WRT54G v6 -- PCs' not able to enter encryption key?

Just bought a WRT54G, replacing an older Linksys wireless router (BEF.... something)...
I set up the new router with an encryption key (128-bit key using WEP).
My work PC, which for security reasons has the encryption key already built in, finds the network and works fine.
My home PCs (new HP notebook running XP pro) which do not already have that key set up, detect the network, says it's secured, but when I click on connect, it never prompts me for a network key to enter, just gives an error message saying it can't connect.  Nowhere can I find anywhere to manually bring up properties, etc.
Same problem on a 2-year old Toshiba laptop with XP pro, and an Apple iBook with Mac OS X.
I've connected many times to other wireless networks with encryption keys, this is the first time I've experienced this.
Any help would be appreciated -- is there some router setting I'm missing that will enable this to work?
Thank you.

sharkbyte, even if you do not delete the entry of your preferred wireless network, it should prompt with a network key...
what you can do is to do this
click START
go to RUN
type in services.msc
under the service local window, look for wireless zero configuration, right click on it then click on restart.
then try to connect wirelessly again.. It should prompt you with a network key already
"a helping hand in a community makes the world a universe"

Similar Messages

  • I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

    You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

  • I am not able to enter the password and also can not able to open any application in my Mac Book Pro;to log in I have to force shutdown.

    Hi
    My Mac book pro is behaving strangely. I am not able to enter the Password and can't open any application/folder. To log-in I have to give forced shutdown. When ever I try to open any application the screen turns grey (some times) and the window pop up " --------- quit unexpectedly".
    I updated the OS too from the available updates but the problem persists. I have reasonable amont of data in it, which definitely I do not want to loose.
    Kindly let me know how can I come out of the above scenario?

    Hi Susan,
    In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
    - Abhishek Maurya

  • Navigation very slow and not able to enter in memory a sequence issue

    Hello,
    we have a big problem with oracle forms performance since we deployed our
    application to the web. all our customers are not confortable with this new
    environment because the sytem are very slow and working it's very difficult.
    our application is very slow in point of when the user use very quickly the key
    functions it doens't work.
    I explain :
    for example, we have a button &Verifier (alt+v : acces key to this button) and
    when clicking to button we have a dialox box that contains 2 buttons:
    Oui(alt+O:access key) and Non(alt+N:access key) and if we click Oui(alt+O) it
    popup as an information box and we must click Ok(alt+O: access key).
    then if we click quickly alt+v after alt+o after alt+o it doens't work and it
    wait to click againt alt+o.(like the system doesn't follow or has not yet enter all the sequence in the memory)
    before in client/server it work's fine.
    it's like our application in the web it's not able to entered in memory a
    serial of access key.
    please can you help me the problem is always occuring in the production
    environment.
    our environment:
    - oracle jiniator :1.3.1.22
    OAS 10G (9041)
    DATABASE 9206
    - the complete version of forms : 9.0.4.0.19
    - we have 23 USERS.
    any help are welcome, the problem are urgent.
    thank you.

    Hi
    Lets analyse and hope to narrow down your issue
    We have used the Pick and Pack Manager to release goods from Sales Order through to Invoice. The functionality offered is good,
    > Slow performance could be triggered by multile issue  , so lets wait
    > Do you know PICKand PACK manager is only for status ,but it actually doesn't affect inventory level .
    but in practise the system is so slow it is taking 2 to 3 times longer than copying to a Sales Invoice.
    > You need to do delivery first and transfer the delivery into invoice .
    Is there any way of cutting out part of the process to speed things up? What we really need is to be able to create an invoice(s) straight from the Pick and Pack manager.
    >> It basically depends upon your business process . but by software , You can bypass Pick and PACK Manager process. You can transfer  your sales order into A/R invoice  and while posting A/R invoice , inventory will be reduced .
    Hope this help to narrow down your issue
    thank you
    Bishal

  • My keyboard is not activated when I want to start my computer. I cannot log on as I am not able to enter my password?

    My keyboard is not activated when I want to start my computer. I cannot Log on as I am not able to enter my password.
    When I log on as guest, I still not able to open my mail box for the same reasons, my keyboard is not activated.

    Did yoo go to Settings>iTunes and App Stores and sign out and sign back in?
    Next see:
    Frequently Asked Questions About Apple ID

  • Input Enabled Query - Web Template - Not able to change the key figure.

    Hello IP Gurus,
    This is a simple question .
    I have input enabled query and for all the KF's , I selected the radio button - data can be changed using user entries or planning functions , Equal Distribution and No disagrregation.
    I attached the query to a web template.
    When I execute the template I am not able to enter or change the key figures.
    Do I have to use any planning function to do that in the web template or I am missing any configuration . Please let me know how to change or enter the key figures
    Thanks
    Senthil

    HI Senthil,
    Please ensure that u have enabled the property  " start Query in changed Mode". This u can find it in the query properties under the advanced tab.
    For the Input readiness this alone is not enough.You have to use all the charecteristics that u have in the multiprovider or the aggregation level over which the query is built.
    regards.
    Shafi.

  • Not able to enter data in Function module

    Hi,
    I have created a function module with import parameter as a table.
    I have executed the function module from SE37 and tried to enter the data in the table.
    If I click the table...its not showing new line...its displaying a message that "THE OBJECT CAN ONLY BE DISPLAYED"
    I dont thinkso taht I have done a setting like this...
    please help me what might be the problem...

    Hi All,
    the issue has been resolved.
    data can be changed only if the internal table creation is not in the form of SORTED table.
    the internal table entries should not refer dataelement of type STRING.
    because of these two things, I was not able to edit the internal table in the function modul.
    thanks for ur replies.
    Sumithra

  • I am a nurse, I use Firefox for MUMMS charting. I am not able to enter, or look at a new admission. Please help!!!

    I entered an admission in my computer, and when I closed the visit and syncronized the visit, the admission for my patient disappeared---forever!! I did this twice and then did the admission on my husband's PC. When admission was completed, I closed the visit and syncronized the visit. I was able to view the admission on my husband's PC, and my coworkers were able to view the admission on their computers. I, however, was NOT able to view the admission on my laptop. When I bring up the patient's name I see a chart with nothing in it. I also show another visit for that patient that is opened with nothing in it. On my husband's computer I have no additional opened visit. I can chart on admissions already in the computer with no problem. I MUST use my laptop because I am a hospice nurse and I am on the road all day. MUMMS can be entered offline and then syncronized later. I called the teacher for MUMMS and she said this is a technical issue and thought that you might be able to connect into my computer to see what is going on. I do not want to post this question, it is too complicated and important. Thank you, Vicki Asaro

    Hi Vicki, when you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
    (1) Bypass Firefox's Cache
    Use Ctrl+Shift+r to reload the page fresh from the server.
    You also can clear Firefox's cache completely using:
    orange Firefox button ''or'' Tools menu > Options > Advanced
    On the Network mini-tab > Cached Web Content : "Clear Now"
    This may take a few minutes if you have accumulated a lot of cached files.
    (2) Remove the site's cookies (save any pending work first) using the following dialog. While viewing a page on the site:
    * right-click and choose View Page Info > Security > "View Cookies"
    * Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
    Then try reloading the page and logging back in. Will the data load?
    Note: this is a public site, so definitely don't post information on connecting to your laptop here!

  • Not able to enter the count for physical inventory document in WM

    Hi All,
    I have created a Physical Inventory document using LX16 t-code (WM managed). Since the material and bin stock is zero and When I try to enter the count by ticking zero stock indicator using LI11 t-code, I am not able to save the document and system throws error "Finding empty Quants provided for" and message number is L4058.
    Please let me know how to resolve this.
    Regards
    Krishnamurthy

    Yes your understanding is correct but only thing I have not entered qty in the count field rather I set only zero stock indicator.
    My requirement is " In Inventory (MMBE) stock of a material shows around "3000" qty. But In WM stock is "zero" and physically also "zero". so in IM also stock should be reduced to "Zero". So I tried of creating PI document in WM and then when I try to enter the count, I faced the menioned problem.
    Regards
    Krishnamurthy

  • Not able to enter a Distinct EA twice in the same Custom Section

    (Answering a question asked offline.)
    By design, you are not able to have the same Distinct Extended Attribute twice within a custom section. I believe you might be able to define it twice, but they can't both be the default. If you are allowed to do this then when you use the Customer Section on a spec, you cannot add the column or row with the second Distinct EA, unless you remove the first one.
    The basic rule that this follows is that a spec can only have one instance of a Distinct EA. This is because when you access a Distinct EA, you can access it by it's ID. If there are more then one with the same ID, then you wouldn't be able to access the EA by ID, since it would return multiple.
    For example, if you need to capture the PH level of a Material spec, if you just used a generic EA with an ID of 'value', then when you want to access it, say in a Calculated Numeric EA, you would have to access it using 'value'. If you also used this same EA to capture percent milk, and it was on the same spec, what would be returned when accessing 'value'? This is a problem.
    So instead, you should create a 'PHLevel' EA that is distinct and that would gaurantee that you can access it by ID.
    Segal
    Edited by: Segal on Jul 2, 2012 7:52 PM

    The issue was fixed after including the custom jar in esourcing90/lib folder and redeploying

  • Query Planning enabled - but not able to enter the data

    Hi,
    Created a query which is planning enabled (Check box ticked on Planning Tab in query designer - Start query in change mode checked).
    After execution of the query, if I try to input some plan data, the query is in display mode only. I am not able to input any data.
    Can you please tell me where is going wrong.
    Regards,
    Ravi

    Hi Ravi,
    First of all an input enabled query can only be created on aggregation level.
    As far as your issue is concerned, it seems that your query might not be having
    the required restrictions for the characteristics or are not drilled down.
    Please note that characterictics defined in rows are automatically restricted to a single value , but the same is not the case with the 'Free Characteristic' in the query.
    Please check the restrictions you have made in your query.
    Regards,
    Amit

  • Mac would not reply to Handoff encryption key request

    I have this handoff one way problem between 2 Macs and another iOS devices, a Macbook Pro can get see others handing off, but none of others can see anything from the Macbook Pro. After monitoring the logs and keychain, I discovered that the Macbook Pro simply won't reply to any Handoff encryption key request.
    I have cleared all the handoff related keychains off both Macs, and reproduced the problem. After rebooting both Macs, and an iPad. I got the following logs and keys.
    From a Mac Pro:
    Own encryption key
    iPad's key
    Log
    26/3/15 7:08:56.443 am sharingd[329]: 07:08:56.442 : Requesting Handoff encryption key from "McB iPad Retina"
    26/3/15 7:08:57.341 am sharingd[329]: 07:08:57.341 : Requesting Handoff encryption key from "Macbrush’s MBP Retina"
    26/3/15 7:09:17.945 am sharingd[329]: 07:09:17.944 : Requesting Handoff encryption key from "McB iPad Retina"
    26/3/15 7:09:17.946 am sharingd[329]: 07:09:17.945 : Requesting Handoff encryption key from "Macbrush’s MBP Retina"
    26/3/15 7:09:19.351 am sharingd[329]: 07:09:19.351 : Received a new Handoff encryption key from "McB iPad Retina"
    26/3/15 7:09:27.788 am sharingd[329]: 07:09:27.787 : Replying to Handoff encryption key request from "McB iPad Retina"
    26/3/15 7:10:28.947 am sharingd[329]: 07:10:28.946 : Requesting Handoff encryption key from "Macbrush’s MBP Retina"
    From the Macbook Pro:
    Own encryption key
    iPad's key
    Mac Pro's key
    Log
    26/3/15 7:03:31.157 am sharingd[310]: 07:03:31.156 : Requesting Handoff encryption key from "McB Mac Pro"
    26/3/15 7:03:51.661 am sharingd[310]: 07:03:51.661 : Requesting Handoff encryption key from "McB Mac Pro"
    26/3/15 7:03:52.561 am sharingd[310]: 07:03:52.560 : Received a new Handoff encryption key from "McB Mac Pro"
    26/3/15 7:08:56.544 am sharingd[310]: 07:08:56.543 : Requesting Handoff encryption key from "McB iPad Retina"
    26/3/15 7:09:18.040 am sharingd[310]: 07:09:18.040 : Requesting Handoff encryption key from "McB iPad Retina"
    26/3/15 7:09:19.227 am sharingd[310]: 07:09:19.227 : Received a new Handoff encryption key from "McB iPad Retina"
    From the look of it, either the Macbook Pro didn't receive any encryption key request, or was ignoring them for some reason. So the Macbook got everyone's key hence can see others' Handoff payload, but since none of others had the Macbook Pro's key, its payload could not be seen by any other devices.
    Now I know the cause, but I have no idea how to fix it. Any recommendation and suggestions would be very much appreciated.
    Cheers
    Kenneth

    Here is the results. BTW, that's the longest, messiest script I have ever  seen! :-P
    Start time: 01:23:08 03/27/15
    Revision: 1307
    Model Identifier: MacBookPro11,3
    System Version: OS X 10.10.2 (14C1514)
    Kernel Version: Darwin 14.1.0
    Time since boot: 1:27
    UID: 501
    USB
        v240b (Hewlett Packard)
    Activity
        en0: in 7, out 82 (KiB/s)
    Energy (lifetime)
        WindowServer (UID 88): 11.81
        kernel_task (UID 0): 6.52
    Memory (MB)
        kernel_task (UID 0): 1417
    Font issues: 6
    Listeners
        kdc: kerberos
        launchd: afpovertcp
        launchd: microsoft-ds
        launchd: ssh
    Diagnostic reports
        2015-03-26 Google Drive crash x2
        2015-03-26 discoveryd crash
        2015-03-26 sharingd crash
    HID errors: 10
    Kernel log
        Mar 26 21:20:33 key_getsastat: Error finding SAs.
        Mar 26 21:21:03 key_getsastat: Error finding SAs.
        Mar 26 21:24:20 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 21:24:28 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 21:25:22 utun_start: ifnet_disable_output returned error 12
        Mar 26 21:53:29 [IOBluetoothHostControllerUSBTransport][ReceiveInterruptData] -- kIOReturnAborted, data size is 0, but data in buffer -- (data Length = 39, packet length = 41)  Data Content:
        Mar 26 21:53:31 [IOBluetoothHostControllerUSBTransport][ReceiveInterruptData] -- previous data from kIOReturnAborted -- before combine the data (39)
        Mar 26 21:53:31 [IOBluetoothHostControllerUSBTransport][ReceiveInterruptData] -- previous data from kIOReturnAborted -- after combine the data (39)
        Mar 26 22:03:04 TLV Error:
        Mar 26 22:03:04 IO80211AWDLPeerManager::updateLocalRequests can't allocate service descriptor for add len 30 type 2 Tlv Error
        Mar 26 22:41:42 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 22:41:51 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 22:43:03 utun_start: ifnet_disable_output returned error 12
        Mar 26 23:24:32 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 23:24:41 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 23:25:04 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 23:25:13 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 23:25:18 utun_start: ifnet_disable_output returned error 12
        Mar 26 23:27:56 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 23:28:04 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 23:47:21 TLV Error:
        Mar 26 23:47:21 IO80211AWDLPeerManager::updateLocalRequests can't allocate service descriptor for add len 30 type 2 Tlv Error
        Mar 26 23:56:10 SATA WARNING: IDENTIFY DEVICE checksum not implemented.
        Mar 26 23:56:19 SIOCPROTODETACH_IN6: utun0 error=6
        Mar 26 23:57:45 utun_start: ifnet_disable_output returned error 12
    System log
        Mar 27 00:51:20 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:20 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:51:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:00 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:00 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:00 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:00 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:00 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:21 WindowServer: window b4 is already attached to window a9
        Mar 27 00:52:23 WindowServer: _CGXGetWindowOrderingGroup: Operation on a window 0xb4 requiring rights 0x5 by caller System Preferences
        Mar 27 00:52:58 WindowServer: WSGetSurfaceInWindow : Invalid surface 1117615552 for window 105
        Mar 27 00:54:14 CalendarAgent: Stream 0x7f9b13a613d0 is sending an event before being opened
        Mar 27 00:54:17 secd:  SOSCoderUnwrap dpZjh3pDb8IzCtdhnahlx6AVHS Decode OTR Protected Packet: The operation couldn’t be completed. (OSStatus error -25293 - dpZjh3pDb8IzCtdhnahlx6AVHS Cannot expose message: -25293)
        Mar 27 01:12:02 CalendarAgent: Stream 0x7f9b13b8a810 is sending an event before being opened
        Mar 27 01:18:33 Notes: Stream 0x60000010c570 is sending an event before being opened
        Mar 27 01:19:59 Notes: Stream 0x60000010a830 is sending an event before being opened
        Mar 27 01:22:48 Notes: Stream 0x60800010dc80 is sending an event before being opened
    launchd log
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.linebreak.CloudLoginHelper, error = 119: Service is disabled
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.radiantlabs.Living-Earth-Launcher, error = 119: Service is disabled
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.tencent.localserver, error = 119: Service is disabled
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.tencent.ScreenCapture, error = 119: Service is disabled
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
        Mar 26 23:25:15 com.apple.xpc.launchd.user.501.100007.Aqua: Could not import service from caller: caller = otherbsd.227, service = com.xlogteam.xloghelper, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = J8RPQ294UB.com.skitch.SkitchHelper, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.vladalexa.diskfailurehelper, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.linebreak.CloudLoginHelper, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.radiantlabs.Living-Earth-Launcher, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.tencent.localserver, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.tencent.ScreenCapture, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
        Mar 26 23:28:14 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.xlogteam.xloghelper, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = J8RPQ294UB.com.skitch.SkitchHelper, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.vladalexa.diskfailurehelper, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.apple.photostream-agent, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.linebreak.CloudLoginHelper, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.radiantlabs.Living-Earth-Launcher, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.tencent.localserver, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.tencent.ScreenCapture, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.whoisonmywifi.helperagent, error = 119: Service is disabled
        Mar 26 23:56:25 com.apple.xpc.launchd.user.501.100006.Aqua: Could not import service from caller: caller = otherbsd.224, service = com.xlogteam.xloghelper, error = 119: Service is disabled
        Mar 27 00:43:49 com.apple.xpc.launchd.domain.pid.iBooks.598: Failed to bootstrap path: path = /Applications/iBooks.app/Contents/XPCServices/com.apple.iBooksX-SecureUserDefau lts.xpc, error = 128: The specified path is not a bundle
    Loaded kernel extensions
        at.obdev.nke.LittleSnitch (4234)
        com.Cycling74.driver.Soundflower (1.5.1)
        com.squirrels.airparrot.framebuffer (3)
        com.squirrels.driver.AirParrotSpeakers (1.7)
        com.symantec.kext.internetSecurity (5.2.1f2)
        com.symantec.kext.ips (3.5.1f2)
        com.symantec.kext.ndcengine (1.0f2)
    System services loaded
        at.obdev.littlesnitchd
        com.DuetUSBDaemon.plist
        com.adobe.fpsaud
        com.apple.watchdogd
        com.cisco.anyconnect.vpnagentd
        com.microsoft.office.licensing.helper
        com.oracle.java.Helper-Tool
        com.oracle.java.JavaUpdateHelper
        com.symantec.liveupdate.daemon
        - status: 1
        com.symantec.liveupdate.daemon.ondemand
        com.symantec.sharedsettings
        com.symantec.symdaemon
        org.macosforge.xquartz.privileged_startx
    System services disabled
        org.openldap.slapd
        com.apple.mrt
        com.apple.PasswordService
    Login services loaded
        2BUA8C4S2C.com.agilebits.onepassword-osx-helper
        at.obdev.LittleSnitchUIAgent
        com.ApogeePopup.plist
        com.apple.mrt.uiagent
        com.cisco.anyconnect.gui
        com.google.keystone.user.agent
        com.oracle.java.Java-Updater
        com.symantec.uiagent.application
        org.macosforge.xquartz.startx
    Login services disabled
        com.apple.photostream-agent
    User services disabled
        com.apple.photostream-agent
    Startup items
        /Library/StartupItems/HWNetMgr/HWNetCfg
        /Library/StartupItems/HWNetMgr/HWNetMgr
        /Library/StartupItems/HWNetMgr/StartupParameters.plist
        /Library/StartupItems/HWPortDetect/HWPortCfg
        /Library/StartupItems/HWPortDetect/HWPortDetect
        /Library/StartupItems/HWPortDetect/StartupParameters.plist
    User login items
        Quicksilver
        - /Applications/Quicksilver.app
        Dropbox
        - /Applications/Dropbox.app
        Google Drive
        - /Applications/Google Drive.app
    iCloud errors
        bird 219
        cloudd 91
        comapple.InputMethodKit.UserDictionary 5
        storedownloadd 2
    Continuity errors
        lsuseractivityd 6
        Safari 1
        Contacts 1
        Calendar 1
    Restricted files: 106
    Data packages
        /Users/USER/Dropbox/apps/macjournal/MacJournal Data.mjdoc
    Contents of /Library/LaunchAgents/at.obdev.LittleSnitchUIAgent.plist
        - mod date: Jan  9 15:56:02 2015
        - size (B): 464
        - checksum: 2014742307
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>at.obdev.LittleSnitchUIAgent</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Little Snitch/Little Snitch Agent.app/Contents/MacOS/Little Snitch Agent</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.ApogeePopup.plist
        - mod date: Mar 10 09:46:31 2015
        - size (B): 640
        - checksum: 2520660496
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.ApogeePopup.plist </string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/unloadApogeePopupTemp</key>
        <false/>
        </dict>
        </dict>
        <key>RunAtLoad</key>
        <true/>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Apogee/ApogeePopup.bundle/Contents/ApogeePopup.app/Contents/MacOS/Apoge ePopup</string>
        </array>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist
        - mod date: Dec 20 23:50:41 2010
        - size (B): 734
        - checksum: 993854663
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
        http://www.apple.com/DTDs/PropertyList-1.0.dtd >
        <plist version="1.0">
        <dict>
             <key>Label</key>
             <string>com.cisco.anyconnect.gui</string>
             <key>ProgramArguments</key>
             <array>
                  <string>open</string>
                  <string>--wait-apps</string>
                  <string>/Applications/Cisco/Cisco AnyConnect VPN Client.app</string>
             </array>
             <key>LimitLoadToSessionType</key>
             <string>Aqua</string>
             <key>KeepAlive</key>
             <dict>
                  <key>PathState</key>
                  <dict>
                       <key>/opt/cisco/vpn/gui_keepalive</key>
                       <true/>
                  </dict>
             </dict>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
        - mod date: Oct 10 10:33:34 2014
        - size (B): 104
        - checksum: 2293328306
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.oracle.java.Java-Updater</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
        <string>-bgcheck</string>
        </array>
        <key>StandardErrorPath</key>
        <string>/dev/null</string>
        <key>StandardOutPath</key>
        <string>/dev/null</string>
        <key>StartCalendarInterval</key>
        <dict>
        <key>Hour</key>
        <integer>17</integer>
        <key>Minute</key>
        <integer>5</integer>
        <key>Weekday</key>
        <integer>1</integer>
        </dict>
        </dict>
        ...and 1 more line(s)
    Contents of /Library/LaunchAgents/com.symantec.uiagent.application.plist
        - mod date: Sep 13 11:59:24 2014
        - size (B): 476
        - checksum: 2715641560
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>com.symantec.uiagent.application</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Application Support/Symantec/SymUIAgent/SymUIAgent.app/Contents/MacOS/SymUIAgent</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist
        - mod date: Aug  8 14:34:37 2014
        - size (B): 668
        - checksum: 1602219417
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.teamviewer.teamviewer</string>
        <key>LimitLoadToSessionType</key>
        <string>Aqua</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer</string>
        <string>-RunAsAgent</string>
        <string>YES</string>
        </array>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer.app/Contents/MacOS/</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        <key>Disabled</key>
        <true/>
        </dict>
        </plist>
    Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
        - mod date: Aug 22 22:48:52 2014
        - size (B): 779
        - checksum: 2466887275
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>Label</key>
        <string>com.teamviewer.desktop</string>
        <key>LimitLoadToSessionType</key>
        <array>
        <string>LoginWindow</string>
        <string>Aqua</string>
        </array>
        <key>ProgramArguments</key>
        <array>
        <string>/Applications/TeamViewer.app/Contents/Helpers/TeamViewer_Desktop</strin g>
        <string>-RunAsAgent</string>
        <string>YES</string>
        <string>-Module</string>
        <string>Full</string>
        </array>
        <key>WorkingDirectory</key>
        <string>/Applications/TeamViewer.app/Contents/Helpers/</string>
        <key>RunAtLoad</key>
        <true/>
        <key>KeepAlive</key>
        <true/>
        ...and 4 more line(s)
    Contents of /Library/LaunchDaemons/at.obdev.littlesnitchd.plist
        - mod date: Jan  9 15:56:02 2015
        - size (B): 631
        - checksum: 4174275850
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>KeepAlive</key>
        <true/>
        <key>Label</key>
        <string>at.obdev.littlesnitchd</string>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Little Snitch/Little Snitch Daemon.bundle/Contents/MacOS/Little Snitch Daemon</string>
        </array>
        <key>RunAtLoad</key>
        <true/>
        <key>StandardErrorPath</key>
        <string>/Library/Logs/LittleSnitchDaemon.log</string>
        <key>StandardOutPath</key>
        <string>/Library/Logs/LittleSnitchDaemon.log</string>
        </dict>
        </plist>
    Contents of /Library/LaunchDaemons/com.DuetUSBDaemon.plist
        - mod date: Mar 10 09:46:31 2015
        - size (B): 697
        - checksum: 1799602859
        <?xml version="1.0" encoding="UTF-8"?>
        <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
        <plist version="1.0">
        <dict>
        <key>WorkingDirectory</key>
        <string>/Library/Audio/Plug-Ins/HAL/Apogee/DuetUSB/DuetUSBPlugIn.bundle/Content s/MacOS</string>
        <key>Label</key>
        <string>com.DuetUSBDaemon.plist</string>
        <key>KeepAlive</key>
        <dict>
        <key>PathState</key>
        <dict>
        <key>/unloadDuetUSBDaemonTemp</key>
        <false/>
        </dict>
        </dict>
        <key>ProgramArguments</key>
        <array>
        <string>/Library/Audio/Plug-Ins/HAL/Apogee/DuetUSB/DuetUSBPlugIn.bundle/Content s/MacOS/duetUSBDaemon</string>
        </array>

  • Not able to enter Apple ID

    Hello !
    I have bought an Iphone 5 from an auction house in Bulgaria . Unfortunatly this phone is locked to a user with e-mail :
    [email protected]   . I have wrote this user several e-mails asking for their password , just so I can enter the phone , change / delete this user and enter my own. This user answered us : What Iphone 5 ? Which means she has no idea about the phone at all or somebody else  has been using this email . Could you be so kind to give me the password for this account so I can enter and change it . Or if you can delete it from your system directly and I hope the change appears to my phone and I can enter my own user name and password ?
    Thank you in advance !

    You are not addressing Apple here. This is a user to user support forum. Besides that, Apple will not assist with this, as you have encountered Activation Lock. Unless you can make contact with the person that originally activated the device, it will be useless to you. I suggest that you return it to the place that you purchased it and demand a refund. You will not be able to activate this device.

  • Not able to enter data in query designer

    hi
    can any one help, i created a input ready query on multi provider contain both standered and real time cube, here real time cube not contain any data.
    when i created layout by taking 2 chracteristics and 2 key figures from real time cube it give me like " no data available".
    what i have to do here to enter data to realtime cube key figure

    First check if you have created aggregate level.
    Second check the loading behavior setting on the Realtime infocube- it must be set to "Real- Time Data Target can be planned, data loading not allowed’'.
    Third, query must be also input ready- in other words set the Selections (key figures) to input ready in Query designer.
    Finaly, when you open context menu over the query, Bex Analyzer' Analysis grid, you can check the input ready settings for every cell if you want. If you did all steps, mentioned in the text above, input ready check box will be automatically checked for every cell of input enabled keyfigures...
    Alex.

  • Not able to Enter the order  WareHouse is not populating

    Hi All,
    STEPS
    1. Navigate> OM Sales Orders>
    2. enter info on first tab.
    3. Select 'Others tab at header and
    4. crtl+L to activate the lov enter % for a full list.
    but here i am not getting any warehouse .
    this is R12.1.1 instance
    Please help
    Thanks,
    Satyam
    Edited by: user518033 on Dec 1, 2009 5:06 AM

    Hi Satyam,
    As asked by Mr. Nagamohan, could you please confirm what kind of environment you are using..Vision, Dev or test instance.
    In Inventory, did you define the Inventory Org for your Business..? If not.. try to define one Inv org, then go to SO Module and try to do the same exercise what you mentioned :
    1. Navigate> OM Sales Orders>
    2. enter info on first tab.
    3. Select 'Others tab at header and
    4. crtl+L to activate the lov enter % for a full list.
    We are sure it will atleast pull the new Inv org which you just defined...
    Good Luck...
    Regards,
    S.P DASH

Maybe you are looking for