WRT54G v.5 problem or somthing in the software
I have my software, downloaded and everything. I ran through the setup, plugged all the wires in, have all the led lights on that are needed, but after it tells me to check the lights and does the little loading thing, then it pulls up a window but the program always doesn't respond.
need help please
If this helps I have windows vista
Don't use setup program for installing. Follow these steps: connect your computer to one of the four ports on router using ethernet cable, and modem to internet port on the router. Login to router from a computer wired to router, by typing http://192.168.1.1 in address bar of browser, and login using password:admin, user name: dont type any. Go to wireless tab, here change wireless network name from linksys to any other name. Go to wireless security sub-tab here change security mode to WEP, make sure encryption level is 64 bits. And here in key 1 box, enter a ten digit number, and this ten digit number will be security key of your wireless network. Click on setup tab at top. then click on MAC address clone sub tab. Enable that service and click on clone your PC's MAC button and then save the settings. Now reboot modem and router.
Similar Messages
-
Hi i have an ipod 4th gen. the problem is when ever i try to sync my iPod to my computer a mesage comes up and says that the ipod can't be backed up. There wasn't a problem until I upgraded the software. How do I fix this??
Try here:
iOS: Troubleshooting backup issues in iTunes -
I have tried everything I could locate. I am using a 4S and had not a problem prior to updating the software!!! I need to text images alot due to my job. I am going crazy!!!! Any suggestions????
SMS is a carrier feature, what did your phone carrier say when you contacted them about your issue?
Double check you have MMS turn on in message settings. -
Problems when I Install the software
When I install the software show an error . error says:
HKEYLOCALMACHINE/software/QuickTimePlayerLib.quickTimePlayerApp Verify that you have sufficient acces to that Key, or contact your support personnel......
Please .....If someone can help me send me an email .. my email is .. [email protected]?????Say step by step ??omg i have the same problem! someone please help us! por favor...=]
-
I uninstalled Adobe Reader X to address a problem and cannot reinstall the software.
I uninstalled Adobe Reader X to address a problem and now I am unable to reinstall the software. Ideas?
OK - you can download the standalone installed for Adobe Reader directly from the Adobe FTP site.
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/en_US/
Save the executable file onto your computer and then double-click on it - the installer should run as normal.
If you want to install a different language, go to this address instead:
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.2/ -
I have iphone 5. Updated to new software a few days ago, but I was having this issue before the update and the update did not resolve the issue.
I can send and receive regular text messages. I can send MMS (photos, videos, etc) but I CANNOT RECEIVE photos in texts. I have read several trouble shooting suggestions, but so far no resolution. Open to any and all suggestions! Thanks!You cannot update iPhone 4 to IOS 8.1.2, the highest you can update is IOS 7.1.2.
Unless you've iPhone 4S (looks similar to iPhone 4) -
HT1414 Who has a problem after you download the software update ?
SO it downloaded but when I say install now , it doesn't install
What happens when you tap Install Now?
A error message? Nothing? Flash?
You can try restarting the phone then try to install it again.
Restarting your device
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider.
Press and hold the Sleep/Wake button until the Apple logo appears.
If that doesnt work then try resetting it
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
http://support.apple.com/kb/ht1430
you may even need to connect to iTunes and try updating it from there. -
Where is the software for the Lenovo G550???
I want to do a clean install and replace the pre-installed Vista with Windows 7.
I see that the Lenovo G550 download page has drivers for Windows 7, but where is the pre-installed software, like Veriface, camera software, and all other pre-installed Lenovo software? I looked at all OS options for the G550 on the download page, and NONE of them had the G550 laptop software, all they had for each OS option was only the drivers.
I understand that I can make a recovery DVD, but as I understand it, it will return the system to the factory fresh state (all pre-installed programs installed, but also with the factory installed VISTA - yuck!). I didn't see any option to only re-install the Lenovo software without also re-installing the OS.
When I look at the download pages for other Lenovo laptops, I see that they have drivers AND SOFTWARE, but the G550 has no software except for the drivers. Since the G550 came with no software disks, and there doesn't seem to be any of the software online, how exactly does one do a clean installation of an operating system, and then re-install the Lenovo software, on a G550?
I was able to find downloads of programs like Veriface on the Lenovo site for different laptop models, but unfortunately those were much older software versions, and for a different Operating system.
Why can't Lenovo post all of the software online? If they aren't going to provide the software on DVD when they ship the PC, then they should at least have it online; so that people can do a reinstallation if necessary. DELL doesn't seem to have a problem putting all of the software for their PCs online, and they also provide it on disk with the PC.
Do I have to find the hidden backup partition and then copy the Lenovo software installation files to a DVD or different drive myself? Has anyone done this, and if so, can they please provide some assistance as to the best way to accomplish this task?
If there is a different/easier way to accomplish my end goal of a G550 with a Windows 7 clean install, and also with a re-installation of all pre-installed Lenovo software, I would be extremely grateful for any assistance. If there is also a way for me to select which factory software I wanted to install, that would be even better ( I don't need all of the crapware that came on the PC)
Thanks in advance,
SvenThanks, I'll give that a try when I finally get the Windows 7 upgrade disk.
It seems ridiculous that Lenovo doesn't support this product for Windows 7, especially when they mentioned the "FREE" upgrade (with ridiculous "shipping and handling charge") to Windows 7 on the web page where I ordered it. Being a reasonable person, I assumed that when they offered a "Free" upgrade to Windows 7 with the PC, they would also provide the basic software to allow the built-in hardware like webcams to keep on functioning as they did under Vista.
Had I known that they would refuse to offer any software on disks or download, I would have ordered a DELL or some other PC that has a reasonable level of customer service. I am not a typical user; I don't call in for customer support. All I need is the software and drivers, and I will install it myself. -
Capture TS interrups because of the Software Updates
I have seen this in different CM12 enviroments with W7 SP1 and W8.1 capture image TS, that software updates step stops or interrupts the execution of Task Sequence, so the next step never run. I saw Microsoft KB article of KB patches which create double
boot, but none of listed patches are applied and I´m still suffering from this.
Main question is, what is the effective way to track down this issue? I tried to fallow Event Viewer -> Setup and disable last patch which was installed, but even this does not help.
I believe this is a common problem.Hi,
Cannot use the software update feature of Configuration Manager to install these software update?
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
You mean, to install updates in deployment TS? I´m trying to create the most updated image, that during deployment phase there would be minimun amount of patches. Now there is like 100 of them. -
Can't find the software for MSN Premium with Windows 7 64-bit
Got a new PC, using Windows 7 64-bit. Tried to download the MSN Premium software like I had on my previous PC. It tells me my system does not meet the minimum requirements for MSN Premium. I searched diligently but can't find where this problem has been addressed. Thought I could download from the MSN site but it redirects my right back to the Verizon site.
Any help appreciated.mab57 wrote:
You may want to call Verizon tech support. After I upgraded my computer to Windows 7, I called them & they gave me aURL for a web site where I downloaded & installed the MSN Premium software. I don't remember the URL for that website, but I had no problem installing and using the software. I have Windows 7 Home Premium 64-bit & it works fine.
Wont do you any good anymore. Verizon has pulled down the link. MSN premium has been discontinued by Microsoft. They discontinuted it when they started windows live. MSN premium is no longer supported by Verizon or Microsoft. Its a use at your own risk program and if it doesnt work, you are on your own. But all "official" download links have been discontinued.
====================================================================================
Error exists between keyboard and chair. -
What are the software issues with installing a 2nd SSD on my mac mini (Late 2012?)
Hi Everyone,
I've just bought a brand new Mac Mini server - 2.6GHz, with a 256GB SSD.
I have also bought a 512GB SSD from Crucial, along with a Dual Drive Install Kit from OWC, and will probably be installing it myself.
I've read a lot of info on various forums/websites that is a little concerning.....regarding data loss when you reboot the Mac having installed the new SSD (not sure if this just applies to adding the SSD to a system that contains a 'normal' HDD.....)
If I'm going to have 2 SSDs in my system, I guess there are 2 questions:
1. Can I just add the new 512GB SSD without any reboot issues
2. Is it important to keep the system SSD physically where it is, i.e. at the bottom of the Mac (and plugged into the same connection on the logicboard?)
Thanks in advance for any help!Thank you so much John and woodmeister50, most helpful
Just one more thing - the crucial drive came with a data transfer cable (SATA to USB) - I haven't got my dual drive install kit through the post yet...so do you foresee any problems with me installing the software that I will be using on the 512GB drive, in preparation for it being internally installed - is that possible to do with this cable?
Thanks again people! -
WRT54GS Router torrent problem on 2 PCs
Hiya. I recently connected 2 PCs to a WRT54GS ver6 Linksys router. The PCs each use a WUSB54GS ver2.1 adapter to connect to it. Everything is fine, however I'm having a problem with torrents being limited on one PC. The first PC connects fine, everything runs smoothly and fast. However when I try to connect to the same torrent with the other PC, its greatly limited. Its never given full access, and whereas normally it would have 20+ seeders, I'm lucky to get 2. Download speed on the first PC is 100kbps, whereas the second is 5-20kbps. I've looked around the internet and been unable to find this specific problem. It seems as if 1 PC has been giving the OK by the router, but the other is being throttled back for some reason. Does anyone know how I can fix this? Thanks
Running peer-to-peer software is a known cause for router slow downs and disconnections. When a "torrent" is running, it will typically make over 100, and often over 200 connections. The router must keep track of all these connections. The router has a limited amount of memory to work with, so this leads to router slow downs and disconnections.
If possible, have only one computer running torrents at a time. Additionally, you can go into the peer-to-peer software and reduce the number of connections that the software can make. This effectively limits the impact that the torrent is having on the router, and this sometimes helps.
Alternatively, if one of your computers has this "slow" problem even when torrents is not running on the other computer, then perhaps you simply have a poor wireless connection. This can happen even with a 100% signal strength. There are many things that cause poor wireless connections:
First of all, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also set "SSID Broadcast" to "enabled". This will help your computer find and lock on to your router's signal.
Poor wireless connections are often caused by radio interference from other 2.4 GHz devices. This includes wireless phones, wireless baby monitors, Bluetooth (including Bluetooth game controllers), microwave ovens, wireless mice and keyboards, wireless speakers, and your neighbor's wireless network. Even some 5+ GHz phones also use the 2.4 Ghz band. Unplug these devices, and see if that corrects your problem.
In your router, try a different channel. There are 11 channels in the 2.4 GHz band. Usually channel 1, 6, or 11 works best. Check out your neighbors, and see what channel they are using. Because the channels overlap one another, try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, try any channel 1 through 4.
Also, try to locate the router about 4 to 6 feet above the floor, in an open area. Do not locate it behind your monitor or near other computer equipment or speakers. The antenna should be vertical.
Hope this helps.
Message Edited by toomanydonuts on 07-02-2007 03:51 AM
Message Edited by toomanydonuts on 07-02-2007 03:53 AM -
Vista - WRT54G Wireless Router Problem
I'm sure your all tired of answering this question or variations of, but here we go. I have a WRT54G V.6 wireless router running a hard wired pretty new Hp Pavallion With Vista Home premium. It's running an AMD Athlon 64 X2 Dual Core 5000+- 2.60 GHz w/ 1918 Megs of RAM. Problem 1.) is connection. For whatever reason it just seems to drop my internet for no reason. I then reboot the system to get back. This work MOST times. Problem 2.) is the speed. To open a web page seems to take in excesively long time, 30 -45 seconds on avg. per page. I HAD an old dell also connected to the system wirelessy that ran flawlessy, although it did run XP. And the speed was great. And now connect wirelessly with my work comp with no problems at all. Speed is great and connectivity is stable. SO why am I having such a problem with this router on this OS? I would love some help with this or a work around to get connectivity and speed workable.
Thanks in advance for any help with this.
Message Edited by Calm2Chaos on 12-28-2007 02:12 PM
Message Edited by Calm2Chaos on 12-28-2007 03:59 PMCheck the firmware on the router ..... if required upgrade .... download the latest firmware from http://www.linksys.com/download....
After upgrade reset & reconfigure the router .... -
WRT54g router DHCP problems (I think)
I just got a wrt54g wireless router for my organization hooked it up and started having problems. I set the router to use DHCP and *tried* to set the “Maximum Number of DHCP Users:” to 15 and clicked “Save Settings” but when I went back to that screen it would be back at the default (5), I have since tried to change it many more times and no matter what number I pick (2-230) it still shows up as 5. Anyway. 1st I connected my XP notebook and was able to access the internet (specifying that my computer obtain the IP address automatically) Next I connected my colleague’s vista notebook and he could access the internet. (specifying that his computer obtain the IP address automatically) Next I connected another colleague’s xp desktop (specifying that my computer obtain the IP address automatically) *Next* I tried another colleague’s XP notebook computer and started having problems. I specified that it should obtain the IP address automatically but it would not and kept getting a 169.254.x.x address instead of one like 192.168.1.x (it also keeps showing a subnet mask different from the one I specified on the router). I went back to my notebook (which had been working fine) and discovered that now (without my making any changes to my notebook) I am having the same problem. I am now having the above problem (computers not receiving addresses automatically) with all but one or two computers (the vista notebook continues to work). Someone on usenet suggested I try putting in an IP address manually so I did and it worked but #1 I need more than 5 computers to be attached at one time (the router refuses to accept any number higher than 5 [though I can specify *less* than 5, it will for example remember 4 and 3]) #2 The router should be assigning IP addresses to all the computers, I shouldn’t have to be putting in the addresses manually.
Did you try to flash/reflash the routers firmware? Try that and reset the factory default settings and cycle the power. Then reconfigure the router and let us know if it continues to do that.
Richard Aichner (Ikester) -
WRT54G VER 6 delayed response when using the web (Old WRT54G VER 2 works fine)
Very strange problem. I have had a 2yr old WRT54G VERSION 2 and it (still) works perfectly except I broke the antenna (I don't even use the wireless side). I just got a new WRT54G VERSION 6 and am having weird problems with it. I have the same problem with THREE DIFFERENT REV 6's (Staples hates me by now) but the old REV 2 always works fine when I swap it back in:
With the REV 6 version when I click on any web link or web site from My Favorites there is like a 5-10 second delay before anything connects. Just dead air for 5-10 seconds with ANY click of the mouse in IE7. When I swap back the old REV 2 version the connection is immediate and fine. If I do a PING it takes 5-10 seconds for the ping to start then it goes fine with the REV 6 but the REV 2 pings out immediately. Same problem with speed-tests. It takes 5-10 seconds to start but the results are fine on the VERSION 6 but the VERSION 2 is fine. I tried the latest firmware and the settings are the same on both router versions. I find it hard to believe I have 3 bad WRT54G REV6 routers but yet the old VER2 one continues to work fine. Comcast says it isn't their problem (and I agree) yet 3 bad routers seems highly unlikely.
One thing I have noted. The INTERNET light on the Version 2 WRT54G blinks at a "leisurely" pace, but the INTERNET light on the 3 VERSION 6's all blink at a tremendously fast rate, probably 5x faster then the REV 2.
For now I'm back to the old Version 2 WRT54G.
Any ideas why 3 Version 6's basically don't work and an old VER2 works absolutely fine (except for the broken antenna).
All routers have most recent firmware updates.
Message Edited by MisterEd on 01-30-200711:02 PMHas to do with the version 6 routers lack of memory, it gets overloaded with packets so it slows down or just stops working. Usually unplugging and plugging back in temporarily fixes it. Do a google search for versions 5 and 6 you will see its a common problem.
The reason your version 2 works better is it has twice the memory. After version 4 they switched from Linux operating system to VXWorks. Supposedly works better with less required memory. Can they be more wrong? LOL
If you want the same performance out of a WRT54G series router look at getting a WRT54GL v1.1. Made with the same specs as versions 1, 2, 3 and 4.
Just checked my GL, coming up on 50 days online without a reboot.
Message Edited by wehowardjr on 01-31-200707:06 AM
Maybe you are looking for
-
Hi all, I want to add to this code with an elseif Will it work to put in before the else in the udf.cfm code below the following? TIA: elseif (referer contains 'yahoo.com') StartPos=ReFindNoCase('q=.',referer); if (StartPos GT 0) { EndString=mid(refe
-
LINE OF BUSINESS WISE P&L, BALANCE SHEET .
Dear Sap Gurus, I in my project, business wants LOB(Line of business) wise P&L accounts and balance sheets,is it any posibility to do the Z report, We have LOBs like---TTSL,TSKY,VOTAS etc I any posibilty pls give suggestion It si very urgent. T
-
Hello experts, I'm working on cross company STO process. I have setup the org structure P. Org., Slaes org, DC, Division, SIte-DC, Site store and customer for the store too (DC in Company code B and Store in Company code A). While creating STO gettin
-
Hi Experts, Can any one solve this problem. How to link web properties(URL) to smartforms. What is the use of webproperties in Smartforms. Thanks & Regards, Kumar.
-
What do the grey dotted circles mean?
Hi, I'm trying to add some cds I imported into my iTunes onto my phone but it won't let me. When I plug my phone in to sync I click on this iPhone and the songs I want are highlighted with this grey dotted circle?