WRT54G Ver. 5 192.168.1.1 won't work

Hello I have a WRT54G Ver. 5 when i reser it the 192.168.1.1 page would work for 1-2 days and then the other 2-4 days it loads the 192.168.1.1 page really slowly and sometimes does not load everything and on like the 5th day it just shows a blank page but it does asks you for the login password and login
The router is scuered with WPA2 Personal with TKIP+AES Algorithms.
The router is up to date on the firmware version v1.02.7 and i had this problem
on the firmware befor

You can try to Clear the Browser Settings of your IE (Delete Cookies, Offline Files, Temp Files) and also on your Computer Disable the Firewall and Antivirus on your Computer... and then try and see if you are able to access the setup page of your Router...
If that still doesn't then you can try to reset your router and re-configure all the settings on it from scratch......

Similar Messages

I uninstalled ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

I uninstalled and deleted ver 11, installed ver 10.7 because ver11 won't work on my XPsp3 machine with my vinyl conversion software to mp3, but upon launch i get :"itunes library.itl cannot be read because it was created with a newer version of itunes'.

Hello, Stephen.
Thank you for the question. You will need to rebuild your iTunes library file in order to open an older version of iTunes. Below, I have included the article that walks you through this process. Start with the section labeled Re-creating the iTunes Library file.
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/ht1451
Cheers,
Jason H.

Linksys WRT54G Ver.6 not connecting (but internet is working through modem)?

I have the following router and the internet is not working through it though its working when I connect my Mac directly to the ISP's modem.
I did update the router to the latest firmware, I have had this router for the past 4 years. My friends other computer which is a vista and my iPhone is not able to get the Internet either. But it's connecting to the network with strong signal
status I'm able to see the ip adress,subnet mask etc
please help

As you upgraded the router's firmware,Reset the router and try to re-configure it from scratch.
If your Internet Service Provider is Cable follow this link to configure the router.
If your Internet Service Provider is DSL follow this link configure the router.

WRT54G ver 6.0 problems

I have a good internet connection when I hook the CPU direct from cable modem but every time I try to connect the router I get Limited to no Connectivity. I have tried reseting, and disconnecting and I still can't got online.
I can talk to other computers on the network but can not go online. I have to unplug from the router, and plug into the modem directly to go on line.
I have reset both the modem and router to default, and it still won't work and it did before.
Thanks
Ken

Your problem is that your modem and router are using the same 192.168.1.x address space.
Disconnect the modem and router. Then, using a computer that is wired to the WRT54G, login to the WRT54G at 192.168.1.1 and change the "Local IP address" to 192.168.2.1 then click on the "Save Settings" button. Wait 3-60 seconds for the screen to refresh. You will likely be disconnected from the WRT54G. Exit your browser and power down your computer and the WRT54G.
Next, reconnect the modem to the Internet port of the WRT54G. Your system should work. If not, in your computer, temporarily turn off your software firewall, including Windows Firewall, and see if that helps. If you still have trouble, login to the WRT54G and verify that "Internet connection type" is set to "DHCP automatic".
Message Edited by toomanydonuts on 06-03-2008 02:53 AM

WRT54G ver 6, serious issues

I recently bought a WRT54G, ver 6. For a while, it worked. We were happy. Now, we have a wireless connection, but are unable to load any websites.
Regularly resetting the router seems to work, for short periods of time (5-20 minutes, if that).
Our firmware is current, we've spent time on the phone with Linksys (Hi, India!), and everything seems to be correct.
All the computers have Windows XP, ISP is D&E Communications, we have cable internet. We've upgraded drivers and/or wireless cards, to no effect.
In addition, we have one laptop connected to the router via ethernet cable. That computer is unable to access webpages when the other computers are unable to access anything through the wireless network.
Any help would be great, since we're getting very close to returning the router and spending a few more hours on the phone with Linksys to get our money back - the router is less than a month old. This much difficulty is unacceptable.

Did you try going to the administration menu in the web setup page? then to diagonistics sub menu ---> then to ping button --> after which new window appears, where in you can type in any domain name like www.google.com and clcik on ping to check the connectivity. If you get the response then you have the internet connection till your router. If you are able to get response from ping then instead of providing dynamic ip to the pc's you can check with static ip. if it works then something is wrong with DHCP lease.

Three new Macs ... iChat video won't work over WAN

Hi,
We just bought two iMacs and a MBP, all running Leopard. We can iChat when in the same house on the same wireless network, but when we go back to our homes, it doesn't work. Below is the error. We can use Skype video no problem. iChat text works works fine. We've reinstalled iChat, matched or unmatched the font, reduced the bandwidth in iChat, etc. We haven't altered the router settings. Hope someone has a suggestion. Thanks.
Date/Time: 2008-01-23 20:35:51.339 -0800
OS Version: 10.5.1 (Build 9B18)
Report Version: 4
iChat Connection Log:
2008-01-23 20:35:06 -0800: AVChat started with ID 4010006563.
2008-01-23 20:35:06 -0800: 0x1020e7f0: State change from AVChatNoState to AVChatStateWaiting.
2008-01-23 20:35:06 -0800: [email protected]: State change from AVChatNoState to AVChatStateInvited.
2008-01-23 20:35:38 -0800: 0x1020e7f0: State change from AVChatStateWaiting to AVChatStateConnecting.
2008-01-23 20:35:38 -0800: [email protected]: State change from AVChatStateInvited to AVChatStateConnecting.
2008-01-23 20:35:48 -0800: 0x1020e7f0: State change from AVChatStateConnecting to AVChatStateEnded.
2008-01-23 20:35:48 -0800: 0x1020e7f0: Error -8 (Did not receive a response from 0x1020e7f0.)
2008-01-23 20:35:48 -0800: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2008-01-23 20:35:48 -0800: [email protected]: Error -8 (Did not receive a response from 0x1020e7f0.)
Video Conference Error Report:
Video Conference Support Report:
0.000000 @SIP/Transport.c:2353 type=1 (00000000/0)
[SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.1.5;branch=z9hG4bK3b770bb024da23e4
To: 0 <sip:[email protected]:16402>;tag=396488263
From: u0 <sip:[email protected]>;tag=333292834
Call-ID: ea0f44a8-c7e1-11dc-92bd-db1e6e2c13c4@192-168-1-5
CSeq: 1 INVITE
Contact: <sip:[email protected]:16402>
User-Agent: Viceroy 1.3
Content-Type: application/sdp
Content-Length: 430
v=0
o=sanaebingham 0 0 IN IP4 192.168.1.7
[email protected]
c=IN IP4 192.168.1.7
b=AS:2147483647
t=0 0
a=hwi:1056:2:2000
a=bandwidthDetection:YES
a=iChatEncryption:NO
m=audio 16402 RTP/AVP 12
a=rtcp:16402
a=rtpID:466551867
m=video 16402 RTP/AVP 126
a=rtcp:16402
a=rtpmap:126 X-H264/90000
a=RTCP:AUDIO 16402 VIDEO 16402
a=fmtp:126 imagesize 0 rules 20:320:240:640:480
a=framerate:20
a=rtpID:3880118170
0.006753 @SIP/Transport.c:347 type=2 (00000000/0)
[ACK sip:[email protected]:16402 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.5;branch=z9hG4bK7244f8cd57b3278a
Max-Forwards: 70
To: 0 <sip:[email protected]:16402>;tag=396488263
From: u0 <sip:[email protected]>;tag=333292834
Call-ID: ea0f44a8-c7e1-11dc-92bd-db1e6e2c13c4@192-168-1-5
CSeq: 1 ACK
User-Agent: Viceroy 1.2
Content-Length: 0
0.007382 @SIP/Transport.c:2353 type=1 (00000000/0)
[SUBSCRIBE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.7:16402;branch=z9hG4bK25d964740defe840
Max-Forwards: 70
To: u0 <sip:[email protected]>;tag=333292834
From: 0 <sip:[email protected]:16402>;tag=396488263
Call-ID: ea0f44a8-c7e1-11dc-92bd-db1e6e2c13c4@192-168-1-5
CSeq: 1 SUBSCRIBE
Contact: <sip:[email protected]:16402>
Event: conference
Expires: 3600
User-Agent: Viceroy 1.3
Content-Length: 0

We do agree that there is a good possibility that the log that was posted is from a Bonjour (ie; local) iChat session.
The 192.168.1.x subnet is part of an address block assigned by the authorized addressing body as Private addresses. They should not be advertised on the public Internet and are NOT routeable across the public Internet. Also, when you mention other logs in these discussions, aren't most of the logs and/or discussions here of scenarios when something does not work ?? Can you refer to a known, good, working iChat video-chat log going across a WAN/Internet (not a local LAN or Bonjour) that shows both the To: and From: IP addresses as 192.168.x.x ? The bottom line is if the actual transmitted SIP:invite packet (not some possibly inaccurate Log message) has a 192.168.1.x address as the destination IP, I do not think it will work. Some of the Logs that iChat provides do some processing or filtering such that I am not sure that it is an actual packet capture/decode.
Again, I am certainly open to learning something, but my understanding is if the packet put onto the wire is destined to be routed across the Internet to another user behind a NAT router, a destination IP (or a To: address) of 192.168.1.x will not work.
The process when going across the Internet , as I understand, is very simple;
- login to OSCAR server on "typical" port 5190
- after OSCAR authentication, login to BOS server, get Buddy List, "self info" such as publicly visible IP address, etc...
- initiate Chat request to a Buddy (example userB)
- send Chat request message to BOS server requesting Chat with userB, still on port 5190. Chat request includes data indicating the userA public IP address and public SIP signaling port number. UserA may have obtained this info via communication with the SNATMAP server, where it sends a message fom a private (ie; 192.168.x.x.) source IP address and private source port number to the SNATMAP server, which then sends back a message telling the userA what IP and Port were actually received...in other words, the publicly visible IP and port that the NAT router translated the private ones to. Typically the private ones would be 5060, 16384-16403..but others are possible.
- BOS server relays Chat request to userB, including "rendez vous" data which has userA IP address and SIP signalling port number.
- UserB may send back a message via the BOS server to the userA indicating its public IP and public SIP signaling port number as well.
- One end can now initiate the SIP:invite message with the Destination IP and port# equal to the PUBLIC IP/port that was sent in the Chat request
- The public port# should be open since the userA/B would have sent messages to the SNATMAP server so as the "open" the port on the NAT router.
- The SIP:invite message will have an SDP section that will indicate which port numbers to use for Audio, Video, Audio Contol, ad Video Control. Again, these should be the "publicly" visible (ie; Internet side of the NAT router) ports as learned via SNATMAP (or other methods such as UPnP..). The internal values for these ports are typically 16384,16385,16386,16387 for Tiger and 16402 for Leopard. The publicly visible values depend on the specific NAT router and how it translates internal address/port numbers.
- Once each end receives the SIP:invite and SIP:ok with the SDP session parameters, they will negotiate audio, video, etc..parameters..and if they agree, it should work.
The key n all of this is to get the correct SIP signaling port number, and then the correct SDP session attributes which include the A/V and A/V control (ie; RTP, RTCP) port numbers. And, finally these must be public, Internet routeable addresses in order to work across the Internet.

Changed my 192.168.1.1 to 192.178.1.1 and i can`t log into setup in WRT54G v5 via navigato

changed my 192.168.1.1 to 192.178.1.1 and i can`t log into setup in WRT54G v5 via browser
How can i reset the router to initial manufacturer`s state?

At back panel of router u have a reset button ........... keep it pressed for 30 sec...... unplug & plug power to router ........... it will set to default 192.168.1.1....
Tell me if it works or not.........

Wrt54g ver. 6 router won't stay on

I have a wrt54g ver. 6 router and it won't stay connected with the internet for more than 24 hours. Every time i come home from work I find my router unable to access the internet. I can connect to the internet if i am wired directly to the modem but my router refuses to work. I can fix this problem by unplugging and then replugging in my modem and router but my router will become unable to function again within 24 hours. i have tried changing between the channels 1, 6, and 11 but that does not seem to work. what should i do?

hi...ensure that u have the latest firmware on the router..also , try changing the ssid and under "advanced wireless settings" , change the beacon interval - 50 and reduce the fragmentation and RTS by 40......

After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

OK, I found this thread which answered my question.
http://discussions.apple.com/thread.jspa?messageID=610763&#610763

WRT54G v.1.1 can't get on my interface "192.168.1.1"

Hello, I'm having problems getting into my user interface, and I can't get on any website with my router connected, I try using 192.168.1.1 on internet i.e. and firebox. I also got my default IP through, ipconfig/ all and that did not work, I also try to renewed my IP with ipconfig/renew, no go. All my connections are the way they should be, I even try connecting my router by itself to my PC change the IP address and nothing. Can't someone please help, my router was working when I first plug it but I forgot my wep security and press the reset button on the back and that's when everything started to fail..............

As you want to Upgrade your router's firmware you can try the TFTP Utility...
Download TFTP Utility 36.0 KB...
Download Firmware 2.95 MB...
Double click the TFTP.exe file and click run :
For Server- Enter the IP Address of the router that you assigned. By default, the router is 192.168.1.1...
For Password- Enter the password you assigned the router. By default, the router’s password is “admin”.
For File- Click the triple “…” button and browse for the .bin firmware file...
Click Upgrade button to start upgrading. A progress bar should show up to show the progress.
Once the Upgrade is done press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

WRT54G can''t connect to internet or 192.168.1.1

My router used to work. I updated the firmware to 4.21. xx and after that I can't connect to internet.
When I connect directly to modem, I can go to the internet . I power recycled etc but when I connect to the router, it says limited connectivity. It shows autoconfigurtion ip:169.254.251.135
I don't know why this is so.
I don't have the setup cd disk but I read the users' guide and it seems that I really don;t need the cd. But no matter what I do , I can't get to 192.168.1.1 .
Do I need a setup cd and where I can download?
Any help is appreciated.
Thanks ,
Sankar

Do the 30/30/30 Hard Reset and then check the IP address on that computer. For the reset steps do the following:
The following procedure will clear out the NVRAM and set Router back to default values:
With the unit powered on, press and hold the reset button on back of unit for 30 seconds
Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
Plug the unit back in STILL holding the reset button a final 30 seconds....
If still you are getting same IP address then try to reduce the LAN card speed. Here is the step:
START--> right-click My Network Places and click Properties
right-click on the device and click properties
Click on the CONFIGURE button
Select the ADVANCED tab and the settings you can alter are listed on the left.

WRT54G Extremely slow navigating pages @ 192.168.1.1 - Could this be a network card problem?

Friend of mine is having Internet connection issues on his main PC which is hard wired to the router, He's using Comcast cable (18Mbit) and all of a sudden today the speed dropped to dialup speeds, literally, however its ONLY this main pc with the speed issue, there are 2 other computers connected wireless to the router and they are running full speed when testing on speedtest.net
While troubleshooting the problem I tried bypassing the router and the speed issue still remains, So I can pretty much rule out the router, But as part of my troubleshooting whenever I try to access the router's configuration pages via 192.168.1.1 it is VERY slow at responding.
For example when hitting enter after typing 192.168.1.1 it takes around 45 seconds to display the router configuration page, and at that point clicking on any other tabs takes 30 - 45 seconds as well to respond.
So my main question with this post is, is it possible his network card went bad? What would cause really slow access to the router configuration?
The PC is running Win 7 Ultimate 32bit and Ive tried running the network troubleshooter, uninstalled his network card in device manager / reinstalled the drivers but nothing seems to be working.
I also ran Malware Bytes and scan results were clean.
Any ideas appreciated!
Solved!
Go to Solution.

can you "borrow" a card? its the only way to be sure, eliminating hours of trial and error procedures. one of the mega electronics stores is a good source, if it solves your problem you keep the card, if not there is the return option
ps. i am not a tech, i just play one on tv!
pps. free speech is a human right! join Reporters Without Borders (http://en.rsf.org/) and help save the planet from censorship predators!

WRT54G ver 2 Mac and PC issues

I have...
a WRT54G ver 2, firmware v4.21.1 (latest available for this model),
two PC desktops wired (192.168.1.101) - second desktop not used much),
a PC laptop wireless (169.254.58.14),
a Mac Desktop wireless (192.168.1.104),
and 2 Mac Laptops (169.254.75.54) (169.254.254.36).
The problem is...
When one of the wireless computers is turned on it won't connect unless the router is powered down and back on. It will be fine until one of the other wireless computers are turned on and now it doesn't connect. It is possible to get them all simultaneously connecting, but difficult. It seems to be in the timing. I still haven’t nailed it down. Frustrating...
The questions...
Did I give enough information?
Can I do what I want with this router or do I need to upgrade?
If can do, what settings?
If can't, new hardware recommendations?
Thanx

castor wrote:
okay... go to www.linksys.com/download and download the latest firmware for the router, try upgrading/reflashing firmware on the router...after reflashing/upgrading firmware on the router reset it and reconfigure it according to ISP settings...on the router's setup page click on wireless tab and try changing channel to 11, click on advanced wireless settings, reduce beacon interval to 50, fragmentation and RTS threshold to 2304, also transmission rate to 54Mbps and save the settings...power cycle the entire network and check whether it works or not and let me know.
Thanks! I had already downloaded and installed the latest firmware, but it didn't really help. I set the parameters you described, and bam, all wireless devices work. I shut down and restarted each one to verify, and they can access the network!
Again, Thanks a lot!

WRT54G(ver.6) not broadcasting internet signal anymore.

I've been using my router (WRT54G ver.6) for almost 2 years now with only a few minor hiccups along the way. Just recently the router won't send the internet signal anymore. I can still connect to the wireless network and use the printer, which is connected to port 1.
Connected computer directly to the cable modem - Internet works fine.
Wired modem to router then wired modem to computer(tried all ports) - still no internet.
Checked all my cables - they're fine.
All the lights on the router are responding appropriately. I now know that the problem is only the wireless router.
I've tried practically EVERYTHING!!; holding the reset button for 30secs - 2mins, unplugging the router for days on end, upgrading then downgrading then upgrading firmwares again, jumping on one leg while holding my breath, and all different combinations in between!!!
I have the latest firmware and even tried using a previous firmware but still no go.
Also tried the "Mac Address Clone" and still didn't have IS/subnet numbers for the internet under the "Status" tab. (I don't know if I ever had numbers there).
My ISP is Comcast.
I'd appreciate any help, thanks.

Configuration for cable connection:-
Before doing the following steps, you have to connect the modem to the
router's Internet Port and the computer to the Ethernet Port Number 1.
Step 01 : - Reset the router
1. Press and hold the reset button for 30 seconds.
2. Then, unplug the power keep holding down the reset button for
another 30 Seconds.
3. Plug back the power back in, and keep holding down the reset button
for 30 Seconds.
4. Release the reset button.
Step 02 : To Configure the router for Wired Connection.
Please access the setup page of the router by launching an Internet
Explorer and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as “admin "" all in lower cases and then
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
- Click on clone your PC's MAC button and then click on the Save
Settings button.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

WRT54G Ver. 5 192.168.1.1 won't work

Similar Messages

Maybe you are looking for