Wrt54g v3 vs. v5: any difference?

I have two linksys wrt54g routers - I now only need one and so plan to sell one of them. One is V3 the other is V5. Just wondering if there is a difference? Reason is: I am currently using the V3 which has a somewhat more complicated setup to allow for remote access to work, and so if there is no advantage to swapping it out with the V5, I'd rather just leave it alone. Thanks for any help!

The version 5.0 has a slower CPU, less RAM, and a smaller flash memory chip than the version 3.0.
If I were you, I would keep the WRT54G v 3.
For more info on this issue, see Wikipedia.org, and search for WRT54G.

Similar Messages

Any difference setting background MRP run in MDBT and SM37

Hello,
Just wander if there is any differences setting up MRP run in MDBT or in SM37 to run RMMRP000? This is to run MRP at plant level in background.
Thanks,
Lin-Lin

Hi,.
Both MDBT & SM37 are having same program (SAPLBTCH) . MDBT is Foreground job as well as Background job.
SM37 is only for Background job only.
Pls let me know any further clarification.
regards,
Mohan
Message was edited by:
Mohan Ramalingam

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go Connect to Server etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Hi recently my MacBook pro has stopped connecting to our office Synology server automatically. I now have to Go > Connect to Server > etc in order to browse the file server. Clearing key chain and then readding everything hasnt made any difference. HELP

Not sure what other tests they could run for me. I've pretty much run all the tests I can using Drive Genius and Tech Tool Pro 5. Is there anything they use that I don't know about??

Any difference between distinct and aggregate function in sql query cost???

Hi,
I have executed many sql stmts patterns- such as:
a) using a single table
b) using two tables, using simple joins or outer joins
but i have not noticed any difference in sql stmts in cost and in execution plan....
Anyway, my colleague insists on that using aggregate function is less costly compared to
distinct....(something i have not confirmed, that's why i beleive that they are exactly the same...)
For the above reffered 1st sql pattern.. we could for example use
select distinct deptno
from emp
select count(*), deptno
from emp
group by deptno select distinct owner, object_type from all_objects
select count(*), owner, object_type from all_objects
group by owner, object_typeHave you found any difference between the two ever...????
Note: I use Ora DB 10g v2.
Thank you,
Sim

distinct and aggregate function are for different uses and may give same result but if u r using aggregate function to get distinct records, it will be expensive...
ex
select distinct deptno from scott.dept;
Statistics
0 recursive calls
0 db block gets
2 consistent gets
0 physical reads
0 redo size
584 bytes sent via SQL*Net to client
488 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
4 rows processed
select deptno from scott.emp group by deptno;
Statistics
307 recursive calls
0 db block gets
60 consistent gets
6 physical reads
0 redo size
576 bytes sent via SQL*Net to client
488 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
6 sorts (memory)
0 sorts (disk)
3 rows processed
Nimish Garg
Software Developer
*(Oracle & ASP.NET)*
Indiamart Intermesh Limited, Noida
To Get Free Oracle & ASP.NET Code Snippets
Follow: http://nimishgarg.blogspot.com

Photo vs Video editing Monitors. Any difference?

Hey guys, I'm in the market for a new monitor, primarily for stills editing, but I want to make sure it's not just capable of, but GOOD for video editing/grading too (I'm new to it, but definitely plan to do a lot of it).
I'm looking at either an NEC or EIZO Monitor - 27" (Maybe 24"), but I haven't decided which one yet. This is primarily because they are the best screens for stills. If that doesn't hold true for video, please let me know what other brands/models I should look at.
Are there any differences between a good stills and a good video editing screen? What should I be on the lookout for?
I'm guessing response time would be one factor? The monitors I'm looking at seem to be about 6ms, although some are at around 8ms. (But I know there are 2ms monitors out there). Is that a major concern?
Anything else?
Cheers!
Ben

Haha, of course not.The full benefits? Look no further than LG 105" 5K TV
That is one heck of a TV. We are not that far from having the entire wall be a TV screen. It will most likely happen in my lifetime. It will certainly change the way houses are built, I imagine.
I was wondering if there's any use in a 1080p screen on my 5" Nexus 5, or in Retina displays on 15" MBPs.
That is kind of my point. I carry a smartphone with a 1920X1080 screen, and I seriously doubt that I would notice if it was replaced by a 1280X720 screen. After all, I don't hold it up to my eyes. On the other hand, there are times when I feel like doing that when I am watching software tutorials. But my eyes can't focus that close, so what is the point in such a high pixel count screen?
At 15" it might make a difference though.
My current 2560x1600 30-incher that I've been using for 5+ years was a huge step up from 1920x1200 24-inchers, and I expect 4K, even in a smaller form factor, would be a boon to use and work with.
I can see the point in a 2560X1600 for photography, even though I would have trouble justifying the cost. If I continue with photography in a more professional vein, I might have to consider something with a very high resolution. It might be a couple of years or more before I upgrade from my camera that can shoot 5 frames per second for quite a while, to one that shoots 24 frames per second indefinitely. We are really close and those CinemaRAW cameras are pretty exciting.
My question remains. You went from 24" to 30" when you went to the higher pixel count. Would it have been better even on a 24" screen? Perhaps. But how much better? We still need a good bang for our buck. Right? It has to be enough better to make it worth the money. How much better is certainly an individual thing with every user.
So, I imagine that 4K on a 42" or so might make a huge amount of sense, but until these old eyes see 4K on a 28" screen, I won't know if it is right for me.

Is there any difference running W7Pro 64 bit and 32 bit for Adobe Acorbat 9 Pro Extended

My primary system runs Windows 7 Pro 64 bit system. My other system runs a 32 bit system. I would like to buy Adobe Acrobat 9 Pro Extended. Is there any difference with running it on either systems? Or will one version work on both the 64 bit and 32 bit systems.

It would work on both systems, but you no longer can buy Acrobat 9...
Mylenium

Is there any difference of the Downloading speed of Folio if i'm in Enterprise or Professional Editi

Hi Adobe,
I have compared the downloading time between Adobe Multi-Viewer and Zinio App(also hosting digital magazine), I found out that it is so much faster in Zinio.
Are there any difference of the downloading speed if let's say the I'm in Enterprise or in Professional edition?
Thank you for the response!

There is no speed throttling that I’m aware of.
Bob

I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

I want to check the main diffrence in Pop up block enabled and disabled.But,i don't get any difference.Would u please help me to understand the difference using one practical example of website

Here's two popup test sites.
http://www.kephyr.com/popupkillertest/test/index.html
http://www.popuptest.com/

Is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5?

Hello,
Customer has a CUCM 6.1.5 cluster which is getting upgraded to 7.1.5. currently the CUCM CDR is sent to a external system (performix) which generates required reports. I would like to know if there is any difference in the CDR output format of CUCM version 6.1.5 and 7.1.5/ its vital to confirm this prior to upgrade as the performix is managed by a different vendor.
Please advise !
Shahid

You can review the CDR documentation here to find that out, most likely there might be some changes
Maintain and Operate Guides
http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
CDR admin guides have the field definitions.
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

Is there any difference viewer software for reports??

Hi,
Is there any difference viewer software for viewing differences between two oracle reports??
Thanks for ur suggestions!
Madhu

Any version control software, like CVS, allows for line-to-line comparison of different versions of the same file. The problem with reports is that to understand differences you need to save the reports in human readable format that can be REX-file.

JSF datatable - any difference with JSF 1.1 and JSF 1.2

Hi All,
In my project there are lot of Datatables, which retrieve data from the database and display it to the user. For each datatable, the columns are not fixed. I want to create some kind of component that can be reusable.
It is basically a JSF portlet. Now i have to use RAD 6. RAD 6 supports only JSF1.1. I have to migrate this to RAD7 in the near future. Are there any differences between the Datatable in JSF 1.1 and JSF 1.2?
I had this approach in mind.
a) Create the datatable programmatically and put the contents to panelgrid. This way the jsp code will be minimized. Is it a good option.? Are the APIs same in both the versions?
b) Is it possible to create a custom datatable which can take some key as input. Then based on the key the datatable can be populated with as many columns as desired.
Please let me know if there are any other good options.
~Anitha.

Hi guys,
my code goes like this..
for (int j = 0; j < size; j++) {
 UIColumn column = new UIColumn();
 dataTable.getChildren().add(column);
 HtmlOutputText header = new HtmlOutputText();
 header.setValue(periodHeader[j]);
 column.setHeader(header);
 HtmlOutputText output = new HtmlOutputText();
 output.setValue(new Double(periodLiability[j]));
 ValueBinding vb1 = FacesContext.getCurrentInstance()
 .getApplication().createValueBinding(
 ("#{liability.periodLiability["+j+"]}"));
 output.setValueBinding("value", vb1);
 column.getChildren().add(output);
this code gives me the number of headers i need. But, it doesnt render the columns. I have an array of Double (periodLiability) which stores few values of Double type. I want to show thesee values inthe dataTable Column.
Please help me..

JSF Datatable - Any difference with JSF1.1 and JSF 1.2

In my project there are lot of Datatables, which retrieve data from the database and display it to the user. For each datatable, the columns are not fixed. I want to create some kind of component that can be reusable.
It is basically a JSF portlet. Now i have to use RAD 6. RAD 6 supports only JSF1.1. I have to migrate this to RAD7 in the near future. Are there any differences between the Datatable in JSF 1.1 and JSF 1.2?
I had this approach in mind.
a) Create the datatable programmatically and put the contents to panelgrid. This way the jsp code will be minimized. Is it a good option.? Are the APIs same in both the versions?
b) Is it possible to create a custom datatable which can take some key as input. Then based on the key the datatable can be populated with as many columns as desired.
Please let me know if there are any other good options.
~Anitha.

Doublepost. Please don't use the back button to edit a topic, you're going to repost it. Use the edit button. Continue here: [http://forums.sun.com/thread.jspa?threadID=5336694].

Are there any differences?

Are there any differences? on Ipod Video bought in USA and Europe? or are they just the same?
Ive heard that some people have problem with ipods in europe with the pal system when they bought it in USA.
Regards Kim

The only difference I would think there would be between iPods sold here or in Europe is the default option for video out display. So, if you buy your iPod in Europe, and you want to display something from your iPod on a TV in the US, you would just have to change and option. Here is an article that goes over that a bit:
http://docs.info.apple.com/article.html?artnum=300250

Is any difference where i plug DVI cable from 2 port on card?

Hey. I want only ask. Is there any difference where i plug DVI cable to that card? Or not?
Cable:
http://www.morele.net/digitus-kabel-dvi-24-1-dual-link-dl-2m-ak-320101-020-imp-486650/
Choose first or second port? Or this doesnt matter? DVI-I or DVI-D no difference ?

http://nvidia.custhelp.com/app/answers/detail/a_id/221

Wrt54g v3 vs. v5: any difference?

Similar Messages

Maybe you are looking for