Wrt54g v8 web interface does not load properly

Hi,
There is a similar thread concerning the v6 web interface, where the background loads, but no text and no links. I also see some data in my case, using a v8 router.
I do not want to start with a firmware upgrade since I am not sure which version I have, since the interface does not work. The v6 problem seemed to be related to Zone Alarm, but I am not using that. I tried shutting down my firewall - didn't help.
I am using Vista SP1, tried IE7 and Firefox.
One thing I did notice was that during router config using the supplied tool there was an error about failing to load a language pack. I wonder if there is anything I can do about that. The original plan was to use the web UI to investigate, but as I said, the web UI won't load properly.
Thanks

Insert the CD for the router setup .... do not run the Setup ,,,,,
Right click & explorer ... it shows folder for language .... open it ... & choose the sorrect language ...

Similar Messages

Transmission web interface does not load until I restart daemon

I'm prefer using the transmission web interface to manage my torrents, when I run the daemon and connect to kiwi:9091, it works fine (kiwi=localhost). However when I restart and try to connect to the web interface I am unable to connect.
Google Chrome reports:
Oops! Google Chrome could not connect to kiwi:9091
and Firefox says:
Unable to connect
Firefox can't establish a connection to the server at kiwi:9091.
Even though I've enabled the transmission service:
# systemctrl enable transmission.service
and the service is running after a fresh boot:
$ systemctl status transmission.service
transmission.service - Transmission Bit Torrent Daemon
Loaded: loaded (/usr/lib/systemd/system/transmission.service; enabled)
Active: active (running) since Wed 2013-03-06 12:10:05 GMT
Process: 398 ExecStart=/usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid (code=exited, status=0/SUCCESS)
Main PID: 444 (transmission-da)
CGroup: name=systemd:/system/transmission.service
└─444 /usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid
When I restart the service, the web interface works fine.
# systemctl restart transmission.service
# systemctl status transmission.service
transmission.service - Transmission Bit Torrent Daemon
Loaded: loaded (/usr/lib/systemd/system/transmission.service; enabled)
Active: active (running) since Wed 2013-03-06 11:20:48 GMT; 35s ago
Process: 1313 ExecStart=/usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid (code=exited, status=0/SUCCESS)
Main PID: 1314 (transmission-da)
CGroup: name=systemd:/system/transmission.service
└─1314 /usr/bin/transmission-daemon --pid-file /run/transmission/transmission.pid
Mar 06 11:20:49 kiwi transmission-daemon[1314]: Loaded 2 torrents (session.c:1943)
Mar 06 11:20:49 kiwi transmission-daemon[1314]: Port Forwarding (NAT-PMP) initnatpmp succeeded (0) (natpmp.c:72)
Mar 06 11:20:49 kiwi transmission-daemon[1314]: Port Forwarding (NAT-PMP) sendpublicaddressrequest succeeded (2) (natpmp.c:72)
Mar 06 11:20:51 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Found Internet Gateway Device "http://192.168.1.254:8000/jd877ogd4w2/IG...p.c:200)
Mar 06 11:20:51 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Local Address is "192.168.1.79" (upnp.c:202)
Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Port forwarding through "http://192.168.1.254:8000/jd877ogd4w2/IGD/upnp...p.c:277)
Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding (UPnP) Port forwarding successful! (upnp.c:280)
Mar 06 11:20:53 kiwi transmission-daemon[1314]: Port Forwarding State changed from "Not forwarded" to "Forwarded" (port-forwarding.c:93)
wat?

I too had the same problem as you. And then I found this:
https://bugs.archlinux.org/task/31478

A specific web site does not load properly. I have looked through java help, firewall help and have not found a solution.

The web site www.everbank.com has been updated. It has a 3 panel display in the top half that rotates through the three offerings and you can pause it if you wish. It does not display on Firefox. I am using 19.0.2 and it says it is up to date. Everbank has looked into and it displays correctly for them and it displays correctly for me on IE9. I inadvertantly have the beta version of Mozilla (19.2) on my desktop and the web page displays correctly there. I have cleared the cache, looked at firewall settings (Windows 7) and have added Mozilla. Nothing has helped.

It works for me as long as JavaScript is enabled. If it's not enabled, I get a jumble of text as the 3 slides are superimposed on one another. Do you just get a blank area?
Since you cleared your cache, out of data pages, style sheet, and scripts shouldn't be a factor. Could you also clear your cookies for the site? While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Remove the everbank cookies individually there, then try reloading the page. Does that make any difference?
When you compared with the beta version of Firefox, were you running with the identical settings folder, i.e., same bookmarks, settings, and add-ons? I'm guessing there might be a difference.
To check for potential add-on conflicts, try disabling ALL nonessential or unrecognized extensions here, then restart Firefox:
orange Firefox button (or Tools menu) > Add-ons > Extensions category
Any luck?

User Interface does not load SRP527W

Hi,
Apologises if this question has been asked before.
We have a SRP527W router, and for some odd reason the web interface does not load.
The device has been reset to factory defaults countless number of times and sometimes I can get in but than once you save something you cant get back in.
I have completed the following steps
1. Tested via multiple browsers, (Firefox, Chrome & IE)
2. Reset router to factory defaults
3. Router can be pinged on 192.168.15.1
4. Installed Firefox extention to test with previous IE versions
5. When I managed to get into the router, I ran a restore with a backup config that worked
6. Telnet function is blocked but dont have the ssh details. (tried: admin admin, admin password, cisco cisco, cisco password)
7. add http://192.168.15.1 to the safe list
The odd thing is sometimes the web interface loads and sometimes i just get a blank page.
Any suggestions?

You are welcome
Now that you are able to login, either move or delete enough files to get at least 10 GB free, 15 would be better.
A tool to help with that is OmniDiskSweeper.
Allan

U300 Touchpad Driver for Windows 8 Does Not Load Properly

I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
A standard mouse works just fine (albeit without any Win8 functionality).
***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

Hi,
If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system.
Meanwhile please try to enable or disable Secure Boot by referring this article:
Secure Boot
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
Kate Li
TechNet Community Support

Web site will not load properly -- gettting an error msg

getting the following error wile logging into a web site :
URL: https://xxxxx.xxxx.xxx .....
Line 3609
Message: self.mainapp is undefined
Firefox is the only browser which does not load this properly.
An suggestions ? I cleared cache and cookies already

gapple3 wrote:
2 days ago a favorite web site that I visit daily will not load now???? I do not get any error page. It just keeps trying and trying but will not load. I have tried several things, checking pop up blocker, cleared cache, cookies, temp. internet files, etc. Any ideas????
Check the route with the use of the tracert command at the command line. tracert server or site name. This will show you where the connection stops. It could be lost on someones router, or the site could be down. Just an idea to get you in the right direction.

TestStatnd operatore Interface does not close properly

Hi
I am using LabVIEW 8.2 and TestStand 3.5. I use the default Operatore Interface (full featured) provided by NI. The TestExec.exe does not close properly when I exit the application. Everytime the process is running in windows. I had to use Windows Task Manager to kill the TestExec.exe manaully.
Is there a fix for this?
Thx
Abdulla

Hi,
Do you start any new executions either from within your sequences or from within a step that you are not closing properly?
Regards
Ray Farmer
Regards
Ray Farmer

WRT54G v5 admin screen does not load completely

I have a WRT54G v5 and when I go to the admin screen (http) it does not load completly. It was working the other day. I was in the process of downloading a newer version of the firmware, I am using 1.0.6 and was looking at the 1.0.9. I have it on the computer but have not applied it to the router yet.
I am using IE7 and was able to view the page previously with IE7 but am not able to now. I have rebooted the router (cold start). No difference. I can still get to the internet and the wireless is working also, I just cannot make any changes to the router.
I need help, if someone is willing.
Thanks
Dave

Check if your firewall is on. I was having the same problem and I just shut down Zone Alarm...

Safari 5 does not load properly.

Im using a MacBook Pro (Late 08) w/ Snow Leopard and Safari 5.0.1
Pages do not load for me at all.
For instance id go to www.espn.com and the loading bar in the address bar goes and stops www.esp|n.com, just like that..and same goes with every other website out there. After about 10 to 15 minutes it finally loads the page but the page does not load like a normal page, its all on the left side looking like a cell phone site back in the day.
I need anything that will help me out. That actually works.

HI,
Login to another user account. Try Safari there. If you can load pages in that account, then log back into your user account and try troubleshooting the Safari .plist file.
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop. Now launch Safari. If Safari loads web pages as it should, them move the .plist file to the Trash.

First page does not load properly

This is a simple but quite annoying problem. Basically, whatever page opens first when FireFox loads does not display correctly. Images are missing, mediaplayers are gone, and the most of the page appears as unformatted text.
If I refresh the page, it will load and display correctly.
Also, apparently at random, other sites I visit during the course of browsing will encounter the same problem and not display properly, and these will NOT display correctly if I refresh the page.
Here are links to some screenshots of this problem:
http://i52.tinypic.com/2mfkos8.jpg -
Firefox opened this page after I installed RoboForm.
http://i52.tinypic.com/9k11qe.jpg -
My homepage (Google.com) opens with the familiar Google logo replaced by small text saying "Google".
http://i53.tinypic.com/2v0dbt5.jpg -
Google.com will display properly if I refresh the page.
Thanks ahead of time for the help! I can provide additional details and screenshots if needed.

If it works correctly in [[Safe Mode]], try [[Troubleshooting extensions and themes]].

Hp software interface does not load after installing printer 6500A plus

I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
more info:
1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
2. installation of the software (the full package) completes with no errors
3. printer prints fine and scans throught the printer interface wihtout a problem
4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
dontknow what to do next

Hello Salmonela,
Welcome to the HP Support Forums!
That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
Let me know if this clears things up.
Happy Turkey Day!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Safari 3 update does not load properly

After running the latest OSX update which included Safari 3 update. Safari opens to a blank page
(even though I've given it a home page address) and displays the message:
Safari 3.0.4 (v523.12) has not been tested with the plugin (null) (null) (v0.62). As a precaution, it has not been loaded. Please contact the plugin developer for further information.
Anybody know what that means? And how can I stop it from happening?

IBod,
Thanks for the advice, you are a miracle worker.... or at least way more info filled than me.
My Safari loads properly now. What's puzzling is that I never downloaded or installed that software.
Thanks again.

Amazon https does not load properly

I cannot access my Amazon account (using '''https''') with Firefox.
Images do not load ''when using https''. As the "Continue" button is an image, it does not appear on the page.
This only happens with Amazon (.com, .co.uk and .fr) and no other secure website.
To access my Amazon account, I have to use IETab, IE9 or Chrome, as the problem ''only'' exists with Firefox.
I have restarted with all add-ons disabled: no change.
I have updated all the plugins: no change.
I do not use any "https-only" add-on.
This problem used to happen very occasionally and would disappear, but it is now permanent.
I see other Firefox users have been reporting the same problem for at least a year now, so this is not unique to me.
Any suggestion welcome...

Solution:
There is problem with the SSL-Certificate of the Amazon images Server
The SSL Website of Amazon want to load a Javascript form https://images-na.ssl-images-amazon.com and this gives an Javascript error in FF:
''fwcim is not defined
Quelldatei: https://www.amazon.de/gp/css/homepage.html?ie=UTF8&ref_=topnav_na
Zeile: 902''
To solve this error open the page https://images-na.ssl-images-amazon.com/images/G/03/x-locale/common/login/fwcim._V182746877_.js direktly.
FF will show a certifacte problem (see grafik).
trust the site and add the Server to the trustet sites and all will work.
Perhaps it is only a problem of Firefox, because IE and Chrome will work.
It's a COMODO certificate.
Wolfgang

HELP! Web pages are not loading properly or not at all!

This just started happening about a week or so ago and my laptop is only 3 months old. I typically use Safari and when this started happening I downloaded Google Chrome and it happens using that also. Either the browser can't find the specified web page or it loads all yucky down the left side of the screen. Also, pictures in my email aren't loading anymore either. This all happens sporadically but enough that it's driving me crazy!

Live chat was closed when you were in the queue that is why I linked you here.
Is the problem still present in safe mode?

EBay 'Contact seller' page does not load properly ie no message box appears

When using eBay link 'Contact seller' the page which opens does not show the box in which the message must be entered. The other browser that I use does not have this problem and it has only just become evident in Firefox. I get the same result when trying to make contact through individual seller feedback page links
== URL of affected sites ==
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350371900978&ssPageName=STRK:MEWAX:IT#ht_1151wt_913

PC Version, I have Found the Ad Block Plus to be the culprit

Wrt54g v8 web interface does not load properly

Similar Messages

Maybe you are looking for