac that is directly wired to an airport base station and a G4 powerbook that connects via a card. Neither can connect to the internet. The iMac is set up as follows:
Cable modem > ethernet cable to WAN port on AEBS > ethernet cable from AEBS to iMac.
The powerbook detects the base station and created its own network as soon as it did, yet still nothing. The first and third lights on the AEBS flash as to show activity and I have unplugged the modem to reset it multiple times.
I am completely confused as to what is going on. Can anyone please help?

If it helps any, I'm in the same boat. I've had an AEBS that has worked well until yesterday. Now, my Powerbook can't connect to the internet via wireless or ethernet (connected directly to the AEBS). My POwerbook CAN talk to my networked HD. To make things worse, my two Tivos (connected to the network via an Airport Express & WDS) CAN connect to the internet.
I'm totally confused. Since I can't connect to the internet when directly plugged into the AEBS, but can connect when I plug directly into the cable modem, I think I'm going to just buy a new AEBS...

WRT54G No Internet via Wireless

Similar Messages

Maybe you are looking for