WRT54G V8 Slow as hell wireless connection

Im about to go on a killing spree because I cannot figure this out. I have a desktop connected to the router. The router to the modem. I can get on the internet fine with nice speeds on the desktop. When I connect wirelessly with my laptop it is slow as hell. Wont load anything than after 2 minutes it will load it all at once. I have no idea what the heck is going on. I've changed settings and changed them back in the router config. What could possible be causing this??????

I have exactly the same problem with my WRT54g V8 router. My Dell laptop takes forever to load web pages. My desktop "flies" when connected via ethernet but slows like the laptop when I connect wirelessly using a USB wireless adapter WUSB54G.
When I connect to my neighbors Netgear wireless, everything is very fast. When I use my old Microsoft wireless router, things are very fast. When I go back to the Linksys, SLOW SLOW SLOW!!!!!!!
I have updated the firmware to no avail. Changed channels and turned off all wireless security.....no change!!!
I am running Windows XP SP2 and using Comcast cable broadband.
Any suggestions would be greatly appreciated.
Bob

Similar Messages

How to set up WRT54GS so the wired and wireless connections both work?

I have a DSL line in to a Motorola modem.
The modem is connected to the WRT54GS with an ethernet cable.
When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet. I have 3 computers plugged in, but none of them connect via Ethernet..
Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity. When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device. I don't want to change this setting because I want to use the router for the wireless capability. Besides which, I have more than one computer to connect to the internet.
How come I cannot just plug in and go?
My firmware version is v2.07.1.
I don't know how to find out what hardware version I have.
Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"
I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
Thanks in advance.

Just click this link.

Slow wired and wireless connections on new Mac Pro

I have a new 6-core Mac Pro with 64GB RAM that I seem to be having major network issues with. When I restart or first switch the machine on it's fine but after a few minutes the network (web browsing) become painfully slow - when I run a speed test it come out at ~2Mbit/s. This is the same whether I connect on a wired or wireless connection. I've tried various connections including a complete bypass of my time capsule to a direct wall connection that should be giving 100Mbit/s. When i run a speed test on my iPhone connected to the time capsule via 5GHz I comfortably get >60MBit/s.
Is there a bug in the latest OS 10.9.4 my MBAir also seems to require a lot of restarting to keep up even basic web browsing???

Your Macs are always looking for a better connection. To that end, they are evaluating every possible way to get to the Internet.
It is very important that you limit those choices to only the ones you actually want to connect to, and indicate that the other are "off the list", literally.
For example, to test your wired network connection, Ethernet must be at the top of the list AND WiFI must be OFF. (Otherwise, your Mac will be checking WiFi to see if it seems to be getting a better connection over WiFi. In the screenshot below, Ethernet is at the top of the list, so it is likely to be used, but since WiFi is still ON, it may be used instead.
To check YOUR WiFi connection (and not your neighbors' connections), you need to BOTH check that the "ask to Join new Networks" box is checked:
and that the Networks you wish to join are shown in the order you wish to join them. All extraneous networks should be removed from this list:

WRT54G No longer available as Wireless Connection, Cat5 connect without issue

Without changing a single setting I can only appear to go wireless on the neighbors unsecured network OR plug in the old Cat5 leash. My network no longer appears as an option when attempting to connect wireless. It's consistent across two laptops. Any ideas?

This appears to be similiar to my problem. The router worked fine via wired connections but the wireless connections failed. The real problem was that the router was not issuing IP addresses to any clients connected via wireless.
The clients recognized the router and connected utilizing WEP 128 bit encryption. However, the DHCP in the router never issued an IP address thus no connection to the internet.
As it turned out it appears to be related to the latest firmware update issued by Linksys. In my case 201.13 for the WRT54G3G-ST sold by Sprint. I ended up at one point with 2 routers from Spring and both of them had the same problem after upgrading the router firmaware.
To get around the problem I had to perform a hard reset and restore the router to factory defaults. I can change the router name without issue as long as the name is 8 characters or less. I was utilizing the name of spiderweb and that causes the problem. The client PC's would see spiderweb and connect but never got an IP address. Also activating WEP in either 64 or 128 bit encryption causes the same problem so I am currently running the system in "open" mode.
Hopefully the next firmware update release will have these issues addressed.

WRT54GS v.6 and Axim wireless connection

Have been battling this with 2 different routers. First was a WRT54G and now the WRT54GS. When I connect wirelessly with my Dell Axim x51v the connection only lasts about 1 minute then degrades down to nothing, but still shows connected. I have latest firmware for the router and the Axim. I have tried connecting to other routers with no problem, so I know this has to do with this router (manufacturer) and maybe I'm missing some setting somewhere. Any help would be appreciated.

Hi , you will have to make a few changes to your wireless config.....bring up the router setup bu http://192.168.1.1 "admin" is the password....go to the wireless section and select channel 11 , enable WEP under wireless security and then go to advanced wireless settings....reduce the beacon interval to 50 and reduce the RTS and fragmentation threshold by 40 each.....save settings and then check if this improves your wireless signal.

WRT54G v.6 loses wired/wireless connection after 2 hours

I have been trying for two weeks to get my router to maintain connection to both my wired and wireless computers. It drops after 2 hours. It says it is connected but I can't get anywhere. I have DSL with a static address. I put the static IP on the router and have the router DHCPing to the others. Have "live chatted" with Lynksys 4 different times with no luck. Based on live-chat advice, I have updated the firmware to 1.01, and changed the MTU from 1500 to various other numbers with no positive results. Both computers drop at the same time. If I take the router out of the loop and plug straight into the DSL modem, it stays up forever. I run XP home on my wired computer and XP Pro on my wireless laptop. I am at my wits end and would appreciate any help that you can offer.

It didn't like that either! I got to thinking about how it said that I was still connected but I couldn't get anywhere so I called my ISP today and had them double check my connection. The technician said that I was having abnormally high errors rates going out of my dsl (new, had it replaced recently) modem. He had me reset the modem, then reset the router, update my DNS numbers.......same thing, about 2 hours later, DROP! I have about decided that it is a problem between my dsl modem and router instead of my router and computers. For one thing, I reset everything during my lunch break. Back at work, right after lunch, I could ping my static IP on my router but, sure enough 2 hours later, I couldn't ping it despite my ISP saying I was connected. That leads me to believe my router doesn't like my modem or vice versa! Any other suggestions?

Orange Livebox & MacBook Pro Slow wireless connection

Hello,
Looks like we are a lot experiencing a slow or sporadic wireless connection.
I have done all updates, the MBP finds the livebox and connect properly but I have a very slow connection.
Lan connection is working fine and quick.
Please could somebody help me, this is my first Mac, if there is any tips or tricks to get a normal wireless speed.
Cheers.

What kind of wireless router or access point are you using?
Are you getting full signal?
Is the wireless router or access point around anything with a lot of metal or..
since you said that when you connect to your modem via ethernet then you could have a problem with your wireless infrastructure... if you have tested your wireless network with another computer and it works fine or if you went somewhere that has a hot spot then you can determine if there is an issue with your home network or an issue with the wireless card in the laptop...

WRT54G - Slow wireless connection

Hi,
I installed WRT54G router last week for my wireless connection. Right form the very first day, i have been seeing slow/sporadic connection speeds. I also upgraded my firmware version (8.2) & it doesn't help. I have given the output of IPCONFIG /ALL for your reference. Please guide me if you find anything odd.
Windows IP Configuration
        Host Name . . . . . . . . . . . . : venki
        Primary Dns Suffix . . . . . . . :
        Node Type . . . . . . . . . . . . : Hybrid
        IP Routing Enabled. . . . . . . . : No
        WINS Proxy Enabled. . . . . . . . : No
        DNS Suffix Search List. . . . . . : hsd1.ct.comcast.net.
Ethernet adapter Local Area Connection:
        Media State . . . . . . . . . . . : Media disconnected
        Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet NIC
        Physical Address. . . . . . . . . : 00-0A-E4-D5-26-CA
Ethernet adapter Wireless Network Connection:
        Connection-specific DNS Suffix . : hsd1.ct.comcast.net.
        Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection
        Physical Address. . . . . . . . . : 00-12-F0-D0-2B-5F
        Dhcp Enabled. . . . . . . . . . . : Yes
        Autoconfiguration Enabled . . . . : Yes
        IP Address. . . . . . . . . . . . : 192.168.1.101
        Subnet Mask . . . . . . . . . . . : 255.255.255.0
        Default Gateway . . . . . . . . . : 192.168.1.1
        DHCP Server . . . . . . . . . . . : 192.168.1.1
        DNS Servers . . . . . . . . . . . : 68.87.71.226
                                            68.87.73.242
        Lease Obtained. . . . . . . . . . : Thursday, July 17, 2008 11:49:44 AM
        Lease Expires . . . . . . . . . . : Friday, July 18, 2008 11:49:44 AM

Not sure if you performed this or not, once you do a factory reset, immediately after that you are suppose to perform a factory reset by holding is the reset button in on the back of the linksys router for 30 seconds, then wait about 2-3 minutes for the router to sync back up.
Important = Write down your previous settings in the router as they will be erased and you will have to manually input the info.
Hope that this will help,
Ttech
If not, try this
Here are some steps to follow for a slow or poor connection.
1.      Give your network a unique SSID and do not use Linksys and set your SSID Broadcast to enable.
2.      You can also try A different channel. There are 11 channels and 1, 6 or 11 is better
3.      You can try raising your router approximately 4-6 feet above the floor and make sure the antennas are vertical.
4.      access your wireless software by going to your Profile or preferred networks, if any are named Linksys or ones that you do not know please delete them. Go to the settings or properties and check the information to make sure it is correct.
5.      See if there are any updated drivers to download.
6.      Try to use WPA encryption if you can
*** As always upgrade to the latest firmware
Good luck,
Ttech

Very Slow Wireless Connection

I bought a while ago a WRT54G V6.0 and although the wired connection works pretty well, the wireless connection is very slow, I have trouble accessing web pages but once it enters a site i can navigate through it without a problem, but when I go to another website I struggle to enter. I have tried updating the router several times, changing the transmission channel and it seems nothing works. could someone please help?

try changing the MTU size on the router ui in the following order .... 1492 , 1452 , 1365 ... check whether it makes any difference ...

WRT54G very SLOW Wireless

All-
I hope someone can help me with this problem. I have a WRT54G v8 router and a PC with Vista. My ISP is Comcast, and I am paying for 12 Mbps. When I plug my computer directly into the modem or router I get speeds usually about 6 Mbps, sometimes up to 8 or 10 Mbps. However, when I connect to the internet through my wireless connection it is VERY SLOW. The connection is only about 200-400 Kbps. I have all ready spoken to one of the technicians at Linksys. They advised me to change the following settings:
On the setup tab, Make MTU "Manual" and size 1365.
On the Wireless tab, set to Channel 11.
On the advanced wireless settings, set Beacon Interval 50 and Fragmentation Threshold and DTIM Interval to 2304.
In the Security Tab, uncheck "Block Anonymous Internet Requests" box.
I made these changes, but my connection is still very slow (380 Kbps).
Help!
Thanks!

As you have already made the changes on your router, and still its not working. Have you tried upgradeing the firmware of your router? If not then you can Go to website linksysbycisco.com/downloads.........insert model no of your router in serach tab......select proper version of your router........download the firmware file......save that file on desktop.
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router : Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
Once you configure all the settings on your router, Below are the wireless settings which you can change on your router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bits.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

WRT54G - V.7 - Wireless connection problem - more users

Hi all,
i have the router WRT54G v7 - firmware 7.00.8
I noticed that when we are in 3 or 4 wireless clients the connection is very unstable, slow response (few minutes), connection drops, latency to a server increases from 50ms to 1000ms for few seconds.
Somethimes it's impossible to access to the internet ...even to the router pages (192.168.1.1.).
Connection seems fine in the Win 7 wireless conectivity ... but when you try to access to the web or ping a site, the results are random. Somethimes gives a response .. but mostly not-reachable.
Is there anything i can do to solve or at least improve this matter?
Ty for any tip,
Frluga

Hi, around the beginning of June we had power outages and around six of them in three hours. The computer would not turn on and the wrouter is fine and the modem is too. I just bought a ps3 the other day and I thought I could get directly onto it by the wrouter to the modem online. the wrouter distance is aroundthirty feet straight line except they are on differen floors. the signal is 100% and the sucerity is wpa-psk (TKIP). i use to be able to hop right on w/o the security and it was in none. there is an error message saying that key exchange timed out. i have been doing some reading and wondering why no one uses the wpa-psk(TKIP) connection. but it seems to be a simple fix just eneter it manualy for wep. my question is, is wpa-psk ... a longer exchange time to do than wep. also could i switch the wrouter to my second comp, change the settings to wep and put it back on the modem to the broken down computer.

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

2007 Macbook Pro, Wireless connection slows to a crawl or drops out!

Hi all, I have recently started having problems with my 2007 15" 2.16ghz Macbook Pro and the wireless connection to my router.
Quite often it will say I am not connected to the network, the Airport symbol will fluctuate between full bars and no bars and when it does connect, the speed is awfully slow, it regularly hangs on a webpage for a few seconds before loading it up.
It is not the router as my Girlfriend has a white macbook and when I am experiencing problems she is not. Does anyone have any suggestions as to what may be the problem, is the wireless card on it's way out??
btw the airport details are:
Wireless Card Type: AirPort Extreme (0x168C, 0x87)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: 1.4.10.3
Current Wireless Network: SKY10597
Wireless Channel: 2
Thanks, Nick

You might try a different channel, but the iBook result belies there being a high probability of success using this approach. You could try a different browser. Does the problem also occur when you are very close to the WAP? Your card might be old enough to be malfunctioning. Given the recent experiences of others, I don't recommend doing any updates in trying to solve the problem. Have you done any Airport related updates lately?

No wireless connection on WRT54GS

The wireless connection on my WRT54GS (v6, firmware 1.50.9) seems to have died. The WLAN light still comes on, but neither the downstairs PC nor my PSP can locate the network, even though the router is set to broadcast the SSID. Rebooting makes no difference. Cabled connections (PC and PS3) still work perfectly well. No settings have been changed on any of the equipment, so I suspect that something has gone wrong internally. The router is just about within its warranty period, so is there anything I can try - any diagnostic software, for example - or should I just get it replaced?

You can try to update the firmware of the router, to check if that stops connection dropping. To update the firmware of router try this: 1. Go to www.linksys.com/download and select correct model number and version number. Download the firmware and save it on your computer. 2. Check the file it sould be firmware image file like .bin etc. If it is a compressed zip file extract it to get firmware image file. 3. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 4. Go to administartion tab there 5. Go to fimware update sub-tab there 6. Browse for the firmware image file and click update 7. when update completes turn off modem & router. 8. After 2 minutes turn on modem and after 2 more minutes turn on router. To get network key, connect your computer to one of the four ports on router using ethernet cable. 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. Use your password if you have changed it earlier 2. Go to wireless tab. 3. Go to wireless security sub-tab 4. If security mode is wpa or wpa2 note down passphrase/shared key, if security mode is WEP note down wep key number 1. This will be your network key Well you need to input all the wireless settings of your wireless network on Wii. To get these settings: 1. Open setup page of router by typing http://192.168.1.1 in browser’s address bar, and typing password as "admin" and no user name. 2. Goto wireless tab. Here you will get the wireless network name/SSID. Here make sure wireless SSID broadcast is enabled. 3. Now goto wireless security sub-tab and here you will get the security mode and the security key. If security type is WPA note passphrase/shared key, and if its WEP note down wep encryption level and key 1 from listed 4 keys....& it will definately work!!!

WRT54GS v7 loses wireless connectivity after 15 minutes or so

I just installed a WRT54GS v7 router to work with my cable modem. It has the latest firmware. The wireless connection seems to work for about 15 minutes or so at a time and then it stops working. I can't even get to 192.168.1.1. The only way to get it to work is unplug the router and plug it back in. Originally, I thought it was interference from my 2.8GHz cordless phone, so I unpluged it. But that still didn't fix the problem. What could be the problem? Thanks.

@mallinj
Hi,
Disconnect from Internet.
Uninstall from Your system audio drivers.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Restart Your system:
On boot press ' F8 ' and choose ' Safe mode '.
Go to Control Panel -> Devices Manager -> Network Cards
and find there Athero Wireless card. Click on it with right button of Your mouse and choose uninstall driver.
Restart Your system and this time start it in normally.
Install latest driver:
Atheros Wireless here (ver 8.0.0.238 for 32/64 bit Win7)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

WRT54G V8 Slow as hell wireless connection

Similar Messages

Maybe you are looking for