WRT54G Routing Guide

I have a main router BEFSR41 v 4.2 which is connected to a modem this router is connected to a switch that share the internet connection i have another wireless router WRT54G v7 I am having problem configuring this router now. Anyone could please guide me how to connect this WRT54G to the network. Thanks
I tried ping other computer in network but it failed. Even pinggin from the router still failed. Hope I can get the answer from here. Thanks again

Don't click on the above link...Click here

Similar Messages

Having trouble setting up a linksys WRT54GS router with v...

Having trouble setting up a linksys WRT54GS router with verizon DSL using a westell 6100F modem. the modem works fine by its self but the router will not connect to the internet when installed like the cd tells you to.
online help and phone help has been less than helpful, anyone have any Ideas?

Ok I found " Installing the liksys wireless router with a westell 6100 modem" in the verizon troubleshooting guides. printed the instructions so I would'nt forget. step 1 open your web browser and enter http://192.168.1.1 in the address field. PROBLEM it comes up with a login screen that I don't know how to sign into. tried the obvious stuff. cannot get past the login screen. I knew this sounded to easy to be true. anyone have any ideas?

No Internet when connected to wrt54g router

I've seen that I'm not the only person to have this problem, unfortunately it doesn't appear that the question is answered satisfactorily in the forum. My laptop was connecting fine to an ambient wireless network in my apt building (yes I had wired internet but the computer would say "Wireless Connection Found!" or somesuch, so I know it was connecting to something). Eventually someone either lost the connection or secured it, so I lived with the wired connection for a while. Then a friend of mine gave me the WRT54G router & wished me luck. I have had nothing but trouble with this router - my computer says that it is connected to the router, I can even use the browser utility to do things like upgrade the firmware and change my settings. My computer works FINE with the wired connection, but the minute I try to route it through the wireless router, Internet is history. I have Verizon DSL, I would love to connect to my service wirelessly so I can listen to internet radio in other rooms without creating a massive safety hazard by stringing Ethernet cable through my entire house. I've tried everything that I could find online, including downloading a network diagnostics tool, but nothing is helping. I've done everything your site says, everything in the user guide, even things friends suggested to me. No luck. Any ideas? I'm almost ready to throw the router into traffic!

Thanks for the links, but these are both things I've looked into, and don't understand. I'm something of a newb when it comes to technical stuff on computers - I can use them, and screw around successfully with some of the system stuff, but unless someone explains to me what each odd abbreviation does, I'm lost. I've done the ipconfig /all in command prompt and come up with a bunch of stuff that I'm not sure will help me, I've played around in the router's actual configuration mode, it connects to my computer, and has the Internet light on, just my computer won't go online with the wireless router connected (with or without wires attached). It's like there's a little wall inside the router that won't connect my computer to the DSL modem. DSL modem works fine - all cables work fine, internet works without the wireless router in place. There's just something not connecting somewhere, and I don't know what. Everything externally is perfect. Everything internally SHOULD be perfect (everything's supposed to be automatically configured, right? Usually?). It's just not working.

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

WRT54G Router - Internet connection issues using the Ipod touch

Ok, first - here is my setup. I've got the router hooked into the modem, with the desktop computer hooked directly into the router. I've got my laptop running off wireless internet, and I've got an ethernet cable connecting through my laptop to an xbox for xbox live connection. I recently just got an iPod touch, and I've come to realize that whenever I'm on the iPod, it messes with the internet on the desktop computer and on the xbox, but not the laptop really.. it makes the internet really slow, or sometimes it doesn't work at all, especially on the xbox. Is there anything I can change to make these all work at the same time? Or is this too many connections or what? Please help. thanx.
(running windows vista home premium, WRT54G router, pretty much beginner status, though I can follow directions easily : ] )
Also, the internet always works on the ipod, it seems as though the ipod is 'taking over' the internet.. it doesn't lose it while in the area, yet the other computers and xbox does at times..
Message Edited by jmaxey0122 on 12-16-2009 05:27 AM

You might be facing the problem, because the Ipod and your Desktop computer must be having the same IP address thats the reason whenever your IPod is connected to your Network, your Desktop must be getting disconnected. Check the IP address of your IPOD and of your Desktop Computer.
First thing which you need to check, if the Physical connections are done properly. Connect the Modem to the Internet Port of the Linksys Router and then Connect the computer to the LAN Port No.1. On your Desktop computer login to the setup page of your Router and click on the Status tab and check "Internet IP address"
If required you can Re-Set your Router and Re-configure all the settings on your Router from the scratch.

How do I set up WRT54G router with 4 computers and WVC54GC Wireless Camera

Can anyone please tell me how to set up my Home Network with full security turned on?
I have at least 4 neighbors that show up on my wireless connections list. I have a daughter that loves music and is constantly downloading viruses but only on one wireless connection. The rest of us want to be protected from that computer. My system consists of the following:
One Linksys WRT54G Router
Two Linksys WMP54G Wireless PCI adapters,
Two Linksys WVC54GC Wireless Cameras (Possibility four if the 1st two ever work OK.)
Two Linksys LNE100TX PCI Ethernet Cards,
One HP Ethernet Printer
Three computers were connected by Ethernet cable and one was wireless. I did not change the admin password and I thought everything was working fine for a couple of years until I found that the wireless computer was acting as a “drone” and slowing everything down to a snails pace. It could even turn itself on.
I changed one of the Ethernet computers to wireless and decided that it might be time to also change the password and increase security. Setting up security completely shutdown the wireless drone computer. I was OK with that, at least until I can reformat that harddrive.
I then decided while I was at it, I would add a wireless camera (WVC54GC). I set it up using the software and Ethernet cable that came with it. After 6 tries I finally got the camera to work with the cable attached, but it does not work wireless and now none of the other computers connect any more. Is there a limit on how many connections? Should I reset the router and if so, do I disconnect the DSL modem? I’m afraid of the “drone” computer because I found some very bad malware on it. One in particular caused me to replace a hard drive.
I’ve read page after page of network stuff on the Internet and I guess I just don’t know how to ask the right questions. I’m tired of fooling with this.

hi , when u talk about security , are u referring to the "viruses" your daughters PC may be propogating to the rest of the network , or are u referring to external attacks on the router or your wireless PC"s ???
In case u are referring to the "virus" attacks , the best you can do is install a good antivirus software on all PC"s and keep the virus definations updated....
In case u are referring to the wireless security , i'd suggest that your use WPA2 personal. you can select WPA2 by going to the "wireless security" option.
let me know if u need anything more.

PS3 / Xbox 360 / PC Router Guide For GAMERS

Downloadable for Wordpad or Microsoft Word: http://www.filefactory.com/file/b1e67ga/n/Gaming_Router_Guide.rtf
Or just read below:
PS3, XBOX 360, PC GAMING
Router Guide and Modem Guide
Introduction:
Having issues trying to get your PS3, or XBOX 360 from Strict, or Moderate NAT? Want to get Type 2, "Open" status? Then follow this guide step for step.
(Please refer to your manual or other posts if you are unsure how to access a certain step, or post a quick reply on the forum. You can usually access your Linksys router via Internet Explorer by typing 192.168.1.1 - password is usually admin, username blank or admin as well.)
All of these steps were performed on the following test setup:
1 - Laptop PC (Windows XP)
1 - PS3 Console
1 - Motorola Cable Modem (SB6120)
1 - Linksys Router (WRT310N V1)
Firmware Update:
1)   Download the latest firmware for your router
2)   Install firmware onto router.
3)   Wait 1 minute after it has finished
4)   Unplug your Cable or DSL Modem's power, and ALL other devices that connect to the router. Leave them off.
5)   Click the "Reset to factory defaults" button in the router."
6)   Wait 1 minute after the lights stop flashing erratically.
7)   Physically go to the router, using a pointed object press the "Reset" button and HOLD for 30 seconds, then release.
8)   Access the router interface (example: 192.168.1.1)
Quick Tips and Information:
*The following settings are assuming you are now at "Default" settings. If you are not, than some settings may have been overlooked and you may have the wrong settings.
*You MUST use a WIRED connection for these steps. You can even use your PS3 or Xbox 360, and use the browser to access the router if your console is a wired connection. That is what I had to do, because my laptop is wireless only.
*The biggest mistake people make, is not clicking "Save Settings" at the bottom of each page, before moving to the next section. You MUST click "Save Settings" on each little page. Including the sub-pages. This is a huge deal. Even though the settings will "Stay" how you clicked them, they do not actually go into effect unless you hit "Save Settings" on every page.
*At this stage, any unnecessary devices must be turned off. Only the router and one device should be connected through wired Ethernet. Use that device to perform the following steps:
SETUP > Basic Setup
9)   Internet Connection Type: Automatic DHCP
10) MTU: Manual, 1500
11) DHCP Server: Enabled
12) Start IP Address: 192.168.1.2
13) Maximum Number of Users: 2 (set for how many devices you have. 1 laptop, 1 ps3 = 2)
14) Client Lease Time: 0
15) Time Zone: Set for your time, and "Check" automatically adjust for daylight savings.
*Click “Save Settings” before moving to another tab.
16) DDNS and Mac Address Cloning tabs should have "Disabled" option set.
*Click “Save Settings” before moving to another tab.
WIRELESS > Basic Wireless Settings
17) Change to "Manual"
18) Network Mode: Wireless-G Only (My laptop is wireless and has a G-card. Set accordingly)
19) SSID: set this to something you like: (example Pro Gamer)
20) Standard Channel: 11
21) SSID Broadcast: Disabled
22) Wireless Security and Mac Filter tabs should have "Disabled" option set.
      *Click “Save Settings” before moving to another tab.
WIRELESS > Advanced Wireless Settings
23) AP Isolation: Disabled
24) Frame Burst: Enabled
25) Basic Rate: All
26) Transmission Rate: 54 Mbps (I am using wireless G. Set accordingly, but do not use auto.)
27) CTS Protection Mode: Disabled
      *Click “Save Settings” before moving to another tab.
SECURITY > Firewall
28) SPI Firewall Protection: Disabled
29) "Uncheck" ALL options: Filter Anonymous Internet Requests, Filter Multicast, Filter Internet NAT Redirection, Filter          IDENT, Proxy, Java, Active X, Cookies.
      *Click “Save Settings” before moving to another tab.
30) VPN Pass-through tab: should have everything "Enabled"
      *Click “Save Settings” before moving to another tab.
APPLICATION AND GAMING > All Tabs
31) Skip this section for now, however if you did NOT reset your router to defaults before beginning. UNDO anything you         already have enabled on each of the five tabs.
ADMINISTRATION > Management
32) Router Password: change to something you use
33) Web Utility Access via Wireless: Disabled
34) Remote Management: Disabled
35) UPnP: Disabled. Including the 2 options below it.
      *Click “Save Settings” before moving to another tab
36) On the Diagnostics tab, click "Reboot" (may be located on very first page under “Setup”)
37) Restart whatever machine you are currently using to do this.
38) Turn on all devices that will be connecting to the router, except the cable/dsl modem.
39) Log into the router with your new password. On the first, page you should see "DHCP Reservation" click this. At the top, you should see one device named PS3-something probably numbers. If it is blank but there is an IP address, that is okay too. Click the box to the right side of it. Your other devices should be there too, such as laptops and consoles, etc. Click the box next to each of them. Then Click, "Add Clients" Now you have just assigned a Static IP Address without going through the hassle of doing it manually. Now you will always have the same IP Address for each device.
      *Click “Save Settings” before moving to another tab
40) Go to "Application and Gaming" click on the "DMZ" tab. Change DMZ to "Enabled."
Source IP Address: "ANY"
41) Now for the most important part. Most people use destination IP Address. However, if for some reason your IP address of your device changes, well then you are screwed. So instead, click MAC Address, then click "DHCP Client Table" and then "Select" the device that you GAME on, such as PS3 or Xbox360. Click "Close."
      *Click “Save Settings” before moving to another tab
***** IF you game on multiple devices, such as a desktop computer, and a ps3. You must DISABLE DMZ, and instead ENABLE UPnP. Please be sure to also enable the 2 options right Below UPnP. Many people do not enable the third, and sometimes even the second option. This causes hosting/joining issues, as the ports do not open/close properly. If you only have 1 gaming device, DMZ is the better choice. However, if you game on more than 1 device, use UPnP.
***** DO NOT ENABLE DMZ & UPnP TOGETHER.
42) Go to "Administration" > "Diagnostics" > "Reboot"
43) Restart ALL devices (Except cable/dsl modem) then connect them to the router.
44) I would connect my laptop now, by using the dell wireless manager I have, use the wizard to find "Non-Broadcasting"       devices. Then I manually type in my SSID: (Pro Gamer) it pops up. Click "Connect,” then "Lock" then "Apply"
45) For my PS3 I turn it on, go to Network Settings, then Connection Settings, "CUSTOM"
      Leave everything Automatic or "Default" except for these:
      MTU: 1500 / UPnP: Disabled (If DMZ is enabled on the router) / UPnP: Enabled (If UPnP is enabled on the router)
If your console (ps3/xbox360) was the wireless device, then simply select, "Wireless" and click manual SSID type "Pro Gamer" or whatever your SSID is, then continue with the rest of the settings. Security should be none/disabled.
ALMOST DONE!
This next tip is almost completely UNKNOWN by the gaming community. However, it is spectacular. Did you know the cable companies increase their speeds over time for FREE? Here is how to get your free upgrade. Even if your speed does not change, this will upgrade your Cable Modem's firmware! (DSL modems must be done manually, check online.)
Use a 7/16 wrench if connections are too tight.
While the Modem is OFF, unscrew the coax cable from the modem. PAY ATTENTION to this step. Now unscrew the other side from the wall or splitter. Then, REVERSE them. Reconnect the coax cable to your modem using the OTHER side (the one that was plugged into the wall), and vice versa. Make sure they are snug, but do not over tighten.
What does this do? Well I do not know the exact inner workings, but my friend who works for Comcast told me about this trick. It forces their system to re-register your Cable Modem. So now, you get a new IP Address, and it forces your modem to check for the latest firmware update. Along with that, come your increased speeds for FREE.
a)   Now, plug in the power to your modem. Wait until all lights are steady.
b)   Then go to your computer, (Do not use the PS3 or Xbox for this step)
c)   Type 192.168.100.1 (might be different for your modem, Google it)
d)   This is your MODEM's page.
e)   Look around for an option that says, "Reset to Defaults"
f)   Click "Reset to Defaults"
g)   Wait 30 seconds. It will not do anything.
h)   Now, you must click the other option, "Restart Cable Modem"
It will now clear out the memory, check for new firmware, get an updated IP address, and hopefully give you improved speeds!
That is all. Happy gaming! Visit www.speedtest.net and www.pingtest.net to test your connections.

Hey thanks for this, but one thing I have to ask is about the modem part. I unhook the cables and reversed them and then turned on the modem the lights are on and stable now. I have a sb6121 and when the modem is completely active it goes green, blue, blue, green, which is power, downstream, upstream and then online. But when I did what you said it is green, blue, "green"!, green. So since its different do I wait for the upstream to turn back to blue, or do I have to call comcast and give them the mac address again? I have been waiting for 5 mins so far and don't want to restore defaults and restart till I know I should for sure.

Linksys WRT54G router--Why doesn't it work with my Macbook?

I have a perfectly functional Apple MacBook (Unibody, late 2008) running Leopard 10.5.6. I have used it to connect to public Wi-Fi but it is unable to connect to my home Linksys WRT54G router. I called Apple Tech Support, and they suggested that I change the wireless channel and/or temporarily remove the WPA encryption. I did both, the computer still could not connect. In System Preferences on the MacBook, it tells me that "AirPort does not have an IP address and cannot connect to the internet." The tech support guy tried to help, but in the end basically told me that the router just plain might not be compatible with Apple products. (My iPod Touch cannot connect either.)
I can buy a new router, but this one works perfectly for the rest of the computers in the house (PCs) and they're expensive--and there's no guarantee that those will work either.
So: Does anyone know any solutions short of buying a new router that would make my Linksys compatible with my Macbook AND our home PCs? Or, failing that, a good, WPA-encrypted router that WILL work with both?
I have a Snow Leopard disk (I just received the computer on Thursday). Would upgrading to Snow Leopard be of any help? I'm planning on doing it anyway one of these days.
Many thanks in advance,
Sola Gratia

You are in the wrong forum but I'll try and help anyway. That model of Linksys router has a long history of not getting along with Apple products. That is not to say it will never work, but it does require that you download and install the latest firmware for the exact model of router that you have. There are multiple sub-models of that router so make sure that you get the right one.
Once you have done the firmware update, restart your router and try it again. WPA-psk should work but for troubleshooting purposes, turn off encryption and see if you can get your MacBook and touch working. You might want to use WPA2-psk instead of WPA.
I would hold off on Snow Leopard until you get WiFi working. Nothing like changing to too many things at one time to really mess things up.

Win XP SP3 PC wired to WRT54G router repeatedly crashes

I have a Win XP SP3 desktop that is wired (not wireless) to WRT54G router (v 3.0 router with latest firmware version 4.21.1).
The PC repeatedly freezes when I connect to internet using IE or Firefox and has to be re-booted using power button. The following are the 2 error messages from Event Viewer:
1) The AEGIS Protocol (IEEE 802.1x) v3.1.6.0 service failed to start due to the following error: The system cannot find the file specified - netevent.dll. Source of the error is Service Control Manager
2) The PCASp50 NDIS Protocol Driver service failed to start due to the following error: The system cannot find the file specified - netevent.dll. Source of the error is Service Control Manager.
Other details:
1) Vonage adapter also connected to router
2) This PC used to be connected to same router via a wireless-G adapter WUSB54G. That has been disconnected, Linksys software uninstalled and PC is now wired to router. The problem used to happen at that time also.
3) Router is setup with WPA-PSK security with TKIP and mode G-only.
Any help is greatly appreciated. I am at my wit's end.

I also would like to suggest that you download and experiment with another browser, Google Chrome or Opera and see if they are affected also. Their installation may refresh or reload the missing dll's.
ps. i am not a tech, i just play one on tv!
pps. free speech is a human right! join Reporters Without Borders (http://en.rsf.org/) and help save the planet from censorship predators!

WRT54G router IP address is the same as my modem's IP address. how to change the routers IP address?

The broadband modem got broken and the ISP changed it to a new modem. Now my problem is I cannot use the router when they changed the modem. The ISP won't provide support since they didn't provide me with the wireless router. I've read through the forum and found that I had to change my router's IP address. WRT54G router IP address is the same as my modem's IP address, 192.168.1.1. I already changed the local IP address of the router to 192.168.1.2, saved the setting, released and renew the ip address. Now, when I connected my internet modem cable to the router, I cannot connect to the internet. I am able to ping 192.168.1.2 but I cannot connect to the ping 192.168.1.1. Please help me do the proper setup.
Thanks!

Hello! I solved my problem but I find the solution so weird. After changing the routers IP address to 192.168.1.2, instead of plugging the modem cable on the Internet port of the router, I plugged it in one of the WAN ports. Presto, it worked. Even my wireless connection is also working.

Cannot connect Mac ibook to WRT54G router

I have a WRT54G router connected to my desktop. My Dell laptop connects without any problems. Now I am also trying to connect a Mac ibook to the same router. The Airport reads the connection, but it does not accept any passwords. The dropdown of connection options includes Personal WPA, Personal WPA2, Enterprise WPA, and others, but none of them accept my password. I have read some threads about downgrading, but I am concerned that if I make changes to adapt for the Mac, I might lose my Dell connectivity.

Use Firefox or Internet Explorer. Open http://192.168.1.1/ (if you have not changed the LAN IP address of the WRT54G), enter your password (default "admin" ) and you should see the web interface of the router. Click on Wireless. Post the current settings you have there. Then click on Wireless Security and also post the current settings you find there. That will tell us how you have set up the wireless on the router and then we'll see how you correctly set up the iBook for this.
Message Edited by gv on 06-04-2008 01:46 PM

WRT54GS router loses WAN DNS

I have a WRT54GS router that loses the WAN DNS from time to time. I go into the router and check the router status and the IP is set to a LAN IP address and no DNS entry. I release and renew the DNS and it picks up the WAN IP and DNS OK. This happens time to time.
At first I was powering everything down and then on – the router would NOT pick up the ISP DNS – always stayed with the LAN IP settings and no DNS. If I put a computer directly to the cable modem it worked OK.
Later I discovered if I went into the router status – releasing and renew would pick up the ISP DNS and stay until the next event.
I called Linksys and was advised to upgrade the firmware which seemed to help but this reoccurred again.
Any thoughts? Should I replace the router?
Linksys WRT54GS
v7.2.05 build 002, Jan. 9, 2008
(Mod note: Edited for guideline compliance.)
Message Edited by kent07 on 12-30-2008 04:37 PM

I have reloaded the firmware several times and with the support guy on live chat followed his instructions for a HARD RESET - the problem happened again after all that.
I see through web searches that a lot of people have the same issue but never really report a solution - just a lot of repeat suggestions.
Time will tell.
(Mod note: Edited due to non-compliance of forums guidelines.)
Message Edited by OnnagokorO on 12-31-2008 04:31 PM

Cant connect IPOD to linksys WRT54G router

Hi, i have a LINKSYS WRT54G router .. i bought an apple ipod touch recently and i am unable to connect it to my wifi network. My ipod detects the wifi network but when i select it , it asks for password. now i dont know which password is this bcoz everytime i poer on my computer or laptop i never type a password b4 accessing internet.. it is auto connected. i know the admin password for my router but that is denied by ipod to connect to internet. Is there any other password we have to give for connecting deveices through LINKSYS or some changes i need to do in my connection ? PLzz help plzzzzzzzzzzzzz

you can go to this link for instructions on how to get your wireless password:
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3698

WRT54G ROUTER CONNECTION PROBLEM

I have a WRT54g router.
Everything works great for a period of time even after turning the computer, internet modem and router on and off several times.
Then I turn everything on and the computer does not connect to the internet.
It go and connect the computer directly to the internet modem and I have internet access.
To be able to use the router again I have to reset the modem and input all the settings which I do with the setup disk.
I have been using channel six in case this makes any difference.
Any help will be appreciated.

connection DMS: HSD1.fl.comcast.net
IP address          :192.168.1.100
subnet mask      :255.255.255.0
IP address          :fe80::213:20ff:fec3:6913%4
default gatway    :197.168.1.1
ping                      : sent 4 received 4 lost
reply                      :bytes 32   time 1ms   TTL 64
It does not connect to the internet now but if I reset in the back of the modem and reload the setting via the original CD that came with the unit it starts to connect. Eventually one of the times that I power up it stops connecting to the internet although it still ping's out.
I also tried to load the update of the newer solfware but it does the same with or without the update.
Thanks for your help.
Guido

Linksys WRT54G Router set up

Hi, I recently got hold of a WRT54G Router and am trying to set it up....unfotunately, my knowledge of this kind of stuff is, lets say, basic! haha
I was wondering if anyone has set up this model (or any other model) with AOL as their ISP and if they could let me know what details I need to add or change on the set up page, and where to find it.
Some of the main info I know I need is the Host Name and Domain name, which I'm somehow having trouble tracking down. Also, I think I need to set it up as in PPOE (I think thats right...), but am not totally sure what account I'm initially dialling in with...
Any help would be brilliant! Thanks guys.

okay... connect the DSL modem >> router >> computer, try resetting the router back to factory default settings by pressing the small reset button on the back panel of the router...power cycle the n/w by unplugging the power cable of the modem and the router, wait for couple of mins. and power up the modem first, once the modem is rebooted power up the router...logon to the router's setup page, open I.E. and in the address bar type 192.168.1.1, it would ask for username and password, put "admin" as a password without any username, liksys setup page pops up...try changing encapsulation "automatic configuration DHCP" to "PPPoE" and try setting up username and password provided by the ISP and save the settings...click on the status tab on the router and try connecting to the PPPoE server....let me know the results

WRT54G Routing Guide

Similar Messages

Maybe you are looking for