WRT54G v6 Web Interface Not Loading Properly

I just bought a WRT54G v6 router. When I tried to configure it via the web interface at 192.168.1.1, the web page came up, but only partially. None of the links were visible. After reading other posts, I tried upgrading to the latest firmware WRT54Gv5v6_v1.02.2_fw.bin via the Management Mode because the normal web mode wasn't accessible. The upgrade appeared to work, but the following screen was blank instead of saying "Upgrade Success". I cycled power. The normal web page showed the new firmware version number, but the page still was missing its links. I tried the upgrade procedure again with the same results.
I downloaded the EasyLink Adviser and let it configure the router. It appears to have been successful. However, I tried the web interface afterwards, and the page is still not showing the links properly.
Is my web interface issue an indication of future troubles with the router? Is there any way to get the interface to work properly?
I have tried the web interface with both IE and FireFox, and with my firewall/antivirus software turned off. The Cisco logo indicator is the normal solid amber. The power light is solid on. The WLAN/1/Internet indicators are on and blink with net traffic. I cannot find any other indicators of router trauma other than the web interface.

Hi there, Lumen!
Have you tried resetting the router?
At the back panel of the router, you'll find a reset button on it. Press on it for 30 seconds while the router is on. After doing so, you could let go of the reset button and then take out the router's power cord for like ten seconds and plug it's cord back it. After that time, check if you'll have the proper lights on the router again and see if you'll be able to see the whole router's setup page this time.

Similar Messages

Actiontec MI424-WR web interface not responding properly

The web interface of my Actiontec MI424-WR rev c router, with firmware v 4.0.16.1.56.0.10.12.3, is not responding properly when I try to access it to configure the router or read the logs. It sometimes takes a very long time to respond, and my browser will say that "the connection to the server was reset". Has anyone else had this problem?
ps
I neglected to mention, it just started doing this recently, probably within the last two weeks or so, it was fine before.

annonymous009 wrote:
The web interface of my Actiontec MI424-WR rev c router, with firmware v 4.0.16.1.56.0.10.12.3, is not responding properly when I try to access it to configure the router or read the logs. It sometimes takes a very long time to respond, and my browser will say that "the connection to the server was reset". Has anyone else had this problem?
ps
I neglected to mention, it just started doing this recently, probably within the last two weeks or so, it was fine before.
Connecting to it it wirelessly or via cat5?
If wirelessly does the same occur if you connect hard wired.?
Any other routers on your LAN?
Any new wireless devices, phones etc, added recently?

SGE2000 Web Interface not loading

Getting a white screen in both frames of the web interface after logging in. Can't figure out why it won't load.
SW ver 3.0.0.18
Boot: 2.0.0.03
HW Ver: 00.00.01
Have tried using Easy Upgrade tool and get a warning : Did not find device information. Application will terminate.
Step1:Trying to open telnet connection...
Step1:Gathering information
show system--checking result for "show system unit 1-2
Step1:Type :
Step1:OID : 1.3.6.1.4.1.9.6.1.72.2000.2
Step1:Sys Name : Corporate
Step1:Location : ServerRoom
Step1:Sys Contct : IT
Step1:Mac-Address : f0:25:72:89:9e:e2
Has anyone else run into this issue? Any ideas how to resolve?

Hi parking, if the GUI will not load please try the following;
The same computer using IE, Firefox, Chrome,etc
Different computer with the mentioned browsers (preferably Windows 7 or older)
If none of these work, try to factory reset the switch as it sounds like the software is hung

Profile Manager Web Interface Not Loading

I set up a Mac mini with 10.9 and Server 3.1.2 to be our MDM server. After the initial configuration the https://<servername>/profilemanager and /mydevices web interfaces work just fine. I'm able to enroll five test OSX and iOS devices. Then I come in the next day and the /profilemanager web interface is unreachable. The /mydevices web interface still works though.
I tried reinstalling 10.9 and server and setting up from scratch and the problem repeats itself the next day. According to this thread deleting Server.app and reinstalling is one solution, but that did not work. I also tried resetting the Profile Manager, but that did not solve this issue either.
When trying to load /profilemanager on the server, a MacBook, and iPad, Safari will just hang when loading the page. The title bar changes to "Admin," the blue status bar hangs, and the page does not load.
This one is baffling. Any suggestions as to what to do would be most appreciated.

xcscredd(1156) deny file-read-metadata /Library/Server/ProfileManager
Process:         xcscredd [1156]
Path:            /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
Load Address:    0x10a244000
Identifier:      com.apple.XCSCredentialServer
Version:         1 (1.0)
Build Info:      255-XCSCredentialServer~32000000000000
Code Type:       x86_64 (Native)
Parent Process: launchd [1]
Date/Time:       2014-05-21 16:46:38.051 -0500
OS Version:      Mac OS X 10.9.3 (13D65)
Report Version: 8
Thread 0:
0   libsystem_kernel.dylib                  0x00007fff965a20aa __getattrlist + 10
1   Security                                0x00007fff8c81f9de ___ZN8Security15cached_realpathEPKcPc_block_invoke_2 + 260
2   libdispatch.dylib                       0x00007fff8c95a28d _dispatch_client_callout + 8
3   libdispatch.dylib                       0x00007fff8c95b146 _dispatch_barrier_sync_f_invoke + 39
4   Security                                0x00007fff8c81f864 Security::cached_realpath(char const*, char*) + 148
5   Security                                0x00007fff8c676529 Security::DbName::CanonicalizeName() + 209
6   Security                                0x00007fff8c676418 Security::DbName::DbName(char const*, cssm_net_address const*) + 144
7   Security                                0x00007fff8c68292c Security::DLDbIdentifier::DLDbIdentifier(cssm_subservice_uid const&, char const*, cssm_net_address const*) + 100
8   Security                                0x00007fff8c6c53a4 Security::NameValueDictionary::MakeDLDbIdentifierFromNameValueDictionary(Securi ty::NameValueDictionary const&) + 206
9   Security                                0x00007fff8c6c4e82 Security::KeychainCore::CCallbackMgr::consume(unsigned int, unsigned int, Security::CssmData const&) + 192
10 Security                                0x00007fff8c7f679b Security::SecurityServer::NotificationPort::ReceiveImplementation(unsigned char*, unsigned int, Security::UnavailableReason) + 189
11 Security                                0x00007fff8c7f686b ___ZN8Security14SecurityServer16NotificationPort7receiveERKNS_12MachPlusPlus7Me ssageE_block_invoke + 21
12 Security                                0x00007fff8c7f6839 Security::SecurityServer::NotificationPort::HandleRunLoopTimer(__CFRunLoopTimer *, void*) + 19
13 CoreFoundation                          0x00007fff9127e494 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
14 CoreFoundation                          0x00007fff9127dfcf __CFRunLoopDoTimer + 1151
15 CoreFoundation                          0x00007fff912ef5aa __CFRunLoopDoTimers + 298
16 CoreFoundation                          0x00007fff91239755 __CFRunLoopRun + 1525
17 CoreFoundation                          0x00007fff91238f25 CFRunLoopRunSpecific + 309
18 Foundation                              0x00007fff908cfadc -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 253
19 Foundation                              0x00007fff9091810b -[NSRunLoop(NSRunLoop) runUntilDate:] + 78
20 xcscredd                                0x000000010a245e6f
21 libdyld.dylib                           0x00007fff8c9585fd start + 1
Binary Images:
       0x10a244000 -        0x10a256fff com.apple.XCSCredentialServer (1.0 - 1) <75a88431-46dc-35fc-8350-f97c59b411df> /Applications/Server.app/Contents/ServerRoot/System/Library/CoreServices/XCSCre dentialServer.bundle/Contents/MacOS/xcscredd
    0x7fff8c670000 -     0x7fff8c8caffd com.apple.security (7.0 - 55471.14.4) <1d5da20e-db48-3e1d-9bf5-baa694192b25> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff8c955000 -     0x7fff8c958ff7 libdyld.dylib (239.4) <7c9ec3b7-dde3-33ff-953f-4067c743951d> /usr/lib/system/libdyld.dylib
    0x7fff8c959000 -     0x7fff8c973fff libdispatch.dylib (339.92.1) <c4e4a18d-3c3b-3c9c-8709-a4270d998de7> /usr/lib/system/libdispatch.dylib
    0x7fff90867000 -     0x7fff90b65fff com.apple.Foundation (6.9 - 1056.13) <2ee9ab07-3ea0-37d3-b407-4a520f2cb497> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x7fff911c9000 -     0x7fff913aefff com.apple.CoreFoundation (6.9 - 855.16) <a63e680e-e4b2-368b-8564-9dbe0d8ddb91> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x7fff9658d000 -     0x7fff965a9ff7 libsystem_kernel.dylib (2422.100.13) <498aebd7-4194-3cf2-aa16-d5d03ffbd8c0> /usr/lib/system/libsystem_kernel.dylib

Firefox web pages not loading properly

For the past few months I have been having problems with Firefox not loading some websites correctly. I have tried all the suggestions I have found when I Google the issue. I have created a new profile several times, I have constantly cleared my cache and cookies, I have uninstalled several times, and start in safe mode. All of these are just temporary fixes and the problem comes back in several hours to a day later. I can reload the web page buy holding down the sift button and then the pages load correctly. This is really starting to get frustrating and I'm seriously considering switching to IE9 or Opera, I only have the problem with Firefox. Can anyone help me?

This problem of Firefox occasionally failing to style pages, and being able to fix it for a while when you reload the page bypassing cached files (e.g., Ctrl+Shift+r), has been reported in several threads.
One possible cause is a corrupted cache. If you exit Firefox and rename its cache folder, Firefox should re-create a fresh cache. I have to research the steps for this if you want to try it.
Another potential culprit is an external program that removes files from the cache in a way that Firefox does not detect, so Firefox fails to re-request those files until you reload bypassing cache. Samsung's Support Center software (typically on newer systems) has been identified as one program that causes this problem, but there may be others.

Web gallery not loading properly

I have links to 3 lightroom galleries on my website. Most of the time the gallery will not load unless you click the refresh button. This happens with safari and explorer. Is this a known issue and is there a way to fix it? My site is built with dreamweaver and I have built in links to the flash galleries from lightroom which just spin their wheels. It says it is loading, but never does unless you refresh or go home and try again.
Thanks for any help.
Ted

I had the same problem but it went away when the galleries quit working at all <grin>. I think that module is really buggy. I did submit a bug report.<br />Mel

Web sites not loading properly / Account Error: Nonexistent

Something strange has begun happening with the websites I've been publishing through iWeb and Me.com -
When the site loads, parts of it are missing or load improperly, such as a picture, or a border around a picture, and so on.
However, the really strange part is that when I refresh the page, a different part of the website is missing or has loaded improperly, each and every time. It almost seems like the server is choosing at random which elements of the website to load, and which not to.
Often when refreshing, the site doesn't load at all, and a white page with the error, "Account Error: Nonexistent" appears, but upon refreshing again, the site goes back into its cycle of random loading.
This only started for me recently, and I would be greatly appreciative if anyone knows the cause and fix to this problem. I don't know if it's iWeb that caused this, or Me.com, or even something else I've done.
Thank you kindly!

I have exactly the same issue on several pages of mine. If I publish them on my MobileMe master Account or family member account, these random loading difficulties occur. If I publish on another Account that I got from Apple Support for testing, it works perfectly. So it has something to do with certain Accounts on MobileMe, for example with mine... In my case, the problem is always here, around the clock. If I reload the page, it usually works but not always.
Apples MobileMe support is on the case since 4 days, I will post results as soon I have any.
Sometimes, the menu of the page does not load, sometimes images are missing, sometimes fonts are wrong, sometimes the background is missing, sometimes I have an the message "Account Error: Nonexistent". When I reload the page, it usually works or the problem is slightly different.
I did publish the sites from scratch, without improvement. It happens on other browsers than Safari and on other OS like Windows XP. It really is a problem with MobileMe. UNACCEPTABLE !
www.sachenmacherei.ch

WRT54G help - Web pages not loading

I'm running a WRT54G v8.2 to link up my Intel Core Duo iMac (wired), and Xbox360 and iPhone (wireless.) Everything was working great until this morning when certain sites stopped loading or fully loading. (Have made no changes to any settings on the router or the computer.) Gmail and other simple sites are OK - but many other sites (including message boards and FedEx) don't work in any browser. I'm getting the same problem surfing the web on my phone - it's actually faster (and more reliable) to bypass my wireless network and just use my AT&T Edge. Xbox connects - but I haven't tried using it to see how fast the connection is. I downloaded the latest firmware and installed that - didn't seem to help much if at all. I've tried restarting my modem and router - and the problem seems to get better if I remove the router from the equation. Any bright ideas are appreciated - I'm an amateur at best when it comes to this stuff.
Message Edited by mikeandrae on 05-31-2008 08:38 AM

Click start >> Control Panel >> Internet Options >> Click delete cookies & files & clear history >> Under advanced click reset to defaults ....
Try any other browser ....
Or else ...change the MTU size to 1300 & click save settings. ..

Why is the Verizon Messages Web App not loading properly?

I use the Web App daily, but for the last two days the "loading" symbol just keeps spinning.... I've tried it in both Chrome and IE, but have not been able to get it to load. I've signed in without any issue.

perryfarms,
That certainly is not something we would expect to happen! Let's wake this up and get you moving with your messages! Do you have this same issue with a different computer? Have you tried deleting your computer's cookies and cache? When was the last time you were able to successfully view this messages page?
SandyS_VZW
Follow us on Twitter @VZWSupport

Edge Web Fonts not loading properly

I've been having trouble with the Adobe Edge Web Fonts loading within the past few days. Using four different ones, sometimes a couple but not all load at this point, and sometimes none. So not sure what the issue could be because it looks to be happening on different files and on different computers as well. Any suggestions?

Okay, so it seems like i can reproduce it on new files. The problem occurs from selecting certain fonts. Bangers is one i was using and seems to have issues after selecting. In the add font box, after selecting it, other fonts no longer become available and fall back to the default ones. So trying this on two different computers with a new file can mean it is either a web font issue, or some odd occurence my internet connection is causing. Any help is appreciated.

Cisco SA 520W Web Interface not loading.!!

Hi
Im going to start with saying this appliance is really winding me up!! The unit has been working fine for a while and i now need to make some changes. The unit is passing traffic fine, URL filtering is working fine however when i load the web page to control it says "The server is down.
Connection failed " I have rebooted the device numerous times with no luck. I have tried a different laptop, cleared out cookies and all ie cash. tried a different browser. To no avail. Am loosing faith in this device
Any ideas

Hi accidentexchange,
Did you fail to log in when accessing the SA 520W thru both HTTP and HTTPS?
https://LAN_IP_address_of_SA520W/
http://LAN_IP_address_of_SA520W/
Furthermore, can you give us an overview of your network topology and user info. If possible, can you provide us the configuration and dbglogs from your SA 520W so that I can forward to the development team?
To get the dbglog from SA520W, login through web UI and in the browser enter the following URL:
https://LAN_IP_address_of_SA520W/scgi-bin/dbglog.cgi
These logs will store password, so please remove any password sensitive information. Also if you are not comfortable posting the dbglog on the community, you can send it directly to me through private message.
Cheers,
Julio

Bridge Web Gallery Not loading properly in Browsers **HAAALP PLZ**

Ok so here is the deal.
Went to Bridge
Created Multiple Gallerys
Went to Dreamweaver
Created a page and inserted all the pertinents and such.
Uploaded to my site
Was happy.....
Good to go right? Well it looks all good, and the Gallerys perform as they should with one problem. My problem lies in the initial loading of the browser page. Every gallery loads on the page with the starting picture offset.
Is this a problem with the gallery file that bridge creates or is there something on my html file that needs to be edited to make this shizz load like pro?
Haaaaalp!
Here is the page in question: Polley3d.com - 3D Design Consulting Samples
Here is an image to see what the fuzz I'm talking about:

After waiting for 1 minute and 59 seconds during which 14.5 MB is processed, I am not surprised that style rules get mixed up.
Loading one gallery as in
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
</head>
<body>
<iframe src="http://polley3d.com/WebGallery/Joan_Landscape_Gallery/index.html"width="1024" height="768" frameborder="0" name="Joan_Landscape_Iframe"></iframe>
</body>
</html>
took a mere 16 ms and processed 287 B of data. No problem here.
As a side note, Flash is old old old technology.

Web page not loading properly after upgrade to 2.0

I have upgraded my ipod touch to 2.0 and I have had a few problems as 2.0 seems a little unstable. I'm sure Apple wll release a patch fix.
However I do have one problem with the upgrade which is annoying. I have a web page for my boys football (soccer) page which contains scrolling text within a web frame. This has always worked, but no longer does since the upgrade.
The URL is http://www.finchampsteadfc.co.uk/scriptsdir/team.php?season=0708&team=U8 if anyone has any ideas or is there a new setting I should use?
Thanks in advance

The source looks like this:
<script src="/i/javascript/htmldb_html_elements.js" type="text/javascript"></script>
When I paste the below url into the browser,
http://wmsi001370:7778/i/javascript/htmldb_html_elements.js
The javascript code is displayed fine. So it looks like the code is where is should be?
But doSubmit is not defined in that file. But there are other includes som maybe it is defined in those.
Message was edited by:
wmpelor

Not only do web pages not load properly but we're doing calculus on-line and only 1 video can be viewed at a time. last week we didn't have problem. wish i could call someone. not getting any help.

a number of site say done and we see a blank page. on-line calculus class, last week could view more than 1 video at a time now only 1 can be viewed. this course need to be completed by may 3. career builders some of the drop downs aren't working. need to find a job. these are serious errors that we did not experience before. we haven't updated to 4.0. now i see the one's who have are having these problems. daughter can't gt to e-mail. wish i could talk to someone. i'm going to try the live session at 2 but i'm not a techy. can take care of most problems, but this seems beyond me. HELP
s

If you are wondering why you are not getting any responses, it is because you have vented a complaint without any details that make any sense or give anyone something to work on.
If you want help, I suggest actually detailing what has happened, with versions of software etc. Anything that would let us assist.
As a start I am guessing that you have not really got the hang of "How it all works". Firstly download the Pages09_UserGuide.pdf from under the Help menu. Read that and view the Video Tutorials in the same place. A good addition would be the iWork 09 Missing manual book and something to help you learn how to use your Mac.
If there are specific tasks you need help with:
http://www.freeforum101.com/iworktipsntrick/index.php?mforum=iworktipsntrick
Is a good resource.
Peter

Web pages not loading properly

Cannot access webpages, its connected because I can check my mail and shop in the store. It will load a webpage but the address bar at the top stays highlighted whilst the page will load but I cannot do anything with it as its greyed out. How do I sort it

Many thanks the reset worked, thats saved me a fifty mile round trip to the local apple store. Its what I thought I needed to do, just didn't know how.

WRT54G v6 Web Interface Not Loading Properly

Similar Messages

Maybe you are looking for