WRT54G v5 admin screen does not load completely
I have a WRT54G v5 and when I go to the admin screen (http) it does not load completly. It was working the other day. I was in the process of downloading a newer version of the firmware, I am using 1.0.6 and was looking at the 1.0.9. I have it on the computer but have not applied it to the router yet.
I am using IE7 and was able to view the page previously with IE7 but am not able to now. I have rebooted the router (cold start). No difference. I can still get to the internet and the wireless is working also, I just cannot make any changes to the router.
I need help, if someone is willing.
Thanks
Dave
Check if your firewall is on. I was having the same problem and I just shut down Zone Alarm...
Similar Messages
-
AppStore does not load completely
my AppStore does not load completely ipad4 btw.....I tried changing account and Internet connection but still does not work
Hi Jay ,
Try clearing your portal navigation cache , browser cache/cookies and then check .
There is a HTTP Provider cache in visual admin also , try clearing that as well .
Also , did you modify your themes after which this problem occured ?
Regards
Mayank -
Theme does not load completely
Hi
The theme does not get loaded completely into the Portal page when we click on the links to the WebDynpro ABAP ( eg. ECC, BW). Also the portal font gets distorted. And this happens 50 % of the time. We have to log back in and try our luck.
Any ideas why this would happen very often? Please let me know.
Thanks
JayHi Jay ,
Try clearing your portal navigation cache , browser cache/cookies and then check .
There is a HTTP Provider cache in visual admin also , try clearing that as well .
Also , did you modify your themes after which this problem occured ?
Regards
Mayank -
This problem is present since about the release of 4.11 of KDE. Howerver usually 1 reboot is enough, and everything works fine again.
But today i had to restart my system 5x till finally everything is working fine.
The Problem: KDE loads only the network-applet on the systray (kmix and clipper are not visible) and it takes around 10 seconds till i can launch the kickoff-menu. After that i get a warning about my one autostart-programm, which is obviously running, and if i really want to try to run in twice. (Btw, if i choose no, then it is not loaded, which is kind of strange too). I am not able to use the reboot/shutdown option in the kickoff-menu. Dolphin or other apps seems to load fine. Only solution for me so far is to reboot the system.
Here is the output of .xsession-errors
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kbuildsycoca4 running...
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: checking file timestamps
kbuildsycoca4(565) KBuildSycoca::checkTimestamps: timestamps check ok
kbuildsycoca4(565) kdemain: Emitting notifyDatabaseChanged ()
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "kded" ( 564 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
ModemManagerQt "kded" ( 564 ) void ModemManager::ModemManagerPrivate::init() : Error getting device list: "org.freedesktop.DBus.Error.ServiceUnknown" : "The name org.freedesktop.ModemManager was not provided by any .service files"
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.8'
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
kded(564)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.18'
kded(564) PowerDevil::Core::loadProfile: The profile "AC" tried to activate "DimDisplay" a non existent action. This is usually due to an installation problem or to a configuration problem. or simlpy the action is not supported
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GTS 450/PCIe/SSE2
OpenGL version string: 4.3.0 NVIDIA 325.15
OpenGL shading language version string: 4.30 NVIDIA via Cg compiler
Driver: NVIDIA
Driver version: 325.15
GPU class: GF100
OpenGL version: 4.3
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.6
Direct rendering: yes
Requires strict binding: no
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
QDBusObjectPath: invalid path ""
QDBusObjectPath: invalid path ""
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(631)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
========================> 4 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
plasma-desktop(631)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_55: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : "/org/freedesktop/NetworkManager/Settings/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::SettingsPrivate::init() : New Connections list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Active connections:
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/ActiveConnection/0"
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : Device list
NetworkManagerQt "plasma-desktop" ( 631 ) void NetworkManager::NetworkManagerPrivate::init() : "/org/freedesktop/NetworkManager/Devices/0"
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/apps/plasma/plasmoids/org.kde.networkmanagement/contents/ui/main.qml:91:9: QML QDeclarativeListView_QML_127: Bei der Fülloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
plasma-desktop(631)/libakonadi Akonadi::AgentManagerPrivate::createDBusInterface: AgentManager failed to get a valid AgentManager DBus interface. Error is: 1 "org.freedesktop.DBus.Error.NameHasNoOwner" "Could not get owner of name 'org.freedesktop.Akonadi.Control': no such name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
plasma-desktop(631)/libakonadi Akonadi::SessionPrivate::socketError: Socket error occurred: "QLocalSocket::connectToServer: Invalid name"
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl", "/usr/sbin", "/usr/local/sbin", "/usr/local/libexec", "/usr/libexec", "/opt/mysql/libexec", "/opt/local/lib/mysql5/bin", "/opt/mysql/sbin")
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f2
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f2
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f2
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f4
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f4
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f4
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f6
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f6
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f6
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000f8
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000f8
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000f8
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fa
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fa
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fa
X Error: BadValue (integer parameter out of range for operation) 2
Major opcode: 53 (X_CreatePixmap)
Resource id: 0x0
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Major opcode: 14 (X_GetGeometry)
Resource id: 0x1e000fc
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 3 (X_GetWindowAttributes)
Resource id: 0x238f5d8
X Error: BadDrawable (invalid Pixmap or Window parameter) 9
Extension: 139 (RENDER)
Minor opcode: 4 (RenderCreatePicture)
Resource id: 0x1e000fc
X Error: RenderBadPicture (invalid Picture parameter) 143
Extension: 139 (RENDER)
Minor opcode: 8 (RenderComposite)
Resource id: 0x1e000fc
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
plasma-desktop(631) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
N: [pulseaudio] main.c: User-configured server at {1da04571ceeb43369c6b10f2742a25c9}unix:/run/user/1000/pulse/native, which appears to be local. Probing deeper.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
akonadi.collectionattributetable OK
akonadi.collectionmimetyperelation OK
akonadi.collectionpimitemrelation OK
akonadi.collectiontable OK
akonadi.flagtable OK
akonadi.mimetypetable OK
akonadi.parttable OK
akonadi.pimitemflagrelation OK
akonadi.pimitemtable OK
akonadi.resourcetable OK
akonadi.schemaversiontable OK
Nepomuk Query Server not available
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/usr/local/bin", "/usr/local/sbin", "/usr/local/bin", "/usr/bin", "/usr/bin/core_perl")
ksmserver(613): Couldn't start knotify from knotify4.desktop: "Fehler bei der Ausführung von „knotify4.desktop“. Entweder läuft KLauncher nicht mehr, oder die Anwendung kann nicht gestartet werden."
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
search paths: ("/home/tumas/.kde4/lib/kde4/plugins/", "/usr/lib/kde4/plugins/", "/usr/lib/qt4/plugins", "/usr/bin", "/usr/lib/kde4/plugins", "/home/tumas/.kde4/lib/kde4/", "/usr/lib/kde4/")
libpng warning: iCCP: known incorrect sRGB profile
libpng warning: iCCP: known incorrect sRGB profile
New PolkitAgentListener 0x1200220
Adding new listener PolkitQt1::Agent::Listener(0x145d2e0) for 0x1200220
yakuake(666)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
yakuake(666)/konsole Konsole::Session::run: Attempted to re-run an already running session.
krunner(659)/kio (KDirWatch) KDirWatchPrivate::removeEntry: doesn't know "/home/tumas/.kde4/share/apps/kabc"
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Device" does not exist
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/tumas/.qalculate/eurofxref-daily.xml"
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/" : property "Vendor" does not exist
"/" : property "Model" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Device" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "DeviceNumber" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Device" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
akonadi_nepomuk_feeder(711) FeederPluginloader::feederPluginsForMimeType: No feeder for type "text/calendar" found
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/PIONEER_DVD_RW__DVR_109_PIONEER_DVD_RW_DVR_109" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/Samsung_SSD_840_EVO_120GB_S1D5NSAD903637X" : property "Drive" does not exist
"/org/freedesktop/UDisks2/drives/WDC_WD6400AAKS_00H2B0_WD_WMASY6382102" : property "Drive" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d0" : property "Name" does not exist
"/" : property "DeviceNumber" does not exist
"/" : property "Device" does not exist
"/" : property "MediaCompatibility" does not exist
"/" : property "MediaRemovable" does not exist
"/" : property "Removable" does not exist
"/" : property "ConnectionBus" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d1" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d2" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d3" : property "Name" does not exist
"/org/freedesktop/UDisks2/block_devices/dm_2d4" : property "Name" does not exist
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
QPixmap::scaled: Pixmap is a null pixmap
dolphin(802) KSambaSharePrivate::findSmbConf: KSambaShare: Could not find smb.conf!
dolphin(802)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
kwin(623) KWin::GlxBackend::present:
It seems you are using the nvidia driver without triple buffering
You must export __GL_YIELD="USLEEP" to prevent large CPU overhead on synced swaps
Preferably, enable the TripleBuffer Option in the xorg.conf Device
For this reason, the tearing prevention has been disabled.
See https://bugs.kde.org/show_bug.cgi?id=322060
QDBusConnection: session D-Bus connection created before QCoreApplication. Application may misbehave.
kate(814)/kate-filetree KateFileTreePluginView::KateFileTreePluginView: BEGIN: mw: Kate::MainWindow(0x1da8200)
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2146e90,0x0,-1,QObject(0x0) ,"m_root")
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x2147550,0x0,-1,QObject(0x0) ,"Unbenannt")
kate(814)/kate-filetree KateFileTreeModel::documentOpened: before add: ProxyItem(0x2147550,0x0,-1,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: empty item
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" ) to ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::documentOpened: after add: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeProxyModel::KateFileTreeProxyModel: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::setListMode: BEGIN
kate(814)/kate-filetree KateFileTreePluginView::setListMode: treeMode
kate(814)/kate-filetree KateFileTreePluginView::setListMode: END
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: change to unnamed item
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= "Unbenannt"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: "Unbenannt" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "Unbenannt" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: removing ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(-1,-1,0x0,QObject(0x0) ) previous: QModelIndex(0,0,0x2147270,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree ProxyItem::remChild: remove ProxyItem(0x2147550,0x2146e90,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) from ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleEmptyParents: parent ProxyItemDir(0x2146e90,0x0,-1,"m_root", children:0) grandparentProxyItemDir(0x0)
kate(814)/kate-filetree KateFileTreeModel::setupIcon: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::setupIcon: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: inserting ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleInsert: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleInsert: creating a new root
kate(814)/kate-filetree ProxyItem::ProxyItem: ProxyItem(0x25aa840,0x0,-1,QObject(0x0) ,"/home/tumas")
kate(814)/kate-filetree KateFileTreeModel::handleInsert: add ProxyItemDir(0x25aa840,0x0,-1,"/home/tumas", children:0) to m_root
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x25aa840,0x2146e90,0,QObject(0x0) ,"/home/tumas") toProxyItemDir(0x2146e90,0x0,-1,"m_root", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: attempting to merge some existing roots
kate(814)/kate-filetree KateFileTreeModel::handleInsert: adding ProxyItem(0x2147550,0x0,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:0)
kate(814)/kate-filetree ProxyItem::addChild: added ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" ) to ProxyItemDir(0x25aa840,0x2146e90,0,"/home/tumas", children:1)
kate(814)/kate-filetree KateFileTreeModel::handleInsert: END!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: current: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) ) previous: QModelIndex(-1,-1,0x0,QObject(0x0) )
kate(814)/kate-filetree KateFileTree::slotCurrentChanged: got doc, setting prev: QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: ".xsession-errors" -> "/home/tumas/.xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing brush ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: removing/replacing view history ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::handleNameChange: bogus name change
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreeModel::documentNameChanged: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: BEGIN!
kate(814)/kate-filetree KateFileTreeProxyModel::docIndex: !
kate(814)/kate-filetree KateFileTreeModel::docIndex: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::docIndex: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: selected doc= KateDocument(0x1fd9630) QModelIndex(0,0,0x2596910,KateFileTreeProxyModel(0x1a75410) )
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: display= ".xsession-errors"
kate(814)/kate-filetree KateFileTreeModel::documentActivated: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: adding viewHistory ProxyItem(0x2147550,0x25aa840,0,KateDocument(0x1fd9630) , "/home/tumas/.xsession-errors" )
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: BEGIN!
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: m_editHistory contains 0 elements
kate(814)/kate-filetree KateFileTreeModel::updateBackgrounds: END!
kate(814)/kate-filetree KateFileTreeModel::documentActivated: END!
kate(814)/kate-filetree KateFileTreePluginView::viewChanged: END!
kate(814)/kate-filetree KateFileTreePluginSettings::save: save config!
dolphin(802)/kdecore (KLibrary) findLibraryInternal: plugins should not have a 'lib' prefix: "libkonsolepart.so"
dolphin(802)/konsole Konsole::Session::run: Attempted to re-run an already running session.
PS: The system is only 2 days old and there were no strange updates or any unusual settings/apps installed.
Last edited by tumas (2013-10-27 07:42:44)Thaodan wrote:Can you write /var/tmp/kdecache-$USER?
What exactly do u mean? There are a few folders/files inside. -
Wrt54g v8 web interface does not load properly
Hi,
There is a similar thread concerning the v6 web interface, where the background loads, but no text and no links. I also see some data in my case, using a v8 router.
I do not want to start with a firmware upgrade since I am not sure which version I have, since the interface does not work. The v6 problem seemed to be related to Zone Alarm, but I am not using that. I tried shutting down my firewall - didn't help.
I am using Vista SP1, tried IE7 and Firefox.
One thing I did notice was that during router config using the supplied tool there was an error about failing to load a language pack. I wonder if there is anything I can do about that. The original plan was to use the web UI to investigate, but as I said, the web UI won't load properly.
ThanksInsert the CD for the router setup .... do not run the Setup ,,,,,
Right click & explorer ... it shows folder for language .... open it ... & choose the sorrect language ... -
When I open Mail, it pretends to open, but:
1) I cannot see the viewer without clicking "New Viewer Window"
2) When I do it allows me to select mail/RSS items, but the viewer just reads "Loading" and never loads
3) It does not retrieve any new mail/RSS messages
4) When I tried to delete the last few messages (in case they caused the problem), they appear to be deleted, but only until I click on another folder they reappear.
5) Trash appears empty, when I don't think it should be.
6) I have to force quit.
I think this might have started when I closed the Macbook cover while it was loading new Mail. Also, this started just yesterday before I upgraded to 10.5.3 today, which I hoped against hope it might help.
I've searched forums the Net over. Help!See:
*[[Images or animations do not show]]
*http://kb.mozillazine.org/Images_or_animations_do_not_load
See also http://kb.mozillazine.org/Websites_look_wrong -
Swf does not load completely in browsers
Hello,
It looks like other people are having issues with
uploading/viewing, but I can't seem to find an answer to my
problem. There are pieces missing from my home page. When I go back
to the home page from the other pages (by clicking on "Lindsey
Sonu", the home page is complete. I have checked my site on three
different browsers, at all times of the day and on both a mac and
pc. I can't seem to figure out what is wrong. Please help!
www.lindseysonu.com
Thank you :)So after hrs of searching forums and trying different things,
I still couldnt get my site to load completely until I decided that
maybe it could be a corrupt image that I used. It wasnt that
either, but then I remembered that this started happening after I
added a preloader. So I took the preloader off and now my site
loads correctly! Hallelujah! I'm still confused as to why that was
the problem. Maybe the site doesnt need a preloader b/c of its
small size. Anyway, I hope this helps anyone who comes across this
issue! -
1st gen iPod Touch does not load completely
I just recently bought a 4th gen iPod Touch to replace my 1st generation one. The new iPod works fine, but the old one will not boot up. When I press the Wake button, it appears to be loading fine for about 30 seconds, but then it just stops. I know battery life isn't the issue because I had it syncing with my laptop for a few hours.
superblah wrote:
... I know battery life isn't the issue because I had it syncing with my laptop for a few hours.
But if this is your old iPod, perhaps it is the battery. It may no longer be able to hold charge, that's what happens to old batteries.
Have you tried turning it on while it's connected to power? When you unplug the iPod from any power and try turning it on, look at the battery icon (if it's there). Is it full when it turns on and what level does it show just before it turns itself off again?
Phil -
When i open my email it does not load completely
when i open smartzone email in mazilla i do not get a complete download. the items ate there but you cannot see them
== This happened ==
Every time Firefox opened
== after it was updatedHi eaglerabbit,
This is a pretty easy fix. Just go to ''Tools > Options > General'' and change the preference for what Firefox should do on startup. You probably have it set to load tabs and pages from your previous session.
If that doesn't work, you should look at the Knowledge Base article [[Preferences are not saved]].
Hopefully this helps! -
farmville loads partially, but not completely. Only get 3/4 of the farm showing. resolution is at smallest setting. Worked great on version 3.6. I WANT 3.6 BACK!!!!!
I'm having the problem with Frontierville. It starts to load, then it disappears.
-
Skype [Latest Update]; Home screen does not load
Hi everyone, my homescreen hasn't been loading recently and I've been trying to figure out why. Whenever I click on the homescreen, the homescreen goes white and it won't load any mood messages. If you know what that is all about, please reply. Thanks.
What do you see when you open this link in your Internet Explorer?
https://apps.skype.com/home/
Be aware that you can use any browser you wish, but Skype is using the installed Internet Explorer engine to create and manage the Home Page. -
E66 - Screen does not turn off, but keeps showing ...
Hi!
My problem is that quite often the screen does not get completely turned off even after long periods of non-usage. The backlight goes off, but the home screen remains visible.
On one hand I'm concerned about the effect of this on battery life, and on the other hand, it's quite annoying that I can't bring up that nice high contrast date&time screen with the press of the navi button, I have to unlock the keys or slide open the phone, which is by no means quick.
The phone's memory content is - apart from a few media files on the memory card - still is in original state.
Any help would be greatly appreciated, thanks,
clay
Solved!
Go to Solution.It's weird, but ever since I posted the question on the boards the problem is gone. :-)
(I actually disabled UMTS about the same time, so this may be the key.)
So for now, problem solved. I'll reopen the topic if the problem comes back. -
JSP / HTML page does not load correctly in IE
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. None of the people in my team were able to solve this issue.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.
In case you need an HTML version of the code, please do mail me at [email protected]Jaison_Sabu wrote:
I have a particular jsp page, which has heavy volume of data and it does not load completely in IE, but loads perfectly in Firefox and Safari.
It is a really perpleximg problem that occurs only when the volume of data is large. Why would you be sending large amounts of data to a JSP? Sounds fishy to me.
None of the people in my team were able to solve this issue.Well if you provided your team with the same amount (none) of information you provided here, then I would understand.
Please send in your suggestions as to why this is happening or if there are any known bugs in IE.Personally, I think it's the flux capacitor.
In case you need an HTML version of the code, please do mail me at [email protected]
Hope you're ready for some spam. -
This does not happen in IE, only FireFox. When Yahoo Mail loads it does not "Load" completely. Icons, Flags, Scrollbars, direction arrows, etc. do NOT load. The functions still exist and work, but if I didn't already know where some of them are located it would be impossible to use them because the "visual icons" do not show up.
See:
*[[Images or animations do not show]]
*http://kb.mozillazine.org/Images_or_animations_do_not_load
See also http://kb.mozillazine.org/Websites_look_wrong -
My app store does not load the featured apps. The screen remains empty everytime I open it.
Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom
Maybe you are looking for
-
Equium M70-337- which hard drive can I fit in this laptop?
Hi, will it just be a 2.5 inch sata? Thanks for any help
-
My ipad will not turn on; just a black screen with the apple symbol on it.
My nephew was on my IPad then I just frozed on him. So he tried to reset it but it only shows a black screen and the apple symbol on the front. The screen has been going off and on, like if it's trying to reset??? Is this a typical problem with th
-
Tones are not working while ringtone works
Phone will ring and alarm clock works. But, any tones associated do not work. Vibrate is how I know I have a text message or email
-
Hello all, I have a requirement to determine the current year in BPS. I made a variable and wrote a function module. The code I have is: DATA: DATE LIKE SY-DATUM, CURRYEAR TYPE C, CHARSEL TYPE UPC_YS_CHARSEL. CLEAR: CHA
-
Hi. I have installed some of the applications, but It seem to not support my Hebrew language. What shell I do ?