WRT54G v4 keeps losing connection to the internet

My WRT54G version 4 keeps losing connection to the internet. I've been on the phone w/ customer service so many times that the last time I think they gave up because after putting me on hold they never got back on the phone! :-)
Anyway one pattern I am seeing is that the router loses connection to the internet within two or three hours after I disconnect from the Cisco VPN and shut down my work PC. Has anyone else seen something like this?
-Frank

I found that Linksys EasyLink Advisor is a needless program that ultimately downgrades your router from a good piece of technology to a problematic pile of junk. So, therefore, try uninstalling Linksys EasyLink Advisor to get your good, solid hardware back. All you need to do to in order to get your router to work is plug it into an outlet, plug your Internet connection into the router, and then connect your router to your computer. It should then work without software (i.e., LELA) complicating it up.
Now, if you feel the need to set up an SSID or security, which I highly suggest, type 192.168.1.1 into your web browser. Leave the user name blank, and type admin as the password. Go to the Wireless tab and type something in as the SSID. It could be anything, just as long as it isn't linksys. Click on the Wireless Security sub-tab. Select WEP as the security mode with a WEP encryption of "64 bits 10 hex digits". Now, in Key 1, you need to type in a 10-digit password of numbers 0-9 and letters A-F (I believe). I suggest you use your phone number since that is very convenient in this instance.
Hopefully what I suggested in the first paragraph resolves your problem. If not, I suppose you could ignore the second paragraph if you feel the need to reinstall LELA. *shudders*
Message Edited by Pineconn on 06-24-2008 01:21 AM

Similar Messages

  • I keep losing connection to the internet

    I've had this problem for a while and I'd hoped that 10.5.1 would have fixed it but it hasn't. I was finally able to get things setup so I could at least access my network wirelessly on my 12"powerbook but now it drops connection to the internet all the time. I'll load a couple pages and then on the 3rd or 4th it hangs....spins forever and never loads the page. I have to turn off airport, turn it back on again and then reload the page. Any ideaS?

    Have you tried adding local DNS servers? This sounds a bit like the problem I had that Erik W solved by having me stop using DHCP for DNS servers and adding my ISP;s local DNS servers manually - do not know if this has been fixed in 10.5.1 or not since I'm back to my house that has wired internet
    Larry Nebel
    Message was edited by: LarryHN
    Message was edited by: LarryHN

  • Acouple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since with Apple

    A couple of days ago I kept losing connectivity with the internet.By resetting either my modem or Airport Extreme I could regain it for 10-30 min. when I would have to repeat the resetting.Since,with Apple & Apple store support & many hours of contact with them the problem keeps recurring

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • I have an iPad 2 connected to airport express so that I can play and change music whilst I am teaching ballet class. Recently, I keep losing connection and the airport express gets quite hot. I have alway used Archos but changed to Apple for reliability!

    I have an ipad 2 with airport express that I use to play and change music whilst teaching ballet class. Recently, I keep losing connection and the airport express appears to be getting quite hot. I did use Archos but changed to Apple for reliabilty! Can anyone help or should I just buy a new airport express.

    I agree that it's probably interference. Only other possibility, since you mentioned it, it overheating. Is the express situated so that it is well ventilated? That is to say, not buried under other equipment and laying on its side? What does the status light do when you lose connection?
    CB

  • WRT54G + MODEM THOMSON ST516v6 - CONNECTION TO THE INTERNET IMPOSSIBLE

    Hello,
    I am able to connect to Internet directly via adsl Thomson ST516v6.
    I tried to setup WRT54G but am unable to connect to the Internet.  The modem is connected to WRT54G via the Internet Port.
    PC is connect to WRT54G via port2.  The LEDs looks ok.  But I cannot go out to Internet.
    any advise how I should proceed ? Should i use PPPoE instead of DHCP?
    Thanks!

    Your "modem" is actually a "modem-router" and it uses the same 192.168.1.x  address space as the WRT54G.  This is likely the root of your problem.
    To fix this problem, disconnect the WRT54G from the Thomson.  Then go into the WRT54G and change the "Local IP address" to 192.168.2.1
    Leave WRT54G set to DHCP.
    Message Edited by toomanydonuts on 01-24-2008 01:02 PM

  • WRT54G v8 can't connect to the internet

    I tried to run the easy setup disk, and when I get to the part where it is testing my internet connection, it says it can't connect and to turn off/turn on my cable modem.
    I have completely powered down the cable modem, the router and my PC.  I ran through the steps again to no avail.
    I can connect to the router.  I can ping the router.  I checked my ipconfig and it looks fine.   I can connect to the internet directly from the cable modem, but not via the router.
    I've run through the help on this site and tried all the steps to troubleshoot, and they all work-- except I can't get online.
    I called my provider-- Comcast to see if they had some MAC address registration-- they don't.
    I am setting this up for my mother, and even came back today with my own personal Linksys-- which I know works, and I can't get that one to work either.
    What do I do now?

    Ok I figured it out.  While I was waiting, I decided to try changing the MAC address to enabled and then copying the address from my PC.  I completely rebooted, and suddenly it worked.
    My question is, How would my 57 year old this-is-my-first-laptop-first-internet-first wireless-router- mother be able to figure that out?  It seems strange that the Easy Install package doesn't address that and just leaves you hanging-- stuck on the "Can't connect to Internet" message. 
    Anyway, good luck to everyone else with WRT54G internet connection problems.

  • AirPort Express losing connection to the internet when part of WDS

    Hi,
    I have an AirPort Extreme Baste Station (802.11n) and an AirPort Express Base Station. I have set the Express to extend the wireless signal via WDS. However, after a while the internet connection seems to drop. My computer still tells me I have full signal, and AirPort utility reports no problems, but there just isn't a connection to the internet! If I turn off the Express and then turn off AirPort on my computer, and turn it back on again, I can access the weak Extreme signal.
    This is very frustrating. I was wondering if anyone had any ideas to what the problem could be?
    Thanks very much.

    I had been experiencing the same problem -- Airport Express extending an Aiport Extreme N base station via WDS constantly dropping the connection, but still showing solid green on the LED. I'm also using the WPA/WPA2 Personal encryption scheme over the whole network, and don't want to use no encryption at all or use WEP (which is pretty much the same as no encryption at all).
    Anyway, I seem to have found a solution that works on my system at least. After I made the change outlined below, my connection has been up and running for 5 days now after losing the connection about once every 3 hours or so before that:
    1. Open the Aiport Utility, click on the AEXN base station, and click Manual Setup.
    2. Click the Advanced icon in the toolbar.
    3. Click the IPv6 tab.
    4. From the IPv6 drop-down menu, select Link-local only.
    5. Click Update.
    The AEXN base station will restart with the new settings. You may also have to unplug the Airport Express WDS remote, and plug it back in after the AEXN base station has restarted.
    You also might want to change the radio channel on both the base station and the Airport Express to use channel 11.

  • Keep loosing connectivity to the Internet

    Since upgrading my iMac from Mavericks to Yosemite, Safari and Chrome loose the ability to connect to the internet. The network connection is fine as I can connect to my NAS drive. I have to reset the Mac to restore connectivity. It appears to be intermittent but happens about once a day at the moment. One option could be to system restore back to Mavericks and put in a clean install of Yosemite but I want to avoid this if possible.

    Power Cycle
    Power off the router. Unplug it from the wall. Wait a while.
    Plug it back to the wall. Power the router on. Wait until all the lights are lit properly. It will take a while.
    Restart the computer.
    Start up in Safe Mode.
    http://support.apple.com/kb/PH14204?viewlocale=en_US
    Safari?
    Empty Caches
    1. Safari > Preference > Advanced
        Checkmark the box for "Show Develop menu in menu bar".
        "Develop" menu will appear in the Safari menu bar.
        Click Develop and select "Empty Caches" from the dropdown.
    2. Quit Safari if open.
        Option click the "Go" menu in the Finder menu bar.
        Select "Library" and then "Caches".
        Look for the folder 'com.apple.Safari"
        Right click "com.apple.Safari" and select "Move to Trash"
        Relaunch Safari.

  • Having trouble with The Walking dead game downloading episodes 2 - 5 keeps saying connection to the internet has been lost.

    ?

    Does Safari or Mail connect?
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Flash Players Crash Due Losing Connection To The Internet Server , Why is that Happening ?

    I have been trying to install these Flash Players ,but at the end of the downloading mode it loses connection to the Internet Server and crashes the install . It is very frustrating and I am giving up . Adobe Reader does the same thing , what is there to do ?  I have Windows 8 , the Internet Explorer and Chrome . Still nothing works at all .  If nothing gets straighten out here with this Flash Player and Adobe Reader by the end of the Holidays then I am going to take my computer and have it cleaned out .  Because I've had it with Flash Players and I am tired of it all .

    Download the Adobe Flash Player FULL offline installer directly by clicking one of the following links.
    Flash Player for ActiveX (Internet Explorer)
    Flash Player Plug-in (All other browsers)
    Download the Adobe Reader FULL offline installer here: http://get.adobe.com/reader/enterprise/
    Those require NO internet connection to install once you've downloaded them.

  • I keep losing connection to the interenet

    Hello
    In my apt I am able to connect to my schools wireless network. But I keep losing the connection, especially if I am trying to download something.
    I usually only have three bars in the airport menu bar icon at most.
    To join the network i have two type in the hidden networks name but then it shows that I am connected on a computer to computer network, is this the problem?
    I was wondering if anyone has any suggestions that could help it to work better.

    Have you tried adding local DNS servers? This sounds a bit like the problem I had that Erik W solved by having me stop using DHCP for DNS servers and adding my ISP;s local DNS servers manually - do not know if this has been fixed in 10.5.1 or not since I'm back to my house that has wired internet
    Larry Nebel
    Message was edited by: LarryHN
    Message was edited by: LarryHN

  • Losing connection with the internet on the ipad

    I am losing my connection with my wifi ipad 2; it goes off and on

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • Keep losing Connection I Phone 4s

    Ive had this problem on and off for a few weeks now ive got signal and my 3G is on my phone keeps losing connection to the internet weather app facebook and the app store it seems to have happened since i updated my phone to 6.1.3 it comes back on if i turn my phone off and back on but this get really annoying the past to nights its lost connection over night just wondering if any one else is having the same problem and know when an update is due its says my software is all up to date??

    HA d you tried the very quick trick that seems to work for some - the cycling of the "Airplane Mode" switch on the settings first page. It DOES reconnect here in Barbados (carrier is LIME ) and will hold for at least a week or more... Suspicion is that the carriers may 'fiddle' with their own networks as the upgrade and modify things.... And some phones are very sensitive to slight changes in protocols.  A reboot often doe s not solve this problem, because the phone will reboot to whatever settings were in use at shutdown, but Airplane Mode on then off forces a refresh....without doing a 'reset network settings' which will cause the dump of stored wifi networks and passwords....     I have had to apply this 'fix' ( with success ) to both my and my wife's iPhones 4s,  using ios 6.1.3 ,  more than once .....     Best of luck with it and please post the result !!

  • Deskjet 3520 keeps losing connection to Mac

    Last night, I installed an HP Deskjet 3520 printer to use with my desktop Mac (which is using OS Yosemite).  I have an etsy shop where I sell prints of my illustrations, so I often have to print out multiple files in a row.  When I installed the driver last night, I was able to wirelessly print the test page, but after that, I could not print wirelessly.  Instead, I used the USB connection, which worked fine.  I printed a round of prints and everything worked fine.
    This morning, I need to do some more printing, and my Mac reported that there was no connection to the printer (even though the printer was connected via USB).  I deleted the printer from my Systems Preferences Printers and re-added it, and I was finally able to do my printing (still not wirelessly).
    Now, tonight, I have tried to do more printing and the Mac reports that there is no connection to the printer, USB or wireless.  I tried deleting from Systems Preferences and re-adding again, but that didn't work this time.  Then, I tried resetting the printing system, uninstalling HP, and re-installing the driver.  Now, I'm at the part of the installer where the device needs to be configured and I am receiving the message:
    Device Not Reachable.  The wireless network settings were successfully downloaded to your device.  However, your Mac was unable to locate the device on the network.
    I don't know what keeps going wrong!  The little screen on my printer says it is connected to my wireless network AND I am still connected via USB so I don't know how the device would not be reachable.  I also don't know why the printer would keep losing connection with the computer every time I need to start printing again.  Please help!!

    Hi @tylertot 
    This is in deed a little strange, but I'd like to help! Some of the steps I am going to offer are steps you have done, but I;d like to perform the following steps in the order presented to see what happens. Please give the following a try;
    Leave the printer on and unplug the power cable, also unplug the USB cable. Restart teh Mac and then plug the printer power cable back in. You can also go ahead and reconnect the USB cable.
    Reset Printing System  - (I know you did this already, thus you know how, but here are the steps for others who may view this thread)
    Click the Apple icon (   ), and then click System Preferences.
    In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan  dialog box opens.
    Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
    Click OK to confirm the reset.
    Type the correct Name and Password.
    Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
    Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
    Repair Disk Permissions  - I don't see that you have tried this yet, and this step might be crucial to resolving the issue.
    On the Dock, click Applications, and then click Utilities.
    Double-click Disk Utility.
    Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
    Click the Repair Disk Permissions button at the bottom of the window.
    Once the repair is complete, restart the computer and add the printer back.
    When you add the printer, please ensure you are using the HP driver. You can add the wireless or the USB, or Both. If you ad both, I suggest adding a name to identify one connection from the other.
    Select Add other Printer or Scanner                                                       
    Select the printer you are adding and next to 'Use' you can the printer driver 
    You can see in the image above where the name section is, if you add both connection types simply add USB to the beginning of one of the names. 
    Adding both printers and naming them to help identify them helps when it comes time to print. When you print something you can choose the printer with the appropriate connection type. For example, you can choose the wireless driver ad if you get an offline message try printing again but choose the USB driver. If the USB one works you will know the issue is related to the Wireless connection, and if it doesn;t then the issue is related tot he operating system.  Really this is just a proactive troubleshooting attempt in case issue arise in the near future. If you only want to add one connection type that is okay too.
    I look forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • When i play certain pogo games i keep losing connection why is that

    i keep losing connection from the interent when i play certain pogo games

    what can i do to fix this

Maybe you are looking for