WRT54G - Unable to block a specific site

Hi,
I was looking at the access restrictions policies for my router, I created a new policy and added 2 urls:
1. www.cheese.com [This is a test, I've got nothing against the site]
2. www.imperiaonline.org
For some reason I don't seem to be able to block the second site, none of the computers configured under this policy can access the first URL but they can access the second. (So the Policy is working)
Is there something specific this website is doing which stops me from blocking it?
If anyone has any ideas of how I can block this website please let me know.
Any help you can offer is appreciated.
Kind Regards,
Morph

This could be an issue with the firmware of the router. If you do not have the latest firmware , upgrade it first. And then try to enable the Access Restriction again.

Similar Messages

  • Blocked from specific sites

    very weird. While connected to a site I frequent (moderate) I clicked submit (for a message/post) and received and coannot connect to server error in safari. Every other site associated with this URL is also inaccessible. BUT - ONLY these 4 sites are not accessible.
    Thinking it might be related to Safari, I tried Opera, Mozilla and Explorer. Same issue in all browsers. I can access every site normally but not the 4 particular sites.
    My ISP (WildBlue) says it is NOT them. All network preferences have been checked and confirmed as appropriate (and internet access IS working except for the formentioned URL's) The site owner says he is NOT blocking me. The sites ISP insists that the problem is not them or a DNS server issue. They all say that my Mac is the problem. (I access these sites 50 times per day for past several years from my macs w/o any problem unitl I clicked submit on a post)
    What else could be wrong. This is totally weird and driving me nuts

    I have a similar problem.
    A site I frequent (because I own it) is blocked from my mac. Also, any other site on my host's server is blocked as well.
    These sites are blocked in Safari, Firefox and Explorer.
    I am connected to the internet through a Netgear hub that two computers share. If I go and turn on the Windows machine downstairs, all the sites are accessible.
    This makes me quite sure that it is my Mac that is doing the blocking.
    I never set up any kind of blocking. One day I could get to my website, and the next day I couldn't. I upgraded from OS 10.2.8 to Tiger, and the problem carried over through the upgrade.
    I've been searching everywhere for a solution, but I'm totally baffled.
    iBook G3   Mac OS X (10.4.5)  

  • Wrt54gs unable to block websites urls by url or keyword

    I've entered keyword and urls, but none of them are blocking the websites intended. 1. yes i've saved the settings 2. yes i've cleared the browser cache 3. yes i've reset the router and restored the config file Any help would be appreciated. Bill

    I figured it out. To do this you'll need (I needed) to enter the list of PC's that the policy applies too. Not completely intuitive but makes sense now that I pulled my head out of my @ss. ;-) Thanks, Bill

  • How can I allow or block the use of local storage by specific sites for all users in my domain.

    How can I allow or block the use of local storage by specific sites for all users in my domain.
    I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
    What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

    Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
    How would that possibly do what I asked?
    You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
    Feel better, real soon.

  • Win 7 - No Tool Bar - Require a specific sit to allow block-ups

    Shows Firefox is 'blocking' a GRAPH coming on screen. I now find that it is a 'Pop-up'. Have used Firefox for several years with no problems - but not this site ! I have never ever seen a Firefox Toolbar and still can't now using Windows 7. Hoping that your Version 5 might solve the problem - I had Version 4 - I've down-loaded it this AM. I'm waiting to use these graphs, can you help me by un-locking this specific site ?
    Peter Browne - [email protected]

    Thank you. I've never known about the ALT key and I've never seen the Tool Bar before and I've been using Firefox since early Versions of 3 ? Perhaps, when it loads it should default to show the Bar ?
    Regards Peter Browne

  • I am unable to search my history in the Search History feature as when i type a term the history list goes blank labeling "no items." Is there a reason for this and a way i can search my history to find specific sites and content??

    When i try to search for specific sites whether to find something or group together a list of sites from the same site, etc, after i type in a term in the Search History box, nothing appears. When i click the empty area it says "no item selected" at the bottom. However i can still search my bookmarks. Just wondering if there's a way to fix this.

    It seems to have worked itself out. Thanks anyway!

  • How can I override pop-up windows for a specific site?

    In Firefox for Mac and Internet Explorer on a PC, you can turn off pop windows, but authorize specific sites to open a pop-up window.  Is there a work around in Safari?  The simple on/off switch (command-shift-k) is not adequate.  I'd like to use just one browser, instead of using one for general surfing, and another for sites I log into that open various pop ups as I navigate. 
    Safari is fast, but at a functional cost. 

    Adblock keeps popping up as a suspect in Safari crash logs, so I'm a little nervous about it. Glims seems to have a better rep for Safari-friendliness and I believe it offers selective ad blocking:
    Glims for Safari | www.MacHangout.com
    You can also try the Camino. browser, From the Mozilla crew, it is Mac-only and much leaner and faster than FireFox. The interface is very close to Safari, unlike FireFox's rather Windows-centric approach. You can selectively block or allow both cookies and pop-ups. It's my backup browser and my wife's primary browser.

  • How can I allow popups only for specific sites in Safari 7.1?

    I have popups blocked by default, but need to allow them for specific sites at work.  How can I do this without allowing them for all sites?

    Hi ..
    It's all or nothing with Block pop-up windows selected in Safari > Preferences > Security.

  • Allowing 3rd Party Cookies from Specific Sites?

    Is there a way to allow specific sites to use 3rd party cookies or is it all or nothing?
    Safari 7.0 (9537.71)

    All or nothing for Safari but Firefox cookies preferences allow enabling or disabling cookies for individual sites > Block websites from storing site preferences or login status in Firefox | Firefox Help
    Download Firefox — Free Web Browser — Mozilla

  • Unable to find top level site associated with project site

    Hello!
    SP and PS 2013. I faced the problem with one project and its site synchronization.
    When user published this project at 1st time, the site wasn’t created (there were some errors), but user didn’t notice that. So, after few days when he couldn’t open
    the site, he ask me for help.
    I did my usual operations in such cases – I open “Connected sites” and create the site myself.
    Earlier there was not any problem with that. But now this project experiences some troubles with permissions sync for
    it’s site – there is no synchronization.
    I connected this problem with November CU, which has been installed couple of weeks ago.
    I have read about the same problems after upgrade, so I want to emphasize that site was created on the root site collection (Project Web App) and it is not a subsite
    of another project site.
    If there is no solution until next update, maybe there is some way to turn off permission synchronization only for this site?
    Any help will be appriciated!!!
    Kate
    Queue error:
    GeneralQueueJobFailed
    (26000) - PreparePSProjectPermissionSynchronization.PreparePSProjectPermissionSynchronizationMessage.
    Подробные
    сведения: id='26000' name='GeneralQueueJobFailed'
    uid='231b2c2c-fc8b-e411-942d-0050569d3fac' JobUID='79031b2c-fc8b-e411-942d-0050569d3fac' ComputerName='7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20' GroupType='PreparePSProjectPermissionSynchronization' MessageType='PreparePSProjectPermissionSynchronizationMessage'
    MessageId='1' Stage='' CorrelationUID='a923d99c-8e88-c0e8-c7e2-08a980da8c96'.
    Для получения дополнительных сведений проверьте журналы ULS на компьютере
    7d8a1473-f6a8-4a8e-b7fb-1bdd868c7e20 для записей с JobUID
    79031b2c-fc8b-e411-942d-0050569d3fac
    In logs:
    12/25/2014 12:42:45.85        Microsoft.Office.Project.Server (0x07E4)        0x5E10           
    Project Server                            Sharepoint Integration           
    amed3 Exception        Unable to find top level site associated with project site Site1 System.IO.FileNotFoundException: <nativehr>0x80070002</nativehr><nativestack></nativestack>Нет
    веб-сайта
    с
    именем "/Site1".     at Microsoft.SharePoint.Library.SPRequestInternalClass.OpenWebInternal(String
    bstrUrl, Guid& pguidID, DateTime& pdtTimeCreated, String& pbstrRequestAccessEmail, UInt32& pwebVersion, String& pbstrServerRelativeUrl, UInt32& pnLanguage, UInt32& pnLocale, String& pbstrDefaultTheme, String& pbstrDefaultThemeCSSUrl,
    String& pbstrThemedCssFolderUrl, String& pbstrAlternateCSSUrl, String& pbstrCustomizedCssFileList, String& pbstrCustomJSUrl, String& pbstrAlternateHeaderUrl, String& pbstrMasterUrl, String& pbstrCustomMasterUrl, String& pbstrSiteLogoUrl,
    String& pbstrSi...   2a29d99c-9ecc-c0e8-c7e2-037970debfdf

    Hi Kate_S,
    since you are already aware that its a known issue caused Sep 2014 CU i believe, and an official fix has yet to release.
    but i would like to clarify here that this issue doesn't have anything to do with project site creation, because sync queue job while creating project site fails but does not block other queues activities. so your project site should be created in a normal
    way.
    and until official fix will arrive, 1 of the option is to change your project sites to provision under root site collection instead of PWA site collection. But be aware that this will fix sync issue only for new project sites.
    Go to Central Administratio -> PWA settings -> open site provision settings menu and made changes.
    2nd option is, since Project Owner always get access to Project site, to teach your project owners to include project team members manually to project site permission group to allow them to have access. this option can help you with both new and existing
    project sites, and i personally prefer this and did the same for my affected customers.
    Hope these 2 options will help you. 
    Khurram Jamshed - MBA, PMP, MCTS, MCITP (
    Blog, Twitter, Linkedin )
    If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Unable to Block Callers?

    Previously I had no problem blocking specific callers, but now that option isn't clickable from my drop-down menu. I've been receiving URGENT ALERT Spam calls (4x today alone!) and I'd like to block the caller, but am unable to. 
    I found that I would also be unable to block anyone on my contacts list, however I had done so twice before in the last year... How can I fix this? Why is this option still in my drop-down menu but unaccessible?
    Thanks! 

    Looks like this problem has been going on for quite some time. Starting to look like a bid by MS to remove an option that many of us need because of the high level of spam calls (hmmm.... kind of like hotmail!!!!). Maybe they want to start charging for this feature in the future ? In any case I guess its time to start looking for alternatives. Here is my list... GoogleVoice Voxox There are lots of others but these two provide a similar level of cross platform support of Windows, OSX and mobile devices. (Not sure about Linux). Looks like I will be canceling all of my paid Skype account features in the next few days. It was nice knowing you Skype while you lasted... I tried to reach Customer Support but all the web page would tell is that I need to type something... (Thats what it actually said !!!!) Really !!!! I filled in all the visible test fields on the form !!!! But the error message didn't tell me what or where. It was probably some type of captcha that my browser blocking was stopping but who knows ? Error message didn't tell me what.... so oh well.... Bye Skype

  • Launch Dreamweaver CS4 and open a specific site

    One of my stumbling blocks in moving from GoLive 9 to Dreamweaver CS4 is finding a way to have Dreamweaver open a specific site at launch time.  GoLive has a "name.site" file that contains site-specific information.  Double-clicking that GoLive site file launches GoLive (or switches to the running application) and makes that site the current/frontmost site.
    With Dreamweaver, I can double-click a page in a site and launch Dreamweaver.  However, Dreamweaver's active site is the one that was active at the end of the last Dreamweaver session.
    Is there a way to launch Dreamweaver and have it automatically open a specific site?
    -- Barney

    Say, if they do something like that for the already existing .ste files, then it might just encourage some people to export/backup their site definitions. Although I would probably never think to doubleclick one of them, that is still a good idea.
    Mark A. Boyd
    Keep-On-Learnin' :-)
    This message was processed and edited by Jive.
    It shall not be considered an accurate representation of my words.

  • I cant find a way to block a spacific site like i could with IE but i dont like IE

    i want to block specific sites becouse i live with imature idiots and i have the only computer. i just need to no where a place is in fire fox so i can paste blocked sites

    The simplest time-saving extension to keep you from accidentally visiting certain sites is at https://addons.mozilla.org/en-US/firefox/addon/4476

  • [CC] How to perform a script "foo_beforeSave.htm" only for specific site?

    Since a long time I use a script for automatic text replacements which perform with each save command.
    The script sits in that folder:
    C:\Users\myusername\AppData\Roaming\Adobe\Dreamweaver CC\de_DE\Configuration\Commands\foo_beforeSave.htm
    It works for all documents of all sites.
    The source code (the regex rule is just an example) of the script you find below.
    My question:
    I like to perform a script like this only for a specific site.
    I'm not a programmer. So I don't know where to place the script to reach that target. Or how I have to edit the source code of the script.
    Is there anybody who could help me with that please?
    I would appreciate it a lot. Thanks
    <!DOCTYPE HTML SYSTEM "-//Macromedia//DWExtension layout-engine 5.0//dialog">
    <!-- MENU-LOCATION=NONE -->
    <html>
    <head>
    <title></title>
    <script src="../Shared/Common/Scripts/dwscripts.js"></script>
    <script>
    function canAcceptCommand(){
        return true;
    function getFileName(url) {
      var index = url.lastIndexOf('/');
      if (index != -1) retVal = url.substring(index + 1);
      else retVal = url;
      return retVal;
    function runCmd(){
        var dom = dw.getDocumentDOM();
        dom.synchronizeDocument();
        var path = dw.getDocumentPath('document');
        if(getFileName(path) != 'foo_beforeSave.htm'){
            var docEl = dom.documentElement;
            var tempDoc = docEl.outerHTML;
            tempDoc = tempDoc.replace(/&bdquo;/g,'„');
            tempDoc = tempDoc.replace(/&#8222;/g,'„');
            tempDoc = tempDoc.replace(/&ldquo;/g,'“');
            tempDoc = tempDoc.replace(/&#8220;/g,'“');
            tempDoc = tempDoc.replace(/&rdquo;/g,'”');
            tempDoc = tempDoc.replace(/&#8221;/g,'”');
            docEl.outerHTML = tempDoc;
    </script>
    </head>
    <body onLoad="runCmd();">
    </body>
    </html>

    Well, the posted script is a full working one.
    I just search for a way to limit the range of the script to the actual site.
    Therefore it is unimportant, which regex is in the example.

  • Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    Why can't I update or load new apps on my iPhone and iPad. It does not ask me for my password. I tried to sync from my laptop now I am unable to connect to any sites from internet explorer. When I try to update or load any app it tells me it is corrupt

    You need to ask Apple for assistance with getting back into your old ID. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to resolve this issue through the Account Security team, fill out and submit this form.
    (118441)

Maybe you are looking for