WRT54G Problem Update - Please help!!

I'm having problems again but this time I have an error msg in Vista that might help someone troubleshoot the problem with me (I know what the msg means but not sure why it is happenning).  It reads:
"The IP address lease 192.168.1.100 for the Network Card with network address 00E0B8E6ABCA has been denied by the DHCP server 192.168.1.1 (The DHCP Server sent a DHCPNACK message).
Now I know that the DHCP server is my router, and I also know that the network card it is talking about that is being denied the network address is the card on my desktop.  What I don't understand is first the lease time on that particular card still has like 2 days left on it, second, why is it that all I have to do is unplug the router then plug it back in and then everything is fine?  After I plug it back in, I can go to the router setup page and see that it has assigned the very same address of 192.168.1.100 to the very card it has just denied the address to (or so the error msg in Vista says).  Oh, the only part I have no information on is the DHCPNACK message.  I have no idea what that is or where to find it/troubleshoot it.  I would greatly appreciate any help anyone may be able to give me.  Thanks in advance.
This is still the same problem I originally posted about.  I updated it to include the error message from Vista.

Thanks Wizzard.  I'll give that a shot and see what happens "in time".  This problem only occurs once in a while, otherwise I'd be asking for help a lot more.  At any rate, I appreciate the assistance.  Oh, I'm assuming that this will work for any network card be it in a desktop or laptop.  If I'm not correct, please let me know.
Thanks again

Similar Messages

  • Wrt54gs problem URGENT PLEASE HELP

    hello, i have had the wrt54gs for about 4 months and my internet has been perfect but about a few a days ago, when i play counter strike source online or anything else i get ridiculous lag and it not able to play (500-600 ping), i have not changed settings or anything. when i watch the network monitor it shows about 4-5 bars on signal strength and link quality but every like 30 seconds it says you are connected to the access point but the internet cannot be found then like 30 seconds later it goes back to normal.
    i have upgraded the firmware of my router and linksys helped me change some of the settings on the router but nothing happened.
    can you please help me
    thanks
    pete
    Message Edited by Stelth2k1 on 10-27-2007 07:14 PM

    If it's working well all the while and only have the problem recently, then I guess it can be the problem on Internet connection link, or ISP side.
    Try to connect your computer directly to the DSL/cable modem, then play the game, see anymore lagging..
    picoHat
    Home Network, Wireless Network and Computer Networking Made Easy

  • I am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.

    i am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.
    aman

    Are you using Windows...?

  • Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help Apple support team!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B...)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

    Trouble to connect to wireless G routers after installed the latest update 10.10.2  . Anyone with the same problem? Please help !!! Macbook Pro mid 2010. PS.: Only with wireless G routers, the rest are fine (N, B..., and both radio bands)

  • My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    I am a librarian at a 1:1 iPad school and we are having this problem with all ~3000 student iPads as well at ~300 teacher iPads.  This is extremely frustrating.  I have tried suggested fixes found on other discussion boards but none have worked.

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Adobe Content Viewer problem. Please Help me...

    Hi after updating online. Folio, I tried to update the trial version of the publication on my iPad but I get this message: "the issue isavailable for dowload, but new signing for an application version. Update the application from the App Store. "I went to the AppStore and was not any update of the Content Viewer ... I deleted the version on my iPad I downloaded again ... but without success gives me the same problem ... Please help me ... how can I do??
    thanks

    Hello Bob and thank you for responding so quickly ... Would you be kind enough to send me the link where I can download older versions of Folio Builder and Folio Producers Panel tools for InDesign 5.5. I'm looking for them but I can not find them.
    Thank you for your patience.
    Il giorno 21/gen/2012, alle ore 16:18, Bob Levine ha scritto:
    Re: Adobe Content Viewer problem. Please Help me...
    created by Bob Levine in Digital Publishing Suite - View the full discussion
    As discussed in numerous threads already, the new viewer has not been approved by Apple yet.
    If you’re a pro or enterprise customer you can create your own viewer app. If not, you’ll have to wait or roll back to the older tools.
    Bob
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4155907#4155907
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4155907#4155907. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Digital Publishing Suite by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Getting trouble updating - please help!

    Hi
    The update server is not responding. The server might be offline temporarily, or the internet or firewall settings may be incorrect.
    The message above appears each time I try to update from the Creative Cloud panel. It starts to update and then fails.
    From the Adobe Application Manager I ticked just one update - and that one worked. I can't get the Adobe Application Manager to come back up - how do I open it so that I can tick another individual update?
    I've wasted a whole morning trying to fix this... not happy. The whole point of being part of the cloud was to get updated without hassle, this is ridiculous. I've noticed, from reading forums on the web, that loads of people are having the same problem. Please help me to make this update thingy run smoothly.
    Petra

    Just found out you can open the Adobe Application Manager from PS CC prog - just click: help /updates from the top menu. It seems I have to install one update at a time - from the Adobe Application Manager - BUT importantly, first quitting the Creative Cloud panel- as they seem to conflict. Sorry for the tone of the comment above - I didn't realise I was on a community forum, I thought I was asking Adobe directly.

  • Tried to access programs and get Error: 16 message. What's the problem? Please help!

    Tried to access programs and get Error: 16 message. What's the problem? Please help! Photoshop, photoshop elements, Dreamweaver - none of my Creative Cloud apps will start-up, since my last update. I need to access these programs for jobs I'm working on.

    Hi wdriver,
    It seems like due to some unknown reason permission from the Licensing folder is removed. Please try launching any of the apps by right clicking and select Run as an Administrator, it should fix the issue by doing that.
    Please let us know if it helps.
    Regards,
    Abhijit

  • IMovie 11 will not play any of the projects I have created over the past several months.  It will play iMovie events.  Anyone else having this problem?  Please help - Thanks

    Movie 11 will not play any of the projects I have created over the past several months.  It will play iMovie events.  Anyone else having this problem?  Please help - Thanks

    Thanks for the suggestion...
    I just got back from the Apple Store for the second visit with the Mac Genius to try to resolve the problem. 
    First visit we trashed the iMovie 11 application and reinstalled iMovie and ran a software update. Upon relaunching we were pleased that all projects and events ran perfectly from both the HD and the Drobo. 
    After lugging my 27" iMac back home and restarting it the same problem appeared.  I returned to the Apple store for a second visit. This time I left the iMac at the store overnight.  The apple service guys were able to duplicate the problem and wiped my hard drive.  There appears to be a bug with iMovie 11 (not confirmed) and an elevated report was submitted to Apple engineers. 
    I am leaving my "old" projects and events on the external drive unless I need to import them.  I am not going to restore from back up and will use a "clean" version of iMovie11.  No guarantees the problem won't come back.  This issue consumed a TON of my time.... hopefully Apple can fix iMove11.

  • Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files open w/o a problem.  Please help.

    Went to open a file in words and got message. "You need a newer version of Pages to open this document." I have latest version.  All other files in words open w/o a problem.  Please help.
    Thank you.
    <Email Edited by Host>

    You have 2 versions of Pages on your Mac.
    Pages 5.2 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You are alternately opening the wrong versions.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Older versions of Pages 5 can not open files from later versions of Pages 5.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Apple has removed almost 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Peter

  • Installed successfully but network is not connected. Yet when I go on my Mac network is connected. Is there any other way to solve this problem? Please help.

    Hi,
    I have just installed Windows 7 Home Premium on my Mac book Pro 13inch, it installed successfully but there is no network connection. Yet when I go on my Mac I can get online no problem. Please help or what other way I can do to connect windows online?

    Did you download Windows Support Software when you started installing windows via Bootcamp. If yes you need to then install the Support Software after installing windows which contains Windows drivers for Mac hardware.

  • How come my external hard drive is no longer visible in finder even after ticking it in preferences? it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help.

    it shows in the disk utilities but does not allow me to find a problem or fix the problem? Please help. also my external hard drive is a seagate free agent go, 500GB. it is visible on my tv but has no files in it… i'm scared i've lost everything?

    Honestly i cannot remember sorry, i got it like 5 maybe 6 yrs ago and just started downloading things to it as the memory on the computer started filling up and when i wanted to see photos/videos on my TV.
    My wife did tell me after i had written this post that she did try and record TV to it as it was plugged in. I think by doing so somehow has deleted everything.   It reads on my TV yet has no files in it but won't show up on my computer. hope this helps.
    Starting to think it is going to cost more to retrieve files on it than it will be to buy a newer and larger one.

  • My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help.

    My new iPhone 5 has black and white lines on the screen. It's not been damaged. I've tried turning it off but this does not solve the problem? Please help. I can't find my answer on the Internet.

    By far the most common problem hardware-wise seems to be scuffs on the aluminium. Yours is the first report of a faulty screen I've seen.
    If you use the same Apple ID on both devices it'll sync whatever you want it to - music/apps/photos/messages/etc.
    I've just switched from a Galaxy S3 to iPhone 5 (having already owned an iPad for a while) so I'm in a similar position!

  • Using Firefox, I am unable to do my microsoft windows updates, please help!

    I just downloaded Firefox, and I am unable to do my Microsoft updates, please help!
    == This happened ==
    Every time Firefox opened
    == I downloaded Firefox today

    Use IE for Microsoft updates. MS updates use AciveX, which Firefox doesn't support.

Maybe you are looking for

  • Error when displaying portlets..

    hello all, I have some pages with some tabs including some portlets (forms, reports and dynamic pages). it was running well before.. but now it gives error instead of displaying the portlet. the error massage replaces the portlet. and that happened w

  • Sql query is running fast in sqlplus but too slow in oracle why?

    Hi, I am executing one query in sqlplus . it gives output in two mins. when run that query in oracle it takes above 7hrs. why? what is root cause of this problem?

  • Some comments show as XML markup?

    In a few documents that are shared for review, some of the comments look like code, how do I correct this?

  • "Count" Statement IN Formula

    Post Author: LHooker CA Forum: General I would like to create a report that creates totals for each individual salesman (Group #1). The criteria is determine by a "LIKE" statement (i.e. LIKE "Port"). I need the total amount and the number of records

  • Custom fields added on PO header and PO item in ME21n

    hi everybody I have added 2 fields on PO header and PO item level in ME21N screen, everything is working fine but the issue is that if the Customer Data tab page is not opened at the Header Level, the additional fields in Customer Data tab page at It