WRT54G V8 randomly disconnects/"powers off"

Well, I'm having an issue here. I got a WRT54G V8 two days ago, so it's brand new. Anyway, I have this problem where the router randomly "powers off". By that, I mean that the power LED (orange light) goes off for a few seconds, then comes back on. The other lights stay on. When this happens, everything will get disconnected from the internet - my computer, my Wii, etc. However, everything go back to normal quickly after. I also had to disconnect/reconnect it once because nothing would be able to connect on the internet anymore, and the Linksys EasyLink software seemed to be convinced that I changed the router. After that happened, I decided to upgrade it to the latest firmware version. While this last problem didn't happen ever since, the power led still goes off randomly and I still get disconnected from the internet. Other than that, everything works like a charm and XP never gives me any network errors or anything of the sort. It's just that this issue is quite annoying when you're gaming and makes me wonder if I bought a defective one...
Any help?
Oh, and in case you need more information... the computer has a wired connection to it, as my PS2, my Wii uses a wireless connection, and so does my DS when I use it. When the power light goes off, everything gets disconnected, wired or not. Also, I'm on a cable internet connection, the modem is a Motorola SURFboard SB5100.
Message Edited by Kelmster on 02-07-2008 12:45 PM

Okay, now I'm getting quite a bit annoyed. The problem keeps coming back randomly. Sometimes, it'll happen once or twice in a day and fixes itself quickly. But other times, like today, I feel like throwing it out of the window. Plus, I've been reading a lot of topics in here, and a lot of people seem to have the same issue as me. The orange light doesn't go off anymore, but the internet connection is being dropped randomly with no warnings, and the internet light does stay on. Power is not flashing, everything seems well when I look at the router. When the internet goes off, I can still access the router. I tried pretty much everything I saw in here, from disconnecting it and the modem for like a half hour to changing the IPs (gave everything on my network a static IP, even tried changing the router's IP), but that only fixes it for a couple of minutes, then bam, the problem comes back. Also did a factory reset, and yes the firmware is updated, but sadly, the problem is still there. It was there from day 1 and it won't go away. I have no idea if it has to do with my Wii accessing the internet wirelessly while it's on WiiConnect24 (it connects randomly to check for updates). It would make sense if it did that everytime, but sometimes I play online on the Wii and the internet connection still works on my wired PC.
Seriously, is there anyone with a clue? I'm seriously thinking of returning it. I bought it to replace a noisy no-name wired router that seemed to like to make me mad. However, the Linksys one is giving me MORE problems! Is this a firmware or hardware issue here? Because I see a lot of people with the same issue, which makes me wonder if exchanging it for another one will actually change anything! I usually figure out problems by myself, but I have to say that this one has me clueless here. And, so far, in many, if not all, the cases where I was clueless about a problem, it was because of faulty hardware/software. The no-name router never dropped connections, and yet I always feared that it would explode in my face. But seriously, this is getting ridiculous. At this point, I actually wish that the problem is something stupid I forgot about, some setting that's hiding from me and that I have to activate/deactivate... I just wonder if exchanging it will fix the problem here.
Is there anyone who actually managed to fix that issue? If so, how did you do it? If you didn't, post here too, we need to make Linksys aware of that issue. Disconnecting the power every half hour or so is not a good solution. I hope it's just a firmware issue that could be fixed soon...

Similar Messages

WRT54G v5 Randomly Disconnects

Hi, I have been having this problem for the last couple of weeks and am not sure what the problem is. My WRT54G v5 router is connected via Ethernet cable from a cable modem to 2 PCs. Lately, the router randomly disconnects(i.e. there is no set amount of time in between disconnections - the interval has been as small as 30 seconds and as large as several hours), then reconnects automatically. Every time it disconnects it reconnects itself. However, I'm pretty sure this is not typical behavior and would like to fix it - especially as it severely limits online gaming. When I take the router out of the loop and connect either computer straight to the cable modem, I have no problems no matter how long I seem to be online. I have updated the router to the latest firmware version and that has no effect. If anyone has any ideas or suggestions, I would be very grateful.`Thank you for your time.
Message Edited by Hodges on 06-06-2008 04:59 PM

I have already upgraded the firmware to v1.02.5 build 002, Jan. 9, 2008, and I haven't noticed an improvement. Like I said, it's completely random. Some days it won't disconnect at all. Other days it disconnects fairly often. But I have no problems when I bypass the router and connect straight to the cable modem. Thank you for the response. If you have any other thoughts, I'm open to suggestions.

WRT54G wireless randomly disconnecting

I've never had this problem before but recently I am constantly being disconnected from the net. What's strange is that everything seems to be perfectly normal, it just.. dies.
All the lights on my modem and router are the way they're suppose to be, however nothing works, not even my routers setting page works. The only way to fix this is to turn my computer off, turn my modem off and unplug everything from my router then turn and plug everything back on. However this does not always fix it, but it allows access to my routers setting page.
In my router settings, everything is normal, i go to my status page and disconnect and reconnect manually, however this takes a few attempts and sometimes it gives me the error "Can not find IP address on this PPPoE server".
Does anyone have any idea what's going on here? I've never encountered this problem before nor have I even heard of this kind of problem.
If needed my router is a Wireless-G, Model WRT54G, Ver. 8, Firmware Version: v8.00.2

The same thing happens to me with my cable modem and it is new. I can get as long as 5 hrs or as little as 1 hr before the internet just dies. The modem is still working but I have to switch everything off and then restart my PC just to get back on the internet. Would the fact that my OS is Vista be a problem?
Also, I am fairly basic in terms of my computer literacy, so what it bridging and how can I check and see if this would aid me?
-----Abernyte the computer-noob

T400 powers off or stands by randomly

My T400 has been doing the following 2 things randomly within the past week:
1) Without warning, system shuts down without blue screen. No lights are displayed, even when on AC power. Clicking power button does not reboot. However, found a solution online on some other forum that involved disconnecting battery and power, pressing power button 10 times and then on the 11th time, holding power button for 30 seconds. This works for me.
2) System randomly goes into standby mode, long before power management options should kick in (battery charge shows as 100%).
Could this be a battery fault issue or something else entirely?

Yea your running a bit warm.
If you giv your unit a good workout constantly that CPU grease and tend to burn up / dissiapate and/or you just need to dust out your fan.
If you want to confirm it's heat run the stress test under the Lenovo Toolbox.
If it's powering off while running that, and it's nto powering off when doing trivial applications (Notepad, WebSurfing) then it's most likely your fan.
Work on that first and if your still having problems hit us back up.
Could need a BIOS update. Could be further Hawrdawre issue.

MacBook Air Late 2012 randomly powers off. Won't stay on longer than 2 minutes.

I have a MacBook Air late 2012 model.
Every time I try to Reinstall OSX or try to run any diagnostics. It wont stay on long enough to finish anything. Some times it wont come on when you press the power key. I just does the Apple chime and then it could be 5 seconds or 2 mins but it always powers off.
I called Apple because the SSD was recalled for that year and the symptoms of a failing hard drive is random rebooting or powering off. So apple said they would fix it for free.
I am not near an apple store so I took it to an Apple licensed Technician to get the new SSD. I got a call a few days later saying that the SSD was fine but I need a new Logic Board. He said it was the most expensive part of the laptop and that sounded very convenient for him that I need the most expensive part, about $478.00.
I would like to know the symptoms of a Failing Logic Board and the SSD
I can never get a straight answer from reading Apples forums.
This laptop was 1300.00 new and I had to buy it from my Ex again for 200.00 when she couldn't fix it. So im tired of putting money in a laptop that cant even run games or hold my entire iTunes Library lol.
If anyone has had this same problem let me know.
I'm afraid that its an easy fix and they are just trying to get more money.

I have a MacBook Air late 2012 model.
Every time I try to Reinstall OSX or try to run any diagnostics. It wont stay on long enough to finish anything. Some times it wont come on when you press the power key. I just does the Apple chime and then it could be 5 seconds or 2 mins but it always powers off.
I called Apple because the SSD was recalled for that year and the symptoms of a failing hard drive is random rebooting or powering off. So apple said they would fix it for free.
I am not near an apple store so I took it to an Apple licensed Technician to get the new SSD. I got a call a few days later saying that the SSD was fine but I need a new Logic Board. He said it was the most expensive part of the laptop and that sounded very convenient for him that I need the most expensive part, about $478.00.
I would like to know the symptoms of a Failing Logic Board and the SSD
I can never get a straight answer from reading Apples forums.
This laptop was 1300.00 new and I had to buy it from my Ex again for 200.00 when she couldn't fix it. So im tired of putting money in a laptop that cant even run games or hold my entire iTunes Library lol.
If anyone has had this same problem let me know.
I'm afraid that its an easy fix and they are just trying to get more money.

IPhone 4 keeps powering off at random times

My iPhone 4 keeps powering off at random times, I have restored it 3 times. It was real bad like every 15-20 mins, but after the restore, it is random.
It may turn off 2 times in an hour and be fine the rest of the day. Or it may turn off every 4 hours...
Nothing triggers it more then Ipod setting, Listening to the ipod.
Any Ideas?

I had only the base apps. No music no other apps. Just played around with settings and checked mail. It did it with that as well.
Took it to my local apple store. They replaced it. New phone going strong so far. Full restore. All apps, all music, all ringtones, and movies. No issues so far... Seems like it was just a bad phone. But they took care of it!

My iPhone 4S keeps randomly powering off

Do you know why my iPhone 4S keeps randomly powering off? I have rebricked my phone and it still does this.

Are you using a case with your iPhone? It could be holding down the power button on the top of the iPhone.
You can try restoring the iPhone as a new device, if that doesn't do it send it in for service.

Imac g5 (no iSight) - powers off randomly, please help!

greetings!
my imac g5 (approx 2.5 yrs old) has recently started to power off all of a sudden while i'm working on it. after it powers off, i am not able to turn it back on until after approximately 10-15 minutes.
i'm thinking about taking it to the apple store for help unless someone can advise or provide some thoughts on why it may be doing this and what i can do to prevent it.
thanks.

http://docs.info.apple.com/article.html?artnum=300908 Troubleshooting when your computer won't turn on
http://docs.info.apple.com/article.html?artnum=86817 iMac G5: Loose power cord could cause power loss
If none of the suggestions in this thread are of any help, then you need to provide more details about your comp.
Which "model" & "generation" G5 iMac do you have?
Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
Thank you

WRT54G version 6 random disconnects

I have upgraded the firmware, reset, rebooted, everything the non english speaking tech support told me. The router still randomly disconnects. The only way to fix it is to reboot it. HELP. I am a gamer, and cant have this.

LOL.... been there... done that. Modem is fine. I've sifted through these forums and the FAQ's before I made a post. All the noob steps have been done man. Trust me. I did come across somewhere else though that the newer versions of this modem are made with less memory and therefore may be a hardware issue that can't be fixed. Is this true?Message Edited by Mojofoot on 02-12-200707:40 PM

Anyone else experiencing this? WRT54G version 6 random disconnects

My router randomly disconnects from the internet and only a reboot will get it back. Very bad for gaming. I have updated the firmware, reset, and reboot the router countless times. I have cable internet, so I disconnected the computer from the router and hooked it directly tot he modem.... no disconnects. Any suggestions?
(Edited for guideline compliance. Thanks!)Message Edited by JOHNDOE_06 on 03-05-2007 09:22 PM

I don't suppose a version 6 can be downgraded to a 3 with just a firmware change? Anyway, I too have had many problems of dropping connections and having to reboot my laptop and re-running "Secure Easy Setup". Today I downgraded my security settings from WPA-Personal to WEP 128 bit and so far have had no dropouts. Wonder if anyone else has tried this approach? If so, then Lynksys needs to do some serious re-working of their security software. BTW, I was never able to make WPA-2 ever work...system always reverted to WPA-Personal.

IMac, update causing black screen and randomly powers off...?

I've seen many comment on this with few solutions. It had never occurred until yesterday afternoon after the latest security update for Mavericks, 2014-005 v.1, was loaded and the system was rebooted. After that moment the mac has been unusable. It will start and after user log on, will black screen, sometimes still running and other times instantly powered off. I have followed resetting the PRAM, and SMC procedures with no change and have booted into safe mode in order to examine the system and it is just as unstable there. The times I have gotten it booted and running, attempting to access an earlier Time Machine backup, but before I can start reload it goes black. The same goes while trying to check the sleep mode and security settings. Unless this is an amazing coincidence, I believe the latest update has caused this problem and has for others as I have seen on many conversations. Can this be uninstalled or does the drive need to get wiped and then reload from the Time Machine?
Thanks.
iMac, A1311 21.5" Mavericks 10.9.5 Update 2014-005 v.1

Well, initial call into Apple Care and one answer. "We have no idea what it is, we can get you an appointment at a Genius Bar in 4 days!" 4 days?! Seriously? At least they were kind enough to only put me on hold for 30 minutes, AND then transferred me to a "Sr. Care Specialist" who basically blew smoke up my arse only to tell me the same thing... why transfer me at all?

Sporadic random disconnects this week, very bad to...

I've never had any problems with BT Home 2.0 until this week, I have moved nothing about in my room nor adjusted any settings on the hub and my PC. I have changed the filter and still the same problems occur. I've noticed a lot CRC /HEC errors on the up stream... I live in Bristol if that might help to solve the problem. Maybe something next door could be affecting the line or a BT engineer has messed around with something on the exchange? (I am using a wired connection BTW). Any help and suggestions appreciated, thanks, Rob.
ADSL line status
Connection information
Line state
Connected
Connection time
0 days, 0:10:20
Downstream
9,727 Kbps
Upstream
636 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.5
Latency type
Interleaved
Noise margin (Down/Up)
7.5 dB / 8.5 dB
Line attenuation (Down/Up)
33.5 dB / 18.4 dB
Output power (Down/Up)
21.0 dBm / 12.4 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
0 / 208
CRC Errors (Down/Up)
44 / 2147480000
HEC Errors (Down/Up)
nil / 566812
Error Seconds (Local)
39
TCP/IP settings
Broadband network IP address
81.151.168.20
Default gateway
217.32.141.33
Primary DNS
194.74.65.68
Secondary DNS
194.72.0.114
C:\Users\Robin>tracert 217.32.141.33
Tracing route to 217.32.141.33 over a maximum of 30 hops
1    94 ms    98 ms    99 ms BThomehub.home [192.168.1.254]
2    16 ms    16 ms    16 ms 217.32.141.33
3    18 ms    18 ms    33 ms 217.32.141.78
4    16 ms    16 ms    15 ms 217.32.141.33
Trace complete.

Sorry I can't offer any magic suggestions.   I had been getting regular disconnects for some months and even though I was keeping the router continuoulsy powered to avoid loss of line synchronisation it still was occurring.   See my comments in the thread "Re: Disconnects on Accessing HH and Random Disconnects at Night" for 10 Feb.
The Forum Moderators were very helpful and responded to my queries and arranged four visits from OpenReach to try and sort out the problem.    Eventually they decided that there was a fault in the exchange boards and made some change. Subsequently I kept the router powered up until the 13 May to make sure there was no synchronisation interrupts.   The line eventually stabilised at 14,336 kbps.   It has remained at that even with my logical disconnects at night from the HH Home Page.
I found from a search back in Jan as reported in the thread "Re: HH Type B Energy Consumption & Switching Off the Router" , that the Type A software version was 8.1.H.J. I don't know if it has been upgraded since.   I have found for my Type B that when received it back in Oct 2010 the ver was 4.7.5.1.83.3.5. and it is now ....83.3.18.   - when it was changed/upgraded I don't know.
As I say, although I still get random disconnects, it doesn't seem to affect my line rate.   Not sure if it is noise on the line (i have made a quiet line check and that is OK) as the Noise Margin is ca 7.6-9.1dB. I get disconnects sometimes when I try to look at the ADSL Settings, etc., having typed in the password for access. I have just looked at my Events Log and there have been a number of disconnects today since the router was logically connected at 14:04 this afternoon; 5 in total I think!   And the rate is still shown as 14,336 kbps.
Jun 3 21:29:30 2011    (26713.110000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 18:26:16 2011    (15719.410000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:25:47 2011    ERR 2011-06-03T17:25:47Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:25:46 2011    (15688.810000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:25:46 2011    (15688.740000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 18:06:05 2011    (14507.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 18:05:35 2011    ERR 2011-06-03T17:05:35Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 18:05:34 2011    (14476.950000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 18:05:34 2011    (14476.890000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 15:03:16 2011    ( 3538.970000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 15:02:48 2011    ERR 2011-06-03T14:02:48Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 15:02:46 2011    ( 3508.470000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:34:10 2011    ( 1793.130000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:33:41 2011    ERR 2011-06-03T13:33:41Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:33:40 2011    ( 1763.120000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:33:40 2011    ( 1763.070000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:06:16 2011    ( 119.040000) WGET: Error connecting to host https://pbthdm.bt.motive.com/cwmpWeb/CPEMgt (66.193.112.93:443)
Jun 3 14:05:44 2011    ( 109.480000) RTNL: Received ERROR reply 'No such process' for message type 0x19
Jun 3 14:05:39 2011    ( 104.560000) Admin login successful by 192.168.1.64 on HTTP
Jun 3 14:04:43 2011    ERR 2003-01-01T00:00:27Z cwmp: mt_cwmp: session error: Could not resolve host
Jun 3 14:04:39 2011    ( 44.450000) danube_dsl_ioctl:88: Failed ioctl 250 errno 22
Jun 3 14:04:39 2011    ( 44.380000) danube_dsl_ioctl:88: Failed ioctl 270 errno 22
Jun 3 14:04:23 2011    ( 28.920000) DVA started
Jun 3 14:04:23 2011    ( 28.170000) sys_if_stats_reset failed for atm0
Having said that your rate is quite reasonable and unless you are playing games or watching videos perhaps the interrupts will not be serious.   We only use it for email, family history, ebay and browsing so it is not really noticeable.
Rodney Fry

Powering off and Drivers problem.

Hi,
I just built my new rig afew days ago and all was well for until this morning. My rig keeps powering off by itself (no bsod or anything even though auto shutdown is disabled) and the power led on the case starts to flash on and off every second also the keyboard seems to still remain active (numerical lock led stays lit but non of the keys respond). The shutdown occur randomly and the only way to power back up is to disconnect the power cord for afew minutes and try again. I will be replacing the cheapo power supply with a Enermax EG465AX-VE in afew day hopefully but before I go out and blow £70 on one could anyone confirm this to be the most likely solution or could I try something else first.
The second problem I have got is that I can't install the Via 4in1 drivers (v4.51) and/or detonator drivers for the MSI FX5600XT card with out getting random lockups/frezzes and some programs failing to install e.g 3dmark2001 hangs half way through installation. I have re-installed Windows and am using the standard MSI drivers that came with the card. I also managed to install and run 3dmark2001 and Prime95 for 12 hours without any problems. But once I installed the Via drivers and/or Detonators /v45.27/v52.14/v56.64... and have AGP mode 8x enabled, I started to get those random lockups again so I uninstalled them.
Any ideas would be greatly appreciated.
System Spec:
AMD A64 3200+ with retail HS/F (Idle temp:42C, System temp: 36C)
MSI-6702 K8T800 Neo FIS2R with Bios rev: 1.4
2x 512Mb DDR400 Geil Value Ram (running at CAS: 2.5, TRAS:6, TRCD:3, TRP:3, Bank Interleaving:Auto, Burst lenght:8 Beat, AGP Mode can only select: Auto) @ 200Mhz) at v2.55 in bios.
Maxtor 160Gb SE
MSI FX5600XT with standard MSI Drivers (v5.2.1.4) that came with the card. Agp Fastwrites disabled, Apature 128Mb in bios, AGP mode: none.
DLink 530TX NIC
Plextor 40-12-40 CDRW (Secondary master)
Lite-on DVD Player (Secondary slave)
CTK el cheapo "550W" PSU (Max output 3.3v:28a, v5:45a???, 12v:20a) v3.3+ v5 combined: 280W.
Windows XP Pro with SP1 no updates added atm.

Hi,
I have installed the via drivers after uninstalling the MSI detonators then reinstalled detonator v56.72. I can now faithfully reproduce the 'invite loop error everytime I click on the FX5600XT tab in display setting and am getting a 'infinite loop error' 0x0..0EA. I have swapped both sticks of ram around tried one at a time but no joy.
@jacko
I am currently running on one stick , no shutdowns yet but it's still early days.
kHel.

OS X Lion - iChat keeps randomly disconnecting me!

I am using OS X Lion and I love iChat. It combines both simplicity and powerful usage in a nicely designed app. I don't want to use any other alternatives. I want my iChat to work again.
Has anyone been facing the same problem ? iChat keeps randomly disconnecting!

Hi,
In previous version of iChat that could log into AIM with (or without) SSL had two Server names that used to show depending if you used ther SSL or not.
The names of the server used to change as you selected or deselected SSL
SSL was added in iChat 4 to the AIM logins
The server name was slogin.oscar.aol.com
It was known that this server seemed to be less stable than the "regular" Server (login.oscar.aol.com)
This may have been due to the lesser number of server involved with any SSL Logins and any drop at the server end was therefore more noticeable.
It is also known that AIM require that any dropped SSL connection is manually restarted and should not rely on Automatic reconnection.
This generally means that if you are using SSL then you will need to do a manual reset and restart of iChat if the connection is lost.
(hence my suggestion earlier that SSL be turned Off for AIM logins until the Servers had become more stable.
iChat 6 (in Lion Also automatically changes any account that logs in to AIM to the api.oscar.aol.com server.
It appears that this server can handle SSL and non SSL logins (there is no name change).
You can manually change iChat to use the older server variants.
7:57 PM Tuesday; December 13, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Envy 15t powers off

My Envy 15t has been powering off while I'm working on it for no apparent reason. I have contacted technical support via chat a couple of times. The BIOS was updated on the first session and a couple of drivers on the second, but they have not solved the problem. Has anyone seen this problem?

Hi @Kouberator ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP ENVY 15 and just randomly starting to shut down.
I recommend to restore the BIOS defaults. You could restore the BIOS with this document selecting the reloading the BIOS default settings which could help.
Here is a document on overheating which has many fixes that could help as well.
I recommend to do a system restore. System restore will help if something automatically updated and did not go well on the Notebook. I would suggest a date of just over a week before the issue started.
When performing a System restore please note remove any and all USB devices. Disconnect all non-essential devices as they can cause issues.
Please let me know how this goes.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

WRT54G V8 randomly disconnects/"powers off"

Similar Messages

Maybe you are looking for