WRT54G router locks up when connecting wirelessly to a Samsung Blue Player

My WRT54G router locks up 100% of the time when attempting to connect connect wirelessly to a Samsung Blue Player (Model number BD-P3600). I can connect to it with a cable no problem, but when I attempt to do so wirelessly and type in the password on the Blue Ray player, it attempts to connect but the router locks up and all devices connected to it (wired or wirless) lose connectivity. Any ideas?

Try the following steps:
# Open up the browser and on the address bar type 192.168.1.1 that will open up the Router setup page.
# Then Click on wireless Tab select Channel Width to 20 MHz only and Channel to 6, 9, and 11. Click Save Settings.
#Adjust the following advanced wireless settings:
~~ Lower the beacon interval from 100 to 50
~~ Lower the fragmentation threshold from 2346 to 2306
~~ Lower the RTS threshold from 2347 to 2304
Then check the connectivity status..

Similar Messages

WRT160N Router Error message when connecting wireless

This is the advanced error report I received after diagnosing my connection. Everything I have tried to do has not solved my problem. Please Help! Thanks
Helper Class (RNWF MSM Helper Class) Event:
Wireless Diagnostic Helper Class Event
For complete information about this session see the Wireless Diagnostic Informational Event.
Helper Class: Native WiFi MSM
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 0c5fedf8-83c2-45eb-a664-bc2385294b58
Interface name: Intel(R) Wireless WiFi Link 4965AGN
Interface type: Native WiFi
Profile: DaveJeremyCameronBen
SSID: DaveJeremyCameronBen
SSID length: 20
Connection mode: Infra
Security: Yes
Connect even if network is not broadcasting: No
Result of diagnosis: Problem found
Root cause:
The wireless settings for the network adapter on this computer don't match the settings of "DaveJeremyCameronBen"
The selected data rate is not correct.
Detailed root cause:
802.11 connection failed due to status code 18: Association denied due to requesting station not supporting all of the data rates in the BSSBasicRateSet parameter
Repair option:
View the wireless network adapter settings on this computer to verify they are compatible with this network
If you set up or own this network, you might be able to fix the problem by changing the settings on the wireless router or access point to be compatible with the settings on this computer. Contact the network administrator for "DaveJeremyCameronBen" or your hardware manufacturer for further assistance.
Event Verbosity:0
Solved!
Go to Solution.

I think there is a profile saved on your wireless computer.
What is the operating system on your computer ?
Delete the profile on your wireless computer. I think you are using the intel wireless adapter on that computer.
Open the Intel wireless adapter utility. There you will find the profiles saved on your computer. Delete the wireless network profile that you are trying to connect.
Now open the setup page of the wireles router. Go to the wireless tab. Check the wireless network name. Click on wireless security tab and check the wireless security settings. Make sure that you have the correct network key/password.
Now try to connect to the wireless network again.
If it is windows XP operating system then you can also connect to the wireless network using the windows wireless network utility.

Officejet Pro L7780 locks up when connected wirelessly

I'm trying to set up my iPad to print to an Officejet Pro L7780. Prior to beginning this effort, we were able to print to this computer through an ethernet connection no problems.
However the printer won't function once it connects wirelessly - locks up entirely. Can't get iPad, PC w/Vista, or a PC with XP to recognize the printer on the wi-fi network. And, printer button functionality is gone, including the power button. Any suggestions?

Hello gathey,
You can click the links below for two documents dealing with wireless network issues for your printer.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01154219&tmp_task=solveCategory&cc=us&dlc=en&la...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01893360&tmp_task=solveCategory&cc=us&dlc=en&la...
I will remind you that your printer can be hardwired to your network and the iOS device be wireless, as long as it is the same network.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Loop drops when connected wireless (NI 9191)

Hi,
I cannot figure out why a NI cDAQ 9191 chassis has connection drops when connected wireless and works
perfectly when connected thru LAN.
I wrote a little test VI to check the connection accuracy. The chassis has a NI 9375 I/O module plugged in.
A Moxa AWK3121 is used as wireles access point. What I do is check 5 digital inputs and control 3 digital outputs.
The outputs are continuously placed on/off at a different rate. I use an event loop and a main loopt that communicates
to the chassis at a loop rate of 10ms.
The chassis, laptop and Moxa A.P. are all close together on my desk. The Wifi signal is excellent.
Now, the code i written is probably not optimal.
But... If I start with connecting the chassis with a LAN cable to my laptop, Wifi Disabled, Linked Local. The communication is perfect.
No drops between the loops and the real time.
No communication errors. Runtime was 52 minutes.
Second test. Connected the chassis to the Moxa A.P. with LAN cable. Laptop connected wireless to the Moxa A.P.
Chassis still in Link Local. Ik can access the chassis in MAX. No problem.
When I run my test, I immediately see loop pauzes. After one minute there can be already a difference of 20 sec.
between calculated looptime and real time. Sometimes the active light on the chassis goes off and on.
When the active light is out, the loop is on hold. (Wich is normal as I assume the DAQ VI's are waiting for response.)
After appr.10 minutes the error -50405 "No Transfer in progress because transfer was aborted by client".
If I look at the timings there is already a difference of more then 5 minutes between the loop timing and the real time.
As last I tested with the chassis and the PC connected wireless to the Moxa A.P.
I did not get the -50405 error, but again loop drops. After 10 minutes there was a shift of 2 minutes.
Has anyone experience with wireless connections with the NI 9191 chassis?
Can I change my code? Did I mis something? (I'm a newbie to Labview)
Any help or suggestions would be appreciated.
Thanks in advance.
Frankie.
Labview 2014 SP1 (32bit) on Windows 7 Enterprise (X64)
Chassis and Moxa all updated to the latest firmware.
Solved!
Go to Solution.
Attachments:
Chassis919Tester.vi ‏51 KB
Symmetrical_Pulse_Generator.vi ‏55 KB

I am not clear on whether you are connecting the two together "in it's own little network" (which implies "router" and not "AP") or if you are connecting to the LAN through the wireless device (in which case it is entirely appropriate to refer to the wireelss device as an "AP"). Your last post about hot spots is what confused me.
But as you said, the biggest worry is the active light. Try using a different router/AP. I've seen routers overheat and reset themselves before due to inadequate heat sinking. i.e., Someone (not me, I swear!) dropped the AP and knocked the heat sink off the chip.
As for the delay, if you are indeed using the Moxa as an AP, are you sure you're connecting to your AP? If you're connected to a hotspot instead, your throughput will be at least halved - and maybe even 1/4 bandwidth if your AP happens to have connected to a different hotspot than you did. If you are using it as a router, try differnt bands or channels to see if you can get around any interference your company wireless network might be generating.
In general, conclude that wireless isn't the best way to connect test devices together.
Bill
(Mid-Level minion.)
My support system ensures that I don't look totally incompetent.
Proud to say that I've progressed beyond knowing just enough to be dangerous. I now know enough to know that I have no clue about anything at all.

2nd iPod Classic locking up when connecting to MacBook Pro

I'll sum up the lead-in story as best I can.
I have a 2010 MacBook Pro 13". Just got an new iPod Classic a couple weeks back. I discovered that when playing the iQuiz game, I had a few lock-ups (freezing). Then a handful of times, it locked up when connecting it to the MacBook for charging or syncing. It didn't lock up EVERY time. But about 1 out of every 4 syncs on average.
I naturally thought something was wrong with the Classic, and brought it into the Apple store when it was locked up, and they gave me a new one.
But now this one is doing the same thing. Occasional lock-ups when connecting to the MacBook Pro. Doesn't matter which USB port. And doesn't seem to matter if the computer has been on, or if it's a fresh boot.
What could be going on here? I doubt highly that both Classics I've gotten have the same exact issue with occasional lock-ups when connected to the computer. My MBP otherwise has given me no problems. And no problems with other USB devices, ever.
Any ideas?

Update: bought a new usb sync cable to try, and no change. the Classic locked up the first try with the new cable.

E55 System Error when connecting wireless

Hi Guys,
I bought a new E55 10 days ago and has been giving this "system error!" when connecting wireless network. any ideas to solve this problem?
Thanks in advance..

btw, i reinstalled and updated the software but still get the same error message.

I updated my IPAD 2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

I updated my IPAD2 to ios 7 and now it will not connect wirelessly or recognize my blue tooth devices

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How do you connect wirelessly to a Samsung smart tv?

how do you connect wirelessly to a Samsung smart tv?

If your're running 10.5.8 your MacBook is likely earlier than a 2009 model so you'd need a Mini-DVI adapter unless it's a model 5,1. We need to know which model you have. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up check the Model Identifier.
Depends on what input plug you'll be using on your TV. VGA, DVI, Composite or HDMI.
You'll need a Mini-DVI adapter and a cable from that to your TV. Here's the various types of Mini-DVI adapters on Amazon.com http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13
You'll also need audio cables to the TV for VGA, DVI or Composite. http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable
If you connect the MacBook using a MiniDVI to HDMI adapter you will probably need to use external speakers or a stereo system for audio. The Mini-DVI to HDMI doesn't carry audio and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with the HDMI.
P.S. Composite is the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs.

WRT54G locks up when enabling wireless network

So I have the WRT54G Ver. 6 latest firmware, just installed the firmware(1.02.2) The problem is when I go to enable the wireless network the router locks up and I cant access the router again until I power cycle it. I have waited about 20 minutes to see if it was rebooting itself but still nothing came up and I still couldnt access the router, or interenet. After power cycling the wireless is still disabled.
The steps I am taking is I log into the router, go to the wireless basic settings, select enable from the drop down menu. I have tried changing the SSID and leaving the default. I have tried selecting different channels and using the default and I have tried enabling and disabling SSID Broadcast. But all end up with the same result. I thought I would try here before calling tech support to see if anyone else had this problem.
The router is only a couple months old and when I first bought it the wireless was enabled, I just disabled it because we werent using it back then.

ya the easy setup button wouldnt work either. I just reset the router via the handy reset button on the back and that did the trick. Everything is working as it should now.

Dreamweaver CS6 - locks up when connecting to server - sftp

I am using Dreamweaver CS6 on Windows 7 64bit which is connected to a remote server using sftp. Most of the time connecting to the server has been fine but now Dreamweaver has started locking up when I use the Put command. According to the log the process times out but if this is the case surely the program would still be operational. However, when this occurs Dreamweaver is unusable and the task manager has to be used to force the program to close. When it happens regularly (as it is today) the program becomes unusable. The files I have been uploading when this occured today were between 5 and 20KB's.
Does anyone know how to fix this problem.

Hi,
Use Check-in/Check-out while transferring. This can be enabled as follows:
In the site settings dialog, go to advanced tab and check the checkbox "Enable check-in/check-out". Give a name and a user-id as well. Save the settings now and you can do a get/put or check-in/check-out and confirm does it works or not.
Thanks
Harshit

E4200 Connection issues with two Samsung Blu-ray players at a time

Hi everybody,
Sorry about my English,
I have E4200 V1 router, it is working fine, and I am connecting different type of devices with it like desktop computer, laptop, iphone, printer and two Samsung 3d smart Blu-ray players. Everything is working fine. I have charter cable internet.
But the problem is this: when I play movies via Netflix on both Samsung Blu-ray players (one player is in my family room and second player is in up stare bedroom) one player stopped playing movie and disconnected from the wireless network and message shows (check your wireless network).
When I stopped/turn OFF the second Blu-ray player, then the first one got connected with network and start playing movies.
I can’t run both Blu-ray players at the same time on this E4200. When I was playing both players at that time all the other devices I mentioned above was connected with the same network but were not performing any task, those were in sleeping mode.
I also changed the QoS, Quality of Service setting to high priority using MAC address for both players, but it is still not playing both Blu-ray players at the same time. Just one plays the movies at a time.
Any idea or help to solve this issue, I would really appreciate that.
Thanks,

Hi, chzsoona. Have you tried changing the channel of your wireless channel? You may try channels 1, 6, 9, 11. If you have a version 1 router, check your firmware version it should be 1.0.05. If you have version 2 router then you may upgrade it then use Linksys Smart WiFi so you can take advantage of the Media Prioritization. To know more about your router you may use this link: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=7824947fe4444ac3ad5cc...

Having issues with WRT54GS router acquiring network address after wireless connection.

I've been experiencing problems acquiring a network address after making a wireless connection with the WRT54GS wireless router. I have a Comcast cable modem connected to the internet port of the router and after configuring the SSID and the 64 bit WEP key, I can connect to my router's SSID, but since I can't get an IP address, never connect to the Internet. I've already cloned the laptop's mac address to no avail. Even after configuring a static IP address, subnet mask and default gateway, still cannot connect. I can Ping and Traceroute from the router but not the PC. I can ping localhost and host IP address from the laptop but not the default gateway. Any suggestions would be appreciated. Thanks, SJ

Connect the computer to the router with the Ethernet cable.
Try to access the internet when you connect the computer to the router with the Ethernet cable.
Open the setup page of the router and go to Status page. Check the Internet IP address on the status page of the router.
If you are able to access the Internet with the Wired connection to the router then try to create a new wireless network on your router.
Open the setup page of the router and go to Wireless tab. Change the wireless network name SSID and change the channel to 11. Save the settings. Go to Wireless security sub tab and check the wireless security settings. Click on Wireless MAC filter sub tab and make sure that it is disabled. Click on Advanced wireless settings sub tab. Change the Beacon Interval to 75, RTS and fragmentation threshold to 2304. Save the settings.
Try to connect to the new wireless network and see if that works.
How many wired and wireless computers do you have in the network?

IChat AV not working when connecting wirelessly thru Netgear router

Ok, I have read nearly EVERY forum out there about this issue, and I have tried nearly everything. I even called Apple. Noone can seem to figure out what the deal is.
I have a Netgear WGR614 v5, and it is connected to a modem that I got from RoadRunner (Time Warner Cable).
My cousin, who has a Mac identical to mine, is set up in the same fashion with a Netgear router.
Neither of us can get a video connection using iChat. When we click the Accept button, it says "Connecting to ...." and then we both get an error that basically says there was a "communication error".
I was informed of an Apple test address that I could test it with. AIM username is appleu3test03. I added it to my iChat buddy list, and clicked on the camera icon, and voila! It connected and I get an iPhone video (which is what is supposed to happen)
So, what EXACTLY is that supposed to tell me???? The Apple test site says that means there is no problem with my connection, but that the issue is on my end somewhere....but I don't understand how that can be.
Anyway, I don't have ANY firewalls on, and it works when I am connected directly with an Ethernet cable.
PLEASE!!! HELP!!
Thanks
Cynthia

Hi arvideo,
OK IS the UPnP on in this device ?
And no Port Forwarding or Services set ?
IS it the only device connected to the internet ? (is there another router or a modem ?)
1:18 PM Sunday; August 12, 2007

Router or PC when connecting a Wireless Printer

I have an HP7280 printer that passes the test to the router, so I assume its talking out. My PC is wired to the router. I cannot find the printer. Do you think this is in the router settings or the PC settings? Thanks

Make sure you have your Printer drivers installed on your Computer...

WRT54G: limited LAN access when connected to WAN

Dear community,
I am observing a strange behavior with my fresh WRT54G (v 5, latest firmware):
When the router is connected to the internet via PPPoE, some things just don't work anymore.
1. I power up my WinXP machine + after the login the machine requests a new DHCP-lease. This process takes about 40 seconds! If I pull the plug to the DSL-modem and repeat the same procedure my WinXP machine gets a lease _instantly_. I would guess that XP tries to get a reply from one or both of the DNS-servers that the router sends along w/ the DHCP-information, but why does it take so long?
All machines except for the NSLU2 get a dhcp-lease in the range 192.168.0.10 - 192.168.0.20 (255.255.255.0)
2. Browsing SMB-shares from my NSLU2 (for the first time) takes ages. Seems like XP is trying to resolve something in the background. I wait for about 20 seconds before anything is displayed. The phenomenon does not occur when browsing smb-shares using a mac os x machine.
3. Xbox MediaCenter cannot connect to the smb-shares on the nslu2 - as long as the WRT54G is connected to the internet. This is not a joke. I disconnect the router from the internet and I can browse my shares again. The problem goes further: If I use any file, say, I stream a movie, the router will not connect to the internet until I disconnect the client.
4. FTP to a server in the LAN only works in passive mode!
I thought that maybe I changed some setting on my clients so I hooked up my old cheap router just to find everything working properly again. Unfortunately linksys was not able to help me in this matter (I am still waiting for a response) - all they told me was that this shouldn't be the case because the WRT54G has a plain simple 4-port switch.
I have tried flashing various firmwares + performing hard-resets + revert to factory settings and starting all over several times.
I also found out that it doesn't matter wether its wireless or not so bothering with wireless security settings won't help anything.
Pinging the hosts on the LAN works. All clients can access the internet. It seems odd that I can access the internet and not be able to connect to an internal server, doesn't it?!
Has anyone had a similar experience? I would greatly appreciate any advice on this.Message Edited by appleholic on 07-05-2006 10:32 AM

Ok, I seem to have resolved the problem, though I'm not 100% sure how what I did resolved it.
I returned what appeared to be a defective unit to the store today and exchanged it for a new one. Got the new one home, got it plugged in and powered on and had exactly the same problem. I did notice that like the first unit, when the pings from the internal LAN would fail, the response about the TTL expiring in transit appeared to be coming from 192.168.1.196 which is the IP address assigned to my Linksys RT31P2 which is one of the two Vonage devices on my network (and which also happens to be a router though I'm not using it as such).
If I disconnected the RT31P2 from my network, the WRVS4400N worked as it should in that I could still ping the internal interface and access the web management pages while it was connected to the WAN. As soon as I plugged the RT31P2 back into my network, the WRVS4400N would exhibit exactly the same behaviour as before (no ping and no access to web management while connected to the WAN).
I can't recall exactly why but I did have the RT31P2 cabled up kind of weird. I had a cable running from the Internet port on the RT31P2 to one of the LAN ports on it, and had another cable from a switch connected to a second LAN port on the RT31P2. I've since recabled the RT31P2 such that I now have a cable from the switch connected to the Internet port on the RT31P2 and my Vonage line is up, and the WRVS4400N is still working as expected.
Bizzarre.

WRT54G router locks up when connecting wirelessly to a Samsung Blue Player

Similar Messages

Maybe you are looking for