Wrt54g only have 2 wireless put of 4 but all lights are on

I was having a connection problem the other day which was weird. So, I went to check on my wireless router and ALL 4 lights were lit. I unplugged it and rebooted and every thing went back to normal. Now it has happened again. Are people using my wireless connection?? Or is my box DYING? If I have my location set a home does that mean they can access my computer??  I have one thing hard wired and a wireless card in my laptop. I had set up a password with my router before, but maybe it got erased when I upgraded to a new laptop..?? I'm not sure if that could change it but I haven't deleted it my self. I'm not sure how to make sure that its there.. I found where it says WEP ..... and key 1. Also, I have SSID to something other then linksys. My network type is access point and network availability is All users (not sure what that means). How can I make sure I'm password protected?? ARGH! My head hurts! any info would be awesome!

So,all the four  Ethernet light lit-up although only one computer is connected....Try to hard-reset the router for 60 seconds,Power Cycle the router and check the status of the light on the router.
If the light status on the router is OK then,open the router setup page by typing 192.168.1.1 and re-configure the router..If you get the same result after resetting the router then,try to upgrade the router's firmware..
You can download the firmware from www.linksys.com/downloads..On the linksys setup page,Click on Administration tab to upgrade the firmware..

Similar Messages

  • I have pages setup for english but all templets are in spanish

    Hello everyone
    After trying to reset keyboard preferances and services I am not getting any solution.
    I have pages setup for english but all templets are in spanish.
    can anyone help to fix this problem?
    Thanks
    dsd

    You mean this?
    Sociis mauris in integer, a dolor netus non dui aliquet, sagittis felis sodales, dolor sociis mauris, vel eu libero cras. Interdum at. Eget habitasse elementum est, ipsum purus pede porttitor class, ut adipiscing, aliquet sed auctor, imperdiet arcu per diam dapibus libero duis. Enim eros in vel, volutpat nec pellentesque leo, temporibus scelerisque nec. Ac dolor ac adipiscing amet bibendum nullam, massa lacus molestie ut libero nec, diam et, pharetra sodales eget, feugiat ullamcorper id tempor eget id vitae. Mauris pretium eget aliquet, lectus tincidunt. Porttitor mollis imperdiet libero senectus pulvinar. Etiam molestie mauris ligula eget laoreet, vehicula eleifend. Repellat orci eget erat et, sem ***, ultricies sollicitudin amet eleifend dolor nullam erat, malesuada est leo ac. Varius natoque turpis elementum est.
    A: It's Latin, not 'Spanish.'
    B: What problem?
    Click on this Placeholder text to select it (All of it will be selected on a single click).
    Type.
    On the first kaystroke, all of the placeholder text is deleted and the first typed character appears.
    Carry on.
    Images in the templates are media placeholders. Replace them with your images in a similar manner.
    For more on placeholder text, see page 75 of the Pages '09 User Guide; for more on media placeholders, see page 137.
    The guide may be downloaded via the Help menu in Pages '09.
    Regards,
    Barry

  • In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)?

    Hello, all.
    In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?

    Click the search magnifying glass and uncheck "Search entire library".
    Type in the name of the track.
    Click the album of interest to show tracks.
    Select the track.
    Press the X in the search box to clear the search.
    Double click the track you want to start playing first.
    tt2

  • My MacBook Pro has a 500GB Hard Drive (HD), but when I search my capacity I says that I only have 384.99 GBs of capacity. Where are the other 100GBs?

    My Mac has been a little slow, so I figured that I should make sure that I have enough storage capacity on my Hard Drive (HD). In doing so I realized that my HD is missing 100GB of space capacity. I thought that my HD was supposed to at least 499.25 of available space.
    When using "About this Mac", it clearly shows that I only have 384.99 GB of capacity.
    Where are the other 100 GB? I should mention that I recently deleted a partition for that same amount of storage. That has to have something to do with this? Can you help me?
    About My Mac:
    OS X Yosemite
    Version 10.10.1
    MacBook Pro (15"-inch, Early 2011)
    Processor: 2GHz Intel Core i7
    Memory: 4GB 1333 MHz DDR3
    Dish Description: TOSHIBA MK5065GSXF Media

    Discrepancy in calculating space between Finder and Disk Utility
    “Finder does not take into account the  Backups/ local snapshots,
    but disk utility includes them.”
    http://pondini.org/TM/30.html
    Disk space / Time Machine ?/ Local Snapshots
    Local backups
    http://support.apple.com/kb/ht4878

  • I have upgrade to IOS 8 and all Fotos are ereased and on my Computer is only the last Backup and there a no Photos now what can i do?

    I have upgrade to IOS 8 and all Fotos are ereased on my Iphone and on my Computer is only the last Backup and there a no Photos now what can i do?

    You really need to try this on a computer, not on the iPad.
    Seeing how what is in the cloud is also on the iPad, if the content is not on the iPad, there is a good chance that the content is lost. But you can try logging into www.icloud.com in a web browser on a computer and log into your account and see if you can get into the Pages app. You may have to sign up for iCloud drive if you didn't do so already. Make SURE you that you read the blurb that will pop up in that window in iCloud for more information.

  • I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up. I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest. any suggestions

    I have Lion, and I can't see my unread messages count in the dock, even after the preferences set up.
    I find the Lion Mail too complicated. Leopard was much easier and more simple to use. I only have one account& don't need all the rest.
    any suggestions?

    weird.
    It's so frustrating, I got my Mac Book 5 days ago and I'm already having a discussion in the forum.
    Thank you so much for your prompt replies.
    It's past midnight here so I'd better get some rest...
    Good night captfred!

  • Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... I

    Hi , unfortunately i faced with a problem that i couldent open my audio note so i thought if i delet it and transfer the application from itunse from my pc i can have my files...but all of them deleted from both application and also from wifi address... Is it any solution for recovery the filew? I missed lots of important files , plz help me
    Tnx alot

    Hey Eric,
    Thanks for taking the time. Unfortunately no that does not solve it. Same as swipe it will get me there and it will show separate programs spaced out. The issue I am having is that all my open word files are bunched up in a pile on top of each other. I can see the edges of each one but I want them to be separated from each other enough that I can visually identify what file is what.
    Again, thanks for trying, it is appreciated.

  • HT204088 Hi am am trying to purchase something in an app I have on my phone. But all it's saying is that "your purchase can not be completed"

    Hi am am trying to purchase something in an app I have on my phone. But all it's saying is that "your purchase can not be completed"

    Hi Jessica Lew-Fatt,
    If you are having issues with an in-app purchase, you may find the following article helpful:
    iTunes Store: About In-App Purchases
    http://support.apple.com/kb/ht4009
    Regards,
    - Brenden

  • App Store shows 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    App Store shows that I have 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    I have the same issue with one App in the App Store. The app is installed and current. But the App Store says I have an update. I tried restarting. No help.

  • Yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.

    yesterday i bought ipad4 i transfered photos from pc to ipad that it opened in ipad when i click slideshow everything went black. whenever i m opening the application(photos) full screen looking black but all photos are occuping memory.i can see the pictures in settings>brightness>wallpapers but i couldnt able to see in photos application in ipad4

    I have several thousand photos in several folders. I have noticed that whenever I want to change the folder used as the side show source, it takes the Screen Saver Preference pane a very long time to respond. It is as if it is scanning all the photos in the currently assigned folder in order to display them in the preview window provided, and it gets so dogged down doing that it can't respond to my clicks on the Choose Folder option.
    Assuming you don't want to redistribute your photos into a greater number of folders or subfolders so there would be fewer in each folder to process, you could try a workaround. Try moving your currently-assigned folder to your desktop temporarily, before opening the Screen Saver preference pane. If the preference pane can't find the old folder, it may immediately ask you to choose a new one. You could hopefully then do so, close the preference pane, and then put back the old folder.
    It's my understanding that there will be no future updates to Tiger, only security fixes.

  • HT4527 Shared, transfered, backed up, synced, but all apps are gone...?

    Hi,
    We have 1 iPad, 1 iPhone, and 3 iPods that need to be moved from old-pc to new-pc..  So I:
    - read forums, faqs, etc.
    - authorize new-pc
    - set up sharing and copy everything from old-pc to new-pc
    - transrfer purchases from iPad to new-pc
    - do a back up of iPad to new-pc
    - upgraded iPad on new-pc
    - sync iPad to new-pc
    Then, much to my dismay, I see that no apps are present.  Music and movies are there, so are some personal settings, but no AppStore apps.   "A-ha!", I thinks to myself..."I'll restore from backup!"  After which iPad has reverted it's sync to old-pc. 
    So I curse for a bit and re-sync iPad to new-pc.  But all apps are still gone, and the only way to get them back on iPad is to download them from iStore (or whatever the h*** it's called) but all personal app-info is gone.
    Please help.  How do I transfer iThing ownership from old-pc to new-pc without losing half of everything?
    Thanks, oh so very much.
    Splats.

    How to Restore from a Backup   >  http://support.apple.com/kb/ht1766
    What gets Backed Up
    iTunes http://support.apple.com/kb/ht4946
    iCloud http://support.apple.com/kb/PH2584
    KacieKitKat wrote:
    It also did not fix my WiFi issue.
    Have you tried this...
    Reset all settings
    Settings > General > Reset > Reset all Settings.
    This will return all iDevice settings to factory defaults... you will not lose any data.... But you will have to re-enter all of the device settings.

  • Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    It should be in the Users/ Shared folder.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
    Regards
    TD

  • HT3702 I am being charge for itunes but all apps are free?

    I am being charge for itunes but all apps are free? It is possible to get money back?

    If you are referring to the temporary store holding charge as described on the page that you posting, which is 'charged' each time that you change the card details on your account, then it should disappear off the card within a few days or so - though it varies by bank, and with it now being the weekend it might an extra day or two. If they haven't disappeared within a week of them being made then you could contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    Also some apps may be free to download but they then allow you to make in-app purchases to unlock extra features within them - you can turn off in-app purchases via Settings > General > Restrictions on your phone.

  • I have accidentally deleted the proloquotogo app with all it's data. It was on my iCloud backup list so can I know restore all the settings for this app from a previous iCloud backup? I now only have the basic pages instead of all the programmed pages.

    I have accidentally deleted my proloquotogo app with all it's programmed data. Is it possible to restore from iCloud as it was listed in managing storage. Where does this backup go to? I have reinstalled the app but I only have the basic pages. Help please. Thanks

    Essentially it would mean another Internet connection yes, however it's your local network that I am wondering about and whether it could be the problem.

  • Recently bought new PC and authorized it for downloads but all songs are only 1 minute and 30 seconds?  Is there another button to hit???

    recently purchased a new HP PC and authorized for ITunes downloads but all my songs are coming in with only one minute and 30 seconds of recording...any suggestions?

    I don't have database access on weekends (look at it as a template)
    suppose you
    create table help_iot
    (bucket number,
    id1    varchar2(20),
    constraint help_iot_pk primary key (bucket,id1)
    organization index;not very sure about the create table syntax above.
    declare
      maximal_bucket number := 10000; -- will update few hundred rows at a time if you must update few million rows
      the_sysdate date := sysdate;
    begin
      truncate table help_iot;
      insert into help_iot
      select ntile(maximal_bucket) over (order by id1) bucket,id1
        from test_tab
       where id2 = '336015000385349';
      for i in 1 .. maximal_bucket
      loop
        select id1,id2,last_modified
          from test_tab
         where id2 = '336015000385349'
           and id1 in (select id1
                         from help_iot
                        where bucket = i
           for update of last_modified;
        update test_tab
           set last_modified = the_sysdate
         where id2 = '336015000385349'
           and id1 in (select id1
                         from help_iot
                        where bucket = i
        commit;
        dbms_lock.sleep(15);
      end loop;
    end;Regards
    Etbin
    introduced the_sysdate if last_modified must be the same for all updated rows
    Edited by: Etbin on 29.11.2009 16:48

Maybe you are looking for