WRT54G-V3 Disabling SSID Broadcast/Laptop connectivity

I set up this wrt54g v3 yesterday
everything went well
but when I attempted to disable the ssid broadcast for the network, I completely loose all connectivity on the wireless laptop
here is what I have
wpa-psk/tkip
wireless mac filtering
and my challenge is this "disable broacast" thing because once I do I loose all connectivity on the laptop.
As of 9:00am EST I have the broadcasting on but the network is secured but I really would like to know what element I'm missing here.
Also when I did this able the broadcast the laptop wireless card was flickering but I never quite stayed on for me to use it.
My goal (if I had one) would be do disable the broadcast and still have my laptop have connectivity to the AP.
Thanks in advance and God bless.

Hmmmm... probably a laptop glitch.... can't connect to the network coz it can't see it.
Try upgrading the routers firmware while your at it. It's the most you could do coz everything actually checks out fine.
Message Edited by sharkbyte on 03-06-200701:41 PM

Similar Messages

  • Disabling SSID Broadcast Question

    I'm glad to say that my just installed router (WRT54GS-7) is working great.  I have a question however on Disabling SSID Broadcast.  According to the Linksys instructions, after I checked the disable button, I am required to change my profile.  I am to click on an icon on the bottom right tool bar.  The issue I have is that there is no icon to click on.  If I disable my SSID Broadcast, how do I go about changing my profile?

    If Windows is the primary connection software for your wireless, simply open Start-->Control Panel-->Network Connections
    Right-click the wireless network connection in that list and click Properties, the second tab labeled Wireless Networks will allow you to create a profile for a wireless network.  Profiles appear in the Preferred Networks list.  If this area is greyed out that means you installed 3rd party software to handle your wireless connections.  In which case you will need to open that software and configure the profile from within there.

  • Disabling SSID Broadcast

    I have an Aironet CB21AG 802.11b client adapter installed in an IBM ThinkPad T22 connecting to a Linksys BEFW11S4 802.11b wireless router. One of the security essentials indicated by Linksys is to disable SSID broadcast after all wireless devices have been configured.
    When I do so the link between my laptop and the router is lost. The adapter's user manual indicates that if the SSID is blank on the Available Infrastructure and Ad Hoc Networks page - which it is when SSID broadcast is disabled - you cannot activate the network.
    Is there anyway to ensure the Aironet client adapter is able to communicate w/my wireless router with SSID broadcast disabled?

    Yes, just enter the SSID that your are using on the AP into the wlan config utility you are using on the laptop...
    This way your AP will not accept association requests from any wireless client except those who are configured with the correct SSID.

  • Disabling SSID Broadcast on RE1000

    I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house.  Everything is working great except for one important detail... There is currently no way to disable SSID broadcast on the RE1000 range expander!! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting.  Am I the only one who thinks this is a HUGE PROBLEM???  I am seriously considering returning the RE1000.
    Linksys... PLEASE add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment. Thanks!

    ellenclary wrote:
    It's called Defense in Depth and you need to back up your claim.  Yes tools can find non-broadcast SSIDs, but hiding a WPA2 protected SSID is still useful.Dumbest thing to do is hide your SSID.  Here's why.http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssid-really-more-secure/ http://www.zdnet.com/blog/ou/the-six-dumbest-ways-to-secure-a-wireless-lan/43 Hiding your SSID will make newer devices not connect. 

  • Disabled SSID Broadcast, but it's still broadcasting

    OK, here's a wierd one. I was able to finally disable my SSID broadcast the other day. But I noticed that it is still broadcasting. I rechecked the configurations twice. Any idea why it's still broadcasting even though I set it up to NOT broadcast?

    Did you change your SSID?
    Or using default SSID (linksys)?
    Try...
    - Reset Router
    - Change SSID  > save
    - Check wireless connection
    - Disable SSID broadcasting > save
    - Run 'Site survey' (or 'View available wireless networks' on Win XP)
    Is your NEW SSID still detected?

  • Disable SSID broadcast solve the E4200 continuous flashing problem

    I was quite excited about E4200 I got yesterday. Everything works perfect except front LED light start blinking a few hours later. Don't know why it happens in a sudden and non-stop. 
    After several tries, I found that disabling SSID broadcast for both 2.4 and 5GHz stops the blinking.
    Of course, before doing that, I upgraded firmware to 1.0.02, reset to factory defaults and finally set up E4200 manually rather than using Cisco Connect.  
    Now the LED light is continuously lit.
    I hope this hint could help you to solve the poblem as well.

    I wonder if the 'flasjhing logo' problem (which indicates WPS connection is in process) could be due to using Cisco Connect initially.
    I am thinking of doing a '30-30-30' rest, using the web browser for all the configuration.(I have been doing this ever since ditching Cisco Connect early on).

  • Disabling SSID broadcast sets NAT to strict for XBOX 360, even if wired to WRT160N

    I don't know if this is true with all routers, but with my WRT160N, I found that disabling SSID broadcast causes NAT to go into STRICT mode, and there's no way to get back to OPEN (port forwarding, DMZ, etc, unless you enable it.) Unfortunately I had just upgraded my firmware, which sent me and the Linksys tech down the wrong path. The bummer is that XBOX is wired to my router, so not sure why this would've been affected.  Hopefully this helps, since I've seen several **bleep**!?! threads around this.  I just happened to stumble across this after my NAT opened up when I reset my router to factory settings.  Stepped through the changes I had made from default, and wallah, it was the the stupid disabled SSID broadcasting.
    Message Edited by daveyhatton on 01-26-2010 01:42 PM

    You are wasting more "cycles" if you disable the broadcast because your wireless devices have to actively search your network instead of simply listening to the list of broadcast SSIDs and connect to the correct one.
    If "normal folk" want to crack your network they will quickly give up if they do it manually (assuming you have a strong WPA2 passphrase set on your router). Those few attempts won't cause you problems. Your router and wireless network will far more affected by other wireless networks and interference then some failing connection attempts.
    Of course, I assume here that you have changed the SSID from "linksys" to something unique. If you still use "linksys" you will probably see quite a few failing connection attempts, not intentionally but because some people had their computer configured to connect to "linksys" before and still use it or did not remove it from their list of preferred networks. And if it is still "linksys" hiding the SSID won't make a change here, too...
    They provide the option because that's what people want to see and buy. It does not matter whether it is really useful or not. Marketing says you can "hide" your router and people believe it. If you take the first computer at hand and look for networks the normal way it won't list it. Great, people believe it's "invisible". Sells good. Just like people need firewalls to "stealth" their computers in the internet which neither hides their computer not makes it any more secure...
    As long as marketing does not mention that a simple network sniffer will immediately show the existence of the router and very soon will also reveal the SSID... It wouldn't sell so good anymore...
    Of course, the setting should not affect port forwarding and your "NAT" level. Could be a firmware bug in the WRT160N.
    Message Edited by gv on 01-27-2010 07:40 PM

  • WRT54G V7 and SSID broadcast disable

    have problems connect to the router when ssid broadcast is diablet. I can see the "network", enter the SSID and wep-key, but it will not connect.. If I select to broadcast my SSID I can easily connect to the router.. Strange, anyone who have the same problem ? I also have a wrt54g v1, and this router do not have these problems..With this you can easily connect to the router when ssid broacast is disablet..

    I've used Intel PRO 2200GB ver 9.x and earlier version of 10 (driver + management software) to connect to a hidden SSID wireless network without any problem. I manually created a profile for the hidden network and connect to that profile.
    On an unrelated note, I've enable SSID broadcast after reading a few articles about it being nothing but trouble. Here's one.
    Message Edited by neo27 on 01-23-200709:24 AM

  • How can I disable SSID broadcast with Time Capsule?

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    Thanks.

    I have always disabled the SSID broadcast with other devices. It is a big help with securing the networks. Can this be done with Time Capsule? If yes, please tell me how.
    You can by turning on hidden network.
    Open the airport utility .. click on your TC, and then edit.. go to the wireless TAB. Click on wireless options. Click Create hidden network.
    Let me add in modern world.. it is totally useless. A person can see your hidden network using any standard wireless analysis software. It adds no security at all.. and WPA2 Personal with a decent password 10-20 characters mix of upper and lower case plus numbers is still solid.. add more characters if you are paranoid.. but honestly hiding SSID does nothing.
    http://www.howtogeek.com/howto/28653/debunking-myths-is-hiding-your-wireless-ssi d-really-more-secure/
    If you did not know it is not part of the IEEE wireless standard.. it therefore often leads to problems with clients.
    There are many other reasons given in the article above..

  • Trying to disable ssid broadcast

    im trying to disable the ssid broadcast using the web page but it still keeps announcing itself. Any idea of what is wrong? i have a WRT54G2 v1 router.

    How do you know that it is still announcing itself? 
    Many wireless adapters will continue to list (for several days) a wireless network that was previously found, but is now turned off.  So just because your wireless adapter lists your SSID, does not mean that your router is still broadcasting its SSID.
    To verify this, turn off SSID broadcast, save the settings, then change your SSID, and save the settings again, power down your entire network, wait one minute, then power up your network.  Your new SSID will not show up when you display available networks using your wireless adapter.
    Message Edited by toomanydonuts on 08-17-2009 05:17 AM

  • No SSID Broadcast (or connect) even when SSID broadcast is enabled on my WRT54GL?

    I own a WRT54GL, Firmware is 4.30.12 (the latest).
    I used to be able to connect with the router just fine, 801.11g, WEP security.  Recently wireless connectivity stopped working (wired ports are working just fine, with both internal network and Internet access [external]).  I just got around to trying again tonight...
    It seems that my notebook computer does not *see* the wireless router.  I tried connecting with SSID broadcast off (like I used to)... didn't connect.
    I turn on SSID broadcast and even changed my SSID name on the router, and saved the config... but my notebook's "wireless networks" dialog still does not show my router (but it does show 5 of my neighbor's routers).
    What would make an SSID not show up on my client "wireless network" dialogs, even though I tell the router to broadcast it?
    Has the wireless portion of my WRT54GL simply died?

    Please don't take this as an arguement, but I don't understand the logic of your troubleshooting steps.
    I have no problems with Internet access, and my wired network works perfectly.  So there seems no point in expanding the problem to include my broadband modem, right?  My problem seems pretty well isolated (for now) to my WRT54GL only, since it is the immediate device that my notebook is unable to connect with (or see).
    My firmware is the latest and was updated before I posted (see version # in my original post).  I has already recycled the power.  I didn't try the reset button... will try that next, but am not very hopeful :-(

  • Wrt54g reboots when only vaio laptop connects

    Running the wrt54g with no broadcast ID, MAC filtering, and WPA.It works great for all laptops I have except a sony vaio which does eventually work but only after it causes the router to reboot. This is mainly annoying since when others are connected the reboot can affect them. Once the router reboots [first time], the sony can be reconnected (as long as the router is powered up, it seems to remember something) and the router will not reboot a second or third time. I have done what I can with sony but alas, no joy. Other than this one laptop problem, I experience no others. Also upgraded to firmware 8.2, same problem. any suggestions? newbie22
    Message Edited by newbie22 on 11-25-2007 06:37 PM

    Check if you have static ip assigned on Lenovo computer.
    If yes, then set it on “Obtain an IP automatically” to do so follow this link .
    If it is already on “Obtain an IP automatically” then try to upgrade/re-flash the firmware of the router.
    To do that first download the firmware from here and then follow the below mentioned steps
    Open an Internet Explorer browser page on a computer hard wired to the router...
    In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
    Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
    Wait for few seconds until it shows that "Upgrade is successful"  After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
    Now login to the setup page of the router and check the firmware version of the router it should be updated.

  • Disable SSID broadcast on Aironet 350

    I only have four clients to this access point, which I have hard coded the SSID on to them. I want to keep programs like NetStumbler from knowing the AP is there. I have WEP, TKIP, and MIC installed for security I just figure if you can keep someone from knowing that an AP exists you have won half the battle. Is this possible?
    Thanks,
    Tim

    Turning on broadcast SSID on AP allows AP to send SSID in beacon packets .
    Beacon is like keepalive packets . Clients like XP , searches for any wireless
    network in nearby area to connect to it . So for such clients it is useful to turn
    on broadcast SSID . I guess your dlink also worked on same principle and got connected .
    As SSID is transmitted in every beacon it is consider as security risk and document suggest not to turn on broadcast ssid .
    SSID is NOT for security reason although many people consider ssid as security measure .
    Even you turn off broadcast ssid in beacon packet by turning off ssid on ap ,
    probe request and proble response will always contain the SSID . there is no
    way to hide the ssid .
    You can reduce the coverage area ( or cell ) by reducing the transmitt power .
    This is also one of the security step .
    Nilesh

  • SSID Broadcast in WLC4402 and connecting problem.

    When there are multiple wlans in the preferred networks list and I disable SSID broadcast, Windows XP client would not connect to network even if it`s first in the preferred network list. If I enable broadcast, connecting to network works just fine. Have anyone solved this problem?

    Typically I see that issue with only some wireless cards. Turning off SSID broadcast doesn't really gain you much in the way of securing your network. There is freeware that can find the SSID of your network with the broadcast off.

  • WRT54G - can disable RF carrier?

    Does anyone know for sure if disabling wireless access on the WRT54G router actually shuts down the entire RF section?
    I know that disabling it causes my laptops to think there is no signal available, but I'm curious if the carrier is still there, without any modulation, OR if it's really COMPLETELY shut off with the transmitter powered down.
    I tried the Linksys tech support line, but the answer I received made it clear the representative didn't really know what I was asking.
    Thanks!

    It will not shut down the total wireless connection ... it is just change in the wireless frequency ....
    Also if you disable SSID broadcast then it will disable the wireless connection 100% .......

Maybe you are looking for