WRT54G V8 will not let me set wireless security

I'm attempting to do a manual setup of a WRT54G V8 (i.e. not using "SES" or the windows-based setup program). However, when I go to the "Wireless Security" tab, it refuses to let me select anything other than "Disabled" for the security mode setting. Any other option will just set the pulldown back to "Disabled". Any suggestions? No other settings seem to affect this.

As you are able to access the routers set up page ….click on “Administration” tab…..click on “Firmware upgrade”
Download the latest firmware version 8.00.02 from http://linksys.com/downlad ….upgrade the firmware …reset & reconfigure the router.

Similar Messages

HT201441 I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but st

I have a used ipad mini. I did a reset on it and I am trying to set it back up, but it is still tied to last users iTunes ID and will not let me set it up with mine. Any ideas. I tried setting it back to factory defaults with usb cable, but still no go. How do I activate ipad mini with my iTunes ID.

delete the email account and try again

The ios7 download will not let me past the security section in the setup. how do i get past it?

the ios7 download will not let me past the security section in the setup . how can i get past it?

Hey 6bigdog6,
Thanks for the question. It sounds like the album has been synced to your iPhone from iTunes. To delete synced photos, you’ll want to uncheck the album in iTunes:
iTunes: Syncing photos
http://support.apple.com/kb/ht4236
To delete synced photos and videos from your device
1. In iTunes, click the Device button in the upper right corner. (If viewing the iTunes Store, click the Library button in the upper-right corner first.)
2. Click the Photos tab in the resulting window.
3. Choose "Selected albums" and deselect the albums or collections you want to delete.
Note: To delete all synced photos, deselect "Sync Photos from" and, when asked, click "Remove photos."
4. Click Apply.
Thanks,
Matt M.

HT5312 It will not let me change my security passwords? What do I do?

My ipad will not let me change my security passwords and question and I don't know what to do

What do you mean 'my iPad will not let me change my security passwords' ? You are following the instructions on the HT5312 page that you postedi.e. if you have a rescue email address (which is not the same thing as an alternate email address) on your account then steps 1 to 5 half-way down that page should give you a reset link.
If you don't have a rescue email address (you won't be able to add one until you can answer your questions) then you will need to contact Support in your country to get the questions reset (these are user-to-user forums).
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset (and if you don't already have a rescue email address) you can then use the steps half-way down the HT5312 page that you posted from to add a rescue email address for potential future use

HT1918 will not let me change my security questions

I just put my itunes on my laptop and it will not let me change my security questions. When I try to change the questions, it says save and change, but it does not save my changes. Please help, because now I am locked out of purchasing anything from itunes. Thanks.

Click here for information. If you can't reset them through the method described in that article or by sending yourself a rescue email(the email may take a few hours to arrive), contact the iTunes Store staff via the link in the 'Additional Information' section.
It isn't possible to create a rescue email address without correctly answering two of the questions. Nobody on these boards can reset them for you.
(95491)

Safari will not let me go to secure websites.

Safari will not let me go to secure websites. Its only been when i have been trying to purchase something on the web. It happens with multiple websites. I dont know if this is related but it also kept saying i was in another country. I couldnt go to travelocity.com just b/c it said i was in another country and needed to go to thier travelocity site.
Thank you for any help.

Mac OS version?
Safari version?
Exact, complete text of error messages?

Not working right-will not let me type a new emall, pull contacts, also will not let me use wireless printer-kept shutting down windows.

firefox will not let me type in yahoo mail as new email. will not pull up contacts. also, when I use wireless printer-it shuts down windows.

Couple of points...
DJ_Jynxx wrote:
The thing is, this MUST be an Audition CC issue for two reasons. One, everything worked fine in CS6, which I was using right before I upgraded to CC. I even did a clean install of it by removing CS6 completely.
All versions of Audition can co-exist on the same machine quite happily - there is no interaction between them at all, and the system was designed to be like this. So there's nothing to stop you keeping CS5.5, CS6, CC and even Audition3 on the same machine.
The other thing I'm wondering about is Windows 8. There have been a considerable number of complaints about this doing weird things, including with Audition. I have a system that in many ways is very similar to yours, except that I don't overclock the mobo, and use a professional sound device (or two) with it (RME). The major difference though is that I use Windows 7 pro 64-bit, and I haven't had any of these problems at all. Yes I use it for a living, as well, but I don't bother with multiple DAWs - don't have time for all that these days. But I do use iZotope's RX software in its standalone mode without any difficulty.
I'm not claiming that Audition CC is trouble-free - any number of Mac users will confirm that - but people running it on W7 certainly seem to have far fewer problems with it. It may also be worth trying an uninstall-reinstall of CC - you never know. But differences in preview quality certainly point towards audio drivers, I'm afraid...

My neice entered my daughter's information to set up itunes and she is too young and now it will not let me set up an itune account on the ipod touch in my name..it states I don't meet the age requirements. Please help!!

My niece entered my 11yrs information when setting up her new ipod touch for itunes and now it will not even let me get on itunes on the ipod. How can I fix this?

Try editing the account on a computer
iTunes Store: Changing Account Information
Next try creating a new account using the same email address.
Last, contact iTunes by:
Contact iTunes

In firefox re bank transaction it will not let me put my security in drop down box yet will in internet

Hi When i Bank or Book a holiday online the web site goes through certain checks at the finish the bank requests a 3 fig security check eg s n a with a slide bar at the side to complete though when i am in firefox the slide bar does not appear thus i can not complete my transaction
Yet when i go to internet explorer that web site allows me to complete also in fire fox the system will not remember my internet bank account ref

Try to reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
If you have increased the minimum font size then try the default setting "none" in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow websites to choose their fonts.
*Tools > Options > Content : Fonts & Colors > Advanced > [X] "Allow pages to choose their own fonts, instead of my selections above"
*http://kb.mozillazine.org/Websites_look_wrong
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Firefox will not let me log into secure sites including Firefox itself. I must use Explorer to get in.

https://support.mozilla.com/en-US/users/activate/76af69c4209a00cc91656d76f9f73929ce65d317
this was the link that was sent to my e-mail address. When I clicked on it it tried to use Firefox to connect me to the link but Firefox would not let me log in. So I copy/pasted it in Explorer and it told me there was a problem that I should check that I clicked the right link and that I typed the address correctly. Please help I would prefer to use Firefox. I have been unable to confirm my e-mail.

Your GMail email is on Google's server, so you should find the same messages there that you saw before. However, any bookmarks, saved passwords, etc. that you did not sync with Weave or another solution that backs up your settings to some place on the web would need to be rescued from your old computer.
Check out this article for more insight: [https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile Recovering important data from an old profile]

PhotoStream: it will not let me set it up to on my iMac

After using my iPad 2 and iPhone 4s I thought I'd replace my Windows 7 PC and get an iMac 21.5,
which I did and have been mostly happy with it. However, the Photo Stream in iPhoto did not show my photos from the other
two mobile devices.
After much trying to get it to work, and reading many helps, I decided to remove all photos from both mobile devices as it appeared
that the Mac needed to be the source of the photos. It took a lot of time making sure precious photos weren't deleted but I did it.
I turned off iCloud on all of the devices, then turned on iCloud on the Mac.. FIRST, then did so on the other two, then turned on
Photo Stream in the same order.
Viola!   NOTHING... I still have all the photos in my iPhoto library in photos and events, and albums.... but I can't get any photos
to 'hold' in Photo Stream in iPhoto.... I must be missing something VERY simple, I can follow directions (usually - trying to keep
my humor that's about depleated).... why does this have to be so difficult?
The next thing I guess I'll do is remove ALL photos from iPhoto and then add them back.
<Edited By Host>

Well, I have egg on my face.....   I thought I had clicked on each of the items on the left last night and none had the verify available. But I just tried again, not wanting to miss anything, and the verify disk permissions was available to me for the Macintosh HD on the 2nd line, and clicked on it. There were differs listed and I've selected repair permissions. Now the permissions repair is complete.
I've attempted to add a photo to photo stream and nothing. It says it's uploading 1 photo but it didn't load, the top left corner no longer says uploading 1 photo, it says No photos.
I just hovered the mouse over the WEB tab and Hide is the only thing that appears.
So, I've made a rational decision - ranting has stopped. It doesn't work for me or I've done something incorrectly in the progression of setting it up and will abandon the iPhoto/photostream program on the iMac. As I've continued to read many, MANY others have lots of issues with the combination, so I don't feel as horrible as I did in past days.
The photo stream is working between my mobile devices, so I'll leave it at that. For the Mac, I'll do as I've done this week... I'll separately load the photos I want to store on my portable backup manually.
Thank you, Dave, for your many hours of assistance. You have been a blessing, even though it didn't work out for me.
Say good night Gracie...
Jackie

Area Type Options window will not let me set a size value above 13.888 in.

Whenever I try to set an Area Type object to larger than 13.888 inches in the Area Type Options window, I'm told that the Value must be between 0 in and 13.888 in. This corresponds to 1,000 pixels.
I have a 24" circle that I am typing in and every time I change the Inset Spacing or Columns it will shrink my shape. I need to be able to change the width and hight options to 24".
Any one know why I can not change this above 13.888?
Thanks

That is a good workaround for my current project, however it is a strange limitation. I would still like to know for future uses if there is a way to alter this setting.

Stream 7 (win) will not let me set it up. Did I get a used machine?

Hi. I unboxed my Stream 7 (win), plugged it in to charge like the instructions said, returned four hours later to find a colorful screen with the wrong time (example: 11:52 when it is actually 4:54 pm). There is no set-up function like the instructions say (I also looked at a tutorial online - this is nothing like the tutorial). Instead I get a blue screen with a blank log-in saying "other user" and no virtual keyboard to enter any data. What gives? Did I receive a used tablet? Seriously, I'm not even to number 3 on the instructions. I attempted to restore the original factory settings but the machine said it was unable to do so. This is not the user experience I was expecting.

If holding the volume down button while powering on and pressing F11 for System Recovery does not work, you might try running the battery all the way down (or unplugging the battery) to reset the CMOS. More detail is here. I have seen that fix System Recovery and assorted startup problems. If that does not work, you might just return it for a replacement.

Ibook will not let me set up computer

When i turn the computer on the startup video plays the the registration begins. When it gets to "how do you connect" I select my wireless network, click continue. The button grays out and the only option is to go back! I dont know what to do

Thank you for a very quick response! btw it is an ibook g4-
After trying and trying i turned to google and i found this--
Hold down Command-S at startup to enter single-user mode
at the command prompt, enter the following
fsck -y (to check disk)
mount -uw / (to mount hard drive as writable)
nicl -raw /var/db/netinfo/local.nidb -create /users/root passwd
(to enable a root user with no password)
touch /var/db/.AppleSetupDone
(to fool Setup Assistant into thinking it has been
run)
exit (to continue booting normally)
Then log in with "root" as username and leave the password blank. Go to system preferences and create a new user.
This worked for me, but thank you so much for trying!

I have a sync account but it will not let me set it up

I dont seem to have this feature add a device. where is it?

Thanks for your responses,
but I am not worried about any music on my ipod touch, I have not even ever purchased a song from itunes, but only copied my own personal music cds.
I need to get to my pictures and videos.
Thanks

WRT54G V8 will not let me set wireless security

Similar Messages

Maybe you are looking for