WRT54G V6.0 Web Based Interface Issue

I'm trying to setup a WRT54G. I ran the SetupWizard which didn't work.
I can access the Web Based Interface at 192.168.1.1 , but when it appears (after putting in the admin password), the page doesn't properly load. The colors and some text comes up, but all of the tabs, buttons and links are missing (including the Save Settings button). I can't get to Administration page to restore the factory defaults or upgrade the firmware.
I've tried the pressing the reset button for 30 seconds about 100 times so far, and nothing has worked. I've tried this on 3 different computers, and my other 2 WRT54G's run properly on all of these computers.
I bought the router about 2 years ago and I just opened the box today.
What fixes are available?
Thanks in advance.
Solved!
Go to Solution.

If you are not able to see any Tab on your router setup page, If you have any Firewall or Antivirus installed on your computer you may disable it and then try to Login to your Router Setup page and check if you are able to see any Tabs on Routers GUI. If still not then Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable.
If you still face the same problem, Connect your other computer to the Router and try to access the router setup page and check if you are able to see any tabs on the router setup page. If stil the same problem on the 2nd computer then you need to Upgrade the firmware of your Router using TFTP tool.
First you need to Download 1.67 MB the Latest Firmware of your router.
TFTP tool which you can Download 44.3 KB (It will be named as BEFW11S4-v2_SetupWizard)
Double click the tftp.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now Check if you are able to Login to your Routers GUI and able to see the Tabs on it.

Similar Messages

Getting SQL*Net more data from client waits when running a query through web based interface

Hi, you all,
We are having this weird behavior when running query through web based interface, we get a lot of "SQL*Net more data from client" waits, the OEM indicates that the current wait event is SQL*Net more data from client
It's just a very simple query wich invokes a db link.
When I execute the same query on any PL/SQL tool like toad or sql developer it works fine, but that query inside an application executed through a web based interface, it hangs for ever.
Where can I start looking for the problem.
We are working on a 3 Node RAC 11gr2, both databases are on the same RAC.
Thanks.

Hi ,
we managed to reproduce the case in test environment, below are the steps:
1)have 2 databases on different machines, will call the first one local, the other one remote.
2)in the local database create:
a - DBLink to remote database.
b - read data from remote database(we simply used select count(*) from dummy_table )
c - insert data into a table on the local database
d - terminate the connection between the 2 databases (disconnect either machine from the network)
e - commit on local database.
what we noticed was the following:
1)when the local database is disconnected from the network(the machine is not connected to any network at the moment): almost immediately throws an error, and issuing the following:
select * from dba_2pc_pending;we found some data .
2) when the remote database was disconnected(the local database is still connected to the network):
after 7-8 seconds an error is thrown, and issuing the following:
select * from dba_2pc_pending;did not return any data.
since this is pretty similar to our case ,we concluded that it's a network issue.
is this the correct behavior ?
as a temporary solution till the network issue is fixed ,we did the following:
1) changed the call of the remote procedure to calling a local procedure that calls the remote procedure.
2) added pragma autonomous_transaction to the local procedure.
3) at the end of the local procedure rollback the autonomous transaction.
it seems that since the global transaction does not use the DBLink database does not issue a 2PC commit.
this works in my cases since the DBLink is only issed to read data.

Java tool (with a web based interface)

Hello all experts,
This is what may client has said:
+"We require a Java tool (with a web based interface) that will+
+screen scrape or copy the Britannica source content from http://www.britannica.com/ by+
+category. Then import those pages into confluence+
+<http://www.matrixian.com/software/confluence/> Britannica . Optimally+
+this tool will work as a plug-in for confluence+
+<http://www.matrixian.com/software/confluence/> Britannica."+
Can anyone please tell me what are the processes (java technology) I should undertake to build the system successfully?
Thanks and Regards,

Find a lawyer.
As it appears, without evidence from you to the contrary that you are asking how to use Java to steal copyrighted content I would humbly suggest that you investigate, whether (a) the activity is illegal (b) whether you feel comfortable legally and ethically in helping someone steal content.
Happily your actual Java related question is quite trivial and the fact that you had to to ask and couldn't either figure it out on your own nor find a suitable answer through searching suggests that you will be unable to provide the client with what they ask based on your current skill set. Aka the legality won't be an issue since you don't appear competent enough anyway.

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA.

How to have a web-based interface for Lumira that also performs Ad-Hoc visualizations on data that should be loaded live from HANA. I have another tool that puts data into HANA, So don't want to reload this new data into Lumira every time I want to run a report.
so do i have the ability to create polished ad hoc dashboards, reports, infographics and storyboards Apart from Ad-Hoc reports, I also need a dashboard with some fixed reports that update with the live data.
So please suggest me to accomplish this task.
Thanks and regards
Shashi kiran

Please have a look at Ludek's document here which contains links: SAP Lumira Family Supported Versions Matrix
Ludek has also attached the PAM's as zipped files; Lumira comes in many flavors so I encourage you to research options
Also see this "HANA Live" document: [SAP HANA Academy] Visualized: Lumira & HANA

Web based VPN issue wheras anyconnect and VPN client working fine

Experts,
We have Cisco ASA 5540 and im running into issues with accessing the webbased VPN(https://X.X.x.x).there are about 8 VPN profiles configured and im unable to login using any of the profiles whereas VPN client and Cisco Any connect are working fine. on accessing web based VPN after providing the login credentials and hit enter the page is getting refreshed and it throws me back to the same login page again. This is the Production ASA and i cannot run debug.
Kindly, provide me your valuable inputs.
Thank you!

Your problem is the NAT-config. First, the following line is not needed as RDP doesn't work ober UDP:
ip nat inside source static udp 192.168.10.136 3389 interface Dialer0 3389
Then, the following command causes the problems:
ip nat inside source static tcp 192.168.10.136 3389 interface Dialer0 3389
With that the router assumes that the server 192.168.10.136 should always be reached through the IP of dialer0 and does a translation.
There are a couple of ways to resolve the problem, but they all have some drawbacks ...
1) Only access the server through VPN. For that you just delete the NAT-statement above (the one with tcp) and you should be able to reach the server through the VPN.
2) Restrict the NAT to don't do a translation if a VPN-peer is accessing the server.
For that you need to attach a route-map to the NAT-statement. But that won't work with the "interface"-keyword in the NAT-Statement. But you can use this if you get a fixed IP from your provider.
3) Assign a second IP to the RDP-server. The original IP which is used in the NAT-statement is used for accessing the server without the VPN, the second IP is used for accessing the server through VPN.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

How to administer an Access database via web-based interface?

There are times when I need to edit a database record to do something my CMS wasn't designed to do, so I have to manually edit it. Normally I just ftp the Access mdb file to my pc, make edits, and reupload the mdb file and hope nobody updated the database in the meantime. Does anyone know of a web-based database admin system that will allow me to edit Access data? Sure would be nice if I could install something on the server that would allow me to edit any datasource there and not have to have a separate, customized interface for each datasource.
Thanks for looking, Bill

I would recommend naming that page with an extension that the web server will not serve. Rename it to use it and then rename it back when done.
Or just put access restrictions on it via the web server, so one needs to authenticate to the system before using it.
Or stop using Access and use a decent DB: Access is not appropriate to be used as a DB for a web application. But that might not be an option.
Adam

Urgent ..How to use Tree component in a web based interface

I want to make a Java web based windows explorer type interface.
For that i want to use tree component .
Is it possible for me to do this.
Can anybody suggest me how to do ?

Hi,
I assume you plan to do this in a browser and you plan to use JTree. When using an applet, you'd have to make sure that the latest Java Plug-In is available on the client.
If you not plan to use JTree, you could use a Tree component which is not based on swing such as the one at http://www.calcom.de/eng/dev/cctree.htm
In this case still the browser would have to be 'Java enabled' by any kind of plug-in
Ulrich

WRT54G Problem in web interface

Hi,
I have Linksys WRT54G Router
When i try to configure my router using web based interface ip address 192.168.1.1
After authentication (providing default pass) home page will be opened. Now when i click on any link in this page. "The page cannot to be display" message will be appear.
I have try to open this page using different computers on my network/ using cross cable
And I also update firmware version using downloading firmware up grading tool available in Linksys web site, but my problem is same.
Now condition is that my router is open access I can’t provide WAP key or MAC Filtering.
Please help me out regarding this matter.
Best Regrads
Tauseef Razzaq
Associate Engineer IT
Punjab Institute of Cradiology, Lahore
[Mod Note: Email address and contact numbers removed.]
Message Edited by OnnagokorO on 12-02-2007 11:37 PM
TAUSEEF RAZZAQ
Associate Engineer
Punjab Institute of Cardiology, Lahore
Phone 9203051 Ext 258 Cell 03214370056

Well, I don't think that the router is upgraded properly. Try this :
1)download the tftp.exe file from ftp.linksys.com/pub/network
2)download the latest firmware from www.linksys.com/download
3)run the tftp.exe file
4)the server is router's ip add , password is router's password , browse the firmware file and click upgrade
5)after the upgrade, reset and reconfigure the router
check whether it makes any difference.

Web Based Access to standarrd Transactions/reports in WAS

We have ECC5.0 in our company . I want to know are all the transactions/reports web enabled in WAS server . The company has a web page that has many BW reports and drill down takes you to the Delivery Screen (SAp)( in IE ) . i need to way to set up a web based Interface for a Report/screen/tcode in WAS ? Is it possible ...they want me to provide them with the address of web page that will open the delivery screen in SAP in IE ?
How can that be done ?
Thanks.

Hi Rich ,
Thanks for the insight . Any Doc/Method of how to use ITS . I havent done it before . Would appreciate of you can give some initial method to proceed ahead ?

SSRS web based report viewer control rendering issues - text getting clipped chopped off

Hi,
I am using web based SSRS report viewer control to display SSRS reports in browsers like Chrome, FF, IE, Safari etc. My issue is some text is getting chopped off (clipped) in all cells of some reports. I investigated on my end by analyzing generated HTML
and I could see a problem in the HTML that report viewer control is generating. But I am afraid to apply any HTML or Javascript hacks at the moment considering we have hundreds of reports.
You can see in above image how text got chopped off. The problem in HTML (given below) is the text has been wrapped in a div tag with a fixed height. If I remove the height and also padding on parent TD, the text appears properly.
<td class="A23dfe7c5f99245f2a0db522a22a6035597c" style="HEIGHT:5.00mm;background-color:#d3d3d3;"><div style="HEIGHT:3.24mm;overflow:hidden;"><table lang="en-US" cellspacing="0"
cellpadding="0" border="0" class="Pd9776e5f7eaf4df696265b8b49d1da39_1_r17"><tbody><tr><td class="A23dfe7c5f99245f2a0db522a22a6035597" style="word-wrap:break-word;white-space:pre-wrap;">MyType11</td></tr></tbody></table></div></td>
Please let me know if you have faced a similar scenario before.
Here is link to stackoverflow thread -
Stackoverflow thread
Regards
Murtaza

Hi Murtaza,
According to your description, when you display the report with Report Viewer control, the data within the text is cutoff.
Based on my research, the issue could cause by that Arial Unicode MS font hasn’t been installed on the server where Reporting Services run. Besides, when we use ReportViewer control to render report, we’d better set
AsyncRendering="true" in the Report Viewer control. Also please run the IE with compatibility mode. For more information, please refer to similar threads below:
Data in column getting cut-off in report viewer control
SSRS Rendering Issues
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Our software vendor tells to use FF 3.5.1. because of some printer issues with their web based program. How safe is it to work with FF 3.5.1 in 2012?

Thanks for the reply. I'll have a look at your solution.

WRT54G V8 Can't connect to web based setup page?

Earlier I reset my router and was able to use 192.168.1.1 to visit the web based setup page while trying to re-establish a home network now that I have a new computer using Windows 7 which can not use the easylink advisor. I was able to get on the page to update my SSID and WEP key. But when my wireless devices were still having problems connecting to the internet I tried to go back to the page and found that I can't get it to connect, though my desktop is able to connect to other internet sites just fine.
Does anyone know what i can be doing wrong? I am using Verizon DSL. I was able to ping the router and all tests showed that it was connected fine, yet I still cannot get on the setup page and my laptop still can't connect to the network. I have tried resetting the router again, and still nothing. And yes, I have gone through numerous power cycles. I also tried going though the network map on my computer, but the computer says it was unable to create a map for it even though at the time I had it listed as a Home network.
Message Edited by TaiShan on 01-03-2010 07:06 PM
Solved!
Go to Solution.

Wireless connections to 192.168.1.1 often fail. When accessing the router setup pages, always use a computer that is wired to the WRT54G.
If the above does not solve your problem, then here are my other tips for viewing the router setup pages:
You do not need an Internet connection. The router's "web pages" are built into the router.
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
Point your browser to 192.168.1.1 , then login to your router. Your user name should be left blank. Your password is "admin" (with no quotes), unless you changed it.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
Some Zone Alarm users have reported that adding 192.168.1.1 to their list of "trusted" addresses fixed the problem. This trick might also work with other firewalls.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker, and the Ad blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Report back with this problem, and also state the make and exact model number of your modem (not the router).
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.
If all of the above tips fail, then reset the router to factory defaults: Power down the router and disconnect all wires from it. Wait one minute. Power up the router, allow it to fully boot (1-2 minutes), then press and hold the reset button for 30 seconds, then release the button and allow the router to reset and reboot ( 2-3 minutes). Power down router. Wait one minute. Connect one computer, by wire, to a LAN port on the router. Boot up system. The router should work, but you will need to setup your router again from scratch. If you saved a router configuration file, DO NOT use it.
If you still have trouble, then you need to download and install (or re-install) the latest firmware for your router. After the firmware upgrade, you must reset the router to factory defaults, then setup the router again from scratch. If you saved a router configuration file, DO NOT use it.
Message Edited by toomanydonuts on 01-03-2010 10:54 PM

Web-based Set up page corrupted WRT54G

I have a WRT54G router. I want to go in and change the password and a few other administrative things plus upgrade firmware. The web-based page is corrupted or something. The fields have very limited text and there are no tabs or html links visible. I tried other addresses but the default seems to be the only one that will even bring up the sereen. Is there another way to upgrade the firm ware and make administrative changes seperately from the web-based page?

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall. If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, also be sure to turn off the Pop-up Blocker.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.

My web-based email downloads aren't working properly. Is this a plugin issue?

Either since upgrading to Firefox 4.0 (and updates) or getting Adobe Reader updates, my download configuration is no longer working properly. For example, when I am downloading (from my web-based email) attachments such as images, word docs, excel docs, this is what happens:
1) I am NOT asked if I want to Save or Open
2) The document opens awkwardly in the correct application, attempts to PRINT immediately, then quickly closes and re-opens in Adobe Reader!
I cancel the printing as quickly as I can, but am baffled. I'm guessing it's a plugin issue, but don't know how to resolve that.
I know it's a Firefox issue, because I tried in Opera and it works normally. Please help, thanks!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

E4200 Web-based User Interface having problems in Google Chrome 8 web browser

Setting up a new E4200. My main web browser is Google Chrome (and Chrome has worked well with all of my other Linksys products, and that's a lot of products .
The problems:
1) The warning message that pops up (when using IE8) about changes in the Web UI breaking Cisco Connect's ability to manage the router does not appear.
2) The "DHCP Reservation" button on 'Setup / Basic Settings' does not pop-up, making it impossible to make changes to the DHCP table in Chrome. Works fine in IE8.
NOTE: The "DCHP Client" button on 'Status / Local Area Network' does work, so it appears that some pop-ups are working but not all.
NOTE: I don't customize my Google Chrome settings with regards to pop-ups and haven't seen this problem with any other site (well, except for some Oracle web applications that are years old, but those don't work in FireFox either and appear to have IE6-specific code).
Platform: Windows 7 Ultimate 64-bit, Google Chrome 8, E4200 firmware 1.0.0
(Mod note: Edited for guideline compliance.)

i use chrome and firefox but 99.8% is used on chrome. i have no issues. i do not use the cisco connect CD. it causes more harm than good. the warning is correct. you can break some things on the web based UI if you use the CD...

WRT54G V6.0 Web Based Interface Issue

Similar Messages

Maybe you are looking for