Wrt54g set up help

I got it from a friend who was moving and he didn't need it anymore. I don't know what's going on with this thing but I set up the cables and everything correctly but once the set up wizard goes to page 7 or whatever it is when it checks my computer it asks for a password.... I don't know what password it is asking for. I tried putting my own password but it does nothing. I don't know what I'm doing wrong. It is pretty irritating.

if it will still not work, try to press and hold the reset  button using a pen or a paper clip for 1 minute.that would be a hard reset to restore the router into it's factory defaults.make sure while pressing and holding the reset button the power light should be blinking.it is an indicator that the router is restoring to it's factory default.after reset unplug the router's power source and wait for 30 seconds then plug it back in.if the setup CD will still not work, try to check if the computer already obtained IP address from the router which is a DHCP server.if still unsuccessful, you may need to do a manual troubleshooting.reply to this message if the setup CD wil still not work.to add, who's your internet service provider? how many PC and wat is the brand of your modem?that is one of the important factor to gather information to isolate further the problem and to avoid conflict regaring IP address of the network.

Similar Messages

  • My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

    my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

    Hello Prakharfromindia,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Wi-Fi settings grayed out or dim
    http://support.apple.com/kb/ts1559
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/ht1414
    Have a nice day,
    Mario

  • How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?

    How do I set the HELP menu to use Indesign's local HELP files on the hard drive and not the web?
    CS 5.0 launches the internet browser.  > TO SLOW I DONT WANT THIS.
    CS 3.0 uses the local help files > I WANT THIS FOR 5.0.

    You're not speaking to the right forum for your request. Help is a Suite-wide feature and here is the forum where the Help application is discussed, and where the proper Adobe people hang out:
    Community Help Application

  • How to set F4 help for an inputfiled of BSP page?

    hi friends,
    I have to set F4 help for a Field in my BSP page. for this i am doing like this.
    Oninitialization Event....
    tables : t001p ,pa0001 ,t554t.
    data : begin of it,
            awart like t554t-awart,
            atext like t554t-atext,
           end of it.
    data : it_t554s like it occurs 0 with header line.
    parameter : k_pernr like pa0001-pernr.
    data : werks like pa0001-werks,
           btrtl like pa0001-btrtl,
           abs_grp like t001p-moabw.
    clear it_t554s.
    refresh it_t554s.
    select single werks btrtl into (werks ,btrtl) from pa0001
                        where pernr = K_pernr.
    select single moabw into abs_grp from t001p where
                              werks eq werks and btrtl eq btrtl.
    select awart atext from t554t into corresponding fields of it_t554s
                                   where moabw eq abs_grp..
    append it_t554s.
    endselect.
    now it_t554s contails the values to display F4 help in BSP page inputfield.
    how to assign this as F4 help to inputfield....
    I saw some threads. It's getting me to confuse...
    I am new to this topic...
    plz help me.........
    Regards,
    Shankar.

    solved

  • HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    HP Officejet pro 8500 won't print and keeps asking for a proxy setting. Help.

    Hi,
    Can you confirm that you have an Officejet 8500a or Officejet 8500? On the 8500a model, you can set the networks proxy address and port setting from the front panel of the printer (setup>Webservices setup>proxy). If you are unsure what your proxy settings are you'll need to contact your network admin. If your network uses a proxy users name and password for all devices, you need to enter this information along with the proxy address and port in the printers embedded web server. Type the products IP address into an internet brownser window (printer must be connected to the same network as PC). Select the network tab, and than look for the proxy settings option. Enter in the information and click apply. Once the networks proxy information has been correctly inputed into the embedded web server, try printing again. If unsuccessfully, you might try reinstalling the printer software after uninstalling it. Hope this helps!
    I was an HP employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    I updated ipad 4.3 to io7 but now when I go to set up it keeps asking me to restore - I have done this from itunes several times but it still gets stuck at this point in set up - help!

    All media and apps should be in iTunes on the computer.  Simply select the content desired to sync to the device and sync it.
    FYI, backups have never included media or apps.
    Downloading past purchases from iTunes

  • I have a iphone 6 wont take all calls says mail box not setup but is set up help please

    i have a i phone 6 wont take all calls says mail box not setup but is set up help please

    Hello ram tough,
    Thanks for the question. After reviewing your post, it sounds like the iPhone is not receiving some calls. Are you having trouble with visual voicemail? I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
    If you can't make or receive calls on your iPhone - Apple Support
    Get help with visual voicemail on your iPhone - Apple Support
    Thanks for using Apple Support Communities.
    Have a nice day,
    Mario

  • Creating a score set - please help- I'm going crazy

    OK- deep breath ...........I'm trying to create a score set for 4 instruments. I read the manual, then tried everything on p 765........... I started first with the tracks in the Arrange area.- with and without rubber bands - and because this didn't work, I scrubbed this and tried to simply set up thew score in the Score Editor.
    It didn't work. I want to be able to see the music for 4 instruments - at one go -in the score editor. Is this possible ?
    Please someone save my sanity and give me an blow- by- blow account how to achieve this. I've been on this for hours and can't see the wood for the trees now so am going out for a breath of fresh air.
    Kay.

    You can look at the bottom of the arrange page.. But for 4 tracks I would open a score editor window by itself.. The score section is complex and not intuitive to say the least..
    In the score editor, click on the 6th from the left box. it looks like a page of text (when you highlite it will turn blue).. That shows you the whole score, in a tradional page format.. If you still see only one track, double click somewhere other than the track, (space in between). Page will toggle between showing one track/ and all tracks..
    To make life easier if you have many tracks to display = create a 'score set'. Label it, (band etc). reduce the size, 50 - 65% whatever. Then go under File in Logic, page set up.. Select the 90 turn, so now the pages longer side to side. You can see more measures at a time..
    You may want to have several score sets, to help with editing. One of everything. another to show just the piano and guitar, etc. This will make it easier to edit, copy paste between staves etc.
    The score editor is very powerful, if you take the time to figure it out, but documentation is vague

  • I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

    What brand/model USB drive? Is it bus or AC powered?
    On Mail...
    First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
    Users/YourUserName/Library/Mail
    Users/YourUserName/Library/Mail Downloads
    (Could be a different folder here if you chose such in Mail Prefs)
    Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
    /Users/YourUserName/Library/Preferences/com.apple.mail.plist

  • I am having trouble printing  and am only getting part of the document which i have no margins set any help??

    i am having trouble printing  and am only getting part of the document  i have no margins set any help??

    What version of Pages?
    What Printer?
    If it is Pages '09, turn Comments off.
    Peter

  • How to set local help as default in ID CS5?

    Just received a replacement laptop w/CS5 installed & cannot figure out how to disable/turn off community help...I want it to default to local help whether connected to the net or not.
    Thanks
    Update Info:
    Or, if setting local help as default is not possible, what about turning off or disabling internet sensing by the program?  This will be used in the field and sometimes slow connections are the only thing available.  Testing it on a dial-up connection, it just set there trying to access community help without allowing access to the local help until the dial-up connection was closed.

    Thanks Peter...I'd already found that, but when I first found it, the last section was not in that screen and in playing around, I found that Air was not installed proprly, uninstalled & re-installed that & that last section with the 2 ticks showed up & selected local help.
    Next, I get a message that there is no PDF reader installed...but a working copy of AR7 is & it works...I'm thinking that CS5 should be uninstalled & re-installed, however, that will have to wait until I can get the laptop back to the company we're working for.
    The community help window indicated the local help file to be 40Meg, but a search found no PDF that large on this machine.
    Is this PDF available for direct download & I'll just access it outside of the help screen if necessary.
    Laptop/program owner is in Canada, I'm visiting in Georgia & have an overseas flight on Wednesday...

  • Set search help dynamically to SAP Standard Screen

    Hi,
    I have one issue where I have to Create f4 help For a field present on SAP standard screen.
    Please advice how to do that.
    Can i dynamically set Search help in any screen-exit of the standard screen?
    Please help.
    Screen No is 130
    and Program is SAPLQM03.
    Here I want to attach a Zsearch help to a standard   FIELD RQM01-LS_KDPOS.
    Thanks,
    Ishani

    Hi Ishani,
    The field that you mentioned here in structure RQM01 is having a check table VBUP. So if some values are there in that table, then that will appear as F4 help to you. Consult with your functional and check how values are coming to this table VBUP. Othertahn this, I am afraid you will not be able attach any help.
    Regards,
    Abijith

  • I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

    I,ve got a retail box CS6 design, it will not auto run or start set-upexe, help.

    are you using a window's system?  if yes, which version?
    and, attach a screenshot of your disc's contents.

  • HELP !!!!! WRT54G Set To DHCP....not can't find

    Ugh,
    I inadvertantly set my WRT54G to DHCP from it's statis IP.  Now the 192.168.1.245 does not get me back in.  I have this hooked up thru WG switch to PC...how do I reset or find out what the IP address it is using and log back in to adminstrator ?

    I think you are using WAP54G, wireless access point. Just reset it for 1 minute, and it will again be set as static IP, with default settings.

  • Lost in the world of WRT54G...HELP

    Ok i am trying to configure a network using a SpeedStream Router 4200 with Windstream as an ISP. I can not seem to get both devices to work together. When I have the Linksys WRT54G connected i seem to have problems with my wired computer with Windows Xp and my laptop< a wireless g is installed as far as i know> which is also Xp. I keep losing connection.
    I have tried to figure out if I have not set something up in the linksys or I am not setng something up in the modem. Any help would be nice. I am new to the networking side of computers . I have assembled my Desktop computer.

    access the setup page of the router then change the "internet connection type" to automatic configuration DHCP, and you have to change the ip address of the router to 192.168.2.1 after saving the settings turn off the router for about ten seconds and plug it back again... see if its able to go online.... tell me if cant get online then we gonna move to the next step

Maybe you are looking for