WRT54G V3 New Firmware

Hello,
I got my WRT54G sometime ago and I've being updating the firmaware as time passed by. However when I did the latest one (4.21.1) The Router came up, however it is like does not allow any internet traffic to pass throught. I did check everything possible (PPoE is UP). It is like I have a rule that stops everything. DMZ does not solve it. I tried to get my old firmware and seems that I deleted it. So now I'm at square #1 since now I ended up loading the original firmware 3.xx that has a lot of bugs. Any ideas from the forum? Does anybody has the previous firmware that can be pass to me.
Cheers

The 4.21.1 firmware has some sort of problem. I updated three different routers this week and two of them have had the same problem as you described. (waiting for the third one to die too).
What does get it working is doing a factory reset from the web interface. (need to reenter all the configuration info again...)
Not sure if this will actually *solve* the problem or just patch it up for a couple of days.
(in the mean time, I am downloading the previous firmware versions just in case...)

Similar Messages

Wrt54g v6 new firmware problems

I just updated to the new firmware 1.02.2. Ever since this update I have to DHCP release and renew about every 30min. As soon as I do this everything is perfect again for about 30 min. What is the problem and/or what do I have to do to go back to the 1.02 version that was flawless. I've done all the normal stuff like going directly to the cable modem. Everything checks out fine. And this definitely happened since the upgrade it was almost instant.
Thanks, Tony
Message Edited by on 07-29-2007 07:04 PM

wrote:
I reset the router to factory defaults and then reflashed it with the new firmware that i redownloaded. Then reset it up and its still having the same problems. Is there any way to download the 1.02 firmware so i can downgrade.
this problem does not seem to effect the wired connection
Tony
Message Edited by on 07-31-2007 06:24 PM
Message Edited by on 07-31-2007 06:25 PM
You may go to ftp.linksys.com/pub/network you will find older firmware versions there. GoodLuck.

Wrt54g v6 cant download new firmware 1.01.0 released 9/22/06

wrt54g v6 cant download new firmware 1.01.0 or the "version info. for this firmware" released 9/22/06
http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109974...
a window pops up says opening page but doesnt prompt to save. anyone else having this problem? i tried looking on ftp.linksys.com but it looks like, they only update gpl code on there.
Message Edited by georgev on 10-03-200611:13 AM

this should be up on the FTP website
I do know everything, just not all at once. It's a virtual memory problem.

WRT54G v6 problems with new firmware

I performed the mandatory firmware update and soon began having problems such as DNS errors when trying to access web pages and no IP address assigned to secured wireless connections using DHCP. I reinstalled the earlier version and all of my problems vanished.
I tried reinstalling the new firmware several times with the same results each time. I ran with a backup D-Link DI-524 until I came up with the idea of rolling back the firmware.
Has anybody else experienced this??

Hello belbeebala
You should be able to find older versions at the Linksys ftp site below.
Just be sure to get the correct one.
For example, if you have the WRT54G v6, you'll want to be sure you find one that looks something like this:
wrt54gv5_v6_fw_1.00.9_US_code.zip
That version can be found down near the bottom of the link, and is just an example of the 1.00.9 Firmware made specifically for the WRT54G v5 and v6....look very carefully for the one you want/need.
Good luck.
ftp://ftp.linksys.com/pub/network

New Firmware for WRT54G ver6 Posted

Saw new firmware posted on the download page for wrt54g ver6 dated 7/2/07, the new version is 1.02.2 good luck people.

I get "Bandwidth value is out of range 64--10000" when enabling QoS. When I set to Upstream Bandwidth to Manual, the problem goes away. But when I switch back to Auto, I am able to save the settings initially. But when I try again, the problem comes back.
Wonder what's wrong... this is no issue with firmware 1.00.9.

WRT54GS v7.5 firmware

Hi guys this is my first message here, so hi to all readers..
Ok, I'm experiencing some problem with the QoS feature of my router WRT54GS,
(in practice it's not so configurable as I want, but this is my problem ...)
so, I googled a lot but I didn't find no modded (or simply newer than mine) firmware for my v7.5 WRT54GS.
There is someone know if and when a new version will be available?
thank u a lot in advance!
bYe!
Message Edited by sonik_tooth on 12-08-2007 01:41 AM

This is a community forum. People from Linksys rarely, if ever, respond directly in this forum. No one here has any insider info on when new firmware will be released.
If you want, you can contact Linksys directly, by phone or by email. Occasionally they have given out beta versions of new firmware to users.

WRT330N needs new firmware!

I have owned a WRT330N since April 2007, and have noticed several issues with the unit. Some may be specific to my unit, but some are firmware related. What is most troublesome is that I reported the single port forwarding bug to Linksys back in May 2007, and they still have not produced new firmware...
I list these issues not so much for help from this forum, but to share information with those who already own a WRT330N, or are thinking about getting one. These issues still exist with the newest firmware (1.00.3).
Issue #1: Single port forwarding bug. Although the pulldown would indicate that you can specify TCP, UDP, or Both, no matter what setting you configure, it always displays (and saves) the protocol as TCP. I confirmed this by trying to single port forward TeamSpeak and setting it to UDP. Did not work. If I go to Port Range Forwarding, and configure it for a single port and for UDP, TeamSpeak works fine. Thus, all my single port forward rules that need UDP or Both have to be listed under Port Range forwarding.
Issue #2: Over time, I have changed MANY settings on this unit. Most recently, devices attached to the WRT330N would periodically be unable to communicate to the router IP (192.168.1.1 by default). Pinging the IP just timed out. This condition would happen several times an hour, but only for a second or two. Reflashing the firmware seemed to resolve the problem. Note: this was not a firmware upgrade, I was already at 1.00.3; I just reflashed 1.00.3.
Issue #3: Config file bugs. I have noticed that if I change a LOT of settings on the unit, then save the config file, I am unable to load the config file (router claims it is corrupted). This occurred not only on my WRT330N, but also on my WRT54GX as well. However, I did notice that I was able to save, then successfully load, the fully customized config file immediately after reflashing the firmware.
Issue #4: Along with #2, the wireless transmitter seems to stop broadcasting for a minute or two several times a day. I will have a perfect connection for hours, and then bam, no signal. A minute later the signal returns. This issue MAY have disappeared after reflashing.
Linksys is sending me a replacement unit in case this is a hardware problem, for which I am grateful. Unfortunately, this will not resolve #1 or #3, and Linksys' refusal to release new firmware is most troublesome.

Hello,
Just adding my name to the list of folks who believe that this router does need new firmware. I had a WRT54G v2 for serveral years and as of late it had developed the bad tendancy to do something very odd with DNS queries, after a hard reset it would clear up for a while, but eventually would come back. I figured that after several firmware updates over the years I'd just gotten a bad flash.
I picked the WRT330N to replace it primarally just because I wanted a router that had a Gigabit Switch integrated and had prior good luck with LinkSys products. It just seems that the new router doesent have some features that the old one did (i.e. it's a step backwards).
1. If I port forward port 80 to my web server, and then use my external domain name which goes to my external IP, the router doesnt get me there. My WRT54G did this with no difficulty.
2. I could find no option to disallow access to the web configuration from the wireless.
3. The router seems to reboot whenever you change trivial settings. Much more often than the WRT54G.
I dont know if LinkSys product planning looks at this, however I for one would say that I'd be happy with a WRT54G that was just updated with a Gigabit Ethernet Switch and otherwise all the same features as it had previously (including keeping the form factor that stacks on other linksys devices).

Suggestion for a new firmware (nokia 2630 phone)

Hello,
I've bought nokia 2630, and revealed one weakness.
When i use "go to" menu or some other menus i can't use numbers to
move through menu (then i push "5" i go to point #5 and go in; in my old nokia 6021 this worked fine).
So such thing in 2630 works only in main menu, but not in "go to" or "functions" and some others menus.
I've interested in service center about new firmware, but they said that i have the latest version.
So i decided to post here to ask official developers to think about new firmware there this function will work properly.
Thank you :-]

i didn't get any reaction from nokia support...

New Firmware Update for Nokia N95 (RM-159 ) :Decem...

Hello All,
It looks like new firmware update is available for Nokia N95 basic model .
Earlier Version of Firmware was : 30.0.015
Now the latest available Firmware was : 31.0.014
When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
I will wait for 2 more days for official communication from Nokia....

Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
Somebody should shine a light on this FW, or nokia has
done a lot of work for nothing!

Help! E75 new firmware doesn't work!!

I upgraded to 201.12.01 firmaware.
Now I can't make any calls ("call forbidden") and I don't receive any calls.
Also the phone's menu is very buggy: when I choose smth in the menu I get in the wrong page!
I made a hard reset. The phone worked well for 2 hours. But when I finished installing all the software - it broke again the same way ((
What's wrong?? Is there any chance to cancel that new "improving" firmaware?
How can I get that phone work well??
PS. It was the last time I bought Nokia phone. I think Nokia can produce only "simple" phone models, but not a smartphone..
PPS. DO NOT UPGRADE A FIRMWARE IN YOUR PHONE!!!!

yep i gave the same advice to my friends: do not upgrade the phone. at least until the bugs are fixed.
We were promised by a new firmware update coming today, my main problem is with my GPS, it keeps hitting me with no connection,like the phone is totally separated from its GPS receiver, it worked just fine before with the v110 firmware, and Nokia totally removed the satellite status which i found really useful!!!
this firmware is a real screw up for NOKIA i always loved their phones and updates, hope they fix these issues soon, cause i really loved my e75

Officejet Pro 8600 N911g new firmware will not install.

My printer: Officejet Pro 8600 N911g
Current Firmware: CLP1CN1416AR
My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
I turned my printer on/off.
I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
I tried updating via USB.
I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
Is there something wrong as to why this current firmware will not install?
Thanks for any help.

New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update"). Prior to new firmware install, printer has performed flawlessly...no problems. Immediately after printer updated it's firmware automatically I began to have multiple problems.
First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed". Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box. This is getting really OLD!! Simply unacceptable for a business class printer!!
Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!)
None of these problems have occurred prior to the automatic firmware update. I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created. I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update".
HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update. If there are problems, take responsibility for it and make it right. HP knows who it sent out auto updates to. These printer owners should be immediately notified and the situation made right. It is not real assuring to have your front line staff not know why the new firmware is not on the website. I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
I'd really appreciate a response back from someone in HP Customer Service.

New firmware Nokia 6110 Navigator version 6.01 soo...

Hello,
I have found on a few different nokia-related-pages that is a new firmware for nokia 6110 navigator (version 6.01). no information about bugfixes, nokia service centers seem to already have it. more to come.

Ok here comes the first news and bugfix list from 5.11 (and i add 4.22 infos) (i use the numbers from here: /discussions/board/message?board.id=swupdate&message.id=40488&query.id=554906#M40488 )
a nokia service center did update my phone to version 6.01.
firs of all: seems to be a again just a mini-upfate as 5.11 was.
- Nokia 6110 Navigator gets firmware 6.01 (02-09-08)
- Nokia Navigator-Program is still version 8.0.12274 (11422) as it was in 5.11, no updates, no routing towards coordinates as in newer route66mobile8 available.
- New firmware seems to get better satellite-signal (not faster, but better signal and therefore more satellites that are actually used)
- No flash lite 3.0, still 2.0
- Maybe sound quality improved in carkit-mode for the one using the phone, was not yet able to try to talk with another person
- Battery bug fixed (as in 5.11)
now concearning the other bugs:
1- could not yet try that alarm-bug
2- fixed, i hear no sound-crack
3- not fixed, volume +/- still not activated in games
4- i have no dual-sim, can not try this
5- idem
6- not fixed, deleted numbers still in protocol
7- didnt try yet
8- not yet noticed, maybe fixed
9- not yet noticed, maybe fixed
10- could not reproduce the problem
11- not yet noticed, maybe fixed
12- didnt try yet
13- flash lite 3.0 missing
14- didnt try yet
15- fixed
16- not yet noticed, maybe fixed
17- in funkwerdabendorf-carkit with bluetooth soundquality seems to be improved, but didnt yet talk with someone else on phone
18- not fixed
19- fixed
20- maybe improved now
21- didnt try yet
22- didnt try yet
23- not fixed, but might be due to the fact, that pc suite has full access during that time to the memroy, therefore musicplayer not
24- not yet noticed, maybe fixed
25- not fixed, old nokia navigator-oem/route66mobile8
26- fixed
27- no changes
28- didnt try yet
29- didnt notice that
30- no change, still rather slow
31- not yet noticed, maybe fixed
32- not fixed, flash still very greenish/blue
33- no change, button still linked to nokia navigator
34- not yet noticed, but due to the fact that it is the same version as in 5.11 and i have had the problem there too, the problem might still be there
35- didnt try yet
so here we go. you might find out too, what they fixed and what they havent fixed yet.

For when a new firmware for normal N73?

I know there is a new firmware for N73ME, my question is, anybody knows when will be release a new firmware for normal N73, with same improvements like N73ME (or more).
Message Edited by naf1970 on 16-Jan-2008 07:22 PM
Nokia N8 / N9 / Lumia 920 White

29-Feb-2008 06:26 PM
1983 wrote:
I think N73 wont get any more updates... The new line of candy bar nseries is the target now: N82 and N78, and the other N81, N95s and N96,
N73 is almost as old as N80, and n80 isnt getting any new updates. Sorry.
ur wrong
Nokia 5800 XpressMusic (11) [Product ID: 0559416]
V 21.0.025 (date: 02-04-2009)
network: mobily (etihad etisalat)

We are desperately waiting for a new firmware for ...

hello nokia,
we are using one of your most popular mobile the n73- music edition ( product code for my mobile 0564012)
as it is seen over the internet that nokia is rolling out firmware updates for their s60v3 devices like some of the e-series.., i just want to know if nokia will release a firmware for our mobile..??
if not.., its our humble request to release one.., which can provide better performance and stability..
most common complaint is regarding its speed..
for eg while entering to menu the mobile becomes sluggish.. even if the phone memory is empty n no memory card is ther...
i've nokia n8, 5230, e63 at present in my family n i'm a big fan of nokia n iu'll be glad to see your reply soon..., n ofcourse the new firmware.... pplllllssssss do the needful..,
ignore mistakes if any..

The N73 was long since discontinued. There will be no further firmware updates for that model.
If you are unhappy about that you can complain to nokia using the "contact us" link near the top or bottom of this page.

New firmware for Nokia E65?

Hi!
I've heard many who have updated their Nokia E65 to firmware v3.0633.69.00 but my updater still says v2.0633.65.01 . Where do I get the v3?
And my E65 is very very very slow to open menus and messages. Anyone else got this problem? How can I fix this sluggish phone and make it faster? It sometimes take 5-6 seconds to open the menu or an SMS. That's realy bad
Nokia E65
Solved!
Go to Solution.

Hello itmn,
I updated my E65 to v3 at Nokia Care Point (even though it was not available in NSU, they told me they always receive the firmware upgrades first than they are released to the Internet/NSU).
After a couple of weeks using this new firmware, I noticed battery improvements (with 3G switched off), the phone is little to nothing faster, and some minor bugs I was experiencing related to WLAN were corrected.
As to your E65 being slow, I once was experiencing the same with v2 firmware and the only solution I managed to fix it was to reset the phone.
I reseted after a back up, but then decided to restore only contacts and calendar entries, and reinstall all the applications from new/fresh downloads (as I noticed some of them didn't work if they were restored from the back up).
In the end, the phone was faster and more responsive.
I guess you could give it a try.
Cheers

WRT54G V3 New Firmware

Similar Messages

Maybe you are looking for