WRT54G V5 Cannot Disconnect PPPOE

When press the [Disconnect] button, the web set page hangs! (and internet was NOT disconnected) Is this a bug? I just bought this router (WRT54G V5) few days ago!
And, how come there is no option to Manual connect/disconnect internet!!! The auto-disconnect after xx min idle in "Connect on Demand" is NOT WORKING! Now I need to power off the router each time after use!

hi !
linksys has a new firmware 1.00.9 . try and upgrade the firmware.

Similar Messages

I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users

Dears,
I am using iPhone 4 : i OS 7. When the phone is in sleep mode i cannot disconnect unwanted incoming call, Is there any upgrade coming for this for iPhone 4 users. How this can be sorted

Hello Bibhore,
Calls can be declined by hitting the sleep/wake button twice quickly.
Decline a call and send it directly to voicemail. Do one of the following:
Press the Sleep/Wake button twice quickly.
iPad User Guide - When someone calls
http://help.apple.com/ipad/7/
Cheers,
Allen

How can i connect/disconnect PPPoe via Ethernet connected time capsule??

I connected the time capsule with Ethernet.
I set connect to PPPoe with "Manual" option.
I could easily control "Connect/disconnect" pppoe using AIRPORT (in the menu bar). But I could not find a way to "Connect/disconnect" via ETHERNET. (No ETHERNET icon on menu bar anyway...)
Could somebody help? THanks a lot.

Have you consulted the printer's user manual for setting it up as an Ethernet printer? You will also need to delete your current printer in Print & Fax and when you Add the printer you will need to do so as an Ethernet printer. This means you will add it either as an IP printer using either LPR or IPP protocol - depends on what the printer supports. An Ethernet device requires an IP address that is either manually configured on the device or derived if the device supports DHCP. If the former then the IP address you configure for the printer must be within the range of IP addresses used by your router (typically 10.0.1.2-10.0.1.199 for an AEBS/TC.) This should be covered in the printer's user manual.

Disconnect PPPoE via applescript?

Hi,
I've a Wireless router running on bridged mode connected to my Macbook through airport. I've created a PPPoE dialer to connect/disconnect.
Is there any way I could connect/disconnect it via applescript? I want to schedule reboot (reconnect) at 12am and disconnect at 7am. I used telnet for my previous router, but this one has some unknown firmware.
I'd appreciate any help on this. Many thanks.

Hello
Firstly I have to say I can only guess, for I don't use OSX10.5 for myself.
I found a seemingly relevant page here:
http://blog.heatery.com/2008/06/how-to-connect-or-disconnect-pptp-vpn.html
It contains sample codes to connect and disconnect PPTP VPN session by using application "System Events" under OSX10.5, which I think you can adapt for your need.
E.g.
--connect PPPoE
(* Code from AppleScript 2.0 Release Notes* )
tell application "System Events"
tell network preferences
tell current location
set aPPPoEService to a reference to (first service whose kind is 10)
if exists aPPPoEService then connect aPPPoEService
end tell
end tell
end tell
--disconnect PPPoE
(* A mixture of code from AppleScript 2.0 Release Notes and code from above link *)
tell application "System Events"
tell network preferences
tell current location
set aPPPoEService to a reference to (first service whose kind is 10)
if exists aPPPoEService then
set isConnected to connected of current configuration of aPPPoEService
if isConnected then disconnect aPPPoEService
end if
end tell
end tell
end tell
If you wish, I guess you may replace this line:
set aPPPoEService to a reference to (first service whose kind is 10)
with something like this line, which lets you refer to service by its name:
set aPPPoEService to service "your PPPoE service name"
Hope this may help,
H

Cannot Disconnect 30gb ipod

on my one computer i dont have itunes and dont need it. i use that computer to charge my ipod and sometimes when its "charging" is says very low battery and dies while its plugged in. also i cannot disconnect it because it says ipod cannot be ejected at this time.please help with these issues thanks.

The computer with itunes is at my dads house where all my songs are. the computer at my mom's house where im at most of the time does not have itunes because it is too slow. i use the computer at my moms house to charge my ipod. my computer does recognize it. i have windows.

WRT54G V7 Frequent Disconnections

I've read alot about frequent disconnections using wireless routers but i've tried all sorts of different settings and find it disappointing that the wireless router (WRT54G V7) won't 'keep alive' the connection when it should.
I'm on a WinXP Pro SP2 workstation (AMD + Epox if it matters) on a built-in LAN adapter using Linksys WRT54G V7. Using my DSL directly, Windows automatically redials if I don't have a connection and will keep trying for as many times I have in configured.
When I started using Linksys Wireless router, Windows no longer prompts for login to the DSL (PPPoE) whenever I lose the connection. I don't know why. I Linksys configured to 'keep alive' for 30 secs and I've tried the following with no improvments to my situation:
- enabling/disabling the DHCP Server
- manually entering DNS 1, DNS 2
- MTU is auto
- Tried configuring both Mixed/G-only
- all other options are default to enable my laptop on wireless
Does anyone know what I can do to force Linksys to check if there is a live connection, and redial if there isn't? What's annoying is that I have to restart my workstation to get the connection back. I've tried manually disconnecting through the Linksys admin console but when IE starts returning the message 'page cannot be found' then everything is disconnected.
I've only had the router for less than a month (got it as a present for myself) and I got was disconnections. Again, if I plug the DSL directly, whenever I don't have a connection for some reason, it will automatically redial and I'm connected again. Linksys WRT54G V7 doesn't do that.
Help!

Hi...
Try reseting and reconfiguring the router. Also set it up as keep alive specify the redial period. Change the MTU setting of the router to manual and specify the value as 1300. Also the PPPoE connection on the computer should be disabled when router is dialing.

WRT54G wireless randomly disconnecting

I've never had this problem before but recently I am constantly being disconnected from the net. What's strange is that everything seems to be perfectly normal, it just.. dies.
All the lights on my modem and router are the way they're suppose to be, however nothing works, not even my routers setting page works. The only way to fix this is to turn my computer off, turn my modem off and unplug everything from my router then turn and plug everything back on. However this does not always fix it, but it allows access to my routers setting page.
In my router settings, everything is normal, i go to my status page and disconnect and reconnect manually, however this takes a few attempts and sometimes it gives me the error "Can not find IP address on this PPPoE server".
Does anyone have any idea what's going on here? I've never encountered this problem before nor have I even heard of this kind of problem.
If needed my router is a Wireless-G, Model WRT54G, Ver. 8, Firmware Version: v8.00.2

The same thing happens to me with my cable modem and it is new. I can get as long as 5 hrs or as little as 1 hr before the internet just dies. The modem is still working but I have to switch everything off and then restart my PC just to get back on the internet. Would the fact that my OS is Vista be a problem?
Also, I am fairly basic in terms of my computer literacy, so what it bridging and how can I check and see if this would aid me?
-----Abernyte the computer-noob

Troubles updating ipod, cannot disconnect, songs erased (tried the 5 Rs)

hey guys,
i'm sorry to ask for help with my first post but i've been having some issues with my 2nd gen iPod nano lately. when i connect my iPod to my computer, i get a message in iTunes saying "Songs on the iPod "Han's iPod" cannot be updated because all of the playlists selected for syncing no longer exist". in between the last update i deleted a few playlists, added a few more songs and deleted some songs. i then went to eject my iPod but i get the message "The iPod "Han's iPod" cannot be ejected because it contains files that are in use by another application", when i get this message, the space in iTunes where it displays what you are playing shows "Updating iPod. Do not disconnect.". after trying and failing to find a way to eject it, i just stopped the usb device and unplugged my iPod. then when i tried to use my iPod, i found that everything on it had been wiped and there was nothing on my iPod anymore. so i went to the apple website and tried all five Rs but none of them worked. could someone here please help me with my problem? i'm currently running iTunes 7.0.2 which i believe is the latest version. i'm currently using windows 2000 and it automatically updates every week so i assume i have the latest service pack.
thanks

been away last few days, still need help.
bump bump.
thanks.

Cannot disconnect IPOD b/c files are in use by another program???

All other programs have been closed, but I cannot eject my IPOD. I have no clue what to do. This is the first time I've seen the message. I've only dl one song prior to the message and I deleted it to see if this would resolve the issue...to no avail. Please help

Easy way. Reset the iPod, then disconnect when you see the Apple logo.
Another way. Hold ctr-alt-del to bring up the Windows Task Manager. Go to the Processes tab and look for iTunesHelper.exe and iPodService.exe. Select them and hit the End Process button. Close the Windows Task Manager Window and try ejecting the iPod via the safely remove hardware method.
  If you are still having problems you can try one more thing. Right click on the My Computer icon and select Manage from the list of actions. Go to the Services and Applications item and from there the services item. Double click on the services item to bring up the list of services currently installed on your computer. Look for the iPod Service and double click on it. From the new window select Stop. Now try again to eject using the safely remove hardware option.
  If all else fails shut down the computer and disconnect the iPod.

WRT54G v6.0 Disconnects From Server After Ten Minutes

I posted this once before and somehow it got....deleted?
Anyway....here we go again. I purchased A WRT54G over the holidays. It has worked fine for me with the exception of a real estate data source (server) that I need to use for my business. I can log on and start doing my analysis just fine, but when when the ten minute mark hit....the router disconnects me. It's EXACTLY ten minutes...everytime. I've spent the better part of 20 hours on the phone with Liksys Tech Support and they have been very helpfull, but unable to help me fix this issue. They sent me a new router to replace the one I bought thinking that there was something wrong with that router. After installing the router they sent me....same problem. We opened ports, reduced the MTU to 1375, disabled security, ect... with no luck. Can anyone tell me what I need to do? Any thoughts or advice would be greatly appreciated.

Actually try this...
Connect wired to your ISP provider cable/dsl modem and release/renew dhcp lease...
IP address is then assigned based on MAC address of that computer
IPCONFIG to check assigned address
Re-connect wireless router and in settings duplicate the mac address of the PC used above.
Release/renew dhcp on router and check status on router settings pages
assigned IP should be same or in relative range.
Why this may be occuring.... At least what leads to the above suggestion:
ISP providers in the mid-west region around me started assignment of Router based MAC addressing to monitored and limited bandwidth servers - IP assigned would renew into those servers as the MAC address from a router was a clear indication of mutiple PC use and bandwidth consumption.
Duplication of a desktop or wired network card on your PC into the router defused this by detection your MAC appears to be a single PC and the ISP assigns the address to standard server loads.
Try it see if this helps - keep in mind most of these hardware manufacturers use base hardware from common pools of sub-suppliers - I believe you will have just as much issue with a netgear unit.
Daak

WRT54G V8 randomly disconnects/"powers off"

Well, I'm having an issue here. I got a WRT54G V8 two days ago, so it's brand new. Anyway, I have this problem where the router randomly "powers off". By that, I mean that the power LED (orange light) goes off for a few seconds, then comes back on. The other lights stay on. When this happens, everything will get disconnected from the internet - my computer, my Wii, etc. However, everything go back to normal quickly after. I also had to disconnect/reconnect it once because nothing would be able to connect on the internet anymore, and the Linksys EasyLink software seemed to be convinced that I changed the router. After that happened, I decided to upgrade it to the latest firmware version. While this last problem didn't happen ever since, the power led still goes off randomly and I still get disconnected from the internet. Other than that, everything works like a charm and XP never gives me any network errors or anything of the sort. It's just that this issue is quite annoying when you're gaming and makes me wonder if I bought a defective one...
Any help?
Oh, and in case you need more information... the computer has a wired connection to it, as my PS2, my Wii uses a wireless connection, and so does my DS when I use it. When the power light goes off, everything gets disconnected, wired or not. Also, I'm on a cable internet connection, the modem is a Motorola SURFboard SB5100.
Message Edited by Kelmster on 02-07-2008 12:45 PM

Okay, now I'm getting quite a bit annoyed. The problem keeps coming back randomly. Sometimes, it'll happen once or twice in a day and fixes itself quickly. But other times, like today, I feel like throwing it out of the window. Plus, I've been reading a lot of topics in here, and a lot of people seem to have the same issue as me. The orange light doesn't go off anymore, but the internet connection is being dropped randomly with no warnings, and the internet light does stay on. Power is not flashing, everything seems well when I look at the router. When the internet goes off, I can still access the router. I tried pretty much everything I saw in here, from disconnecting it and the modem for like a half hour to changing the IPs (gave everything on my network a static IP, even tried changing the router's IP), but that only fixes it for a couple of minutes, then bam, the problem comes back. Also did a factory reset, and yes the firmware is updated, but sadly, the problem is still there. It was there from day 1 and it won't go away. I have no idea if it has to do with my Wii accessing the internet wirelessly while it's on WiiConnect24 (it connects randomly to check for updates). It would make sense if it did that everytime, but sometimes I play online on the Wii and the internet connection still works on my wired PC.
Seriously, is there anyone with a clue? I'm seriously thinking of returning it. I bought it to replace a noisy no-name wired router that seemed to like to make me mad. However, the Linksys one is giving me MORE problems! Is this a firmware or hardware issue here? Because I see a lot of people with the same issue, which makes me wonder if exchanging it for another one will actually change anything! I usually figure out problems by myself, but I have to say that this one has me clueless here. And, so far, in many, if not all, the cases where I was clueless about a problem, it was because of faulty hardware/software. The no-name router never dropped connections, and yet I always feared that it would explode in my face. But seriously, this is getting ridiculous. At this point, I actually wish that the problem is something stupid I forgot about, some setting that's hiding from me and that I have to activate/deactivate... I just wonder if exchanging it will fix the problem here.
Is there anyone who actually managed to fix that issue? If so, how did you do it? If you didn't, post here too, we need to make Linksys aware of that issue. Disconnecting the power every half hour or so is not a good solution. I hope it's just a firmware issue that could be fixed soon...

No signal from WRT54G and cannot reconfigure...

Hi,
    I bought my WRT54G
about 6 months ago and it
occassionally lost its setup. That
is, it would forget the network
name and passcode. It has done
that again and, when I use the CD
to set it up again, it repeatedly
asks me for the password. It won't
finish the setup. I also cannot
detect a signal. I tried the web
page (192.168.1.1) but it keeps
asking me for a username and password.
The instructions included with
the unit say that I only need the
password and NOT the username.
   Please help. I'll check this web
site.
                                 Thanks,
                                              GNW

Dear Castor,
     Thanks indeed for your suggestion. I'll keep the reset
button in mind. For some reason, the router has started
working normally again.
Thanks anyway.

WRT54G Router cannot connect to internet

I have Earthlink DSL and am trying to connect to the internet via the WRT54G from my Dell desktop. (Can connect to internet directly through modem just fine.)Have ethernet cable connected to DSL modem and router internet port. Have other cable connected to ethernet desktop port and port1 on router. Setup CD fails on "checking internet connection."
Per tblshooting docs:
Have changed IP to 192.168.2.1
Have changed to PPPOE, with ISP [email protected] and password.
Powered off modem, router, PC. Restarted.
Try to connect to internet--Earthlink dial-up pop-up comes up because there's no DSL connection.
Help.

On top of IE.... go to tools... internet options... then connections... then check the box that says never dial a connection.....
Go back to default 1st on the router. Start from scratch by pressing the reset button of the router for 20-30 seconds , then power down router for 10 seconds and power it back up.
The go back to the router interface (192.1681.1) and leave it as just Obtain IP Automatically or Automatic Configuration DHCP... then go to MAC Address Clone.. enable... clone... save settings... then go to the status page and tell us what is the Internet IP Address value that you see...

WRT54G, v5, Cannot enable MAC address filtering - reverts to disable

I have a WRT54G version 5 with the latest firmware upgrade done several months ago. I recently moved my computer and for some reason the router reset back to factory defaults. I like to enable MAC filtering to ensure only my and my son's PC are on my wireless connection.
When clicking on "enable mac filtering" the browser sends the request to the router, and then on the browser refresh it returns it to "disabled". Likewise I cannot choose any kind of security setting - it is currently disabled and when I choose WPA, WEP or any other security protocol it reverts back.
There are *no* PCs currently in range of my wireless router as I have no yet moved my son's PC in range. Is this the reason why?

I have tried it using both Firefox 2.0 and Internet Explorer 7.0 with the same results...
I am using ZoneLabs freeware software firewall.Message Edited by fprintf on 02-01-200709:05 PM

My iMac intel shows a shared computer that does not exist and I cannot disconnect. How can I remove it?

A computer appears to be shared, but there is no info on it and I cannot connect nor disconnect it. Three of us have tried all the things we could think off without success. It has been going on for months and does slow down some applications that seem to attempt connectionc.
When I reboot I get the following message thre of four times.
There is a problem connecting to the server Isabelle's IMac G5 (10). The server may not exist or it is unavailable at this time. Check the server name or IP address. Check your network connection, and try again.
I have done all that it says, there is no IP address and the network connection seems OK. If I attemp to move the icon representing this server to the Thash, it turns for a short time to an Eject but then it comes back saying that the item cannot be deleted.
Any suggestions?

Hi,
Does this "server" appear in System Preferences > Users > your account > Login Items ?
I have my MacBook Pro listed here as at one time I used it's USB drive for Time Machine on this iMac.
The shot is from a Mavericks computer where the panel is called User and Groups
If the MacBook Pro is not On line when I start up the iMac I get the same message as a pop up.
9:51 pm Tuesday; May 27, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

WRT54G V5 Cannot Disconnect PPPOE

Similar Messages

Maybe you are looking for