Wrt54g troubles after moving.

At one apartment, I was able to use my wrt54g router for wireless internet with no difficulty.  I moved apartments and when i open up my macbook, it says i'm connected to the network, but trying to use a web browser proves that isn't actually the case.  Any help would be greatly appreciated.  

Follow the instructions in the manual and perform a full installation depending if you have cable or DSL connection.

Similar Messages

  • Trouble After Moving Catalog in LR 3

    Well I moved several catalogs to a folder in an attempt to get organized and now they won't open. I get the message that the folder can't be found. I tried moving the folders back to where they were originally but the link is broken. I followed the instructions on how to re-establish the folder link but the problem is it wants me to point to a folder of images and I did not save the raw files to the hard drive in the first place. All I have is the Lightroom files but no images. Any way to get this resolved?

    jsmith044,
    are you saying that you imported the RAW files from memory card into LR using the <Add> function in the Import Dialog? Only then would the RAW-files not on the hard drive.
    If you were importing using the <Move> function then your imaages are somewhere on your hard drive.
    Please understand that imported images are not in LR in the sense that the images themselves are in LR. LR stores all the changes in the catalog and it references this data in the catalog to the image files (RAW-files, Tiffs, whatever). So in order to safeguard your work you always need both: The LR catalog and the image files.
    If you cannot find your images on the hard drive - and do not look for them in LR - look for them with your OS (Mac Finder / Win Explorer and including the Trash / Recycle Bin)) then your images are gone.
    You can't bring them back as such but you can recover them from the previews in the catalog (if you have that catalog!). For this you need a program like "Preview Exporter" by Rob Cole. You'll find it on the LR Exchange website.
    WW

  • Can't open Numbers file after moving it back to Mac from Dropbox

    Please help!  Can't open Numbers file after moving it back to iMac from Dropbox.   Says I need the newer version of Numbers each time I tried to open the file.  I am 100% sure that I had the newest version.   Spoke to the AppleCare guy and after doing the checks he is also sure that I had the latest version of Numbers and AppleCare can't help.  He suggested that maybe i should run it on a file repair program...any suggestion?... please help...

    I've read reports of people having trouble when storing Numbers 3 documents on Dropbox.  I think it's related to the fact that they're not really "files."  They're "packages" that look like files. I had thought that Dropbox had cleared this up with their latest update. You should be on Dropbox version 2.4 or later.
    If you have Time Machine you may have some luck going back in time and restoring the document from a previous version.
    Storing Numbers documents on iCloud works much better, at least for me, and (unlike Dropbox) iCloud facilitates automatic syncing to other Macs and iOS devices signed into the same Apple ID.
    Perhaps you could consider keeping Numbers documents in iCloud instead. iCloud is deeply integrated into the app, and now works well.
    SG

  • SoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot

    NSoundBlaster X-Fi Driver Installation Fails After Moving Soundcard to New Slot4 I recently moved my X-Fi Elite Pro soundcard to a different PCI slot to accommodate my new large PCIE graphics card.
    Prior to moving the card, my?original SoundBlaster install went fine without any trouble. When I booted up after relocating the card,?it was not detected at all. So I uninstalled my SoundBlaster driver software and?rebooted the computer?thinking that was necessary to clear any hardware configuration settings from the old install. This made no difference. I then discovered my card was not seated properly and corrected it.
    Next I installed the SoundBlaster driver software. The installation proceeded and finished with a request to restart the computer. Once I did, the computer detects my card and starts the hardware installation wizard asking if I want Windows to search online for driver software. It does not recognize the just installed SoundBlaster driver installation. I have a dual boot setup and this happens in both WinXP Pro and Vista 32 Home Premium.
    What's wrong here?

    Forget it folks...couldn't wait for any suggestions so I just cleaned off my hard dri've and reinstalled everything. Works fine.

  • AirPort doesn't have a Valid IP Address after Moving

    After moving to a new apartment, I've been having a lot of trouble with my AirPort.
    At first, only my computer was able to connect, even though I kept getting warnings that it didn't have a valid IP address.  No other devises, including other computers, were able to connect.  Throughout this entire time, the airport light blinked yellow.  Then, all of a suddent, the airport light went solid green, and now I can't even connect wirelessly.  I've had a tech savy friend look at it, and I also tried a hard reset.  Nothing works.
    My building provides us with internet, including the Motorola modum (SBV5330 SURFboard) in my room.  Under networks, it says my SirPort is connected and has the IP address of 10.0.1.3.
    Can somebody help me?

    jschenmd wrote:
    able to reach ISP support who made me aware that the IP address is purposely set for one router so can't be changed out without their involvement.
    So your ISP has chosen to throw you into the "worst case" situation I mentioned above.  I don't know why ISPs do that.  If nothing else, it increases their support costs.
    He also convinced me to keep the linksys router stating that it was still an excellent device and unmatched in quality.  So, I guess I won't be changing to Airport! Any disagreement or benefit of the Airport over a linksys broadband router model wrt54gl v1.1 other than my being a fan of Apple products?
    I have no experience with Linksys equipment, but I suspect that it's no better or worse than most.  I also suspect that the support people at your ISP are guilty of recommending only what they know.
    If you already have that AirPort Extreme base station, I'd tell those people to stop jerking you around and update their configuration to let you use it.

  • After moving router, WiFi iPad shows old location

    After moving (about 100mi) and reconnecting to Internet, I fired up my iPad 1 (WiFi), and noticed it insists that I am still at the old location.  I changed the SSID for my WiFi access, but it did not help.  iPhone shows correct location, wheter on WiFi or 4G. 
    Is there a way to reset location information Apple holds?  Presumably it's related to my WiFi -- obviouly not the SSID, but maybe the WAP's MAC address?  Seems pretty silly that Apple would not be more clever here; what if I wanted to routinely carry my router between my main residence and, say,  a summer home... 

    Your iPhone shows the correct location because it includes a GPS receiver that makes use of A-GPS or assisted GPS. The assisted part uses location data available with connected cell phone towers and/or with an available wi-fi network with the location of the associated wireless router's MAC address that has been recorded/registered to help speed up the initial GPS acquisition from a cold start.
    The wi-fi only iPad does not have a GPS receiver nor a cellular data connection. It is relying on the recorded location of the router's MAC address for location services.
    Apple formally used Skyhook's service for this. Skyhook includes an option at their website to register the location for your router's MAC address with their database for location services.
    http://www.skyhookwireless.com/howitworks/submit_ap.php
    Note: User submitted data is processed immediately by Skyhook. For most devices, this will mean you should immediately see the difference in your location. If you are moving an existing access point in our system, it may take up to 7 days for the new location to take effect on the device. Depending on the update frequency of our partners, data entered here can take up to 7 days to be included in their results.
    I've read that Apple switched from using Skyhook's system for this to their own, but I don't know how this is updated in Apple's new system. A problem with this is it came under big time scrutiny not long ago in regards to privacy concerns. Google acquired this from available wi-fi routers while updating their street view maps - without anyone's knowledge or permission. Not sure if Google was fined but Apple came under some scrutiny as well.
    Point being, Google was "clever" and got into some trouble over this. If this is being done automatically with Apple's new system for this, it may take several days or longer for the new location for your router's MAC address to be updated.

  • ITunes freezes after moving library

    Hi all,
    After moving my iTunes library to an external HD (I followed the instructions...) threre are some music files (not all) making trouble. I can't play or delete them from iTunes. If I try to, iTunes freezes completely. Removing and re-installing doesn't have any effect so far.
    Thanks so much for your help!
    Duko

    I too moved my music libary to an external HD; however, I cannot see any music in iTunes? Suggestions?

  • T42 Display turns off after moving

    Hello everybody!
    I´ve got a problem with my Thinkpad T42 (2373fwg), XP prof. with the latest updates running. After installing the latest drivers for display (ati) and for "ThinkVantage Active Protection System " the display turns off immediately after moving the Thinkpad. I can turn the display on again only by reboot. The error appears even in a second after reboot, so it doesn´t concern to windows. The system doesn´t crash, it´s only the display. The problem might concern to the shock sensor, but I don´t know how to solve it.
    Does anyone of you has an idea?
    Thank you and kind regards
    Bill
    Message Edited by billyflinn on 01-26-2009 09:29 AM

    I have a similar problem: T42 (2373-5wg) Screen blanks. At first screen blanking was rare and seemed to happen when moving the pc, but now the screen blanks within 1-3 minutes after turning on the laptop, even if the computer is left untouched after being turned on.
    It is not OS related as the blanking appears even when in BIOS setup or booted on a liveOS CD.
    I can't tell for sure if the system crashes or not as the display goes blank (doh!), however, I have seen no reports of registered crashes in the visible part of the boot process.
    The screen blanking appears quicker (or even instantly) if the computer is warm (e.g. turned off just before being turned on).
    Blanking appears simultaneously on the LCD and on any attached external monitor, so I believe this rules out a defective LCD, backlight or inverter board.
    I'm thinking it's a failing graphics adapter or system board, or maybe a loose connection that causes a component to overheat and fail. But I don't know which or how to fix it.
    It IS out of warranty, of course. Any ideas?
    Thanks in advance,
    Niels
    EDIT: It seems this could be yet another case of badly soldered BGA chips that seems to be troubling the T4x series:
    http://forum.thinkpads.com/viewtopic.php?f=2&t=33952&sid=99545e4d13d9a94ce7496a5022690ed8&start=30
    http://www.technotaste.com/blog/thinkpad-t42-ati-radeon-9600-driver-and-the-blue-screen-of-death-bso...
    Message Edited by NielsCN on 01-26-2009 12:11 PM
    Message Edited by NielsCN on 01-26-2009 02:25 PM

  • Failed boot after moving hard drive (IDE not SATA)

    Greetings all.
    I am attempting to setup a headless box, and in doing so I am installing Arch on one system (Sapphire Axion A3-M275 Motherboard), then moving the hard drive to the new system (SGS1660, a VIA CLE266/VT8235 based headless rack-solution). After moving the drive into the SGS1660, the system fails to boot. Attached output from the Serial Console:
    Booting 'Arch Linux'
    root (hd0,0)
    Filesystem type is ext2fs, partition type 0x83
    kernel /vmlinuz26 root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b r
    o console=ttyS0,115200
    [Linux-bzImage, setup=0x3600, size=0x1ad6d0]
    initrd /kernel26.img
    [Linux-initrd @ 0x2ff21000, 0x9e7a5 bytes]
    Linux version 2.6.30-ARCH (root@T-POWA-LX) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000002ffd0000 (usable)
    BIOS-e820: 000000002ffd0000 - 000000002ffde000 (ACPI data)
    BIOS-e820: 000000002ffde000 - 0000000030000000 (ACPI NVS)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
    DMI 2.3 present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    last_pfn = 0x2ffd0 max_arch_pfn = 0x100000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009fc00 (usable)
    modified: 000000000009fc00 - 00000000000a0000 (reserved)
    modified: 00000000000e0000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 000000002ffd0000 (usable)
    modified: 000000002ffd0000 - 000000002ffde000 (ACPI data)
    modified: 000000002ffde000 - 0000000030000000 (ACPI NVS)
    modified: 00000000fec00000 - 00000000fec01000 (reserved)
    modified: 00000000ff780000 - 0000000100000000 (reserved)
    init_memory_mapping: 0000000000000000-000000002ffd0000
    RAMDISK: 2ff21000 - 2ffbf7a5
    ACPI: RSDP 000f6ad0 00014 (v00 ACPIAM)
    ACPI: RSDT 2ffd0000 0002C (v01 A M I OEMRSDT 09000521 MSFT 00000097)
    ACPI: FACP 2ffd0200 00084 (v02 A M I OEMFACP 09000521 MSFT 00000097)
    ACPI: DSDT 2ffd0390 03270 (v01 MiniV MiniV080 00000080 INTL 02002026)
    ACPI: FACS 2ffde000 00040
    ACPI: OEMB 2ffde040 00046 (v01 A M I AMI_OEM 09000521 MSFT 00000097)
    0MB HIGHMEM available.
    767MB LOWMEM available.
    mapped low ram: 0 - 2ffd0000
    low ram: 0 - 2ffd0000
    node 0 low ram: 00000000 - 2ffd0000
    node 0 bootmap 00011000 - 00016ffc
    (9 early reservations) ==> bootmem [0000000000 - 002ffd0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 0000626e44] TEXT DATA BSS ==> [0000100000 - 0000626e44]
    #4 [002ff21000 - 002ffbf7a5] RAMDISK ==> [002ff21000 - 002ffbf7a5]
    #5 [0000099c00 - 0000100000] BIOS reserved ==> [0000099c00 - 0000100000]
    #6 [0000627000 - 0000629230] BRK ==> [0000627000 - 0000629230]
    #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    #8 [0000011000 - 0000017000] BOOTMAP ==> [0000011000 - 0000017000]
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x0002ffd0
    HighMem 0x0002ffd0 -> 0x0002ffd0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0002ffd0
    Using APIC driver default
    ACPI: PM-Timer IO Port: 0x808
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    No local APIC present or hardware disabled
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
    NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
    PERCPU: Embedded 11 pages at c1606000, static data 24444 bytes
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194911
    Kernel command line: root=/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ro console=ttyS0,115200
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    NR_IRQS:512
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 1326.894 MHz processor.
    Console: colour dummy device 80x25
    console [ttyS0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Initializing HighMem for node 0 (00000000:00000000)
    Memory: 772708k/786240k available (2905k kernel code, 12976k reserved, 1052k data, 392k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf07d0000 - 0xff7fe000 ( 240 MB)
    lowmem : 0xc0000000 - 0xeffd0000 ( 767 MB)
    .init : 0xc04e3000 - 0xc0545000 ( 392 kB)
    .data : 0xc03d647f - 0xc04dd6a8 (1052 kB)
    .text : 0xc0100000 - 0xc03d647f (2905 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 2654.36 BogoMIPS (lpj=4422980)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
    CPU: L2 Cache: 64K (32 bytes/line)
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 10k freed
    ACPI: Core revision 20090320
    ACPI: setting ELCR to 0200 (from 8c20)
    weird, boot CPU (#0) not listed by the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (2654.36 BogoMIPS).
    net_namespace: 1056 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
    PCI: Using configuration type 1 for base access
    bio: create slab <bio-0> at 0
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: Power Resource [URP1] (off)
    ACPI: Power Resource [URP2] (off)
    ACPI: Power Resource [FDDP] (off)
    ACPI: Power Resource [LPTP] (off)
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.0: PME# disabled
    pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.1: PME# disabled
    pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:10.2: PME# disabled
    HPET not enabled in BIOS. You might try hpet=force boot option
    pci 0000:00:11.0: quirk: region 0800-087f claimed by vt8235 PM
    pci 0000:00:11.0: quirk: region 0400-040f claimed by vt8235 SMB
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    PCI: Using ACPI for IRQ routing
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:05: ioport range 0xe900-0xe90f has been reserved
    system 00:05: ioport range 0xea00-0xea0f has been reserved
    system 00:05: ioport range 0xeb00-0xeb2f has been reserved
    system 00:05: ioport range 0xec00-0xec7f has been reserved
    system 00:05: ioport range 0xe800-0xe83f has been reserved
    system 00:07: ioport range 0x3e0-0x3e7 has been reserved
    system 00:07: ioport range 0x4d0-0x4d1 has been reserved
    system 00:07: ioport range 0x800-0x87f has been reserved
    system 00:07: ioport range 0x400-0x41f could not be reserved
    system 00:09: iomem range 0x0-0x9ffff could not be reserved
    system 00:09: iomem range 0xe0000-0xfffff could not be reserved
    system 00:09: iomem range 0x100000-0x2fffffff could not be reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: disabled
    pci 0000:00:01.0: MEM window: 0xddd00000-0xdfdfffff
    pci 0000:00:01.0: PREFETCH window: 0x000000d5c00000-0x000000ddbfffff
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs...
    Freeing initrd memory: 633k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1248948860.509:1): initialized
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1510
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:01.0: disabling DAC on VIA PCI bridge
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Initalizing network drop monitor service
    Freeing unused kernel memory: 392k freed
    :: Loading Initramfs
    :: Running Hook [udev]
    :: Loading udev...SCSI subsystem initialized
    pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
    pata_acpi 0000:00:11.1: can't derive routing for PCI INT A
    done.
    Waiting 10 seconds for device /dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b ...
    Root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' doesn't exist, attempting to create it
    ERROR: Failed to parse block device ids for '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
    ERROR: Unable to detect or create root device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b'
    You are being dropped to a recovery shell
    Type 'reboot' to reboot
    Type 'exit' to try and continue booting
    NOTE: klibc contains no 'ls' binary, use 'echo *' instead
    If the device '/dev/disk/by-uuid/93df0562-c6e6-4583-9a79-51cd2091247b' gets created while you are here,
    try adding 'rootdelay=10' or higher to the kernel command-line
    ramfs$
    I think what is happening is that the kernel does not have the drivers for the IDE controller on the board for the CLE266/VT8235. Does this seem accurrate? And if so, how can I verify the current kernel config, then compile a kernel with everything else Arch needs to boot properly? I am familiar with the old means of setting up a kernel using the 'make menuconfig; make; make modules_install' etc method.
    Thanks for the help in advance!

    Hi, not sure if this is still causing you an issue, but I just ran into the same problem.
    For me, I have a Sharp PC=MM1110 which has no cd drive and doesn't like to boot from USB. To get Arch installed on it, I had to attach it to another PC (via it's docking cradle, which lets it show up as a USB hard drive), then boot the other PC from an Arch install cd and select the USB hdd for all of the partitioning etc.
    When I rebooted after the installation, the Sharp wouldn't boot.
    First, I had to edit the grub menu entry to point to (hd0,0), at which point I got the error listed in the first post... Failed to parse block device id's.
    If i booted into fallback mode, it booted without a problem.
    For me, the solution to finally get it working was to boot into fallback mode, remount the filesystem as r/w, and run mkinitcpio -g filename to rebuild the kernel. Once completed all I had to do was point grub to the new kernel image and it booted ok.
    Hope this is useful to someone

  • After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer. Does anyone have any advice on how to fix this issue?

    After moving to iCloud I can only get my email through the cloud, no new emails are making it to my home computer and .mac account. Does anyone have any advice on how to fix this issue?

    Welcome to the Apple Community.
    Which OS are you using.

  • I cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud

    i cannot find my contact info after moving to iCloud, i cannot find my contact info after moving to iCloud, i'm using PC

    Please try clearing cache and cookies. If that doesn't help you can try disabli9ng add-ons and see if it help. [[Safe Mode]] is to disabled add-ons.

  • HT4898 how do you syn mail after moving to icloud

    How do you syn mail after moving to iCloud?

    Yes, you can use iCloud mail with OS X 10.6.8. However you need to enter the account details manually using the Mail Server Information  

  • Wrong reply-to address sent from iPhone mail  after moving to iCloud

    I had this strange experience that shortly after moving to iCloud, one of my email accounts got mixed up with the reply to address.
    I use both accounts:
    - [email protected]
    - [email protected]
    When I reply to a message received in my xs4all account and send a reply (visually is in the mail the field From: [email protected]), the receiver will get a mail with reply address [email protected]
    So I noticed that all replies were sent to my gmail account.
    Has anyone else the same?

    Try SETTINGS, ICLOUD, click ACCOUNT field and scroll down to MAIL.  Click on MAIL field.  Here you can click on EMAIL field and a new screen of choices for default account comes up.  Choose your default account here.  Go back a page and you see ALLOW SENDING FROM and a list of allowed addresses to pick.  Choose all of the ones you'd like to be able to use.  HOPE THAT HELPS YOU.  Click DONE when you finish.  Tami

  • Email aliases gone after moving to iCloud

    Apple told me we'd be able to keep out email aliases after moving from MobileMe to iCloud - now only my main email address appears.  Is there any way to use the aliases?

    rephrase your question. I do not understand.

  • After moving the library, itunes shows less songs than music folder in finder does

         hi all.
    after moving my library manually, i have this situation:
    1220 songs in music folder;
    1091 songs in itunes.
    all the songs in itunes are regularly matched with the original file in the finder.
    now. how to find the 29 files which are not in itunes? i don't care why this happened !!
    thanks to all in advance

    in my itunes media folder there are not audio files! they are stored in music folder of the macintosh hd, as you can see from these screenshots. do you have any suggestion?

Maybe you are looking for