WRT54G V1.1 Cannot go on-line

I have a WRT54G and I cannot go on-line. I have th epower light steady, internet steady, and Wlan steady, Port 1 steady. I have Cable service and I need the Settings for the Router to work. I have also tried to go the router's page 192.168.1.1 but I do not have access to it. Please help me
ito56

Maybe you changed the default ip address of your router, try to reset the router and then re-configure it... Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router... As you have a Cable ISP follow the link here

Similar Messages

Cannot record through line-in in bootcamp MBP late summer '09 model

cannot record through line-in in bootcamp MBP late summer '09 model
audio source (mp3 player) <3.5mm male input-------------3.5mm male input> line-in to macbook pro late summer 2009 model bootcamp windows xp sp2
when i select microphone in the audio panel - it works
when i select line-in and plug in the 3.5mm jack input to 3.5mm jack input to a fm radio for ex. it doesn't work
how do i make the line-in work?
i remember that when i first installed mac osx sl and windows xp bootcamp - the first couple of times around when partitioning the hd - the line-in worked a couple of times, in between times somewhere along the line i made some change to the spdif settings ?? or driver / to make the red light that comes on in the line-in jack go away - the other method was to use a toothpick to push a tiny button inside the jack, did that once -but the redlight came back again after a restart on bootcamp side.
thanks in advance,
-r

Although I don't use it, the Line-Input jack should require a signal about 40dB higher than what a microphone alone puts out. If your cable only adapts the connector and does not provide amplification, I'm not surprised you get nothing. If you are lucky, you MIGHT get a low signal by going into System Prefs/Sound/input/line-in and turning the input level slider all the way up. But the real answer to to get a mike preamp or mixer, or a mike with line-level output. Some products take a mike input and convert it to digital into the USB port.

SAP CRM - Genesys: ICI: Cannot register phone line

Hi,
I am working on SAP CRM to Genesys integration over ICI and I am stuck at the first step. We have Genesys setup and I have followed SAP instruction on configuring SAP CRM in site /people/john.burton/blog/2009/11/11/how-to-implement-computer-telephony-integration-cti-with-the-sap-crm-interaction-center
However I get the following error as seen on ICI trace.
Exception CX_CRM_MCM_EXCEPTION
Exception text General error in the multichannel layer
Message class CRM_IC_APPL_UI_CHMSG
message number 551
message Cannot register phone line
Program name CL_CRM_MCM_SESSION============CP
Include name CL_CRM_MCM_SESSION============CM01P
row number 78
The ICI trace error is
<?xml version="1.0" encoding="UTF-8" ?>
- <SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
- <SOAP-ENV:Body>
- <SOAP-ENV:Fault>
<faultcode>Server</faultcode>
<faultstring>fault. see details</faultstring>
- <detail>
- <IciErrorCodes>
<areaCode>2</areaCode>
<errorCode>15</errorCode>
<errorText>1 is not available</errorText>
<errorRetry>false</errorRetry>
</IciErrorCodes>
</detail>
</SOAP-ENV:Fault>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Has anyone come across this issue and what would the possibel issue be?
Best Regards
Loy
Edited by: Loy Pereira on Jul 19, 2010 10:29 PM

HI,
We resolved the issue. It was Genesys config. It was defined as user defined seating instead of free seating.
Regards
Loy
Edited by: Loy Pereira on Jul 20, 2010 11:49 AM

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

Can not port forward on WRT54GS v6 "You cannot use the router IP"

Hello, I'm trying to open a port number, but when I try to use my router's IP, the following message appears
"You cannot use the router IP, network, or broadband address"
[IMG]http://i45.tinypic.com/107qond.jpg[/IMG]
My ADSL was working as a NAT behind a NAT connection, so I had to change my Local IP Address to 192.168.2.1.
Router: WRT54GS v6 firmware 1.52.8 (latest) - Bellsouth router: Westell 6100
Microsoft Windows [Version 6.1.7600]
Ethernet adapter Local Area Connection:
   Connection-specific DNS Suffix . : launchmodem.com
   Link-local IPv6 Address . . . . . : fe80::40a9:a76e:61b3:6435%11
   IPv4 Address. . . . . . . . . . . : 192.168.2.100
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Default Gateway . . . . . . . . . : 192.168.2.1
So, please help me, how can I open ports on my router? =[
PS: I tried to use 192.168.2.100, and even though it lets me use it, it still seems not to open that port... my IP is dynamic.

Generally: NAT behind NAT is a bad idea. There is usually no need for double NAT. Either configure the ADSL router as bridge and use the WRT for your internet connection or set up the WRT as simple access point behind the ADSL router.
It's also unclear to me what is working or not. First I thought you can't set up forwarding at all because you get that error message. Then, in your PS you write you tried to use 192.168.2.100 and that seemed to be possible. The IP address to forward to must be the IP address of the computer to which you want to forward. Thus 192.168.2.100 is exactly the IP address you have to set up. Does this work or not?
Also remember: with double NAT you must set up two forwardings: first on the ADSL router then on the WRT. Port forwarding is necessary to allow incoming traffic through NAT. All incoming traffic arrives on the ADSL router. Thus setting up port forwarding on the WRT only won't do a thing.
It's also not recommend to use dynamic IPs for forwarding destinations. Dynamic IP addresses may change over time and that requires you to adjust forwardings accordingly. It's better to reserve fixed IP addresses (if your WRT supports this) or set a static IP address on the computer outside the DHCP address pool.

Receive ping throw WRT54G setup but cannot display web-pages.

Hi
I have a WRT54G router, connected to the same DSL modem for 4 years and everything was fine till last week. Since last week, i cannot display any web pages, despite the fact that i am connected to my ISP (it was checked with there support team).
I have 3 different laptops and 1 desktop with different browsers and different OS (XP, VISTA) on them and same antivirus (AVAST!).
I receive pings from all the laptops and desktop to the router (ping 192.168.1.1), which mean that they connect probably to the router
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administrator" tab and then under "diagnostic" tab, But I cannot display any web pages.
Does any one might know what may be the problem?
Thank you.

Thank you for the quick respond.
I connect the computer directly to the modem and it work just fine.
When I ping throw command prompt in the computer (connected to the router) I receive the next massage "bla bla bla o recevie bla bla 5 packet loss or something".
I was able to receive ping from different websites throw the router setup (192.168.1.1) under "Administration" tab and then under "diagnostic" tab.
The problem was solved yesterday by updating the firmware and reseting the router with the reset button.
Very wired.
Anyone have any idea what may was the problem?

Cannot Add new line using BI IP query

Hi All,
We have created a planning application (BI IP Query) and used it in VC 7.1 model using BI Query Wizard service. Now we are able to customize existing rows ( existing rows are using flat file upload)... we can able to change the existing record values and save it.
But we are not able to add new line... its going to dump... We are able to add new line using WAD with same query but not in VC 7.1
This issue is same as below 2 threads...
Re: How to create new records through a VC form in an input-ready query??
Re: Cannot add new records through VC form when consuming IP write back query?
Thanks,
PradeeP

Its working now... SAP has given the fix (patch) for this issue when we deployed it, everything is working fine... I think they will release this fix (patch)soon...
Raise an Sap OSS message for solution

In Reminders on IOS7 on IPAD a Black Line has appeared around line 17/18. I cannot enter more lines after this

A mysterious Black Line has appeared in one of my Reminder sections on the Reminders App on Ipad 4. It is around Line 17/18.
It does not at the moment appear on my iphone using the same app
Has anyone else experienced this problem?

I have the same problem, and have for many mounth now, searched for an alternative til iOS Reminders which can sync. to Exchange, but we cannot find one. We use Tasks in Outlook very much.
We have several iPad's with the problem, and we can not solve the problem.
Apple will NOT listen to us, they just say we have to restore the system, but it does not solve the problem!!
Very frustating.
Now the Microsoft Surface 2 look, like a good alternative, and we will go in that direction. We cannot live with thi issue.
Apple is NOT for bussiness.
/Ib

WRT54GS v.6 cannot enable security mode.

hey guys,
I've tried everything, even a firmware upgrade and I've been using IE and I cannot enable any security. anytime I try to select WPA or WEP or anything it refreshes automatically back to "disabled". I've tried multiple resets as well and am extremely confused....this is a new comp. but it seems odd for that to be a problem.
thanks and best,
Adam

After a firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you have not done this since the last firmware upgrade, please do this now and see if it corrects your problem. If you saved a router configuration file, DO NOT use it. You must setup the router from scratch.
See *** RESET TO FACTORY DEFAULTS *** below, for how to reset your router to factory defaults.
If the above does not fix your problem, then you probably have a communication problem between your computer and router. To fix this, do the following:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
How to do a *** RESET TO FACTORY DEFAULTS ***
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is likely dead. Report back with this problem
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. Report back with this problem.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.
Message Edited by toomanydonuts on 06-05-2009 03:08 AM

Application Server cannot render arrow line style?

I am using MapBuilder(10.1.3.1) to create a line style with arrow. It rended perfect in MapBuilder.
The xml style is below:
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc/>
<g class="line" style="fill:#000000;stroke-width:2.0;marker-name:M.LEFTARROW;marker-position:0.0;marker-size:15">
<line class="base"/>
</g>
</svg>
Then I apply this style to my themeBasedFOI, add to MapView and then deploy to Application Server(10.1.3).
var mapView;
function showMap() {
mapView = new MVMapView(document.getElementById("map"), baseURL);
var basemap = new MVBaseMap("bbui.CENTRAL");
//Add a base map layer as background.
mapView.addBaseMapLayer(basemap);
//Set the initial map center and zoom level
mapView.setCenter(MVSdoGeometry.createPoint(mapCenterLon,mapCenterLat,8307));
mapView.setZoomLevel(mapZoomLevel);
//Add a scale bar
mapView.addScaleBar();
//Add a navigation panel on the top-left side of the map
mapView.addNavigationPanel('west',true,false,false);
//Add a copy right
mapView.addCopyRightNote("@2008 powered by Delcan");
//Add an overview map as a collapsible element inside the main map
ovcontainer = new MVMapDecoration(null,null,null,200,150) ;
ovcontainer.setCollapsible(true);
mapView.addMapDecoration(ovcontainer);
var over=new MVOverviewMap(ovcontainer.getContainerDiv(),3);
mapView.addOverviewMap(over);
//Add theme base FOIs
addThemeBasedFOIs();
//Display map
mapView.display();
//Add Map Viewer Event Listener
mapView.addEventListener("mouse_click", mouseClick);
mapView.addEventListener("nouse_right_click", rightClick);
function addThemeBasedFOIs(){
var travelTimeFOI = new MVThemeBasedFOI("travelTimeFOI","bbui.TRAVEL_TIME");
travelTimeFOI.enableInfoTip(true);
mapView.addThemeBasedFOI(travelTimeFOI);
when I browser my map, I got a popup error:
Cannot process the following responde from FOI server:
<?xml version="1.0" encoding="UTF-8"?><oms_error>[Foi Server]foi process error: null</oms_error>
Then I am going to Application Server Log, and find the following exception:
08/11/11 10:45:58 INFO [oracle.sdovis.CacheMgr2] Creating/replacing a geometry cache group: sdovis_subreg_spatial_jdbc:oracle:thin:@10.10.10.9:1521:bbui : TRAVEL_TIME_GEOMETRY_PDT_GEOM.
08/11/11 10:45:58 ERROR [oracle.lbs.foi.FOIServlet] java.lang.NegativeArraySizeException
     at oracle.lbs.foi.foiUtil.calculateHtmlLineArea(foiUtil.java:306)
     at oracle.lbs.foi.foiUtil.getLineStringAreaStr(foiUtil.java:1096)
     at oracle.lbs.foi.FOIServer.getHTMLMapString(FOIServer.java:855)
     at oracle.lbs.foi.FOIServer.renderFOILayer(FOIServer.java:555)
     at oracle.lbs.foi.FOIServlet.doPost(FOIServlet.java:178)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
08/11/11 10:45:58 ERROR [oracle.lbs.foi.FOIServlet] [Foi Server] foi process error.
I will appreciate if you figure out what's wrong?
Best Regards,
Joyce

I am using MapBuilder(10.1.3.1) to create a line style with arrow. It rended perfect in MapBuilder.
The xml style is below:
<?xml version="1.0" standalone="yes"?>
<svg width="1in" height="1in">
<desc/>
<g class="line" style="fill:#000000;stroke-width:2.0;marker-name:M.LEFTARROW;marker-position:0.0;marker-size:15">
<line class="base"/>
</g>
</svg>
Then I apply this style to my themeBasedFOI, add to MapView and then deploy to Application Server(10.1.3).
var mapView;
function showMap() {
mapView = new MVMapView(document.getElementById("map"), baseURL);
var basemap = new MVBaseMap("bbui.CENTRAL");
//Add a base map layer as background.
mapView.addBaseMapLayer(basemap);
//Set the initial map center and zoom level
mapView.setCenter(MVSdoGeometry.createPoint(mapCenterLon,mapCenterLat,8307));
mapView.setZoomLevel(mapZoomLevel);
//Add a scale bar
mapView.addScaleBar();
//Add a navigation panel on the top-left side of the map
mapView.addNavigationPanel('west',true,false,false);
//Add a copy right
mapView.addCopyRightNote("@2008 powered by Delcan");
//Add an overview map as a collapsible element inside the main map
ovcontainer = new MVMapDecoration(null,null,null,200,150) ;
ovcontainer.setCollapsible(true);
mapView.addMapDecoration(ovcontainer);
var over=new MVOverviewMap(ovcontainer.getContainerDiv(),3);
mapView.addOverviewMap(over);
//Add theme base FOIs
addThemeBasedFOIs();
//Display map
mapView.display();
//Add Map Viewer Event Listener
mapView.addEventListener("mouse_click", mouseClick);
mapView.addEventListener("nouse_right_click", rightClick);
function addThemeBasedFOIs(){
var travelTimeFOI = new MVThemeBasedFOI("travelTimeFOI","bbui.TRAVEL_TIME");
travelTimeFOI.enableInfoTip(true);
mapView.addThemeBasedFOI(travelTimeFOI);
when I browser my map, I got a popup error:
Cannot process the following responde from FOI server:
<?xml version="1.0" encoding="UTF-8"?><oms_error>[Foi Server]foi process error: null</oms_error>
Then I am going to Application Server Log, and find the following exception:
08/11/11 10:45:58 INFO [oracle.sdovis.CacheMgr2] Creating/replacing a geometry cache group: sdovis_subreg_spatial_jdbc:oracle:thin:@10.10.10.9:1521:bbui : TRAVEL_TIME_GEOMETRY_PDT_GEOM.
08/11/11 10:45:58 ERROR [oracle.lbs.foi.FOIServlet] java.lang.NegativeArraySizeException
     at oracle.lbs.foi.foiUtil.calculateHtmlLineArea(foiUtil.java:306)
     at oracle.lbs.foi.foiUtil.getLineStringAreaStr(foiUtil.java:1096)
     at oracle.lbs.foi.FOIServer.getHTMLMapString(FOIServer.java:855)
     at oracle.lbs.foi.FOIServer.renderFOILayer(FOIServer.java:555)
     at oracle.lbs.foi.FOIServlet.doPost(FOIServlet.java:178)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
08/11/11 10:45:58 ERROR [oracle.lbs.foi.FOIServlet] [Foi Server] foi process error.
I will appreciate if you figure out what's wrong?
Best Regards,
Joyce

ADT cannot seize phone line after fiber installation

I had my phone line switched over to fiber today and now my ADT system cannot "seize" the phone line. It will call out properly but if you are in the middle a call and the alarm is activated it will not disconnect the current call in order to make it's own call out to the monitoring center. Of couse this was working before.
I talked to the tech that installed the fiber and he said his only responsibilty to me was to provide me with a dial tone, period. I also called Verizon tech support and talked to three different people who all told me it was ADT's problem. So now I have to call ADT and incur a fee to have them come out and fix it. So much for Verizon's promise to me that an upgrade to fiber would not cost anything.
Is there anyone is this forum that may have experienced a similar problem? Any help greately appreciated.
Solved!
Go to Solution.

armond_in_nj wrote:... Verizon Digital Voice (if that's what you have and it seems likely that's the case) is capable of using typical alarm system components to transmit alarm system data. Usually the data is transmitted using what's called "Contact ID" data, and usually the connection between the alarm system and the telco lines is handled by a simple device called an RJ31X connector. I suspect that's the case for ADT, but you must check that with your monitoring company ...
Some further thoughts on the issue. Here's a link to demonstrate what's involved in the RJJ31x wiring scheme:
http://wiki.hometech.com/tiki-index.php?page=How+to+Wire+an+RJ31X+Jack
As you can see it appears little "hairy" and in fact there's really only one way to do it correctly. Of course that's what alarm technicians are for, and there's no need for the average user to get into the details.
After thinking about this a while, it occurred to me that what has probably happened in your case is that the VZ install tech never went near your RJ31x connection. He (or she) just did what a normal install requires and got things working. However there are certain requirements for the alarm setup to operate correctly.
The RJ31x mustt be the first device in line after the phone line comes into the building. In old terminology this means that it must be wired in directly after the NID (network interface device) where the phone company hooks up to your house. In this way the alarm can take over the line for all phones downstream.
However with FiOS Digital Voice, this is probably not how your house was connected. I.e., the install tech can connect to your interior phone wiring network at any point and still get all the phones to operate correctly. What doesn't happen in such a case is the alarm is not able to control all the phones downstream, because some of the phones aren't really "downstream."
As convoluted as this seems, the way out is simple: the alarm company must pay a visit and make sure that all your phones are connected (from the VZ ONT) after the RJ31x. This should be pretty easy, and it's really on the alarm company to make it work.
Let us know what you decide and what happens (using your personal service ticket mentioned by Lawrence). Once again, good luck.

Cannot edit signature line for this forum

I have tried the Edit My Account link but cannot find WHERE I would edit the signature line that gets added to my posts (such as this one).
Reason: I have recently added additional credentials and thought it would be nice to add it to my signature line. But can't find where it make that edit.
Can anyone help?
Todd C - MSCTS SQL Server 2005, MCITP BI Dev 2008 Please mark posts as answered where appropriate.

In left pane from Quick Access choose My Settings
then Profile signature
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

IPhone can join WRT54GS network, but cannot connect to internet

I've got a WRT54GS v.1.1 router w/latest firmware (4.41.4). My wired and wireless computers (windows XP) can connect just fine and see the internet. My iPhone 3GS can join the network, but cannot see the internet. The phone can join the network, gets a DHCP address/gateway/DNS info just fine. Other machines on the local network can see the phone and vice-versa. However, any time the iPhone tries to reach out to the internet, a message pops up saying "Safari cannot open the page because it is not connected to the internet".
Again, other machines on my network can connect without issue. My iPhone has no trouble connecting to other WiFi networks.
I've tried all different wireless encryption schemes, including no password/encryption, with the same results each time. I've also tried using a static IP address on my phone. No luck. MAC filtering is disabled, as is any other access restrictions.
Finally, I've reset the phone's network settings, reset the router to its factory defaults, and tried everything else I can think of.
I've only seen one similar message one these boards with this problem, but it was never responded to. Anyone seen this before of have other suggestions?
Thanks in advance for any help.
David

Thanks for your response!
IP: 192.168.1.100 (DHCP-assigned)
Subnet: 255.255.255.0
Gateway: 192.168.1.1
DNS: 66.218.44.5, 66.218.44.90 (the DNS's of my ISP)
Router's (local) IP address is 192.168.1.1
Router's internet-facing address is the one assigned by my ISP via their DHCP
All looks right to me.
-David

WRT54G ver.7 Cannot Connect ...

I am having trouble using WRT54G on my server. Still i have no internet when i connect my PROLINK ADSL2+ Modem/Router to my LINKSYS WRT54G router. The process is this 1. I run the CD first, 2. I connect the modem cable to the internet port of Linksys router, 3. I connect the LAN cable on the 1st port of the router (from 1,2,3,4) and connect it to my LAN on my server. 4. And continue the instructions from the CD. Still it says that no internet detected at all. I tried to reset my Linksys router several times but still cannot connect. I tried to use Easylink from Linksys.com but still cannot detect any internet connection. I tried to reset my dsl modem as well and no internet connection detected again. I tried to configure some items on my linksys router but i am not successful doing it again. My Linksys router is set in DHCP Automatic configuration then my routers IP is 192.168.1.1 and the other is in default settings. I dont need to use some username and password to connect on my internet because it is plug and play only. If i only use my modem connected directly to my server, there is internet connection but when i use my router there is no connection at all. Is there any configuration can you suggest to make my router functional when i use it?

Well tell me who provides you with the internet service if its a Cable or DSL connection accordingly i will give you the information....all you need to do is check if you are able to go online with the modem if yes then you need to connect modem to the interner port of the linksys router & then from any one of the four ports on the linksys router you need to connect a cable to the pc & you will be able to go online without any issue.

I have a WiFi connection from an international hotel, but cannot get on line even though my laptop wireless is working fine. I have the Cell off. Also tried Airplane Mode ON and WiFi On. Any suggestions?

I am using WiFi for my laptop from the hotel room in an international location.
I have tried everything but cannot get my iPhone5 to connect to the internet from the room (where room # and name need to be entered first) OR the lobby (open WiFi).
Cell is off, Roaming is off.
I tried turning phone off, turning on with Home button pressed to reset, Forget Network and re-connect. No luck.
A friend has an iPhone 5 and it works just fine.
Any suggestions?

Catch 22
I need Safari to get to that first page so I can do that!
I am already logged on via the laptop, and can add the iPhone if Safari could only get to the first page!!
The lobby wifi is open, and doesn't need the sign in page, but I can't get to the Internet even though it seems to have connected to the hotel's wifi.

WRT54G V1.1 Cannot go on-line

Similar Messages

Maybe you are looking for