WRT54G online settings problem

hi
ive just set up the router and everything was fine but when i upgraded the firmware it kind of scrambled the online settings. i can only see bits and pieces of the info. is there a way to fix this ? thanks

It is advisable to reset the router after upgrading the router's firmware..So reset the router for 35 seconds,power cycle the router and re-configure it from scratch.

Similar Messages

  • WRT54G - Online Gaming Problem

    I have been trying for almost a year trying to get online gaming to work with my router. I've been trying to play Age of Empires 2. I've done about anything and everything to get myself about play. I know it's my router as when I connect my computer directly to the modem, it works and I'm able to play online. I can never see the room when I use my router. My router is a WRT54G v2.2. It's been upgraded to the latest firmware which is one of the things I tried with no luck. I have tried port forwarding, but it didn't work. I followed this website exactly and tried it more than once: http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/Age_of_Empires_II.htm But no luck... I also even tried to enable DMZ, but no luck either. I tried Hamachi too. We're able to connect and all, but nothing either. I don't know what's wrong, but if anyone can help, I will appreciate it greatly. However, maybe I did something wrong with port forwarding. You never know, but most likely not. Still...

    ThisisReality wrote:
    I have been trying for almost a year trying to get online gaming to work with my router. I've been trying to play Age of Empires 2. I've done about anything and everything to get myself about play. I know it's my router as when I connect my computer directly to the modem, it works and I'm able to play online. I can never see the room when I use my router. My router is a WRT54G v2.2. It's been upgraded to the latest firmware which is one of the things I tried with no luck. I have tried port forwarding, but it didn't work. I followed this website exactly and tried it more than once: http://portforward.com/english/routers/port_forwarding/Linksys/WRT54G/Age_of_Empires_II.htm But no luck... I also even tried to enable DMZ, but no luck either. I tried Hamachi too. We're able to connect and all, but nothing either. I don't know what's wrong, but if anyone can help, I will appreciate it greatly. However, maybe I did something wrong with port forwarding. You never know, but most likely not. Still...
    Hi
    As u have upgraded the router,  ports are aleready forwarded and Even DMZ is enableD?(enufff !! shew!)
    click on security on the router page , Un chek block anonymous internet request.
    Set MTU to 1350 under set up tab.
    hey can u connect computer directly to ur Modem/ISP , and try accessing the game .
    maybe ur ISP firewall is acting on u !! ??(happened with me , its weird !! )
    let me know the status .
    pe@c3
    Message Edited by Sean-Knight on 08-21-2008 06:42 PM
    "What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

  • Problems with my online settings manager

    I am running Windows 7 64-bit and Internet Explorer 8 32-bit.
    I have Adobe Flash Player version 10.1.102.64
    So, here is my problem. I downloaded the newest version of flash after a browser program (Pandora) said that my Flash local storage was disabled. This led me to the online settings manager's Global Storage Settings panel. The issue is that, in that tab, the 'Allow third party Flash content to store data on your computer' will not select for me. I click and click, but the box will not check.
    I have tried using my Tab button to select it that way, but it will not select. I have tried uninstalling and reinstalling flash several times, and that has not worked. I have tried to delete Flash's Cache file, but I do not have a flash or a macromed file. Javascript is enabled. I have tried anything and everything I can think of. Any sort of help would be very greatly appreciated.

    justablueskittle wrote:
    There was no 'Flash Player' file in Adobe
    That may explain why you have the problem; there may be something wrong with the permissions in that Adobe folder.
    I am not sure how to proceed in this case; can you check the permissions of that Adobe folder?

  • ICal settings problem.

    I have an iCal settings problem. I simply cannot change the format to 12 hours. I have repeatedly set the system to 12 hours and that works fine. I have re launched iCal several times to no avail. Running system 10.6.7 and iCal is 4.0.4. Any ideas? Thanks. Geoff.

    iCal takes its format from System Preferences>Language& Text>Formats.
    Click on the 'Customize' button for 'Time' and set as here:
    Then drag the  'PM' button in the 'Time Elements' section to after the short time - though when I tried this it didn't appear in iCal. You may need to experiment a bit.

  • I changed my WRT54G security settings from WPA to WEP

    I changed my WRT54G security settings from WPA to WEP and now one of my latops (Dell 5100) will not connect wirelessly. It is using a linksys wireless-B notebook adapter. I am at a loss at how to reconnect this to my wireless network.

    Go to the setup page of the router on the wired computer and click on the Wireless tab,check the network name(SSID),change the Wireless Channel to 11-2.462 GHz,Keep the SSID broadcast enable and click on save settings...Click on the subtab Wireless Security and change the Security mode to WEP or WPA as per your requirement.If you are using WEP then,note down the KEY1 as the network key(case sensitive)...
    Now,on the laptops,delete the preferred network and then,try to connect the Wireless Network.

  • [Solved]Gnome settings problem

    Hi all.
    I have some strange problems with Gnome 3.2, it is hard to explain but these screenshots should:
    http://bildr.no/image/1012613.jpeg
    http://bildr.no/image/1012614.jpeg
    In the first picture you can see that something that is selected by default is pink, this happens all over Gnome. In the second one you can see that in nautilus when I want to select with the mouse it creates a white block so you can't see behind. I know it is a settings problem because the same doesn't happen on a new account, but the problem is that I have tried to delete .gnome2/ .gconf and .config but once I start to customize again the problem reappers. So I was wondering if there is anything else that I can try to delete without deleting the whole account or if there is some settings that I could to to remove this problem.
    Thanks in advanced
    Mod edit: The included images are too big, see our forum etiquette about this. For  screenshot posting rules you may also look here.
    Last edited by nordmoen (2011-11-01 13:57:18)

    caligo wrote:If you launch a GTK3 app from the terminal, are there any GTK related error messages (e.g. CSS errors)?
    Yes!
    Havn't noticed that before:
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:620:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:626:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:632:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:639:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:645:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:651:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:657:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:663:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:669:27: Whitespace between 'url' and '(' is deprecated
    (gnome-system-monitor:3153): Gtk-WARNING **: Theme parsing error: gtk-widgets.css:675:27: Whitespace between 'url' and '(' is deprecated

  • Satellite L40-14F - Display settings problem

    Hi,
    I have Toshiba Satellite L40-14F with Intel GMA X3100 video card.
    I have display settings problem, I can't change screen resolution and color quality when video card drivers are installed, screen resolution is 800 by 600 pixels and color quality is lowest 4 bits, when i uninstall video card drivers can change it. I try to install other drivers, there are the same problem :( Please help me :)
    Regards

    I updated BIOS then install video card drivers and it works :)

  • I downloaded a security update & when i tried to open firefox afterwards ,I couldn't open it. have a DEP settings problem i tried to change my computer's DEP settings but was notified i couldnt for firefox,what should I do?

    I was prompted to downloaded a security update & so I did. when i tried to open firefox afterwards ,I couldn’t open it. My computer told me I had a DEP settings problem.I tried to change my computer's DEP settings but was notified i couldn't for firefox. I tried the uninstall & then install Firefox again route (could not even do it in safe mode since i can't even open firefox)but still had the same problem afterwards. What should I do?

    Do a clean (re)install and delete the Firefox program folder (C:\Program Files\Mozilla Firefox\).
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 10.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible.
    *Do NOT remove personal data when you uninstall the current version or you lose your bookmarks and other data because all profile folders will be removed.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Trying to make my old 3G iphone an iPod for my 4 year old grandson. I have found lots of ways to do so online. PROBLEM: when I charged it and turned it on it only flashes many different languages. Will only allow me to call emergency numb

    Trying to make my old 3G iphone an iPod for my 4 year old. I have found lots of ways to do so online. PROBLEM: It's been off for 2 years. When I charged it and turned it on it only flashes many different languages. Will only allow me to call emergency number. Any ideas how I can log on to it?

    Im pretty sure what you are looking at is Set up Assistant where it shows different languages on the slider. If I am right then just slide to unlock and follow the prompts to choose your language, country etc.

  • Feedback:  Online Settings Manger for Flash Player

    Font in online settings manager for Flash Player is way too small.  Please give users the option to increase size.  Thanks.

    Thanks for the feedback.  Could you please open a new bug report on this over at bugbase.adobe.com?  Please post back with the URL so that others affected can add their comments and votes.  You might also be interested  in using the native control panel which can be found with your computer's system control panels.
    Thanks,
    Chris

  • N73 - Operator Settings Problem

    Hi I've received settings from my operator to setup my phone automatically & they have been received in my txt inbox. When I try to open them I get the message "General: Feature Not Supported". I'm unsure why this is, the phone has the most current firmware on it. It is the standard edition if that changes anything, but I don't think it would. Would be greatful if someone could shed some light on the message I'm getting.

    As i told it might not be the phone " or it might " but i've been reading through the Blyk support forum and they have their share of settings problems. on the other hand i think the N73 is one of the best handsets around so it's not a waste.
    try using Blyk support forum for help:
    http://forum.blyk.co.uk/forums/default.aspx
    and the best way to diagnose the problem is to use another sim card from another company "if you have one", and let them send you the confiquration messages , and try that, if it worked, then it's not hte phone.
    Fear not those who argue but those who dodge

  • Online settings vs Local settings

    Hopefully someone can help me clear up this confusion. What is the difference between using the Online Settings Manager and Local Settings Manager? What is the scope of what each version controls?
    This is compounded by the fact that changes in the Online Settings Manager within Firefox are reflected in Internet Explorer and vice versa, but settings within Chrome seem independent of every other browser and has no reflection on the options chosen within Firefox/IE. Furthermore, only the Online Settings Manager lets you choose how often you want Flash to check for updates (7 days, 14 days etc). You can't do that in the Local Settings Manager.
    Wouldn't a unified, all-encompassing Local Settings Manager be a much better option?

    Yes you can. Learn how here: http://acrobatusers.com/tutorials/2006/add_custom_menu_items

  • Online Games Problems With WRT54G Router

    Hi There ppl,
    I have a Lan House with 50 comps working, and most of my costumers are looking for online games entertainment (Cabal Online, Ragnarok, Dota, CS, 9 Dragon etc). We have an 8 Gb DSL connection and another one of the same speed for back-up (not running simultaneously at the moment). We should be having outstanding results for online gamming (and we were before installing the new router) but we are having several problems since we install a new LinkSys WRT54G router here. Our physical configuration is the modem, followed by the router, than three DLink Switches(24 ports) and my main computer. Everything cable
    What we noticed is that the Internet connection looks normal (even using the command "ping", nothing strange appears, no timed out at all!) but online games (specially the above mentioned) have an intermitent connection. (Some times they connect, some dont)... Looks like it happens usually when I have the house crowded, but already showed also with it empty.
    Another issue is that I am using the LinkSys Advisor to help identifying this problem, but I am getting even more confused, because its giving new information each time I refresh the "my network" window. Also happens when showing "My Network Settings" on the Support Tab.
    Im using Firmware 8.00.0, what I think is the newest.
    I didnt try any forwarding port issue yet, as I would like to receive more information about it (never needed to configure anything related before). Concerning the MTU value I already tryed withou any significantly result.
    Please If anyone had the same problem, or have any idea of other possible tests, i would appreciate a lot.
    Thank you and have a great day all

    Hi there Helm,
    Tks for your attention and reply to my issue!! Yesterday right after posting here (when we closed the doors and I could be able to work on it) I did get the latest one (8.00.2) and also set up manually the MTU value to 1500 (standard is automatic). I also unckeck the "anonymous internet request bock", "Multcast filter" and "Filter NAT forwarding", all of them were checked as standard. I also checked the "HTTPS Internet Access" (standard is only HTTP).
    At a first moment I could get a very low sensitive better result (but the Lan was closed, so I had the entire 8Gb for my requests). I came back to work right now, and we have about 30 ppl in, mostly using the Internet, MSN and so... I am trying yo connect to Cabal Online, and GG-Esports (Warcraft, Dota) both of them giving the same problems as always... I am really getting tired and disapointed with LinkSys, I really though I would have much more than I am having right now.
    Anyway I gonna keep trying each night to see what I cant get. I do post here If I find any solution (or if I really decided to move to another brand)
    Thank you a lot and have a great night out there
    GT

  • WRT54GS Settings Problem

    hi, i am having a problem changing my router settings. i tried using the Easy Link Setup software but that didn't do anything, also i have tried doing the http://192.168.1.1. thing, and whenever i go there this is how it looks [image] and there are no links, tabs or anything to click on except for those text boxes. i've opened it in a few different browsers and it still looks the same, any help would be appreciated
    Message Edited by disengage on 01-11-2008 08:06 PM

    To view the router's web pages:
    Use Internet Explorer, it usually works.
    JavaScript must be enabled.
    Use a computer that is wired to the router.
    In the non-working computer, temporarily turn off your software firewall.
    If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
    If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
    If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
    A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
    If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
    If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
    If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
    If the reset does not fix your system, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

  • Security Settings Problem w/ WRT54GS

    I recently had to reset my router, and after a few initial problems with setting everything up again (had to change the routers default IP address from 192.168.1.1 to 192.168.1.2 to get it to work)... I've now hit another roadblock I can't figure out.
    Every time I activate any kind of wireless security, (I've tried both WEP and WPA) I lose access to the router and the internet.
    I end up having to reset the router and start all over again just to regain access to the manual configuration interface... so I can then change the default IP address to 192.168.1.2... so I can get on the internet again.
    I don't recall having this much trouble last time I set this thing up... I need some help please.
    Thanks!
    Dell XPS running Windows XP (SP3)

    Disconnect the modem power cable and log on to the router...You need to change the router IP to 192.168.2.1 instead of 192.168.1.2...After that power cycle your router for 1 minute...Open the set up page of your router using the new IP(192.168.2.1)...Click on Wireless tab...change the Network Name (SSID) to a new name...change the channel to 11...and click on Save Settings...
    To enable Secuirity follow this and then try to connect to the Wireless Network on the Wireless Computer...

Maybe you are looking for