WRT54G not compatible with Comcast PowerBoost

When I connect directly to the modem I get the boosted 15-16Mbps, but when I go through the router, WRT54G ver. 2 firmware v4.30.5 , I only get the standard 8Mbps.  Since it works directly through the modem, Comcast says it is the fault of Linksys.

I am wondering if the powerboost uses a jumbo frame that is dramatically larger than the WRT54G can handle. The fragmentizing and reassembly time may be limiting your  throughput. Try using an ethernet packet sniffer to see what the packet sizes are on the comcast side, and check your router specs for the max packet length, wihch may be changeable.
Douglas W. Goodall, Software Engineer
425 San Juanico
Santa Maria, CA 93455
(805) 928-2445

Similar Messages

  • WRT54G not compatible with Windows Vista?

    When I used to have Windows XP I found connecting to the router simple, and reliable.  However I just got a new computer with Windows Vista, and for some reason I can't seem to install the router anymore.  I tried inserting the Linksys CD and I followed all of the directions and it goes to check the router's status it brings up a page that tells me to right click my internet connections or something and my computer still doesn't find the router but connects to Realtek or something a long those lines.  Thanks for any help.
    Solved!
    Go to Solution.

    As you have got internet connection on your computer...you can try adjusting the wireless settings on your router...so that other laptops can connect to your router wirelessly.... 
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave username blank & in password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
    Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • IPad Air not compatible with NFL Mobile app?

    Hello Verizon and community -
    I recently added an iPad Air to my Verizon wireless account, the biggest reason being so I can watch NFL network via the NFL Mobile app through Verizon. Come to find out after some trial and error that the iPad air is not compatible with the free access to NFL network via the app? See "compatible devices" here:  https://www.verizonwireless.com/insiders-guide/inside/nfl/
    Seems other applie iPad devices are compatible, including the apple iPad mini, but no iPad air for some reason.
    I have a Galaxy s3 on my account as well.  When I download the app on that device and start it, I get a popup saying that I have access to the content for free and I am able to stream the NFL network with no problems.  When I download the app to my iPad and open it, I do not get the same notification of access to the content. It opens and runs fine but if I try to tap the button to watch NFL network, it asks me to sign in with my cable provider instead of streaming.
    I'm wondering if compatibility for the iPad Air will be added anytime soon?

    Seems like if they really wanted to cash in they'd jump on making it
    available for the Air, as it's one of the more spendy of the tabs they have
    available. But I suppose that'd be too easy
    Unfortunately it's Comcast around my area and they don't play nice with
    others.  Not on the list of compatible cable providers.  Do Verizon rep's
    look at these posts or is it just for community?

  • Mail app deleted and reinstall wont open, says not compatible with OSX

    i accindetally deleted my mail app and emptied the trash, when I tried to reinstall from the startup disk, it installs but wont open, saying that the version of mail is not compatible with the version of OSX (10.5.8)

    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
    There is no downloadable version of Mail.app - it comes with the operating system i.e. on your install disks.

  • I have Trend Micro antivirus for Windows 7, but I am being told it is not compatible with Mozilla 9.1, how do I get an older version or adapt?

    I am using a lap top, just reinstalled everything, and now have Firefox 9.1 and am being told it is not compatible with my antivirus, Trend Micro Titanium. I am running Windows 7.

    See:
    * http://community.trendmicro.com/t5/Home-and-Home-Office-Forum/Read-Me-Before-Posting-Titanium-Hotfixes/m-p/55632

  • I have installed Firefox4 to find it is not compatible with my version of OSX how do I get version 3.6 back or do I just give up and use Safari?

    I downloaded Version 4 and installed it. At no point did it say that it was not compatible with the version of OS X that I am running (10.4.11) now that it is installed it will not open but it has already up graded from 3.6 so I have lost the lot. How can I download a version of 3.6 so that I can use it again or should I just pack up and use Safari as all I can get from your site is version 4. HELP!!!

    Go to this link and find your language:
    http://www.mozilla.com/en-US/firefox/all-older.html

  • IPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers?

    iPod 4,1 will not update to iOS 7. I updated my iMac to 10.9.1 (maverick). Latest Numbers version on iMac is not compatible with Numbers on iPod. Ideas? Can I go back a version with Numbers? I downloaded old version of Numbers 2.0.1 from DVD but with both versions the 2.0.1 will not open.  So both versions are present but only the new version functions. I tried to drag the new version to the trash but the old version still runs error message and will not open. I did not try to restart with the new version in the trash.

    Maybe. See:
    Reverting to previous version of Numbers

  • I need to silently upgrade from 3.5 to 7 but get an error message after 7 install. Platform version 7.0 is not compatible with minVersion = 1.9.1

    I'm trying to silently upgrade my environment to FF 7. I've gotten the silent install working great, it puts in my Proxy Server info, reassigns the home page and all that. But, the last version we pushed out was FF 3.5. If a user had that on their PC and they run the FF7 install, they get weird messages when clicking on the icon.
    XULRunner: Error: Platform version '7.0' is not compatible with minVersion >= 1.9.1 maxVersion <=1.9.1
    Another message they get is:
    AutoConfigAlert:
    Netscape.cfg/AutoConfig failed. Error: pref failed: [Exception... "Component returned failure code: 0x8000ffff (NS_ERROR_UNEXPECTED) [nsIPrefBranch.setBoolPref]" nsresult: "0x8000ffff (NS_ERROR_UNEXPECTED)" location: "JS frame :: prefcalls.js :: pref :: line 70" data: no]
    This is on Windows XP

    Do you have other virtualization or security software that might protect .ini and possibly other files in the Firefox program folder (C:\Program Files\Mozilla Firefox\) and prevent Firefox from updating them properly?
    You need to do a clean reinstall.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 7.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • After update to 3.6.20, ERROR, platform version 1.9.2.18 not compatible with Min/Max v 1.9.2.20

    Win2000 Pro SP4. Been running FireFox for several years. Ver3.6.6 since 03/22/2011. Got a msg window in FireFox stating important security update available. ''(ADDED INFO: Checked System Requirements of update and then...)'' As usual, I clicked yes load it. A few moments later I got the message: "XULRunner Error:
    Platform version '1.9.2.18' is not compatible with
    minVersion>=1.9.2.20
    maxVersion<=1.9.2.20"
    That is it, NO MORE FIREFOX!!! How can I fix it and not loose any of my 'stuff'?

    You're welcome

  • Add management server: Setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0

    I want to add another management server to our existing SCOM environment. But whenever I run this setup on a new server I get stuck in the window for selecting the OperationsManager database. The database field stays blank and in the OpsMgrSetupWizard log
    there are lines that the setup version is not compatible with the database version. But I use the same installer as when I installed the other management servers a year ago.
    Maybe there is a newer setup installer? But I can't find it.
    [10:42:54]: Error:
    :Error:setup version: 7.0.9538.0 is not compatible with database version: 7.1.10226.0
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read returned true.  so far, this is OM DB, not an empty DB
    [10:42:54]: Debug:
    :Connection was not open.  We will try to open it.
    [10:42:54]: Debug:
    :SqlConnectionReady returned True.
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Info:
    :Info:isOMDatabase:  Read did not return true.  The MG is missing. This is not OM DB
    [10:42:54]: Info:
    :Info:Using DB command timeout = 1800 seconds.
    [10:42:54]: Always:
    :Azman store table not found in OperationsManagerDW table, assuming this is an not a valid OMDB for empty DB scenario.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.
    [10:42:54]: Info:
    :Info:DatabaseConfigurationPage: DB connection attempt completed.

    Never mind, found it!
    Apparently there was a newer version of SCOM setup in msdn and someone upgraded our existing SCOM environment. Downloaded the new setup, new report viewer controls and a System
    CLR Types for Microsoft® SQL Server® 2012 and now it works!! 

  • I'm getting this error statement: XULRUNNER error: platform version 6.0.2 is not compatible with min etc max etc6.0.1 - what is this about and how can it be corrected?

    This is what I think may have happened. The other day, Thursday Sept 8th, I shut down my pc in the middle of a Firefox upgrade. Now when I try to access Firefox on my pc, I get this error message:
    XULRUNNER Error: Platform version '6.0.2 is not compatible with min Version >= 6.0.1 max Version < 6.0.1
    What is this about and how can I retsore access to Firefox on my pc?

    If you use ZoneAlarm Extreme Security then try to disable Virtualization.
    Do a clean reinstall and delete the Firefox program folder.
    * http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
    *[[/questions/869812]]
    *[[/questions/869951]]

  • How do I uinstall Yosemite? It's not compatible with my older MacBook Pro, and I can't connect to my printer or use safari

    How do I uninstall Yosemite? It's not compatible with my older MacBook Pro and I can't connect to my printer or access Safari

    How to Downgrade OS X Yosemite Back to OS X Mavericks

  • I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to che

    I installed a new printer and now Photoshop Elements tells me I can't print.  The error message is "The saved printer information is not compatible with this version of Photoshop Elements, or the saved printer is no longer available.  You will need to check your printer settings before printing."  I have uninstalled and re-installed Photoshop Elements, checked my printer settings and still I can't print a photo.

    Hi ,
    Please update to PSE 13.1
    13.1 has solved this problem.
    Refer to this link.
    Photoshop Elements Help | Printer errors with Photoshop Elements 13

  • Cannot install Logic from DVD version 9.0.0. because it is not compatible with the latest OS 10.8.3

    As I tried to install Logic 9.0.0 the OS comes out with a message saying that the OS is not compatible with this version of Logic.
    I have Logic conventional DVD Software package.
    How can I get this done?
    Any help, I appreciate!
    Thanks!

    No, the message prevents me from installing.
    Now, I took the App Icon from my Laptop which has the latest Logic Update installed and throw it in my new iMac's Application Folder. It seems to work OK.
    What I havent installed are the Additional Content and all the DVDs that come with Logic.

  • I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion and found out it was not compatible with my HP printer (HP photosmart C5580) so I called Apple and asked how to get Mountain Lion off and Snow Leopard back on.  The Tech told me to

    I was using OS Snow Leopard and on 8/1/13 I downloaded Mountain Lion.  Then I found out it was not compatible with my HP Printer (HP Photosmart C5580 all-in-one) so I called Apple support and the tech told me to erase the hard drive instead of going in the time machine.  Well I did that and then it took about three hours three days a week for about three weeks on the phone with an apple tech to get all my stuff back on my computer.  I have had trouble with my printer (won't do the scan anymore and wasn't printing on my DVDs.  Also the computer keeps freezing up when it is in the sleep mode, etc.
    When I tried to list my problem on this forum it lists your OS at the bottom and mine had Mountain Lion listed as what I was using so apparently it didn't erase it.  Want to know how to get Mountain Lion off and put my Snow Leopard on so things start working right.

    Go to the  menu/About This Mac - what OS version shows there?
    Do a backup, preferably 2 separate ones on 2 separate drives.
    Revert to a Previous OS X
    Revert to Snow Leopard
    If you do revert, I'd use Setup Assistant to restore your data. This process takes a while, so do it when you won't need the computer for several hours, based on my experience.

Maybe you are looking for

  • Error when trying to do an initial update of Solution Manager 7.1

    Hello Experts, I've just built a brand new 7.1 Solution manager and I'm attempting to apply the patches using the SP stack online tool.  My starting point is ISS Inital and my ending SP is 13.  I've downloaded all of the required patches and loaded t

  • Using 2 iPods on same computer

    I have an iPod already registered and in use on my computer. Now I need to add a nano as well. When I go to register the nano the info for the iPod shows up. Do I register the nano by typing the new information over the iPod info?

  • Table Maintenance Generator - Function Group regeneration issue

    I have table maintenance genertor in a function group that contains lot of tables . I by mistable regenerate the whole function group using table mainteance generator. Now i want to check which of the programs changed during the regenerator. I am loo

  • Unexpected behaviour in case of single value selection by using share point excel service

    If multiple values are passed to pivot table filter using share point excel service, filter is showing "multiple" text on filter. If user expands the filter, the passed values are showing as checked ones. Example: 'India' and 'US' values are passed '

  • [svn:osmf:] 13977: First check in to fix bug FM-332, more to come.

    Revision: 13977 Revision: 13977 Author:   [email protected] Date:     2010-02-04 10:32:41 -0800 (Thu, 04 Feb 2010) Log Message: First check in to fix bug FM-332, more to come. Ticket Links:     http://bugs.adobe.com/jira/browse/FM-332 Modified Paths: