WRT54G v5... should I upgrade firmware?
I purchased my WRT54G w.router on September last year. It says it is version 5 and it's firmware version is 1.00.6.
I never upgraded my firmware, never thought it would be important.
Now I am interested on upgrading the firmware and the product page of WRT54G says that the firmware upgrade offered is compatible only for v8 routers... what happened? Should I upgrade with that firmware version?
Supposed you accidentally unlugged the power of the router while in a process of upgrading the firmware, the router might go bad. The powerlight indicator on the router would go flashing and router could not respond anymore with your PC.
**After successfully upgraded the firmware you have to hold the RESET button for 10 seconds and unplug the power of the router and put the power back in.
I am not a teener anymore, I am a woman now - DreamGirls
Similar Messages
-
Should I upgrade firmware to Samsung version NK1 (VZW) or stay with Version's latest NG6 (VZW) is asked by Samsung Kies software check?
Thanks for asking, jrh4054. We always recommend updating your software to the most recent version. At this time, NK1 is the way to go.
http://vz.to/1BkClyB
TamaraH_VZW
Follow us on Twitter @VZWSupport -
New Muvo N200 - Should I upgrade firmwar
Just got a new Gb Muvo N200 and looking at the settings it is version ..0
Should I upgrade the firmware as I believe there is a newer version.
I havent experienced any pops or crackles yet but it is new and I havent listened to more than 5 minutesBognorRocks,
The new firmware listed some fixs and added support for Audible audio. If your not having problem with the player and audible audio support is not needed at your end then it's not needed.
Jason -
How/should I upgrade firmware on a WKPC54G router
I went to the support page http://www.linksysbycisco.com/US/en/support/WKPC54G/download
and I was offered this:Firmware
05/25/2004
Ver. 1.55.02
Download 358 KB
(Firmware)
Firmware Auto Upgrade Utility
Download 44.3 KB
(Firmware Auto Upgrade Utility)
The firmware comes from near the same date as I bought the router.
How can I determine if this is the correct upgrade for my unit?
The Firmware Auto Upgrade Utility seems to be a bad link and doesn't connect.
Can anyone give me some advice about getting updated?
(I want to install a NAS device to an ethernet port on the router and I want to be sure I have the latest firmware to support this.)
ThanksThanks sabretooth:
Firmware Version: 1.55.02, May 21 2004
I was worried that there might be another version and I wasn't locating it.
Thanks a lot -
Should I upgraded to iTunes 7.0 and firmware 1.2 on my iPod?
Should I upgraded to iTunes 7.0 and firmware 1.2 on my iPod because it seems alot of people are having problems especially with the firmware on their iPods.
I am running a Mac and my iPod is experiencing the lock-up that others have reported here.
The update to iTunes 7 as well as to firmware 1.2 for iPod went smoothly and the iPod reboot as part of the firmware upgrade completed successfully. However, I then attempted to eject the iPod and found that the "Do Not Disconnect" screen was frozen on the iPod. I waited for a while but it was frozen - wasn't blinking.
I have reset the iPod numerous times only to find that it freezes shortly after the reset. I have been able to connect it to my MacBook right after a reset and it does seem to sync but I can't eject it successfully - always freezes while connected. Because of this consistent freezing I am unable to attempt a restore on the iPod.
MacBook Mac OS X (10.4.7) 5G iPod 30GB -
I upgraded firmware to the latest(november one). I reseted both router and cable modem and all 3 computer using it.
I've tried something like 100 MTU number, and I still get the same disconnection problems.. seems the power LED is blinking while I get disconnected.
it seems this is a pretty bad router, that gets overwhelmed when you download too much on two or more computer simultaneously.
all my computers are using WIRED connections.
I need help before I terminate this unit with a large wooden club.
really need help, if linksys doesnt want to lose a customer forever.
ps:also -- whats up with the cheap 2mb flash and 8mb ram on this version? earlier version of this unit had 4mb flash and 16mb ram.. im very sad to see you guys downgrading with higher version numbers.. nice marketing!I mean I tried 100 different MTU number from 1500 to 1000, with nothing happening..
I've sent 3 emails to support, they all say they gonna answer within 24 hours and answer to all 3 of them within days.......
( Mod note: Edited for guideline compliance. Thanks! OnnagokorO)Message Edited by Vince_02 on 01-03-2007 10:54 PM -
Upgrade Firmware??
I have a WRT54G router and really haven't upgraded it for a number of years. The router itself is 8 or 9 years old. It is currently running on firmware version 4.20.7. It looks like the router is now on version 8.2. Couple of questions, should I upgrade and secondly can I go from 4.20.7 to the latest and greatest. Many thanks.
Message Edited by Skor on 09-14-2009 07:59 PMAre you facing any problem with your Router ?
What is the version number of the Router ?
Upgarding the router's firmware can resolve many problem releated with routers.So if you are facing any problem with the router...you may try upgrading the router's firmware...Download the firmware from www.linksys.com/download and save it on the dekstop.Now, go to Linksys Setup Page by typing 192.168.1.1 in the address bar...the default password is "admin" .
Under the Linksys Setup Page...Click on subtab firmware upgrade under Administration tab to upgrade the firmware...
Once you upgrade the firmware....reset the router for 30 seconds and reconfigure the router from scratch. -
Ipad wifi does not connect after upgrading firmware to 3.2.2
So many posts and replies on connection to wifi with iPad not working... My issue is that everyhing worked perfect a home until i upgraded firmware to latest (3.2.2?). Now it connects and disconnects in second intervals ??!!
no changes has been made to my router and my two macs connect as before, only iPad does not
Very frustrating indeed, so any tips on what i should do?
Cheers in advancekrannisto wrote:
So many posts and replies on connection to wifi with iPad not working...
You may already have seen these suggestions, but in case you haven't:
_Pad: Troubleshooting Wi-Fi networks and connections_
...from here:
http://www.apple.com/support/ipad/wifi
And every iPad comes with complimentary telephone technical support for 90 days:
http://www.apple.com/support/contact/phone_contacts.html
_iPad Service: Frequently Asked Questions_ -
Is it necessary to be connected to wireless router/access point to upgrade firmware of WRE54G V1.0 in order to support universal repeater mode ??? Please let me know with full details what should I do in order to upgrade the firmware but without stay connected (in range) of a signal of a wireless router ot an access point. Thanks.
neighbour_devil wrote:
Hey mike,
the static IP of 192.168.1.5 has to be assigned to one of the wireless PC's that you have....make sure that you assign the static IP to the "wireless network connection" . once you have done so....check if you are able to see the SSID of the WER54G..connect to that SSID...and then try to ping 192.168.1.240 from the command prompt...if you get replies...then try to upgrade the firmware.
Can someone walk me through the steps of assigning the static IP to the "wireless network connection" referred to in the last post? I would assume you would right click on My Network Places, then right click on the "wireless network connection", but give me the steps after that. I don't want to screw anything up. Also, is it necessary to turn the router off, or can I just temporarily disable the connection on my laptop?
Thanks,
~MaxMessage Edited by maxrich on 08-18-2006 06:30 AM -
Error on trying to upgrade firmware on BEFW11S4-V2 ?
Hi.
I am trying to upgrade the firmware on a BEFW11S4 V2 router. From the Set-up panel, the current firmware is 1.45, dated Feb 28, 2003.
I backed up the config. and downloaded the latest firmware:
"BEFW11S4-V2_v1.45.10_fw.bin" from the Linksys website.
When I go to update the firmware from the router's Set-up .../Help .../Upgrade Firmware,
after selecting the above file, the update starts and goes for about 5-10 seconds and then fails with the messages:
..."Upgrade action is not finish!!
Upgrade file pattern error"
Continue
...which then returns me to the previous Upgrade Firmware page. Have I missed something??
Also...
As background info. (before I forget), I run the router from an XP destop for connection to a DSL ISP and printers connected to the XP machine and for wireless access for a new Win7 Toshiba laptop. Everything seems to work fine so far, but I thought I should get on the latest firmware, eventhough the update would only be a currency update as the release notes don't seem to be an issue from a quick read.I think you should reset the router first.
Connect the computer with the Ethernet cable to the router Ethernet Port.
Download the latest firmware from the Linksys website.
Open the setup page of the router.
Upgrade the firmware using the .bin file which you have downloaded.
Do not take the backup.
After successful upgrade,reset and reconfigure the router settings.
And see if that helps you. -
Wrt54g v6 cant download new firmware 1.01.0 released 9/22/06
wrt54g v6 cant download new firmware 1.01.0 or the "version info. for this firmware" released 9/22/06
http://www.linksys.com/servlet/Satellite?c=L_Download_C2&childpagename=US%2FLayout&cid=1115417109974...
a window pops up says opening page but doesnt prompt to save. anyone else having this problem? i tried looking on ftp.linksys.com but it looks like, they only update gpl code on there.
Message Edited by georgev on 10-03-200611:13 AMthis should be up on the FTP website
I do know everything, just not all at once. It's a virtual memory problem. -
Very slow connection even after upgrading firmware router WRT54G2 v1.5
Hi,
My connection is very very slow, even after upgrading firmware of a router WRT54G2 v1.5. I use a Mac, and Mac OS X 10.5.8.
I have also re-set the router and configured but it didn't work. Any other alternative to speed up my connection? Thanks!!On the setup page,reduce the MTU to 1400,Under the Wireless tab..Wireless Network mode should be mixed...Provide a unique name in the Wireless Network Name (SSID) box.Set the Wireless channel to 11-2.462GHz...Click on Advanced Wireless Settings...Change the Beacon Interval to 75,Fragmentation Threshold to 2304,RTS Threshold to 2304.
Now,reboot the router and check... -
I'm uncertain on whether or not I should update the firmware on my Zen Xtra.
On one hand I don't care anything about online music services. I prefer to rip my own CDs.
And on the other hand I find the MTP support useful.
I am confused on whether the firmware will only allow me to add music from Music Services only. And not my own CD ri
ps.
This would render my Zen useless.
Will I loose any features like EAX?
This firmware upgrade ... may reduce the total number of files that the player can store. The actual results will vary depending on content specifications,
What? How many less files will a 30GB Zen hold? And what are the content spefications?
I just want to know if this upgrade can be useful to someone with no intentions to use online music services and doesn't care to use Windows Media Player to manage thier files.I'd say that if your old firmware is working okay, and you don't need the PlaysForSure compatibility, stick with what you have. Pretty much all it would do is set your Xtra up to work with WMP and online music services (you would still be able to rip CDs as well), and a lot of people on these boards have had huge problems with it. If it's not broke, don't fix it. Always safer to stick with something you know to work well, but I suppose it depends on how badly you want the MTP functionality. Just my $0.02.Message Edited by moonsparrow on -2-2005 06:55 AM
-
HP LaserJet CP1025nw, toggle RFU and upgrade firmware
Hi everyone,
I'm trying to upgrade the firmware of a HP LaserJet CP1025nw printer from version 20100510 to 20150114 through this file provided on the product page. I've downloaded the LJCP1020_FW_Upgrade_Security-20150114.exe and when I try to run it it says that I need RFU enabled othewise install will fail. Then I've looked around to find how to toggle RFU and since the web panel (by typing in the address bar the IP of the printer) didn't contained that option, I ended up at this HP help page which was explaining how to do it.
In particular, since my moel doesn't have a screen, this is the procedure described:
I've tried to press Go and Yellow togheter, I've tried pressing first yellow then Go and viceversa and I tried all of these many times, but I didn't managed to get the step 1 "Ready and Attention leds blinking togheter" and therefore not even the color leds telling me if RFU is enabled or not.
I can't get the shown procedure to work and therefore I can't check and toggle RFU and I don't want to try update the firmware because I fear that if it fails (like the warning says) the printer will break or become unusable because of the incompletely upgraded firmware (I really don't know how the firmware behaves in case of error, I don't want a bricked printer).
So, how to solve this?Gemini02 wrote:
Hi @ANewUser, I see that you are concerned about continuing to run the firmware update on the printer, since the error message to turn off the RFU notification came up. I would like to help you. I have seen this message come up with other models, which also don't have a option for the settings to turn off the RFU and the firmware updated properly. If you are still in warranty and are concerned that it might cause issues with the printer, call into HP tech support and have them walk you through it over the phone. You can call technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html If you aren't having any issues with the printer, then you don't need to run the firmware update. If you appreciate my efforts, please click the Thumbs up button below.
Have a nice day!
Thank You.
Hi, Gemini02 Well I've tried contacting the support about this issue but they said my printer is out of warranty so they would fee me 25€ (about 30$) to assist me because they couldn't solve the problem with the details I provided (which are the same I provided you plus the serial number and the product code and they told me that paid assistance might not be able to solve the problem, so I didn't took the risk.
I'm updating the firmware because of course we have problems on the printer, so I can't skip it.
Anyway, since I can't count on assistance, I could follow your advice and try to update the firmware anyway since you say you've seen models which don't have RFU at all and update succeeded, but in my case, if you check my screenshot, the official hp website has a guide to check RFU for my model (HP LaserJet CP1025nw) through go & yellow button, so I assume that RFU is available on my model and I can't get it to work. I see this problem happened to others ("instructions to check via go & yellow button did not perform as indicated." says the user). But what if firmware update fails?
I'm at work, I can't just try to update and hope the printer will not brick and become unusable. I need to be sure if firmware updater software HP provides is safe in case of failure or not.
I don't want to get to the point that in the middle of firmware installing I get some "Firmware update failed!" and the printer is broken (because there's half of the firmware on it)
That said, how should I proceed? -
Hello,
My MacBook is running super slow. I downloaded Memory Clean from the App Store and I regularly have 15MB or free memory available.
In Activity Monitor I usually see the following:
~800 MB kernel_task
~500 MB softwareupdated
~500 MB Image Capture Extension
In Console, I see mdworker.bundle errors attributed to UID's: 501, 503, 1422
My current UID from what I can tell is 502. Other UID's left over from various upgrades are 89, 99, 235.
Lastly, Drive Genius is giving me a Drive Integrity Warning. But I can't create a bootable clone.
I have no idea if the above problems are related. I'd like to think I just run a lot of stuff that eats my memory and upgrading the RAM would be the easy path. What say you all?
-Jeff
Problem description:
I regularly have 15 MB of Available Memory - Should I upgrade or is there an issue I should solve first?
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 1:42:38 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1920 x 1200
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 11 days 16:29:20
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (73.11 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
/Applications/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.4) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
[not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
[not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
[killed] com.apple.xpc.loginitemregisterd.plist
4 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.ifdreader.plist
[failed] com.apple.loginwindow.LFVTracer.plist
[killed] com.apple.nesessionmanager.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.xpc.smd.plist
8 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
[unknown] ~ [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.akamai.client.plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[running] com.ecamm.printopia.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
[running] com.prosofteng.DGMonitor.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application Hidden (/Applications/Dropbox.app)
Fantastical Application Hidden (/Applications/Fantastical.app)
TextExpander Application Hidden (/Applications/TextExpander.app)
HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
npP3Remote: Version: 0.3 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
1Password
FastestTube
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
Backblaze Backup [Click for support]
BrowserPlus [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Hazel [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Printopia [Click for support]
Xmarks for Safari [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 675.81 GB
Destinations:
Time Machine [Local]
Total size: 999.85 GB
Total number of backups: 49
Oldest backup: 2014-10-30 20:23:53 +0000
Last backup: 2015-02-26 13:07:38 +0000
Size of backup disk: Too small
Backup size 999.85 GB < (Disk used 675.81 GB X 3)
Top Processes by CPU: ℹ️
12% WindowServer
7% bzfilelist
1% loginwindow
1% Dropbox
0% bztransmit
Top Processes by Memory: ℹ️
361 MB bztransmit
326 MB Finder
206 MB Safari
163 MB WindowServer
146 MB Console
Virtual Memory Information: ℹ️
647 MB Free RAM
2.99 GB Active RAM
2.45 GB Inactive RAM
1.67 GB Wired RAM
10.17 TB Page-ins
6.32 GB Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crashOk.
I think that got it all. Anything else you see?
Problem description:
Uninstalled CleanMyMac2
EtreCheck version: 2.1.8 (121)
Report generated February 27, 2015 at 3:31:40 PM EST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (17-inch, Late 2011) (Technical Specifications)
MacBook Pro - model: MacBookPro8,3
1 2.5 GHz Intel Core i7 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1920 x 1200
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 0:51:42
Disk Information: ℹ️
APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 748.93 GB (76.14 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 749.30 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Boom.app
[not loaded] com.globaldelight.driver.BoomDevice (1.1 - SDK 10.9) [Click for support]
/Applications/DiskWarrior.app
[not loaded] com.alsoft.Preview (4.4) [Click for support]
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.hypervisor (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.netbridge (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.usbconnect (9.0 24237.1028877) [Click for support]
[not loaded] com.parallels.kext.vnic (9.0 24237.1028877) [Click for support]
/Applications/VMware Fusion.app
[not loaded] com.vmware.kext.vmci (90.5.7) [Click for support]
[not loaded] com.vmware.kext.vmioplug.12.1.17 (12.1.17) [Click for support]
[not loaded] com.vmware.kext.vmnet (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vmx86 (0188.79.83) [Click for support]
[not loaded] com.vmware.kext.vsockets (90.5.7) [Click for support]
Startup Items: ℹ️
HP IO: Path: /Library/StartupItems/HP IO
Startup items are obsolete in OS X Yosemite
Launch Agents: ℹ️
[running] com.bjango.istatmenusagent.plist [Click for support]
[running] com.bjango.istatmenusnotifications.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.[redacted].UpdatePodcastsAgent.plist [Click for support]
[unknown] ~ [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.backblaze.bzserv.plist [Click for support]
[running] com.bjango.istatmenusdaemon.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.prosofteng.DriveGenius.locum.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.akamai.client.plist [Click for support]
[running] com.akamai.single-user-client.plist [Click for support]
[running] com.backblaze.bzbmenu.plist [Click for support]
[loaded] com.divx.agent.postinstall.plist [Click for support]
[running] com.ecamm.printopia.plist [Click for support]
[running] ws.agile.1PasswordAgent.plist [Click for support]
User Login Items: ℹ️
Dropbox Application Hidden (/Applications/Dropbox.app)
Fantastical Application Hidden (/Applications/Fantastical.app)
TextExpander Application Hidden (/Applications/TextExpander.app)
HazelHelper Application Hidden (/Users/[redacted]/Library/PreferencePanes/Hazel.prefPane/Contents/MacOS/HazelH elper.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Google Earth Web Plug-in: Version: 6.1 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.3.1.3 - SDK 10.8 [Click for support]
OfficeLiveBrowserPlugin: Version: 12.3.6 [Click for support]
npP3Remote: Version: 0.3 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 2.2 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
User internet Plug-ins: ℹ️
BrowserPlus_2.9.8: Version: 2.9.8 [Click for support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0 [Click for support]
WebEx64: Version: 1.0 - SDK 10.5 [Click for support]
Safari Extensions: ℹ️
1Password
FastestTube
DivX Plus Web Player HTML5 <video>
Open in Internet Explorer
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences [Click for support]
Backblaze Backup [Click for support]
BrowserPlus [Click for support]
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Hazel [Click for support]
Logitech Control Center [Click for support]
MacFUSE [Click for support]
Printopia [Click for support]
Xmarks for Safari [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 748.93 GB Disk used: 672.78 GB
Destinations:
Time Machine [Local]
Total size: 999.85 GB
Total number of backups: 49
Oldest backup: 2014-10-30 20:23:53 +0000
Last backup: 2015-02-26 13:07:38 +0000
Size of backup disk: Too small
Backup size 999.85 GB < (Disk used 672.78 GB X 3)
Top Processes by CPU: ℹ️
32% Finder
25% Console
14% WindowServer
4% NotificationCenter
3% hazelworker
Top Processes by Memory: ℹ️
395 MB bztransmit
186 MB Finder
146 MB Console
146 MB WindowServer
129 MB mds_stores
Virtual Memory Information: ℹ️
1.51 GB Free RAM
4.26 GB Active RAM
1.38 GB Inactive RAM
1.44 GB Wired RAM
21.08 GB Page-ins
3 MB Page-outs
Diagnostics Information: ℹ️
Feb 27, 2015, 02:36:10 PM Self test - passed
Feb 27, 2015, 02:13:40 PM /Library/Logs/DiagnosticReports/Memory Clean_2015-02-27-141340_[redacted].cpu_resource.diag [Click for details]
Feb 27, 2015, 01:49:15 PM /Library/Logs/DiagnosticReports/WindowServer_2015-02-27-134915_[redacted].cpu_r esource.diag [Click for details]
Feb 27, 2015, 09:46:13 AM /Users/[redacted]/Library/Logs/DiagnosticReports/helpd_2015-02-27-094613_[redac ted].crash
Maybe you are looking for
-
Updating CS5 Bridge too work with a new camera Canon EOS 70D
Can someone please help me with how I could update my version of Bridge ?
-
Please help me return my skype!!!! Please!!!!
Please help me return my skype!!!! Please!!!!
-
Multi mapping & seeburger Message Tracking (Filestore module)
Hello, For the people who knows seeburger archiving... Anybody make the scenario using multi mapping (split in the receiver) with message Tracking seeburger (File Store module in the Receiver Channel)?
-
Hi freinds, Currently i m working as a SAP ABAP Condultant......from last 6 months..now i m getting a chance to learn....SAP BW,SAP XI,SAP SD................. pls,tell me which one is better for my future...........i m very confuse....... Reg
-
IPhoto library update issues.
Hi all, I recently bought a new iMac and used the time machine backups from my MBP to migrate my programs, files, etc. to the new machine during the setup process. For some reason, the brand new machine was running really slow and the Apple folks had