WRT54G V3.0 Web Access

I have a v3 wr54g router.
I have changed default pw
I cannot connect to it remotely.
I am using latest firmware 4.2 [I believe} from linksys.
I have tried resetting the router, it still will not let me connect remotely.
Is there an issue with the firmware? or could my router be going out?
I have double checked the pw and ip address.
I think that this web access problem i also the problem behind me not being able to connect to my Radmin server on my desktop via the internet.
Any help is appreciated......

As you are using Sudden Link DSl connection ..... try this settings ....
1. Reset the router
2. Press and hold the reset button for 30 seconds.
3. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
4. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
5. Release the reset button.
6. Please access the setup page of the router by launching an Explorer and type on the address bar, 192.168.1.1 and press enter. It shows the username and password screen leave the username blank & provide password as “admin "" all in lower cases and then click on ok.
On the main setup page select the "Internet Connection Type"
as "PPPoE”. Then provide the username and password provided by your ISP
(Internet service provider) for your connection ......click on the Save Settings button.
7. Click "Status" ...click connect & is will show valid Ip address ....
If so try going online....
Let mek now if it works ....

Similar Messages

WRT54GS v5.1 Download issues (web access is fine) - is my router dying??

Been having intermittant problems with this router for some time, usually a reboot will suffice. Web access will last all day long, but the second I start a download I pretty much always instantly lose my connection, and the computer will not recognise the router even after turning it off. I have to reboot the pc and the router and then things are fine again, until I try to download again.
I think my problems started when upgrading my virgin broadband to 10mb, although like I say it first it was brilliant and I could download at line speed (or at the restricted rate with virgin) for hours on end.
Is there any settings on the router which will help? I have tried capping speeds on my download manager but I still get dropout.
Is there a newer firmware? Am using
Firmware Version: v1.50.9, Sep. 14, 2006
Which the linksys homepage says is the most recent update for v5.1
Am all out of ideas, I have variously thought it was interferance from my wii or my ps3, or even from a windows program like skype.
Virgin are giving away routers if I upgrade my connection, if this is the likely cause I would consider doing this. after all the router is quite old now and isn't really fulfilling my meda streaming needs (PC >> PS3) either. Or rather - it drops those connections too.
Why haven't linksys given more support to this router, no firmware upgrade for 30 months is shocking IMO
Thanks in advance to anyone who can help
JB

Well Version 5 Firmware will not work with your router, The firmware version which is available on the linksys website is an old firmware, but still you need to re-flash the firmware on your router, as your router is dropping its connectivity and you are facing the problem while downloading. So you need to download the firmware for 5.1 and once you download it and Upgrade the firmware of your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable...Now re-configure your router..

Wrt54g ver5, unable to access the config pages

wrt54g ver5
firmware ver 1.02.5
i am unable to access the internal web pages on wrt54g ver 5
can access the internet fine. it seems to be a memory corruption problem
i has been doing more and more times

Since the router works, it is doubtful (but still possible) that the firmware is corrupted. More likely there is another explanation for your problem. Here are my tips for viewing your router's web pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. It should work.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.

WRT54G configuration for internet access using Lacie Network Space Max

Please HELP!!!!
I have tried for the past 2 weeks trying to configure my router WRT54G so it allows me to access the Lacie over the internet without luck. I have followed every instructions from Lacie and every other FAQs and help on the internet, still no luck. I have spent numerous days with Lacie tech support and they could not figure it out - why my router would not allow me access over the internet. I am hoping that the big guns here can help me.
I have a number of laptops connected wirelessly to my local network and every laptop can access the Lacie NAS hardwired to one of the ports on my router. My entire system works wonderful locally.
The Lacie has been assigned a static IP of 192.168.1.199
My local network has a starting IP of 192.168.1.150 and ends at 192.168.1.199
My router's IP is 192.168.1.99
I have assigned port forwarding for my Lacie (192.168.1.199) for ports
20, 21, 25, 80, and 443.
I have tried other setups but no help. Please help!!!
Happy New Year!!!
Solved!
Go to Solution.

Scrooge... thanks!
My NAS has ftp enabled. Access to the network is excellent throughout my local network. Every PC, wirelessly, can access everything on the NAS without any problem. Even when using the web browser using the IP or the dyndns.org assigned to the NAS. (I signed up for a free dynDNS)
The NAS can be accessed throughout the local network using explorer (under the network directory) and also by mapping the drive. The NAS can also be access using the web browser by either through its assigned IP (192.168.1.199) or by using the NAS's dyndns.org web address (web access requires login since it accesses the Network Space Max web page) - both by http and/or by ftp
My problem is accessing it through the internet outside my local network, i.e. from my work place or any other place away from home. The ability to access my data away from home is what I really wanted to be able to do.
"Open the setup page of the router and go to Status tab. Note down the Internet IP address.
Open the Internet browser and in the address bar type http://Internet_IP_address:21 or ftp://Internet_IP_address .
See if that works for ftp server."
Using the router's IP address for both format, http and ftp - I am not getting connected, even in my local network. Using NAS's static IP 192.168.1.199, I am able to access only using the ftp format. http://192.168.1.199:21 does not take me anywhere, but without the :21 takes me to the login page.
Again, thanks for all your help.... I am lost and I need your HELP!
v/r,
abelts

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Can no longer connect to a Microsoft Outlook Web Access site

Hi,
I hope you can help.
I used to be able to access a Microsoft Outlook Web Access site. However recently I am unable to do so. It has a self signed certificate, which I used to choose to accept, and then the browser waits and waits and waits.
I have tried Safari, Firefox, Camino, Flock, Opera, even Internet Explorer. They all behave the same way.
I am not sure when it stopped working. I only log on infrequently. So I do not know if it stopped working after a security update or an OS upgrade.
My Mac is up to date with software updates. I have performed the usual things, repaired permissions etc.
The funny thing is I can connect using Netscape Comunicator under Classic. I have also borrowed a friend's MacBook running leopard, and that works too.
I am wondering if a setting somewhere has become corrputed or inadvertently set incorrectly.
Thank you in anticipation.
Ted

Hi Bryan,
Thanks for your input.
Unfortunately I cannot get any of the OS X browsers I have tried to get beyond the accepting the site's certificate. All just stall waiting on the Outlook Web Access site. Safari 3.1, Camino, Flock, Firefox (2.0.0.12 and 3 beta 4), Netscape (7.1 and 9), Microsoft's Internet Explorer (thinking that might be more integrated with its Outlook Web Access package).
I have even deleted the certificates from my Keychain (for Safari) or within the other browsers' preferences.
Last night I even re-applied the 10.4.11 combo updater and then checked for software updates to confirm my system was up to date, but again without success when attempting to reach the Outlook Web Access site.
Thanks anyway.
Ted

External Data Refresh failed - Unable to refresh list data in Excel Web Access WebPart

Hi,
I have created a PivotChart in Excel workbook that fetches data from a SharePoint list using "OData Data Feed". When refreshing the connection in Excel 2013, the updated data is displayed in PivotChart. But when i upload the same to a SharePoint
Library and refresh it through Excel Web Access WebPart, it throws an error.
After configuring PowerPivot for SharePoint, i am getting a "We cannot locate a server to load the Data Model" error.
Note -
SQL Analysis Service(PowerPivot) is in running state.
PowerPivot Server has been under Data Model in Excel Service setting.
The library location is added in trusted zone.
Using secure store didn't fix the issue.
Stack Exception
SSPM: Initialization failed on server : Microsoft.AnalysisServices.ConnectionException: A connection cannot be made. Ensure that the server is running. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively
refused it 127.0.0.1:2383
at System.Net.Sockets.TcpClient..ctor(String hostname, Int32 port)
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo) --- End of inner exception stack trace ---
at Microsoft.AnalysisServices.XmlaClient.GetTcpClient(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenTcpConnection(ConnectionInfo connectionInfo)
at Microsoft.AnalysisServices.XmlaClient.OpenConnection(ConnectionInfo connectionInfo, Boolean& isSessionTokenNeeded)
at Microsoft.AnalysisServices.XmlaClient.Connect(ConnectionInfo connectionInfo, Boolean beginSession)
at Microsoft.AnalysisServices.Server.Connect(String connectionString, String sessionId, ObjectExpansion expansionType)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Connect(Nullable`1 ctx, Boolean schedulePingTaskOnFailure)
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx)
at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken ctx)
Check Server Version (ServerName\POWERPIVOT): Fail (Expected:
=11.0.2800.0, Actual: 11.0.2100.60).
--> Check Deployment Mode (ServerName\POWERPIVOT): Pass.
Monitorable Check Server Configuration (ServerName\POWERPIVOT): Fail (Uninitialized, ConfigurationError, WrongVersion).
SSPM: Initialization failed on server ServerName\POWERPIVOT: Microsoft.AnalysisServices.Streaming.ServerConfigurationException: Server ServerName\POWERPIVOT failed configuration checks (Status = Uninitialized, ConfigurationError, WrongVersion).
at Microsoft.AnalysisServices.Streaming.OnPremise.Server.AssertServerConfiguration(Server amoServer, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Server.Initialize(Guid serviceId, CancellationToken ctx) at Microsoft.AnalysisServices.Streaming.OnPremise.Tasks.InitializationTask.Run(CancellationToken
ctx)
Thanks,
Thomas Mathew

Hi,
For your issue, the possible reason is that the SharePoint environment does not have a PowerPivot for SharePoint server, or the SQL Server Analysis Services (PowerPivot) service is stopped.
Install PowerPivot for SharePoint or move the PowerPivot workbook to a SharePoint environment that has PowerPivot for SharePoint installed.
If the software is installed, verify that the SQL Server Analysis Services (PowerPivot) instance is running. Check Manage services on server in Central Administration. Also check the Services console application in Administrative Tools.
Refer to the following link:
http://msdn.microsoft.com/en-us/library/ff487858.aspx
Besides, here is a similar post, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/2e728b3e-6d3d-497b-b0ce-57f2699710e5/access-was-denied-by-the-external-data-source-the-following-connections-failed-to?forum=sharepointadminprevious
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

How do I add Outlook Web Access to mail accounts on my iPod?

I have Outlook Web Access on my laptop to access my work email. I am trying to set up a mail account on my iPod Touch thru Microsoft Exchange unsuccessully. If I should be choosing "Other" instead of Microsoft Exchange, where do I find the incoming and outgoing mail server Host name and User name? And am I using my password in both spots?
Any help is appreciated...thanks!

- Google for:
setup XX email on iphone
to get the settings.
- Ask your IT department for the settings.

Excel web access web part Refresh

Dear All,
Please let me adress my SharePoint issues to you.
Current situation:
I currently have an excel file stored in one of my sharepoint libraries.
The excel file has two tabs.
The first tab contains data exported from a sharepoint list (with data connection)
The second tab has a customized table based on the first tab.
I created a page and added a Excel Web Access web part. The above mentioned excel file (tab2) is viewed in this web part.
Problem:
Everytime I change something in my sharepoint list, the changes will not be viewed in the web part. The changes will only view when I open the excel file in the library first, and then save it.
Question:
Is there a way I can refresh the data automatically, or manually without having to leave the page of the web part?
If anyone has a solution please let me know, thank you for your help!
Bob

you can configure automatic data refresh. fairly simple. this article is for SQL data source, but the same process applies across the board.
http://technet.microsoft.com/en-us/library/hh525341(v=office.15).aspx
Christopher Webb | MCM: SharePoint 2010 | MCSM: SharePoint Charter | MCT | http://christophermichaelwebb.com

Error installing RD Web Access role service on Windows 2012 R2 server

I'm attempting to install the RD Web Access role service to test a VDI deployment but the installation keeps failing. I get the following error:
Exception of type 'Microsoft.RemoteDesktopService.Common.RDManagementException'
was thrown.
As anyone else come across this error? Any help would be appreciated.
Thank you.
Martin.

This is a Service Manager forum and it looks like you wanted to post in a general Windows Server forum. Try posting this here: http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=winservergen
You should also post more details on the services that you are installing.
- Get on the floor, do that dinosaur

Error. your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.

I have the following inside my SharePoint server 2013 :-
EnterPrise Wiki site collection.
i have both "Excel services Application "& "Visio Graphics Service" running correctly.
The problem i am facing is as follow:-
when a user click on an Excel sheet or Visio document , it will be shown inside the browser without any problem.
but if the user click on "Open in Visio" OR "Open in Excel" links inside the browser, they will get the following errors:-
Sorry, but to open this workbook, your computer must be running a supported version of Microsoft Excel and a browser that supports opening files directly from Office Web Apps.
To open this document, your computer must be running a supported version of Microsoft Visio and a browser that supports opening files directly from Visio Web Access.
I have the following settings inside my PC:-
Office 2010 for Excel, word, power point,etc.
Visio 2013.
i have disabled SharePoint foundation support for office 2013
Can anyone advice on this please?

Hi,
Please try to reset the Internet Explorer settings or open Internet Explorer in In-Private browsing and then check if this issue occurs.
If the issue persists, please try to access SharePoint in another computer with Office 2013 and then check if this issue occurs. Or repair Office and restart your server.
Here is a blog about the same issue for you to take a look at:
http://sharepointexit.blogspot.com/2013/12/sorry-but-to-open-this-workbook.html
Best Regards
Dennis Guo
TechNet Community Support

SharePoint 2013 (Foundation) and Outlook Web Access WebPart (OWAPart)

Hi, I've read most MSDN forum threads relating to this topic, however, I haven't seen my issue anywhere.
We're running SP 2013 foundation, and I want to use the Outlook Web Access web part. I followed the steps outlined here:
http://blogs.msdn.com/b/shawa/archive/2014/06/01/owa-web-part-in-sharepoint-2013.aspx
(Sorry, can't add link since I'm new around here)
To make the WebPart available in the site collection. Which worked.
When I try to actually add the WebPart to a page though, I get an error message stating: "There was an error adding the component to the page" (roughly translated from french).
If I try to see the web part properties from the site settings > Web Parts, I get a SharePoint error page, and the help link yields no information.
Most problems I've seen are with the actual configuration of the WebPart, but I can't even get to that step.

I dont think you can use Outlook web app for foundation. This is not possible because those Web parts use Microsoft.SharePoint.Portal.dll
which is not avaliable and registered on SharePoint Foundation.
Instead of using the OWA web parts, you could also try using the Page Viewer web part and set it to the OWA URLs...
If this helped you resolve your issue, please mark it Answered

BlackBerry Internet Service with Microsoft Outlook Web Access account

I need to switch my 8820 to a new work account. They use Outlook Exchange 2003, but do not support BES. I have access via both regular desktop Outlook and also Outlook Web Access (from a different server). I read the procedure to use BIS in KnowledgeBase KB03133. After entering my email address and password, I get a message that it was successfully set up. But, I get no e-mail messages delivered. When I check the settings, it looks like it is not using the correct server for Web Access. However, I can find no way to manually enter it - I don't get the error message described in Step 5 where I can pick "I will provide the settings." I try to set up via computer but I get a message that my BIS cannot be accessed via HTML and need to set up on my BB.
Any suggestions? Would it work with a newer phone running a newer OS? Do I need to check with AT&T if it supports Outlook Web Access? Thanks in advance.

Hi and Welcome to the Forums!
Lot's of possible variables...here a several other KBs to try:
KB03133How to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
KB18567BlackBerry Internet Service cannot connect to a Microsoft Outlook Web Access account using Microsoft Exchange 2007 or Microsoft Exchange 2010
KB15173Locate the mailbox name for a Microsoft Outlook Web Access 2007 email account
KB04804Error message appears when attempting to integrate a Microsoft Outlook Web Access 2010 account
KB02858Unable to integrate a Microsoft Outlook Web Access email address with a BlackBerry Internet Service account
The trick to getting to the manual settings screen is to provide your valid email address, but an incorrect password...then, it will allow you to manually enter the settings.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Unable to export data from Web Access Data Sheet in Sharepoint to local excel or access file

Greetings and good morning.
I'm going to start off in broad terms with this question because I'm not 100 percent sure what information to provide.
Long story short, we've got a Web Access Data Sheet list hosted in a Sharepoint 2010 environment. It is accessed and used by multiple people throughout the day. It contains several thousand line item entries. I'd call it a large data sheet.
I think the size of the data sheet is casuign some instability in the list. I'd like to be able to export a defined range of data from the list into a local excel or access file. After that, I'd delete the stuff on the Access list to improve performance.
But...when I attempt to use the Sharepoint Action bar to export - Excel locks up/crashes. If I try to export to Access, I get a similar issue.
Any ideas? Could anyone begin by telling me what other information is required?

Hi,
If you would like to export data from Access Web Database in SharePoint 2010, you could go to Design With Access page in Settings. The url in my environment is http://sp/tt/_layouts/accsrv/ModifyApplication.aspx . Then choose the Table and export it to Excel
or Modify it in Access.
Regards,
Rebecca Tu
TechNet Community Support

SSL VPN message "This (client) machine does not have the web access privilege."

Hello!
I am trying to configure the SSL VPN (WebVPN) and I am almost done but when clicking on the URL's I configured in the bookmarks, I get the message "This (client) machine does not have the web access privilege. Please contact your SSLVPN provider for assistance." I looked through the many tutorials and guides in existence and none talks about such error and the fix for it. In fact, if I search the net for this error message I get only one match, in the Cisco website, where is say that "The client computer does not meet the security criteria of having web access functionality through the SSL VPN gateway." and as fix it gave this tip "Check the URL to the gateway or contact the administrator if it persists." So, nothing on the website about what this issue is and how to fix it. I will provide my IOS configuration and hopefully someone will spot the issue. Here it goes:
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname R1
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
enable secret 5 $1$1LLX$u7aTc8XfNqPZhPVGwEF/J0
enable password xxxxxxxx
aaa new-model
aaa authentication login userAuthen local
aaa authentication login sdm_vpn_xauth_ml_1 local
aaa authorization network groupauthor local
aaa session-id common
crypto pki trustpoint TP-self-signed-1279712955
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1279712955
revocation-check none
rsakeypair TP-self-signed-1279712955
crypto pki certificate chain TP-self-signed-1279712955
certificate self-signed 01
3082023A 308201A3 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31323739 37313239 3535301E 170D3130 30333233 31313030
33375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 32373937
31323935 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100A8EF 34E3E792 36660498 9801F934 E8A41865 3599EA35 B073AC91 D7A53AF4
A4390D2F CB3DB2DE 936B28F0 A25F3CE1 6F40FD9E E79096F2 F89620E0 B31A7B34
649BBA22 AE44CB55 9F38BF0C 2F2770CF 8380C167 C17D760C 380E28E4 FF7D6874
9EFC310A 2AA60835 F1AA384F CD1A0173 19C98192 EBFBD531 24CB9203 EA9E7D54
B2C30203 010001A3 62306030 0F060355 1D130101 FF040530 030101FF 300D0603
551D1104 06300482 02523130 1F060355 1D230418 30168014 0D9D62EC DA77EAF3
11ABF64D 933633F9 2BA362DC 301D0603 551D0E04 1604140D 9D62ECDA 77EAF311
ABF64D93 3633F92B A362DC30 0D06092A 864886F7 0D010104 05000381 81006853
48ED4E3E 5721C653 D9A2547C 36E4F0CB A6764B29 9AFFD30A 1B382C8C C6FDAA55
265BCF6C 51023F5D 4AF6E177 C76C4560 57DE5259 40DE4254 E79B3E13 ABD0A78D
7E0B623A 0F2D9C01 E72EF37D 5BAB72FF 65A176A1 E3709758 0229A66B 510F9AA2
495CBB4B 2CD721A7 D6F6EB43 65538BE6 B45550D7 A80A4504 E529D092 73CD
   quit
dot11 syslog
ip source-route
ip dhcp excluded-address 192.168.0.1 192.168.0.10
ip dhcp pool myPOOL
   network 192.168.0.0 255.255.255.0
   default-router 192.168.0.1
   dns-server 87.216.1.65 87.216.1.66
ip cef
ip name-server 87.216.1.65
ip name-server 87.216.1.66
ip ddns update method mydyndnsupdate
HTTP
add http://username:[email protected]/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 0 0 0
no ipv6 cef
multilink bundle-name authenticated
vpdn enable
vpdn-group pppoe
request-dialin
protocol pppoe
username cisco privilege 15 password 0 xxxxxxxx
crypto isakmp policy 3
encr 3des
authentication pre-share
group 2
crypto isakmp fragmentation
crypto isakmp client configuration group vpnclient
key cisco123
domain selfip.net
pool ippool
acl 110
crypto ipsec transform-set myset esp-3des esp-md5-hmac
crypto dynamic-map dynmap 10
set transform-set myset
reverse-route
crypto map clientmap client authentication list userAuthen
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
archive
log config
hidekeys
interface Loopback0
ip address 10.11.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface Loopback2
description SSL VPN Website IP address
ip address 10.10.10.1 255.255.255.0
interface Loopback1
description SSL DHCP Pool Gateway Address
ip address 192.168.250.1 255.255.255.0
interface FastEthernet0
description $ES_LAN$
ip address 192.168.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
interface BRI0
no ip address
encapsulation hdlc
shutdown
interface FastEthernet1
interface FastEthernet2
switchport access vlan 2
interface FastEthernet3
interface FastEthernet4
interface FastEthernet5
interface FastEthernet6
interface FastEthernet7
interface FastEthernet8
interface ATM0
no ip address
no atm ilmi-keepalive
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
bundle-enable
dsl operating-mode auto
interface Vlan1
no ip address
interface Dialer1
ip ddns update hostname myserver.selfip.net
ip ddns update mydyndnsupdate host members.dyndns.org
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip policy route-map VPN-Client
dialer pool 1
ppp chap hostname xxx
ppp chap password 0 xxxx
ppp pap sent-username xxx password 0 xxxx
crypto map clientmap
ip local pool ippool 192.168.50.100 192.168.50.200
ip local pool sslvpnpool 192.168.250.2 192.168.250.100
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer1
ip http server
ip http authentication local
ip http secure-server
ip nat inside source static tcp 192.168.0.2 21 interface Dialer1 790
ip nat inside source static tcp 192.168.0.15 21 interface Dialer1 789
ip nat inside source list 102 interface Dialer1 overload
ip nat inside source static tcp 10.10.10.1 443 interface Dialer1 443
ip nat inside source static tcp 10.10.10.1 80 interface Dialer1 80
access-list 102 deny   ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 102 permit ip 192.168.0.0 0.0.0.255 any
access-list 110 permit ip 192.168.0.0 0.0.0.255 192.168.50.0 0.0.0.255
access-list 144 permit ip 192.168.50.0 0.0.0.255 any
route-map VPN-Client permit 10
match ip address 144
set ip next-hop 10.11.0.2
control-plane
banner motd ^C
================================================================
                UNAUTHORISED ACCESS IS PROHIBITED!!!
=================================================================
^C
line con 0
line aux 0
line vty 0 4
password mypassword
transport input telnet ssh
webvpn gateway MyGateway
ip address 10.10.10.1 port 443
http-redirect port 80
ssl trustpoint TP-self-signed-1279712955
inservice
webvpn install svc flash:/webvpn/svc_1.pkg sequence 1
webvpn install csd flash:/webvpn/sdesktop.pkg
webvpn context SecureMeContext
title "My SSL VPN Service"
secondary-color #C0C0C0
title-color #808080
ssl authenticate verify all
url-list "MyServers"
   heading "My Intranet"
   url-text "Cisco" url-value "http://192.168.0.2"
   url-text "NetGear" url-value "http://192.168.0.3"
login-message "Welcome to My VPN"
policy group MyDefaultPolicy
   url-list "MyServers"
   functions svc-enabled
   svc address-pool "sslvpnpool"
   svc keep-client-installed
default-group-policy MyDefaultPolicy
aaa authentication list userAuthen
gateway MyGateway domain testvpn
max-users 100
csd enable
inservice
end
Thank you!

Hi,
Please check SAP note:
2004579 - You cannot create a FR company from a Package
Thanks & Regards,
Nagarajan

WRT54G V3.0 Web Access

Similar Messages

Maybe you are looking for